Montagevoorschrift en gebruiksaanwijzing Montage ... - Twinny Load

36
Placing the Assembled carrier
When the bicycle carrier is
already assembled, place it as
follows 1 .
Lock the carrier 2 .
Lowering the carrier
Loosen the second lock 1 , place the crank 2 , rotate the bicycle carrier down 3 , end position on
the ground 4 .
✘
1
1 2
3 4
Attention!
When it is rotated up for the
first time without bicycles, the
carrier is not yet “set”. The base
frame will then sometimes not
fall into the second lock opening
1 . To prevent this, you must
apply pressure on the light bar
when rotating the carrier up 2 ,
so that the base frame falls into
the second lock opening 3 .
✔
1 2 3
2