22 mm PILOT VALVE - Amisco
22 mm PILOT VALVE - Amisco
22 mm PILOT VALVE - Amisco
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>22</strong><strong>mm</strong> 30<strong>mm</strong> Pneumatic Pilot Valve SystemIn order to meet the growing demand of thepneumatic industrial automation, AMISCO offers acomplete range of pneumatic solenoid pilot valveswith <strong>22</strong> <strong>mm</strong> and 30 <strong>mm</strong> width as a logical evolutionof the traditional range of coils and solenoidoperators, heart of any solenoid valve.This pilot valve system is designed for thoseapplications where high performance, highreliability and long life are specified.All the solenoid valves of this system are designedfor use with compressed air and consist of anencapsuled coil assembled on a valve with brasstube plastic and body.Please contact <strong>Amisco</strong> for use with other media.All given information are subjected to changes without notice.All the <strong>22</strong><strong>mm</strong> pilot valves feature:Coil:• heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material• class H wire 200°C according to IEC 60317-13• built-in magnetic yoke made by low carbon iron• encapsulation with high quality specially designed glass filled polyamide (PA 6.6)Valve:• brass guiding tube• plunger and core made by a magnetic stainless steel specially designed for solenoid applications• polyester valve bodyThe pilot valve is designed for more than 50x10 6 cycles.The valve is normally equipped with NBR seals and bistable manual override, and it can be delivered withscrews for its assembling on the main valve units.The coil is designed and manufactured according to EN 60204.1 and VDE 0580 and it's suitable forindustrial ambient conditions.For use in different ambient with high humidity, take contact with <strong>Amisco</strong>.All the components used are UL-LISTED.The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3.See the “EVI 7 S9 Solenoid System” for more information.Different electrical connections are available.More technical specifications are reported in the following pages.1
COIL CODING SPECIFICATIONSCODE: X X X T Y K V 5 5 4 4 * *TYPE<strong>22</strong>E = <strong>22</strong><strong>mm</strong> EE Pilot Valve<strong>22</strong>I = <strong>22</strong><strong>mm</strong> IE Pilot Valve30C = 30<strong>mm</strong> Pilot Valve CNOMOTUBE DIAMETER9 = Ø 9<strong>mm</strong>TUBE MATERIALI = Stainless SteelO = Brass<strong>VALVE</strong> FUNCTION2 = 2 Way valve3 = 3 Way valve<strong>VALVE</strong> CONDITIONC = Normally ClosedO = Normally OpenORIFICE DIAMETER12 = Ø 1.2 <strong>mm</strong>14 = Ø 1.4 <strong>mm</strong>15 = Ø 1.5 <strong>mm</strong>16 = Ø 1.6 <strong>mm</strong>18 = Ø 1.8 <strong>mm</strong>SEAL MATERIALSN = NBRV = FKM(other material on request)MANUAL OVERRIDEM = Monostable (no lock) BrassB = Bistable (turn and lock) BrassP = Bistable (turn and lock) PlasticO = No overrideMARKINGZN = Standard - No logoAM = Standard + <strong>Amisco</strong> Logo... = Customized markingalternative possibilities forCUSTOMER LOGO<strong>22</strong> <strong>mm</strong> and 30 <strong>mm</strong> PNEUMATIC <strong>PILOT</strong> <strong>VALVE</strong>STANDARD AMISCO LOGO POSITION2
<strong>22</strong> <strong>mm</strong> <strong>PILOT</strong> <strong>VALVE</strong> EESolenoidValveAssembly3/2 NC2/2 NC3
