Everything fits – and your safety is guaranteed - Hazet
Everything fits – and your safety is guaranteed - Hazet
Everything fits – and your safety is guaranteed - Hazet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
18<br />
19<br />
1786 F<br />
B<br />
K1<br />
6108-1 CT<br />
8<br />
4<br />
0<br />
0.4<br />
MODE<br />
LIMIT<br />
ZERO<br />
UNIT<br />
RESET<br />
N.m lbf.ft. lbf.in<br />
Brake Bleeding Set<br />
Brake Adjusting Lever<br />
Brake Fluid Tester<br />
Brake P<strong>is</strong>ton Readjusting Set<br />
Tube Flaring Tools<br />
Files<br />
Tools for H<strong>and</strong> Brakes<br />
<strong>and</strong> many more …<br />
Brake Pressure Regulator <strong>and</strong><br />
Wheel Bearing Socket<br />
QRC<br />
• 6-Point Socket<br />
• For adjusting of torsion bars<br />
<strong>–</strong> installation of brake pressure regulators<br />
<strong>–</strong> removing of wheel bearings on VW transporter T4<br />
• j drive 12.5 = 1 ⁄2”<br />
• Chrome-Vanadium<br />
• Surface: matt chrome-plated<br />
Made in Germany<br />
1 K S 4<br />
2583 140 27 017034<br />
Brake Calliper Screwdriver<br />
Socket<br />
Specialty Tools <strong>–</strong> Brakes<br />
B<br />
Brake Calliper Screwdriver<br />
Socket<br />
C<br />
Brakes<br />
• For the operation of the brake calliper screws at the<br />
rear axle Ä 8 mm on: AUDI TT since 2007, A4 since<br />
2001, A6 since 2005, A8 since 2003<br />
• For controlled screw tightening please use torque<br />
wrench with 10 mm = 3 ⁄8” drive,<br />
e.g. HAZET 6110-1 CT<br />
• With fix blade (size 8 mm) for inside hexagon<br />
screws<br />
Made in Germany<br />
1 F M N S 4<br />
2584-8 19 7 24 8 149438<br />
Ingenious Tools<br />
Components <strong>and</strong> Spare Parts see pages 275 to 281 221<br />
1979-3<br />
R<br />
• For the operation of the guide bolts Ä 7 mm at the<br />
rear brake callipers on: MERCEDES-BENZ, type<br />
204 (C-Class)<br />
• For controlled screw tightening please use torque<br />
wrench with 10 mm = 3 ⁄8” drive, e.g. HAZET<br />
6110-1 CT<br />
• With fix blade (size 7 mm) for inside hexagon<br />
screws B<br />
Brake Calliper Screwdriver<br />
Socket<br />
C<br />
Made in Germany<br />
1 F M N S 4<br />
2784-1 19 7 24 7 148530<br />
R<br />
R<br />
RU<br />
For the operation of the brake calliper screws<br />
(Knorr-Bremse) on MERCEDES-BENZ commercial<br />
vehicles e.g. Actros<br />
• Enables controlled screwing with the torque<br />
value required by the manufacturer<br />
(Follow manufacturer’s instructions)<br />
e.g. with torque wrench HAZET 6144-1CT<br />
• Drive allows transm<strong>is</strong>sion of high<br />
separation forces<br />
• j drive 20 = 3 ⁄4”<br />
• b 14 mm<br />
Made in Germany<br />
1 M N S 4<br />
2784-14 60 110 14 155583<br />
Brakes