Premier® Implant Cement™ - Premier Dental

Premier ® Implant Cement
Secure Retention. Premier Implant Cement offers the strength
and durability of resin cements, assuring long-term performance for
permanent implant-retained restorations and long-term provisionals.
Premier Implant Cement will not wash out!
Retrievability. Polymer elasticity and a non-eugenol formula
make Premier Implant Cement ideal for long-term temporaries and any
implant-retained crowns that may require adjustment or re-treatment.
With no chemical bonding, crowns can be removed more easily – if needed.
Easy to Use. The automix syringe ensures controlled dosing and the
unique two-stage autocuring makes seating the restoration and removing
excess cement quick and simple.
To view a brief tutorial, visit www.premusa.com
Premier® Dental Products Company • 888-670-6100 • 610-239-6053 • www.premusa.com
Cosmetic • Endo/Restorative • Hygiene/Perio • Instruments • Prosthetic
Secure retention and retrievability
in one unique cement.

Premier ® Implant Cement
3001450 Implant Cement Standard Pack
One 5ml Automix Syringe, 10 Mixing Tips
and one Mixing Pad.
3001455 Implant Cement Value Pack
Three 5ml Automix Syringes, 25 Mixing Tips
3001451 Mixing Tips
25 Automix Dual-Barrel Syringe Mixing Tips
Order through your authorized dealer.
Dry and isolate the
prepared abutments.
For optimal
retrievability,
lubricate abutment
with water-based
lubricant.
Working Time 1.5 minutes at room temperature
Gel-Phase 2 - 2.5 minutes at 98.6˚F (37˚C)
Set Time 4 - 5 minutes at 98.6˚F (37˚C)
Film Thickness 15 µm
PREMIER® IMPLANT CEMENT
1 2
3
4 5
IS EASY TO USE PERIOWISE®
Bleed the syringe.
Mount a new automix
dispensing tip and
bleed the syringe
again. Syringe a thin
layer of the cement
directly into the restoration.
1.5 minutes
working time at room
temperature.
FEATURES AND BENEFITS
• High retention Long-term cementation
• Retrievability Off when you need it,
lubricating prior to cementation simplifies removal
• Radiopaque* Improves detection of excess cement
• Low solubility Good marginal seal / No washout
• Virtually no taste or odor Increased patient comfort
• Easy clean-up Cement is easily removed from restoration
• Easy handling
Two-stage cure features initial gel-phase in 2 - 2.5 minutes for
easy removal of excess cement. Rigid final set ensures marginal
seal and firm retention.
• Automix syringe and disposable mix tips
Consistent product mix and controlled dispensing save time
PROPERTIES
“86% of... 21 Evaluators stated they would incorporate this product into their office,
and 100% rated it excellent or good and worthy of trial by colleagues.”
An Independent Non-Profit Education and Product Testing Foundation, 10/04
* Radiopacity improves detection of excess cement in the mesial/distal directions; however,
the implant, abutment and/or restoration may mask excess cement in the buccal/lingual view.
Seat the crown and
hold in place.
In 2 - 2.5 minutes,
excess cement reaches
a distinct gel phase
and can be removed
safely using a Premier®
Implant Scaler.
•
Final cement set is
between 4 - 5 minutes.
Premier® Dental Products Company • 1710 Romano Drive, Plymouth Meeting, PA 19462, USA
Phone 888-670-6100 • 610-239-6053 • Fax 610-239-6171 • www.premusa.com • E-mail: dentalinfo@premusa.com
Restored implants can
be difficult to identify.
PerioWise® autoclavable
probes are safe for use
around implants.
8621282 101166 Rev6 TRI10M