Anton/Bauer Catalog 2012

Quad 2702 PowerCharger
1 - READY 6.1
DIONIC HC 100% 16.8V
1 - Ser # 13260 Mar 10 6.1
2 cycles 24˚C
lCd Readout
The PowerCharger series is equipped with an lCd readout capable
of displaying critical battery information, including temperature,
capacity, voltage, cycle count, serial number, and month/year of
manufacture
dual 2722 PowerCharger
PowerChargers®
QUAD 2702 PowerChA rger
The four position QUAD 2702 PowerCharger is the most advanced power
system available. This state of the art charger will sequentially fast charge any
combination of Anton/Bauer Logic Series Batteries using the advanced charging
techniques of the Anton/Bauer InterActive system in a package roughly
the size of a notebook computer. Charger firmware is contained on a single field
replaceable chip ensuring the QUAD’s future compatibility with new cell
technologies and charging methods. The QUAD 2702 is the ideal charger
ensuring our batteries’ legendary high performance with cutting edge test and
diagnostic hardware and software.
· 2 amp DDM ( Diagnostic Discharge Module )
· 4 Position Sequential Fast Charging
· Multi-function LCD readout
· 70 watt, 16VDC Power Supply output
· 100–240 VAC, 50/60 hz. wide range Input
· Field Upgradable Firmware for Future Compatibility
· recessed Carry handle for easy Transport
· Size: 3.00 x 12.50 x 8.25 in (7.60 x 31.70 x 20.90 cm)
· weight: 4.1 lbs (1.8 kg)
· MAXX V warranty
DUAL 2722 PowerChA rger
The DUAL 2722 PowerCharger puts all the performance and advanced charging
techniques of the QUAD 2702 PowerCharger into a compact two position
simultaneous fast charger. The DUAL 2722 can be switched to a 70w power
supply allowing you to charge one battery and simultaneously power a camera,
as well as other portable field equipment. The DUAL 2722 PowerCharger is ideal
for the traveling professional.
· 1 amp DDM (Diagnostic Discharge Module)
· 2 Position Simultaneous Fast Charging
· Multi-function LCD readout
· 70 watt, 16VDC Power Supply output
· 100–240VAC, 50/60hz. wide range Input
· Field Upgradable Firmware for Future Compatibility
· Size: 3.25 x 9.25 x 8.50 in (8.20 x 23.50 x 21.60 cm)
· weight: 2.9 lbs (1.3 kg)
· MAXX V warranty
XLr -4 PowerChA rger ACCe SSory CABLe
The XLr-4 Accessory Cable (10ft./3.04m) connects to any PowerCharger, TM4 or
T2 Charger to power equipment through the 4-pin XLr DC input. heavy duty wire
gauge cable and high quality connectors minimize losses.
All Anton/Bauer Chargers Meet US, Canadian, europe (Ce) and FCC Part 15
regulatory requirements