Outdoor Lighting - THORN Lighting
Outdoor Lighting - THORN Lighting
Outdoor Lighting - THORN Lighting
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
16<br />
<strong>Outdoor</strong> <strong>Lighting</strong><br />
<strong>Lighting</strong> people and places<br />
www.thornlighting.com.au
www.thornlight.com.au<br />
Mt Barker, SA<br />
Architectural Surface<br />
Mounted Floodlighting<br />
Thorn offers many different types<br />
of Architectural Surface Mounted<br />
Floodlights. Use this pictorial summary<br />
to help find what you need<br />
Contrast LED<br />
18<br />
QBA LED<br />
28<br />
Milo R/I<br />
36<br />
Contrast C<br />
20<br />
QBA<br />
30<br />
Intensive LED<br />
38<br />
Contrast R<br />
22<br />
D-CO LED Flood<br />
32<br />
Corniche<br />
39<br />
Contrast Mini Pinspot<br />
/Contrast Pinspot<br />
24<br />
OQ 1000/OSQ<br />
33<br />
Contrast Attachments<br />
26<br />
Cesar<br />
34<br />
<strong>Lighting</strong> people and places<br />
17<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
18<br />
Contrast LED<br />
A high performance LED<br />
floodlight that is ideal for use<br />
on architectural features and<br />
decorative areas. It produces<br />
exciting lighting and coloured<br />
effects without wasteful spillage<br />
onto surrounding details<br />
388<br />
<strong>Lighting</strong> people and places<br />
285<br />
200<br />
Ø12 Ø18 Ø12<br />
40 40<br />
265<br />
123<br />
92<br />
126<br />
LED<br />
• Intensive LED technology for<br />
efficient light beam (+/-4°)<br />
• 54 LEDs for monochromatic<br />
version<br />
• 36 LEDs for RGB versions<br />
• A unique breather that allows<br />
the floodlight to breathe with<br />
changing environmental<br />
conditions, eliminating<br />
condensation and ensuring an<br />
IP65 seal<br />
• Distinctly styled, ultra-modern<br />
design with heat dissipation<br />
fins to maximise heat transfer<br />
and to ensure the life time of<br />
the LEDs<br />
• Pre-wired floodlight for easy<br />
installation<br />
Materials/Finish<br />
Body and frame: die-cast<br />
aluminium, textured grey powder<br />
coated finish.<br />
Screws: stainless steel.<br />
Front glass: 4mm toughened<br />
glass.<br />
Cable: 1.5m long rubber<br />
H07RN-F 2x1mm 2 for<br />
monochromatic versions.<br />
Profilplast CSA type 4x1mm 2 R<br />
for the RGB version.<br />
Connection box: grey ABS/PC<br />
(Polycarbonate) RAL 7043.<br />
Gasket: silicon.<br />
Cable gland: brass.<br />
Retained screws: stainless steel.<br />
Control system: DMX for RGB<br />
version.<br />
Accessories: die-cast aluminium<br />
(LM 6) with textured grey<br />
powder coated finish.<br />
Retaining screws: nickel plate<br />
brass.<br />
Front glass: toughened glass.<br />
LEDs 51.6 - 86.6W<br />
AS/NZS60598 Class II Electrical<br />
IK08 IP65<br />
Installation/Mounting<br />
Contrast LED is delivered<br />
complete with body and<br />
connection box including<br />
the power supply for the<br />
monochromatic versions or the<br />
power supply/DMX system for<br />
the RGB version.<br />
As the floodlight is pre-wired,<br />
the body must not be opened in<br />
order to preserve the electronic<br />
components. The distance<br />
between the power supply and<br />
the floodlight body is 60m<br />
maximum for the monochromatic<br />
versions and 50m for the RGB<br />
