EVI 7 S9 - Amisco

EVI 7 S9 Solenoid System 

The EVI7 S9 system by AMISCO 

includes a wide range of 

solenoids, coils and operators, 

designed for pneumatic valves. 

All solenoids of this system have 

the guide tube with a diameter 

of 9 mm and the plunger with 

a diameter of 8 mm. 

The system is designed 

for use with air. 

Please contact Amisco for use with other 

media. All given information are 

subjected to changes without notice. 

COIL 

The coil is available in different sizes and with different electrical terminations. Types, power and other 

characteristics are described in the following pages. All coils feature: 

heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material 

class H wire 200°C according to IEC 60317-13 

built-in magnetic yoke made by low carbon iron 

encapsulation with high quality specially designed glass filled nylon (thermoset material on demand for 22 mm coil). 

The use of other materials is possible upon special agreements. All coils are rated to class F and to IP 65 (with connector). 

The coil is designed and constructed in accordance to EN 60204.1 and VDE 0580 and it is suitable for industrial ambient 

conditions. For use in special ambients with high humidity, we suggest the sealed or thermoset version; at any case, 

please, take contact with Amisco. 

The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex nA II 3 GD T4 or T5). 

OPERATOR 

Plunger and core are made by a magnetic stainless steel specially designed for solenoid applications. 

The guide tube is made with brass (stainless steel is possible upon special agreement). 

The plunger is normally equipped with NBR rubber seals. Other sealing materials like FKM are available upon demand. 

The armature assembly is designed for more than 10 6 cycles. 

COMPLETE SOLENOID OPERATOR 

The coil is fastened to the plungerguide tube by means of a 

knurled nut for ease of change over without interrupting the 

pneumatic circuit. 

The operator can be fixed to the valve body either by a M12x0.5 

thread (thread version), or by a mounting plate with screws 

(flange version). Amisco doesn't supply the plate. 

The suggested interface dimensions of the valve body are 

shown on the right side. 

Any change to the prescribed dimensions can effect the 

performances of the solenoid. 

1 

KNURLED NUT 

TOP CORE 

GUIDE TUBE 

PLUNGER 

MOUNTING PLATE 

THREAD VERSION FLANGE MOUNTING VERSION

SOLENOID SYSTEM 

for 2/2 and 3/2 way Normally Closed 

and Normally Open valves 

Coil EVI 7/9 

Electrical terminations 

Terminals AMP 6.3x0.8 width 11 mm 

Terminals AMP 6.3x0.8 width 11 mm Sealed version 

Terminals AMP 6.3x0.8 width 11 mm 

Sealed version Thermoset 

Flying leads 

Coil EVI 30/9 

Electrical termination 

Terminals DIN 43650 A 

Flying leads 

Operator S9 

3/2 way NC flange 

3/2 way NC Thread 


2/2 way NC Thread 

3/2 way NO flange (Top inlet) 

3/2 way NO Thread (Top inlet) 

3/2 way NO Thread (Bottom inlet) 

Note: 

Voltage tolerance: ± 10% 

Temperature range: –20°C ÷ +50°C 

Duty cycle: 100% 

Code 

0709S… 

0709F… 

0709E… 

0709C… 

Code 

3009D… 

3009C… 

Code 

09L... 

09F... 

09L... 

09F... 

09L... 

09F... 

09F... 

For different orifice sizes and pressures contact AMISCO S.p.A. 

Characteristics 

Rated power DC W 

Inrush power AC VA 

Rated power AC VA 

Coil temperature rise °C 

Copper temperature rise °C 








Inlet orifice Ø mm 

Exhaust orifice Ø mm 

Working pressure bar 







Standard voltages: 24 - 110 - 230 VAC 

Other voltages on request 

12 - 24 VDC 

3 

35 

40 

2 

20 

25 

1,2 

1,45 

0÷10 

1,2 

0÷10 

1,45 

0÷7 

1,2 

0÷10 

DC AC (50 Hz) AC (60 Hz) 

4,2 

45 

50 

1,4 

1,45 

0÷10 

1,4 

0÷10 

1,45 

0÷7 

6,5 

70 

80 

1,5 

1,45 

0÷10 

1,5 

0÷10 

1,45 

0÷10 

7,5 

5 

45 

55 

1,2 

1,45 

0÷10 

1,2 

0÷10 

1,45 

0÷7 

1,2 

0÷10 

12,5 

8,5 

85 

95 

1,5 

1,45 

0÷10 

1,5 

0÷10 

1,45 

0÷10 

6,5 

4,2 

35 

45 

1,2 

1,45 

0÷10 

1,2 

0÷10 

1,45 

0÷7 

1,2 

0÷10 

10,5 

7 

70 

80 


4,5 

35 

50 

5,5 

3 

20 

25 

9 

5 

35 

45 

4,5 

2,5 

15 

20 

7,5 

4,2 

30 

35 

1,5 

1,45 

0÷10 

1,5 

0÷10 

1,45 

0÷10 

2

EVI 7/9 AMP 6,3x0,8 

(M3 Max Torque 0.6Nm) 

EVI 7/9 AMP 6,3x0,8 Sealed and Thermoset Version 


EVI 7/9 Flying Leads 

3 

CODE 0709S... 