<strong>22</strong> <strong>mm</strong> <strong>PILOT</strong> <strong>VALVE</strong> EETECHNICAL SPECIFICATIONSFunctionOrifice<strong>mm</strong>(Port 1)Flow rateNL/min (Port 1—>2)6 bar Δp 1 barKvfactorMINPressurebarMAXCoil PowerWDCVAAC3/2 NC1,2500,76010353/2 NC1,5650,990106,58,52/2 NC1,2500,76010352/2 NC1,5650,990106,58,5<strong>PILOT</strong> <strong>VALVE</strong> TECHNICAL DATAValve functionMediaLubricationOrifice sizePressureResponse timeLife time expectancyManual overrideMountingFixingMaterialCOIL TECHNICAL DATADuty cycleTemperaturePowerVoltagesVoltage variationInsulation classDegrees of protectionElectrical connectionCoil constructionMaterial3/2 NC - 2/2 NCairnot necessary1,2 - 1,5 <strong>mm</strong>0 ÷ 10 bar8 ÷ 15 ms50 milion cyclesmonostable - bistable - no overridein any positionn° 2 screws M3 x 20valve body glass reinforced PolyestersealsNBR - FKM (other materials on request)coresstainless steelcore tube brass - stainless steelspringsstainless steel(The coil has to be ordered separately)ED 100%ambient -20°C to + 50°Cfluid -20°C to + 30°C3 to 6,5 W (DC) 5 to 8,5 VA (AC)12-24V DC 24-110-115-<strong>22</strong>0-230V AC (other voltages on request)± 10%FIP 65 (according to EN 60529) with connector assembled with suitable sealsee “EVI 7 S9” catalogue for more informationaccording to EN 60204.1 and VDE 0580coil glass reinforced Polyamide PA 6.6copper wire class H 200°C IEC 60317-134
<strong>22</strong> <strong>mm</strong> <strong>PILOT</strong> <strong>VALVE</strong> IESolenoidValveAssembly3/2 NC3/2 NO5
<strong>22</strong> <strong>mm</strong> <strong>PILOT</strong> <strong>VALVE</strong> IETECHNICAL SPECIFICATIONSFunctionOrifice<strong>mm</strong>(Port 1)Flow rateNL/min (Port 1—>2)6 bar Δp 1 barKvfactorMINPressurebarMAXCoil PowerWDCVAAC3/2 NC1,2500,76010463/2 NC1,6650,982106,58,53/2 NC1,8701,05286,58,53/2 NO1,6600,90076,58,53/2 NO1,8650,98066,58,5<strong>PILOT</strong> <strong>VALVE</strong> TECHNICAL DATAValve functionMediaLubricationOrifice sizePressureResponse timeLife time expectancyManual overrideMountingFixingMaterialCOIL TECHNICAL DATADuty cycleTemperaturePowerVoltagesVoltage variationInsulation classDegrees of protectionElectrical connectionCoil constructionMaterial3/2 NC - 3/2 NOairnot necessary1,6 - 1,8 <strong>mm</strong>0 ÷ 10 bar8 ÷ 15 ms50 milion cyclesbistable - no overridein any positionn° 2 screws M3 x 20valve body glass reinforced PolyestersealsNBR - FKM (other materials on request)coresstainless steelcore tube brass - stainless steelspringsstainless steel(The coil has to be ordered separately)ED 100%ambient -20°C to + 50°Cfluid -20°C to + 30°C4 to 6,5 W (DC) 6 to 8,5 VA (AC)12-24V DC 24-110 -115-<strong>22</strong>0-230V AC (other voltages on request)± 10%FIP 65 (according to EN 60529) with connector assembled with suitable sealsee “EVI 7 S9” catalogue for more informationaccording to EN 60204.1 and VDE 0580coil glass reinforced Polyamide PA 6.6copper wire class H 200°C IEC 60317-136
30 <strong>mm</strong> <strong>PILOT</strong> <strong>VALVE</strong> - CNOMO3/2 NCNo manual override Monostable BistableM8M5Ø6.9PORT 3(R)2(A)56.35<strong>22</strong> 34.35Ø9.04 MaxPORT 2(A)1(P) 3(R)PORT 1(P)2/2 NCM82(A)Ø9.04 Max56.35<strong>22</strong> 34.35PORT 2(A)1(P)PORT 1(P)Interfacedimensions04.503R47.5= =<strong>22</strong>8031010.5 10.52104.528SCREW SUGGESTED M4x30 (x2) min7
30 <strong>mm</strong> <strong>PILOT</strong> <strong>VALVE</strong> - CNOMOTECHNICAL SPECIFICATIONSFunctionOrifice<strong>mm</strong>(Port 1)Flow rateNL/min (Port 1—>2)6 bar Δp 1 barKvfactorMINPressurebarMAXCoil PowerWDCVAAC3/2 NC1,2500,76010232/2 NC1,2500,7601023<strong>PILOT</strong> <strong>VALVE</strong> TECHNICAL DATAValve functionMediaLubricationOrifice sizePressureResponse timeLife time expectancyManual overrideMountingFixingMaterial3/2 NC - 2/2 NCairnot necessary1,2 <strong>mm</strong>0 ÷ 10 bar8 ÷ 15 ms50 milion cyclesmonostable - bistable - no overridein any positionn° 2 screws M4 x 30 (not supplied by <strong>Amisco</strong>)valve body PPSsealsFKM - NBRcoresstainless steelcore tube brass - stainless