version.<br />
The floodlight is adjustable on<br />
a short, narrow stirrup which is<br />
fixed to mount by a central bolt<br />
hole 18mm diameter, and two<br />
12mm diameter holes at 80mm<br />
either sides of centre. Aiming is<br />
simplified by an indicator and<br />
mark on stirrup, and locked via<br />
a central 8mm diameter Allen<br />
screw.<br />
Plastic connection box must<br />
be opened for connections.<br />
Six retaining screws. Connect<br />
the Contrast floodlight to the<br />
connector in the gear box.<br />
Through wiring is supported.<br />
To connect the RGB version a<br />
DMX cable (not supplied) is<br />
required if dynamic scenario<br />
lighting effects are required.<br />
Connect the data+, data- and<br />
ground to the DMX connector.<br />
Specification<br />
To specify state:<br />
Shallow round LED floodlight for<br />
off set illumination on surface.<br />
Die-cast aluminium body and<br />
frame sealed IP65. With a<br />
choice of 5 monochromatic<br />
colours (2 whites, Red, Blue<br />
and Green) (Amber on request)<br />
and dynamic RGB employing<br />
LED light sources, with remote<br />
connection box with power<br />
supply for monochromatic<br />
versions and power supply/DMX<br />
system for RGB version.<br />
Other DMX components ordered<br />
separately.<br />
As Contrast LED.<br />
www.thornlighting.com.au
Ordering Guide One code includes the Contrast LED with its<br />
connection box including power supply for the monochromatic<br />
versions and power supply + DMX system for the RGB version.<br />
Description<br />
Monochromatic versions<br />
Ilcos Code Socket<br />
CONTRAST LED 86.6W 240V 54LED WHI/6000K 6.3 96254292<br />
CONTRAST LED 86.6W 240V 54LED WHI/3000K 6.3 96254293<br />
CONTRAST LED 86.6W 240V 54LED BLU 6.3 96254294<br />
CONTRAST LED 60W 240V 54LED RED 6.3 96254267<br />
CONTRAST LED 86.6W 240V 54LED GRN<br />
RGB Version<br />
6.3 96254268<br />
CONTRAST LED 51.6W 240V 36LED RGB DMX 7.0 96254269<br />
Accessories Ordering Guide A wide selection of attachments<br />
can be fixed on the Contrast LED front. The accessories can be<br />
superimposed and used with prismatic glasses or refractors to offer<br />
a variety number of light effects. All adjustments can easily be made<br />
on site.<br />
Description Wt<br />
(kg)<br />
SAP Code<br />
CONT R0 GL/FR S/S SINT (OMS) Semi-intensive symmetrical 1.0 96002503<br />
CONT R0 GL A/S SINT (OMP) Semi-extensive asymmetrical 1.0 96002504<br />
CONT R0 GL A/S EXT (OMW) Extensive asymmetrical 1.0 96002505<br />
CONT R0 GL S/S XEXT (OME) Super extensive symmetrical 1.0 96002506<br />
CONT R0 LR1 Medium wide refractor 1.0 96002500<br />
CONT R0 LR2 Wide refractor 1.0 96002501<br />
CONT R0 LR3 Narrow refractor 1.0 96002502<br />
CONTRAST R0 GL CHROMATIC<br />
CORRECTION FILTER<br />
Warmer glass LEE filter 205 1.0 96254526<br />
CONT R0 WG Wire guard 1.0 96002511<br />
CONT R0 LV Fixed anti glare louvre 0.7 96002508<br />
CONT R0 LV/AJ Adjustable anti glare louvre 0.7 96005841<br />
CONT R0 AGF Spill light controller 1.0 96216220<br />
CONT R0 VS Visor 0.4 96002516<br />
CONTRAST C0/R0 AGS (x1) Barn door (x1) 1.0 96002507<br />
RGB SIGNAL BOOSTER X 2 FOR DMX 2.6 96009848<br />
RGB SIGNAL BOOSTER X 4 FOR DMX 3.0 96012407<br />
RGB MEMORY BOX 1.7 96253059<br />
RGB SOFTWARE CD 0.1 96012354<br />
