Catalogue 2012/2013 - Putzmeister Mörtelmaschinen GmbH

Accessories for processing site-made mixes
Entire set, part no.: 532 996
≈ 40 m long, consisting of:
Part Part no. Fig.
2x Mortar hose, ID 50, V 50, M 50, 13.3 m 501 914 1
1x Mortar hose, ID 35, V 50, M 35, 13.3 m 207 616.006 2
1x Geka air hose, 1/2", 40 m 214 734.007 3
5x Seal ID 35 213 725.004 4
5x Sponge ball ID 35 065 044.001 5
5x Seal ID 50 213 266.000 6
Accessories for injection and pressure grouting
Entire set, part no.: 532 998
≈ 40 m long, consisting of:
Part Part no. Fig.
3x Mortar hose, ID 50, V 50, M 50, 13.3 m 501 914 1
5x Seal ID 50 213 266.000 2
5x Sponge ball ID 50 000 212.005 3
1x Geka air hose, 1/2", 40 m 214 734.007 4
3x Hose holder, leather 000 206.008
8
2
4
4
35
5
2
1
3
5 7
6
3
1 2
4
Mortar and plaster
Part Part no. Fig.
5x Sponge ball ID 50 000 212.005 7
1x Base coat plaster spray
gun, short, V 35
001 306.004 8
3x Hose holder, leather 000 206.008
Part Part no. Fig.
1x Injection nozzle with
T-piece, pressure gauge,
remote control air cock,
coupling with spout
ID 50, expanding collar
D 45, and collar D 38
001 128.004 5