Säulenbohrmaschinen Baureihe GS
Einstiegmodell der Säulenbohrmaschinen
Einstiegmodell der Säulenbohrmaschinen
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Punkt für Punkt Pluspunkte:<br />
Advantages of our Machines:<br />
● stufenlos regelbarer Antrieb mit Zahnradvorgelege im Ölbad<br />
Infinite variable speed drive with gear mechanism in oil bath<br />
● Einhand-Vorschubeinrückung über Handkreuz<br />
One-hand feed clutching with cross handle<br />
● großer Spindelhub<br />
Big spindle stroke<br />
● Stabilität durch Kurzspindel<br />
Stability through short spindle<br />
● nachstellbare Tischführung<br />
Adjustable table guide<br />
Vorschubeinrückung bei<br />
<strong>GS</strong> 30 V / <strong>GS</strong> 40 V<br />
Feed clutching at<br />
<strong>GS</strong> 30 V / <strong>GS</strong> 40 V<br />
● Schnellspannhebel für Motorriemen<br />
Quick tensioning lever for motorbelts<br />
● Führungsstein gegen seitliches Verdrehen der Pinole<br />
Sliding stone to prevent lateral twisting of spindle sleeve<br />
● digitale Drehzahlanzeige<br />
Digital speed indicator<br />
● Grundplatte bearbeitet mit T-Nuten<br />
Base plate preworked with T-slots<br />
Serienmäßige Ausstattung:<br />
Standard Equipment<br />
- Hand-Vorschub (nur bei <strong>GS</strong> 30 H)<br />
Hand feed (only for <strong>GS</strong> 30 H )<br />
- Einhand-Vorschubeinrückung über<br />
Handkreuz (<strong>GS</strong> 30 V / <strong>GS</strong> 40 V)<br />
One-hand feed clutching with cross handle (<strong>GS</strong> 30 V / <strong>GS</strong> 40 V)<br />
- Hauptschalter abschließbar<br />
Main switch with locking device<br />
- Motorvollschutz<br />
Motor full protection device<br />
- Not-Aus-Schalter (verrastend) in der Frontplatte<br />
Emergency off-switch in front plate<br />
- Drehzahlanzeige digital<br />
Digital speed indicator<br />
- Schutzart IP 54<br />
Electrical isolation IP 54<br />
Abb.: <strong>GS</strong> 30 V mit Optionen<br />
Pic.: <strong>GS</strong> 30 V with options<br />
- Betriebsspannung 400 V, 50 Hz<br />
Operating voltage 400 V, 50 cycle<br />
- Steuerspannung 24V<br />
Control voltage 24V<br />
- Spindelschutz schwenkbar, mit Mikroschalter<br />
Spindle protection, swivelling with microswitch<br />
- Ausführung nach VDE und UVV<br />
Equipment according VDE and UVV-rules<br />
- Lackierung: RAL 7035 lichtgrau / RAL 7016 anthrazit<br />
Painting: RAL 7035 / RAL 7016<br />
- Drehzahlverstellung stufenlos<br />
Infinite variable speed drive<br />
- Konusaustreiber DIN 317<br />
Drift pin DIN 317<br />
- Rechtslauf über Schützsteuerung<br />
Clockwise spindle rotation by contactor contro