RGB DMX LINE TERMINATION 0.1 96012408<br />
Wire guard Adjustable louvre Chromatic filter<br />
Visor<br />
www.thornlighting.com.au<br />
<strong>Lighting</strong> people and places<br />
19<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
20<br />
Contrast C<br />
A high performance floodlight available in<br />
two sizes with a wide selection of refractors<br />
and attachments<br />
Ordering Guide Lamp to be ordered separately.<br />
For complete fitting please order floodlight and gear tray.<br />
Description<br />
SIZE 1<br />
Ilcos Code Socket Wt (kg) Floodlight<br />
SAP Code<br />
<strong>Lighting</strong> people and places<br />
Gear Tray<br />
SAP Code<br />
CONTRASTC HST 100W ST E40 11.9 96002442 96216046<br />
CONTRASTC HST 150W ST E40 11.9 96002442 96011309<br />
CONTRASTC HIT-CE<br />
SIZE 2<br />
MT G12 11.9 96002443 96011417<br />
CONTRASTC HST 250W ST E40 19.5 96005827 96011251<br />
CONTRASTC HST 400W ST E40 19.5 96005828 96011253<br />
CONTRASTC HIT 250W MT E40 19.5 96005827 96011249<br />
CONTRASTC HIT 400W MT E40 19.5 96005828 96011250<br />
ATTACHMENTS (See also Page 26)<br />
Description Size 1 Size 2 Description Size 1 Size 2<br />
SAP Code SAP Code<br />
SAP Code SAP Code<br />
Colour Filters Refractors<br />
BLUE 96002451 96002428 NO.1 96002459 96002423<br />
GREEN 96002452 96002427 NO.2 96002460 96002424<br />
RED 96002454 96002429 NO.3 96002461 96002425<br />
YELLOW 96002453 96002430<br />
BARN DOOR* 96002471 96002438 SPILL SHIELDS 96216223 96216224<br />
FIXED LOUVRE 96002470 96002416<br />
WIRE GUARD 96002472 96002432<br />
VISOR<br />
*Cat. No. supplies one door, four required per luminaire<br />
96002517 96002519<br />
HIT (MT) E40 250 - 400W<br />
HST(ST) E40 100 - 400W<br />
HIT-CE (MT) G12 150W<br />
AS/NZS60598 Class II Electrical<br />
6 Nm Impact resistant IP65<br />
• Neat appearance retained<br />
across range, with integral<br />
gear for lamps from 100W to<br />
400W<br />
• Front glasses and refractors<br />
can be rotated to give<br />
alignment of the beam profile<br />
to suit the application<br />
• Aiming simplified by indicator<br />
on stirrup, with facility to lock<br />
memory position<br />
• Stirrup mount allows base<br />
support or suspension<br />
• Hinged frame for easy<br />
access to light source. Lamp<br />
replacement possible without<br />
disturbing aiming angle or<br />
removing attachments<br />
www.thornlighting.com.au
Materials/Finish<br />
Body: die-cast aluminium,<br />
textured grey powder coated<br />
finish (close to RAL 9007).<br />
Front lenses: 4mm toughened<br />
glass.<br />
Attachment retaining screws:<br />
nickel plated brass.<br />
Reflector: specular (HIT) or satin<br />
(HST) anodised aluminium.<br />
Installation/Mounting<br />
Floodlight is fully adjustable on<br />
a short stirrup. Aiming simplified<br />
by indicator on stirrup, locked<br />
via central Ø8mm Allen screw.<br />
Easy access to lamp via two<br />
Allen screws. Lamp replacement<br />
possible without removing<br />
attachments. Control gear<br />
compartment, with rear access<br />
panel, fixed below body. Entry<br />
via two Allen screws.<br />
Refractor No.1 Refractor No.2 Refractor No.3<br />
600<br />
500<br />
400<br />
300<br />
200<br />
100<br />
cd/1000 lm<br />
0<br />
-90° -60° -30° 0° 30° 60° 90°<br />
I max: Cat. 616 No. Cd Size 1000lm 0 + Refractor N°1<br />
