Knee Type Milling Machines - Manfred Fedler jun. MF ...
Knee Type Milling Machines - Manfred Fedler jun. MF ...
Knee Type Milling Machines - Manfred Fedler jun. MF ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Power operated feed and rapid<br />
traverse in longitudinal, cross and<br />
vertical directions for Size 2 & 3.5<br />
models.<br />
Differential thread<br />
clamping system for knee<br />
ensures higher clamping<br />
force.<br />
Large tray on the base<br />
plate to collect chip and<br />
coolant<br />
Universal <strong>Milling</strong> Machine UF2<br />
„<br />
Motorised Over Arm (MOA)<br />
An added advantage of vertical spindle on horizontal and universal<br />
machines on size 2 and size 3.5 models.<br />
MOA is supplied with a vertical milling head. A manual quill stroke<br />
of 70 mm is available on milling head. MOA comes with<br />
independent drive motor of 3kW (4HP) power. Spindle is provided<br />
with 12 speeds in the range 45 - 2000 rpm and ISO 40 taper.<br />
Since MOA itself is used as over arm for mounting arbor support<br />
bracket, the machine doesn’t require normal over arm.<br />
Horizontal <strong>Milling</strong> Machine HF 3.5<br />
Rigid over-arm makes overarm<br />
brace superfluous<br />
Lubrication<br />
Central lubrication for guide ways and<br />
leadscrews. Splash lubrication for speed and feed<br />
gearing.<br />
Coolant<br />
An electric pump mounted at the rear of the<br />
machine base ensures copious flow of coolant<br />
to the work zone. The coolant is discharged in to<br />
the built - in coolant tank in the machine base.<br />
Chip collection and<br />
coolant diversion with<br />
large tray below the table<br />
Built-in coolant tank<br />
in machine base
Change language