LiedecoPlus ® Pleated blinds

Model overview
Freely suspended system
Use: Rectangular windows
Braced systems
Use: Rectangular windows
Technical Data:
Type PS10
Pleated blind with draw cord, freely
suspended with an upper rail, package
attached to upper rail.
Type PV10
Pleated blind and operating
handle braced with an upper
rail and 2 clamping fixtures
below, package attached to
upper rail.
Type PV21
Pleated blind and operating handle
braced with an upper rail and 2 lower
clamping fixtures, package freely
moveable.
Type PV24
Pleated blind with operating handle braced
with 2 clamping fixtures above and
below, package freely moveable.
Max. ordering sizes PS10 PV10 PV21 PV24
Width min. 30 cm 15 cm 15 cm 25 cm
Width max. 230 cm* 150 cm 150 cm 150 cm
Height max. 250 cm 250 cm 250 cm 250 cm
*depending on fabric width
RAIL COLOURS
white = standard / alternative: silvergrey, anthracite-metallic, dark brown
Measurement allowances
Bestellbreite I B
Bestellbreite I B
Bestellbreite I B
Bestellbreite I B
Bestellbreite I B
Bestellhöhe I H
Bestellhöhe I H
Bestellhöhe I H
Bestellhöhe I H
Bestellhöhe I H
Installation in the window frame
Ordering width: Glass size minus 0.5 cm
Ordering height: Glass size minus 0.5 cm
Installation with clamp holders
Ordering width: Glass size plus desired over
hang. Take account of
handle.
Ordering height for braced systems:
Casement height minus 2 cm.
Ordering height for freely-suspended systems:
Casement height minus 1 cm.
Installation on the window frame
Ordering width: Glass size plus desired
overhang. Take account of
handle.
Ordering height: Glass size plus desired over
hang.
Wall mounting in front of alcove
Ordering width: Alcove width plus desired
overhang.
Ordering height: Alcove size plus desired
overhang at the top. Take
account of the window ledge,
which may protrude.
Model Overview of Special Shapes
Braced systems
Use: Windows with special shapes
Freely suspended system
Use: Windows with special shapes
All special shapes can also be reversed left-to-right.
Technical Data:
Type PV80.1 Pentagon
Pleated blind with operating handle for
pentagonal windows, braced. The fabric
can be pushed upwards.
Type PS43 Slope
Pleated blind with draw cord for windows
with a slope, freely suspended.
The fabric can be raised to the apex
by means of a draw cord. Operated on
the short side.
Type PS45 Triangle
Pleated blind with draw cord for triangular
windows with a slope, freely suspended.
The fabric can be raised to the apex
by means of a draw cord. Operated on
the long side.
Max. ordering sizes PV80.1 Pentagon PS43 Slope PS45 Triangle
Width min. 35 cm 40 cm 40 cm
Width max. 150 cm 230 cm 230 cm
Height max. 250 cm 250 cm 200 cm
Top horizontal width min. 12 cm - -
Width of sloping part max. - 220 cm* 220 cm*
*depending on fabric width
Schienenfarben:
white = standard / alternative: silvergrey, anthracite-metallic, dark brown
Note
A sketch must be provided
Installation in the glazing rebate
Clearance glass dimensions without
deductions. Deductions will be made at
the plant.
Installation on the window frame (with clamp holders)
Ordering width: Glass pane sizes plus desired overhang
widthways
Ordering height: Frame upper edge to frame lower edge.
System dimensions are determined at the
plant.
Installation on the window frame (with angles)
Pleated Blinds
Measurement allowances for special shapes
H 1
C
B 2
B 1
W1: Width 1 in cm
finished dimensions
W2: Width 2 in cm
clearance dimensions
H1: Height 1 in cm
H2: Height 2 in cm
C: Diagonal measurement in cm
Ordering width: Glass pane sizes plus desired overhang.
Ordering height: Glass pane sizes plus desired overhang.
H 2