I max/2: Lamp: HIT Horizontal Ceramic = 70 2 x W31°<br />
Vertical I max: = 2 616 x 22° Cd/1000lm<br />
horizontal Horizontal<br />
vertical Vertical<br />
I max/2: Horizontal = 2 x 31° Vertical = 2 x 22°<br />
www.thornlighting.com.au<br />
Cable gland for Ø7.5-13mm<br />
cable. Additional knock out<br />
provided for through wiring.<br />
Attachments - see page 26.<br />
Specification<br />
To specify state:<br />
Asymmetrical distribution<br />
floodlight, in choice of 2 sizes<br />
to accommodate 100W to<br />
400W lamps, IP65 protected,<br />
integral gear, and optional<br />
control attachments.<br />
As Thorn Contrast C.<br />
600<br />
500<br />
400<br />
300<br />
200<br />
100<br />
cd/1000 lm<br />
0<br />
-90° -60° -30° 0° 30° 60° 90°<br />
Cat. I max: No. 431 Size Cd 0 1000lm + Refractor N°2 horizontal Horizontal<br />
Lamp: I max/2: HIT Horizontal Ceramic 70 = W2<br />
x 31° vertical Vertical<br />
I Vertical max: 431 = 2 Cd/1000lm x 35°<br />
I max/2: Horizontal = 2 x 31° Vertical = 2 x 35°<br />
600<br />
500<br />
400<br />
300<br />
200<br />
100<br />
185<br />
225<br />
200<br />
Size 1<br />
Size 2<br />
250<br />
485<br />
580<br />
cd/1000 lm<br />
420<br />
500<br />
400<br />
490<br />
0<br />
-90° -60° -30° 0° 30° 60° 90°<br />
I Cat. max: No. 506 Size Cd 0 1000lm + Refractor N°3<br />
I Lamp: max/2: HIT Horizontal Ceramic 70 = 2 Wx<br />
31°<br />
Vertical I max: = 506 2 x Cd/1000lm 20°<br />
horizontal Horizontal<br />
vertical Vertical<br />
I max/2: Horizontal = 2 x 31° Vertical = 2 x 20°<br />
<strong>Lighting</strong> people and places<br />
21<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
22<br />
Contrast R<br />
A high performance<br />
symmetrical floodlight available<br />
in two sizes with a wide<br />
selection of front glasses,<br />
refractors and attachments<br />
<strong>Lighting</strong> people and places<br />
• Neat appearance retained<br />
across range, with integral<br />
gear for lamps from 100W<br />
to 400W<br />
• Wide selection of attachments,<br />
which can be used in<br />
combination, allows for a<br />
variety of beam distributions<br />
• Front glasses and refractors<br />
can be rotated to give<br />
alignment of the beam profile<br />
to suit the application<br />
185<br />
310<br />
Size 1<br />
480<br />
420<br />
360<br />
HIT (MT) E40 250 - 400W<br />
HIT-CE (MT) G12 150W<br />
HST (ST) E40 100 - 400W<br />
AS/NZS60598 Class II Electrical<br />
6 Nm Impact resistant IP65<br />
• Aiming simplified by indicator<br />
on stirrup, with facility to lock<br />
memory position<br />
• Hinged frame for easy<br />
access to light source. Lamp<br />
replacement possible without<br />
disturbing aiming angle or<br />
removing attachments<br />
225<br />
360<br />
Size 2<br />
550<br />
500<br />
450<br />
www.thornlighting.com.au
Materials/Finish<br />
Body: die-cast aluminium,<br />
textured grey powder coated<br />
finish (close to RAL 9007).<br />
Front lenses: 4mm toughened<br />
glass.<br />
Attachment retaining screws:<br />
Nickel plated brass.<br />
Reflector: specular (HIT) or satin<br />
(HST) anodised aluminium.<br />
Installation/Mounting<br />
Floodlight is fully adjustable on<br />
a short stirrup. Stirrup fixed<br />
to mount by central bolt hole<br />
Ø22mm, and Ø2 x 15mm holes<br />
at 100mm either side of centre.<br />
