Corporate Identity Management - Stier Communications AG

Corporate Identity
– Corporate Brand
– Corporate Design
– Corporate Communication
– Corporate Imagery
Umsetzung der Massnahmen
– Logo-Redesign
– Website
– Inserate
– Imagebroschüre d/e
– Jahreskalender
– Schreibmappe/Block
– Displays
PACKAGINGBLISTERS
Packaging Sheet
Imagebroschüre
2 FRÜH VERPACKUNGSTECHNIK BLISTERS
BLISTERS
FOR PHARMACEUTICALS AND MEDICAL PRODUCTS
Blisters are an ideal form of packaging for every kind of medical
“hardware” – from implants and catheters to surgical instruments.
The form adapts exactly to the contents : a key requirement for
optimum protection.
Individual engineering
are packed in blisters as well, and even larger
Every packaging project is different – not devices such as catheters – dimensions of
least in the case of blister packs. Depending up to 700 mm can be accommodated. The
on the articles to be packaged, it is important finished blister packs can be delivered as
to choose the right material, form and colour complete sheets, or punched out as indi-
of the finished packaging. We have the right vidual units. They can be produced in clear
specialists and modern machinery to develop or coloured materials, depending on the
and produce exactly the type of blister pack- specific requirements.
aging you require.
Customization and blisters for
in-house requirements
Blister packs are an increasingly important
form of packaging: individually formed by
deep drawing, with male or female tools,
to fit specific contents; or as versatile and
cost-effective prefabricated blister packs,
for example as sturdy primary and secondary
packaging.
Blisters are also ideal for small parts requiring
special protection: for example, precision
tools and scalpel blades. Medical implants
FRÜH VERPACKUNGSTECHNIK AG
Allmendstrasse 47 8320 Fehraltorf (Switzerland)
Phone +41 58 258 22 11 Fax +41 58 258 22 00
mail@fruh.ch www.fruh.ch
Clean-room production, optional
sterilization
All blisters are produced under sterile conditions
in class 7 (10,000) clean rooms.
The finished blisters can be sterilized using
any of the commonly used processes – with
gamma rays or superheated steam (autoclave),
ethylene oxide or plasma.
Blister packs from various materials
· Polypropylene types
· Barex ®
· PET-G
· PET-GAG
| 23
concept by www.stier.ch