CODE 0709F... 

CODE 0709E... 

CODE 0709C...

EVI 30/9 DIN 43650 A 


EVI 30/9 Flying Leads 

3009M Ex m 

CODE 3009D... 

CODE 3009C... 

CODE 3009M... 

4

3009 Ex m 94/9/EC ATEX 

AMISCO has completed the EVI7 S9 

Solenoid System with a special coil for 

pneumatic applications in potentially 

explosive ambient (group II), that fullfills 

the requirements of EN 60079-0, 

EN60079-18, EN 61241-0, EN 61241-18, 

for protection mode “m”. 

The type 3009M Ex m coil is supplied with different lenght of 

cable up to 10 m. 

The coil is certified by CESI in thermal class T5 (with coil 

surface temperature max 100°C) or T4 (with coil surface 

temperature max 135°C). 

Ec-Type Examination Certificate number: CESI 02 ATEX 142 X 

and extension N° 02/07. 

Notification number: CESI 03 ATEX 075 Q. 

The protection is assured by a thermal fuse that, in case of 

demage, disconnects the coil from power. 

29.5 30 

5 

II 

2 

G 

D 

Ex 

mb 

mbD 

T5 or T4 

T95 or T130 

IP66 

Zone Category Description 

1 

21 

65.5 

2G 

2D 

12 

The product is developed to be used in ambients with 

temperature range from –15°C to +50°C, and it has a power 

consumption of 3.8W for type T4 and 3W for type T5. 

The coil fits all Amisco standard operators 3/2 or 2/2 way NC 

or NO, threaded or flange types. 

All main voltages are available. 

For other technical specifications see below and next pages. 

Specific marking of explosion protection 

Group II - Electrical apparatus for places with a potentially 

explosive atmosphere, other than mines susceptible to fire damp. 

Category 2 - see the board below. 

Explosive gas atmospheres. 

Explosive atmospheres in the presence of combustible dusts. 

The symbol Ex which indicates that the electrical apparatus 

corresponds to one of the protection type (EN 60079 – 0). 

Type of protection for gas – encapsulation m, level mb. 

Type of protection for dust (D) – encapsulation m, level mbD. 

Temperature class for gas. 

Maximum surface temperature for dust. 

The degrees of protection provided by an enclosure against, 

ingress of solid foreign objects, dust (first number) 

and water (second number). 

Equipment in this category is intended for use in areas where explosive atmospheres caused by air/gas mixture are likely to occur. 

Equipment in this category is intended for use in areas where explosive atmospheres caused by air/dust mixture are likely to occur.

SOLENOID SYSTEM Ex m 

for 2/2 and 3/2 way Normally Closed 

and Normally Open valves 

Coil 3009 M Code 


Ex mb T5 

Ex mbD T95 

Ex mb T4 

Ex mbD T130 

Operator S9 


3/2 way NC thread 


2/2 way NC thread 

3/2 way NO flange (Top Inlet) 

3/2 way NO thread (Top Inlet) 

Note: 

Voltage tolerance: ± 10% 

Temperature range: –15°C ÷ +50°C 

Duty cycle: 100% 

Performances 

3 W Coil - DC 

P 

12 bar 

10 

8 

6 

4 

2 

3009M…W. 

3009M…W. 

09L... 

09F... 

09L... 

09F... 

09L... 

09F... 












Exhaust orifice Ø mm 






Standard voltages: 12 to 240 VAC - 50/60 Hz 

6 to 48 VDC 

For different orifice sizes and pressures contact AMISCO S.p.A. 

3,2 VA Coil - AC 

3,8 W Coil - DC 

Above-mentioned characteristics have to be intended only as indicative. They may change according to the tube design solutions. 