Aiming simplified by indicator on<br />
stirrup, locked via central Ø8mm<br />
Allen screw. Easy access to<br />
lamp via two Allen screws. Lamp<br />
replacement possible without<br />
removing attachments. Control<br />
gear compartment, with rear<br />
access panel, fixed below body.<br />
Entry via two Allen screws.<br />
Cable gland for Ø7.5-13mm<br />
cable. Additional knock out<br />
provided for through wiring.<br />
Attachments - see page 26.<br />
Specification<br />
To specify state:<br />
Symmetrical distribution<br />
floodlight, in choice of 2 sizes<br />
to accommodate 100W to<br />
400W lamps, IP65 protected,<br />
integral gear, and optional<br />
control attachments.<br />
As Thorn Contrast R.<br />
www.thornlighting.com.au<br />
Reflector No.1 Reflector No.2 Reflector No.3<br />
4200<br />
3500<br />
2800<br />
2100<br />
1400<br />
700<br />
cd/1000 lm<br />
0<br />
-90 -60 -30 0 30 60 90<br />
Lamp Type: HIT-CE 70W<br />
horizontal<br />
I max: 3753 Cd/1000lm<br />
vertical<br />
I max/2: Horizontal = 2 x 5 Vertical = 2 x 20<br />
4200<br />
3500<br />
2800<br />
2100<br />
1400<br />
700<br />
cd/1000 lm<br />
0<br />
-90° -60° -30° 0° 30° 60° 90°<br />
Lamp Type: HIT-CE 70W<br />
horizontal<br />
I max: 2573 Cd/1000lm<br />
vertical<br />
I max/2: Horizontal = 2 x 5 Vertical = -32, +30<br />
Ordering Guide Lamps to be ordered separately. For complete fitting please order<br />
floodlight and gear tray.<br />
Description<br />
Size 1<br />
Ilcos Code Socket Wt (kg) Floodlight<br />
SAP Code<br />
4200<br />
3500<br />
2800<br />
2100<br />
1400<br />
700<br />
cd/1000 lm<br />
0<br />
-90 -60 -30 0 30 60 90<br />
Lamp Type: HIT-CE 70W<br />
horizontal<br />
I max: 2829 Cd/1000lm<br />
vertical<br />
I max/2: Horizontal = 2 x 5 Vertical = 2 x 13<br />
Gear Tray<br />
SAP Code<br />
CONTRASTR HST 100W ST E40 10.6 96002440 96216046<br />
CONTRASTR HST 150W ST E40 10.6 96002440 96011309<br />
CONTRASTR HIT-CE 150W<br />
Size 2<br />
MT G12 10.6 96002441 96011417<br />
CONTRASTR HST 250W ST E40 16.9 96002408 96011251<br />
CONTRASTR HST 400W ST E40 16.9 96002408 96011253<br />
CONTRASTR HIT 250W MT E40 16.9 96002514 96011249<br />
CONTRASTR HIT 400W MT E40 16.9 96002439 96011250<br />
ATTACHMENTS (See also page 26)<br />
Description Size 1 Size 2<br />
Colour Filters<br />
SAP Code SAP Code<br />
BLUE 96002455 96002420<br />
GREEN 96002456 96002419<br />
RED 96002458 96002421<br />
YELLOW 96002457 96002422<br />
BARN DOOR* 96002471 96002438<br />
FIXED LOUVRE 96002469 96002415<br />
WIRE GUARD 96002473 96002431<br />
VISOR 96002518 96002520<br />
*Cat. No. supplies one door, four required per luminaire<br />
Description Size 1<br />
SAP Code<br />
Refractors<br />
Size 2<br />
SAP Code<br />
NO. 1 96002462 96001962<br />
NO. 2 96002463 96002417<br />
NO. 3 96002464 96001964<br />
SPILL SHIELD 96216221 96012353<br />
<strong>Lighting</strong> people and places<br />
23<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
24<br />
Contrast Mini<br />
Pinspot<br />
A miniature floodlight for<br />
20W metal halide lamps<br />
with a selection of glasses<br />
and attachments<br />
Ordering Guide Lamps to be ordered separately.<br />
Description Ilcos Code Socket Wt (kg) SAP Code<br />
MINI PINSPOT 20W HIT-TC-CE G8.5 L INT MT G8.5 1.4 96009852<br />
MINI PINSPOT 20W HIT-TC-CE G8.5 L EXT<br />
