Montagevoorschrift en gebruiksaanwijzing Montage ... - Twinny Load

32
Placing the bike carrier for assembly
Tip: The assembly of the bicycle is easier when it is placed on the bullet.
Place the bicycle carrier on the bullet 1 , tighten it horizontally 2 , raise the handle 3 , tighten it
horizontally 4 , repeat steps 2, 3 and 4.
Assembly of light bar
2 x
1
3 4
spanner 10 mm
allan key 5 mm
Assemble the clamps 1 , place the cover 2 , insert the bolts 3 , place the bolt spacer 4 , position
and tighten the light bar 5 .
1
2 x
2
2