Fire Performance Cables - nr engineering co.,ltd.

Recommendations

Info

CONSTRUCTION OF CABLE 18 Construction 1 - Conductor Stranded annealed copper 2 - Insulation XLPE or Low smoke halogen free (LSF) compound 3 - Shield* Aluminium foil with tinned copper drain wire 4 - Filler* LSF filler or polypropylene split yarn 5 - Binder Tape* Polyester tape 6 - Bedding* Low smoke halogen free (LSF) compound 7 - Armour*/# Galvanised steel wire (aluminium or copper wire for single core) 8 - Sheath Low smoke halogen free (LSF) compound * Optional: Depending on requirement # Braided armour also available on request Identification of cores: No. of cores Single Two Three Four Five & above Pairs Colour Natural or other colour on request Red and Black 18 Red, Yellow and Blue 1 2 3 4 5 6 7 8 1 2 4 5 6 8 1 2 8 FOUR PAIR FOUR CORE SINGLE CORE Red, Yellow, Blue and Black Black with white numbering (others on request) Note: Special construction and design to customers’ specification can be provided upon request. Black with white numbering
Applicable Standards IEC 60502-1 Extruded solid dielectric insulated power cables for rated voltage of 1 kV up to 30 kV IEC 60228/BS 6360 Conductors of insulated cables IEC 60754-1/BS 6425-1 Test on gases evolved during combustion of electric cables - Determination of the amount of halogen acid gases IEC 60754-2/BS 6425-2 Test on gases evolved during combustion of electric cables - Determination of degree of acidity of gases evolved by measuring PH and conductivity IEC 61034/BS 7622 Measurement of smoke density of electric cables burning under defined conditions BS 6724 Armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire BS 7211 Thermosetting insulated cables (non-armoured) for electric power and lighting with low emission of smoke and corrosive gases when affected by fire BS 7846 600/1000V armoured fire-resistant electric cables having low emission of smoke and corrosive gases when affected by fire 19
Page 1 and 2: Fire Performance Cables Draka Cable
Page 3 and 4: Company Profile Draka Holdings N.V.
Page 5 and 6: MAX-FOH 3
Page 7 and 8: Applicable Standards IEC 60502 AS 3
Page 9 and 10: IEC 60754 - Acid Gas Emission Test
Page 11 and 12: Three Cores Four Cores Nominal area
Page 13 and 14: Single pair Two pairs Three pairs F
Page 15 and 16: Selection of Cable based on Voltage
Page 17 and 18: LSF LOW SMOKE HALOGEN FREE CABLES 1
Page 19: CHARACTERISTICS OF LOW SMOKE HALOGE
Page 23 and 24: Three Cores Four Cores Nominal area
Page 25 and 26: One pair Two pair Three pair Four p
Page 27 and 28: TABLES FOR MAX-FOH & LSF CABLES 25
Page 29 and 30: Correction factors for groups of mo
Page 31 and 32: Cables in conduit and trunking, and
Page 33 and 34: Voltage drop table (Unarmoured Cabl
Page 35 and 36: Cables run in single way ducts Plai
Page 37 and 38: SHORT CIRCUIT RATINGS Another impor
Page 39 and 40: Project references: SCM has supplie

Fire Performance Cables - nr engineering co.,ltd.

Create successful ePaper yourself

Delete template?

Save as template?