European Technical Approval ETA-10/0425 - Etanco
European Technical Approval ETA-10/0425 - Etanco
European Technical Approval ETA-10/0425 - Etanco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Page 12 of <strong>ETA</strong>-<strong>10</strong>/<strong>0425</strong>, issued on 13.12.20<strong>10</strong>, English translation prepared by ZAG<br />
h1 = depth of drill hole to deepest point<br />
hnom = overall plastic anchor embedment depth in base material<br />
h = thickness of member<br />
ttol = thickness of non-structural layer<br />
tfix = thickness of fixture<br />
FM-X5<br />
Intended use<br />
Annex 1<br />
of the <strong>European</strong> <strong>Technical</strong><br />
<strong>Approval</strong><br />
<strong>ETA</strong>–<strong>10</strong>/<strong>0425</strong>