Attachments and accessories<br />
MT G8.5 1.4 96009853<br />
MINI PINSPOT GL FR ETCHED FROSTED GLASS 0.1 96009858<br />
MINI PINSPOT GL A/S EXT (OMW) OMW WIDE LENS 0.1 96009859<br />
MINI PINSPOT GL A/S SINT (OMP) OMP MEDIUM LENS 0.1 96009860<br />
MINI PINSPOT FILTER BLU BLUE FILTER 0.5 96009862<br />
MINI PINSPOT FILTER RED RED FILTER 0.5 96009863<br />
MINI PINSPOT FILTER GRN GREEN FILTER 0.5 96009864<br />
MINI PINSPOT FILTER YEL YELLOW FILTER 0.5 96009865<br />
L - Large rectangular base, INT - Intensive reflector, EXT - Extensive reflector<br />
<strong>Lighting</strong> people and places<br />
• Ideal for precise lighting<br />
of sculptures, plants, trees<br />
or signage, or the emphasis<br />
of architectural detail<br />
• Sealed to IP65<br />
• Glasses and attachments can<br />
be used in combination for a<br />
variety of beam distributions<br />
• Surface mounting<br />
• Integral electronic gear<br />
• Choice of reflectors -<br />
(intensive): 8° (extensive):18°<br />
HIT-TC-CE (MT) G8.5 20W<br />
AS/NZS60598 Class I Electrical<br />
IK08/5 Nm IP65<br />
Materials/Finish<br />
Body: die-cast aluminium,<br />
textured grey powder coated<br />
finish (close to RAL 9007).<br />
Front lenses: 4mm toughened<br />
glass.<br />
Attachment retaining screws:<br />
Nickel plated brass.<br />
Reflector: for narrow or wide<br />
beams.<br />
Fixing bolts and screws:<br />
stainless steel.<br />
Installation/Mounting<br />
Floodlight rotates 360° around<br />
its axis. Locked by two Ø4mm<br />
screws. Easy access to lamp<br />
via four screws which fix the<br />
protective glass. Fixing to wall<br />
or surface by two screw holes<br />
in the base. After installing gear<br />
plate the body locates (by three<br />
Allen screws) giving automatic<br />
electrical connection. Cable<br />
gland for Ø8-10mm cable.<br />
Additional knockout provided for<br />
through wiring on large<br />
base only.<br />
Specification<br />
To specify state:<br />
Miniature surface mounting<br />
mains voltage floodlights, with<br />
choice of reflector (intensive/<br />
extensive), integral gear, IP65<br />
protection, 117and<br />
with choice of<br />
colour filters and beam control<br />
attachments. 105<br />
As 195 Thorn Contrast Mini Pinspot.<br />
203<br />
55<br />
48<br />
120°<br />
Ø 95<br />
117<br />
159<br />
105<br />
105<br />
90° 3000 2000 1000 90°<br />
60°<br />
Cd/1000lm<br />
150°<br />
150°<br />
30°<br />
0°<br />
Contrast Pinspot<br />
Lamp: 20W HIT-TC-CE<br />
LOR: 0.51<br />
30°<br />
120°<br />
60°<br />
www.thornlighting.com.au
Contrast Pinspot<br />
A floodlight for halogen<br />
and metal halide lamps<br />
with a selection of<br />
glasses and attachments<br />
• Ideal for precise lighting of<br />
sculptures, plants, trees or<br />
signage, or to emphasise<br />
architectural detail<br />
• Sealed to IP65<br />
• Base houses control gear<br />
www.thornlighting.com.au<br />
Materials/Finish<br />
Body: die-cast aluminium,<br />
textured grey powder coated<br />
finish (close to RAL 9007).<br />
Front lenses: 4mm toughened<br />
glass.<br />
Attachment retaining screws:<br />
Nickel plated brass.<br />
Fixing bolts and screws:<br />
stainless steel.<br />
Installation/Mounting<br />
Floodlight rotates 360° around<br />
its axis. Locked by two Ø4mm<br />
screws. Easy access to lamp<br />
