CAP 910 - Kathrein
CAP 910 - Kathrein
CAP 910 - Kathrein
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
24<br />
INSTALLATION AND CONNECTION<br />
Only for connection in a motor home, not in a caravan!<br />
• The third, green connecting cable, marked “IGNITION” allows you the option of connection to a<br />
circuit in the vehicle that is activated when the ignition key is turned and then carries a continuous<br />
12 V supply. This type of connection ensures that when the engine is started the antenna<br />
is automatically lowered into the park position (the receiver does not need to be turned on).<br />
Note that the antenna can then be lowered only when the power supply is present in addition to<br />
the ignition signal!<br />
• Check the connections before you re-connect the on-board power supply.<br />
• For commissioning and more detailed information on additional operator functions, please consult the<br />
operation section of the separate operating manual for the receiver.<br />
FUNCTIONAL INSTRUCTIONS FOR CONNECTION TO THE ON-BOARD POWER SUPPLY<br />
Under certain circumstances, problems can arise when the units are connected to different connecting<br />
sockets or circuits/earth potentials. If none are available, it is recommended that you connect the<br />
connecting sockets for receiver and TV set to the same cable, as depicted in Figure “G”. The power<br />
rating of the circuit used must be checked with respect to the intended application.<br />
Further information on operating the UFS 940sw receiver can be found in the operating manual<br />
supplied with the unit.
Change language