04.03.2013 Views

Anton/Bauer Catalog 2012

Anton/Bauer Catalog 2012

Anton/Bauer Catalog 2012

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

QR-EX1<br />

QR-EX3<br />

QR-SDH<br />

QR-A200<br />

14.4 Volt Gold Mount Adapters For Sony PMW-EX1/<br />

EX1R And PMW-EX3 Series<br />

gold Mount adapters Qr-eX3 and Qrp-eX1 supply native 14.4V to the<br />

camera and allow the use of an ultralight on-camera light through integral<br />

powertap connector.<br />

Q rp- e X1<br />

pouch style adapter for Sony pMW-eX1/eX1r. (use only with hytron 50 or<br />

dIonIc 90. all all other logic Series Batteries can be used without the pouch. )<br />

Q r - e X3<br />

on-camera gold Mount for Sony pMW-eX3 to work with dIonIc 90, dIonIc hc<br />

or hytron 50 batteries, extending camera run-time and improving balance. In<br />

addition, the Qr-eX3 comes standard with a powertap connector, which allows<br />

the powering of an ultralight, wireless receiver, or any other 14.4V accessory.<br />

the dIonIc 90 and dIonIc hc batteries provide up to 6.5 hours of run-time<br />

while the hytron 50 battery offers 3.5 hours.<br />

The PRODUCT APPLICATIOn GUIDE at the back of the catalog lists the most current cameras and<br />

monitors with the applicable Gold Mounts. Wireless receiver mounts and hard drive mounts are<br />

not included with the Gold Mount, and must be purchased separately.<br />

Sony Wedge Mount Adapter<br />

complete with original Sony parts, these adapters are designed to avoid<br />

movement and potential burnout when using high power consumption cameras.<br />

Special features include a rock solid, five point mechanical connection system<br />

and high current electrical connections for ultimate battery performance.<br />

anton/<strong>Bauer</strong> wedge mount adapters instantly convert the Sony “wedge”<br />

connector, providing compatibility with all logic Series Batteries. although<br />

some Sony cameras feature a built-in powertap connector near the handle,<br />

lighting is limited to either 25 or 50 watts at 12 volts (depending on model)<br />

due to a limiter in the camera. the anton/<strong>Bauer</strong> adapters allow the unrestricted<br />

use of on-camera lighting with the powertap connector, as well as access<br />

to the Interactive viewfinder Fuel gauge and automatique feature standard in<br />

most Sony cameras. comes with integrated wireless back plate.<br />

Q r -Sdh<br />

Mounts instantly to Xdcam hd (2/3”), Xdcam eX, SX, digital Betacam,<br />

hi-definition and IMX cameras to accept anton/<strong>Bauer</strong> batteries.<br />

Q r - d S r<br />

Mounts instantly to the Xdcam-Sd and hd (1/2”), dSr series and dVcam<br />

cameras, hVr-S270u and SrW-9000 to accept anton/<strong>Bauer</strong> batteries.<br />

Q r - a 200<br />

addresses any monitors or other portable equipment that have a Sony Wedge<br />

Mount adapter.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!