steelspringsstainless steelCOIL TECHNICAL DATADuty cycleTemperaturePowerVoltagesVoltage variationInsulation classDegrees of protectionElectrical connectionCoil constructionMaterial(The coil has to be ordered separately)ED 100%ambient -20°C to + 50°Cfluid -20°C to + 30°C2 W (DC) 3 VA (AC)12-24V DC 24-110-115-<strong>22</strong>0-230V AC (other voltages on request)± 10%FIP 65 (according to EN 60529) with connector assembled with suitable sealDIN 43650 A - flying leadsaccording to EN 60204.1 and VDE 0580coil glass reinforced Polyamide PA 6.6copper wire class H 200°C IEC 60317-138
<strong>22</strong><strong>mm</strong> - 30<strong>mm</strong> <strong>PILOT</strong> <strong>VALVE</strong>STANDARD CODING SPECIFICATION(The coil has to be ordered separately)9Valve Type Function Inlet orifice ø SealsManual OverrideValve Code<strong>22</strong><strong>mm</strong> EE<strong>22</strong><strong>mm</strong> IE30<strong>mm</strong> CNOMO3/2 NC2/2 NC3/2 NC3/2 NO3/2 NC2/2 NC1,21,51,21,51,21,61,81,61,81,21,2NBRFKMNBRFKMNBRFKMNBRFKMNBRFKMNBRFKMNBRFKMNBRFKMNBRFKMNBRFKMNBRFKMSpecial version are aviable under request. Please contact our technical departmentMonostableBistableNo OverrideMonostableBistableNo OverrideMonostableBistableNo OverrideMonostableBistableNo OverrideMonostableBistableNo OverrideMonostableBistableNo OverrideMonostableBistableNo OverrideMonostableBistableNo OverrideBistableNo OverrideBistableNo OverrideBistableNo OverrideBistableNo OverrideBistableNo OverrideBistableNo OverrideBistableNo OverrideBistableNo OverrideBistableNo OverrideBistableNo OverrideMonostableBistableNo OverrideMonostableBistableNo OverrideMonostableBistableNo OverrideMonostableBistableNo Override<strong>22</strong>E9O3C12NMAM<strong>22</strong>E9O3C12NPAM<strong>22</strong>E9O3C12NOAM<strong>22</strong>E9O3C12VMAM<strong>22</strong>E9O3C12VPAM<strong>22</strong>E9O3C12VOAM<strong>22</strong>E9O3C15NMAM<strong>22</strong>E9O3C15NPAM<strong>22</strong>E9O3C15NOAM<strong>22</strong>E9O3C15VMAM<strong>22</strong>E9O3C15VPAM<strong>22</strong>E9O3C15VOAM<strong>22</strong>E9O2C12NMAM<strong>22</strong>E9O2C12NPAM<strong>22</strong>E9O2C12NOAM<strong>22</strong>E9O2C12VMAM<strong>22</strong>E9O2C12VPAM<strong>22</strong>E9O2C12VOAM<strong>22</strong>E9O2C15NMAM<strong>22</strong>E9O2C15NPAM<strong>22</strong>E9O2C15NOAM<strong>22</strong>E9O2C15VMAM<strong>22</strong>E9O2C15VPAM<strong>22</strong>E9O2C15VOAM<strong>22</strong>I9O3C12NPAM<strong>22</strong>I9O3C12NOAM<strong>22</strong>I9O3C12VPAM<strong>22</strong>I9O3C12VOAM<strong>22</strong>I9O3C16NPAM<strong>22</strong>I9O3C16NOAM<strong>22</strong>I9O3C16VPAM<strong>22</strong>I9O3C16VOAM<strong>22</strong>I9O3C18NPAM<strong>22</strong>I9O3C18NOAM<strong>22</strong>I9O3C18VPAM<strong>22</strong>I9O3C18VOAM<strong>22</strong>I9O3O16NPAM<strong>22</strong>I9O3O16NOAM<strong>22</strong>I9O3O16VPAM<strong>22</strong>I9O3O16VOAM<strong>22</strong>I9O3O18NPAM<strong>22</strong>I9O3O18NOAM<strong>22</strong>I9O3O18VPAM<strong>22</strong>I9O3O18VOAM30C9O3C12NMAM30C9O3C12NBAM30C9O3C12NOAM30C9O3C12VMAM30C9O3C12VBAM30C9O3C12VOAM30C9O2C12NMAM30C9O2C12NBAM30C9O2C12NOAM30C9O2C12VMAM30C9O2C12VBAM30C9O2C12VOAM
ASSEMBLING EQUIPMENTTYPE EETYPE IE2The coil has to be ordered separately.30 <strong>mm</strong> - CNOMOSCREWS NOT SUPPLIED(M4x30 - SUGGESTED DIMENSION)The coil has to be ordered separately.FASTENING NUTS (Note: tightening torque max 0.6 Nm)Plastic knurled nutCod. 540238Plastic knurled nut forprotected exhaustCod. 540270Aluminium knurled nutWeavy washerØ 8 DIN 137 type ACod. 540201Cod. 53501910
www.amisco.itAMISCO S.p.A.Via Piaggio, 7020037 Paderno Dugnano (Mi)ItalyTel. +39 02.99.00.181Fax +39 02.99.00.18.60amisco@amisco.itRev. 3/2013
Change language