3 

35 

40 


Orifice 0 0,5 1 1,5 2 2,5 mm 

Orifice 0 0,5 1 1,5 2 2,5 mm 

P 

1,2 

1,45 

0-10 

1,2 

0-10 

1,45 

0-7 

12 bar 

10 

8 

6 

4 

2 

3,8 

50 

55 

1,5 

1,45 

0-10 

1,5 

0-10 

1,45 

0-10 

4,8 

3,2 

15 

30 

1,5 

14,5 

0-10 

1,5 

0-10 

1,45 

0-10 

4 

2,7 

10 

25 

1,5 

1,45 

0-10 

1,5 

0-10 

1,45 

0-10 

6

COIL CODING SPECIFICATIONS 

7 

TYPE 

07 = EVI 7 


COIL BORING 

09 = 9 mm 

ELECTRICAL CONNECTION 

for EVI 7 

S = AMP 6.3x0.8 

E = AMP 6.3x0.8 Epoxy Sealed Version 

F = AMP 6.3x0.8 Sealed Version 

C = Flying Leads 

CODE: X X 9 9 Y K 5 5 5 4 4 * * 

for EVI 30 

D = DIN 43650 A 

C = Flying Leads 

SUPPLY CURRENT 

A = Alternating current (A.C.) 

D = Direct current (D.C.) 

R = Rectified alternating current (R.A.C.) 

NOMINAL VOLTAGE 

Example: 024 = 24V 

220 = 220 V 

EVI 7 S9 WINDING CODE EVI 30 S9 WINDING CODE 

Nominal Voltage Power Winding Code Nominal Voltage Power Winding Code 

12VDC 3W 03 

4,2W 06 

6,5W 04 

24VDC 3W 03 

4,2W 06 

6,5W 04 

24VAC 5VA 01 

8,5VA 02 

110VAC 5VA 01 

8,5VA 02 

230VAC 5VA 03 

8,5VA 01 

Alternative possibilities for 

CUSTOMER LOGO 

12VDC 2W 01 

4,5W 05 

24VDC 2W 01 

4,5W 06 

24VAC 3VA 08 

5VA 02 

110VAC 3VA 07 

5VA 02 

230VAC 3VA 04 

5VA 01 

MARKING 

ZN = Standard - no logo 

AM = Standard + Amisco logo 

... = Customized marking

COIL 3009M Ex m CODING SPECIFICATIONS 

TYPE 


COIL BORING 

09 = 9 mm 

CODE: X X 9 9 Y K 5 5 5 4 4 * * 

TYPE OF PROTECTION 

M = Encapsulation 

SUPPLY CURRENT 

A = Alternating current (A.C.) 

D = Direct current (D.C.) 

NOMINAL VOLTAGE 

Example: 024 = 24V 

220 = 220 V 

TEMPERATURE CLASS 

W2 = T5 class for AC 

W3 = T5 class for DC 

W4 = T4 class for DC 

WIRE LENGHT 

01 = 1,2 m 

03 = 3 m 

05 = 5 m 

10 = 10 m 

8

EXAMPLES OF MAIN APPLICATIONS 

3/2 NC 

2/2 NC 

3/2 NO (Top Inlet) 

3/2 NO (Bottom Inlet) 

9 

3/2 NC & 3/2 NO (Top Inlet) Operator 

2/2 NC Operator 

3/2 NO (Bottom Inlet) Operator

COIL CODING SPECIFICATIONS 

Type 

FLANGE 

THREAD 

FASTENING NUTS (Note: tightening torque max 0.6 Nm) 

Plastic knurled nut 

Plastic knurled nut for 

protected exhaust 

Aluminium knurled nut 

Weavy washer 

Ø 8 DIN 137 type A 

Function 

3/2 NC 

2/2 NC 

3/2 NO 

(Top Inlet) 

3/2 NC 

2/2 NC 

3/2 NO 

(Top Inlet) 

3/2 NO 

(Bottom Inlet) 

Inlet orifice Ø 

1,2 mm 

1,4 mm 

1,5 mm 

1,2 mm 

1,4 mm 

1,5 mm 

1,45 mm 

1,2 mm 

1,4 mm 

1,5 mm 

1,2 mm 

1,4 mm 

1,5 mm 

1,45 mm 

1,2 mm 

Cod. 540238 

Cod. 540270 

Cod. 540201 

Cod. 535019 

Seals 

Operator Code 

NBR 09L02401A3CNN 

FKM 09L02401A3CVN 











NBR 09L02403A3ONN 

FKM 09L02403A3OVN 

NBR 09F07350A3CNN 

FKM 09F07350A3CVN 











NBR 09F07401A3ONN 

FKM 09F07403A3OVN 

NBR 09F11100A3ONN 

FKM 09F11101A3OVN 

10

www.amisco.it 

AMISCO S.p.A. 

Via Piaggio, 70 

20037 Paderno Dugnano (Mi) 

Italy 

Tel. +39 02.99.00.181 

Fax +39 02.99.00.18.60 

amisco@amisco.it 

Rev. 1/2011

EVI 7 S9 - Amisco

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?