Chiligreen MR3 Firmware Update - English - Treiberdownload ...

3 Chiligreen MR3 Firmware Update - English
Change in the directory where you have depacked the Files.
In this Directory there should be this Files and a CRC.txt File.
Copy the Files and the CRC.txt to the root Directory of your USB Stick.
Updating the Firmware
Disconnect the MR3 from the Power Supply Unit
Connect the MR3 over AV-Out with a TV-System and chose the right Channel on the
TV-System
Connect your USB-Stick on the USB-Host USB on the side of the MR3
(these you will find on the right Side of the MR3)
Press and hold the Standby Button on the front Side of the MR3.
(the Standby Button)
Connect your MR3 with the Power-Supply-Unit. (Hold on the Standby Button)
Wait for 3 seconds, than release the Standby Button.
Wait for 30 Sekonds, in this Time the Firmware Update has to start. While he is installing the new
Firmware the 3 Leds at the front of the MR3 will flash. When you have connected the MR3 over the
AV-Out with your TV-System you should see this screen.
(this screen is showing while he updates the firmware).
Please wait till the installation is completed. The installation is completed the LEDs stops flashing and
the screen shows : “Sucessfully updated”.
Press the Standby-Button to restart the MR3
Problems during the Firmware Installation