via four screws which fix the<br />
protective glass. Fixing to wall<br />
or surface by two screw holes<br />
in the base. After installing gear<br />
plate the body fixes (by three<br />
Allen screws) giving automatic<br />
electrical connection.<br />
Cable gland for Ø6-12mm<br />
cable. Through wiring possible<br />
via side knock-out.<br />
240<br />
60<br />
132<br />
196<br />
140<br />
140<br />
QR70-LP (HHG) BA15d 50W<br />
HIPAR20 (HR) E27 35W<br />
AS/NZS60598 Class I Electrical<br />
5 Nm Impact resistant IP65<br />
Specification<br />
To specify state.<br />
Small surface mounting mains<br />
voltage floodlight, IP65 protected,<br />
integral gear, and with choice<br />
of colour filters.<br />
As Thorn Contrast Pinspot.<br />
120<br />
90<br />
60<br />
625<br />
1250<br />
1875<br />
2500<br />
30<br />
0<br />
Contrast Pinspot<br />
Lamp: 35W HIPAR20<br />
LOR: 72.5<br />
Ordering Guide Lamps to be ordered separately.<br />
Description Ilcos Code Socket Wt (kg) SAP Code<br />
PINSPOT QR70 50W HHG BA15D 4.2 96002712<br />
PINSPOT HI-PAR20 35W<br />
Attachments (see also page 24)<br />
HR E27 4.3 96002716<br />
BLUE COLOUR FILTER 0.3 96002478<br />
GREEN COLOUR FILTER 0.3 96002481<br />
RED COLOUR FILTER 0.3 96002479<br />
YELLOW COLOUR FILTER 0.3 96002480<br />
120<br />
90<br />
60<br />
30<br />
<strong>Lighting</strong> people and places<br />
Loreto Primary School, Kirribilli, NSW<br />
25<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
26<br />
Contrast Attachments<br />
A large choice of attachments with a unique<br />
fixing system, allowing them to superimpose<br />
one on the other, to offer a variety of<br />
lighting effects<br />
Fixing<br />
All attachments are supplied<br />
with a mounting frame which<br />
fixes via 2 or 4 nickel plated or<br />
stainless steel screws arranged<br />
symmetrically on the face of the<br />
frame. These allow any number<br />
of attachments to be mounted<br />
together, one on the other.<br />
<strong>Lighting</strong> people and places<br />
Contrast C Contrast R<br />
90° Fixed Louvre for all versions<br />
Wire Guard - Grille protecting glass against shocks<br />
Barn Doors - To cut-off the intensity in the horizontal or vertical plane. Adjustable and lockable<br />
Colour Filters - Selection in blue, red, yellow<br />
and green. Supplied mounted in fixing<br />
frame Aluminium visor. Can be mounted in<br />
four positions<br />
Colour Filters - Selection in blue, red, yellow<br />
and green. Supplied mounted in fixing<br />
frame Aluminium visor. Can be mounted in<br />
four positions<br />
Pinspot<br />
Colour Filters - Selection in blue, red, yellow<br />
and green. Supplied mounted in fixing<br />
frame<br />
www.thornlighting.com.au
www.thornlighting.com.au<br />
IMAGE TBC<br />
<strong>Lighting</strong> people and places<br />
27<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
28<br />
QBA LED<br />
A highly energy efficient floodlight<br />
available in a choice of colours<br />
and controls which enables<br />
creative lighting schemes to be<br />
implemented quickly and easily<br />
• All QBA LED floodlights can<br />
easily be combined with<br />
other QBA products, allowing<br />
existing installations to be<br />
augmented with confidence<br />
• 18 LEDs for monochromatic<br />
versions (from +/- 5.6° to 6.6°<br />
beam)<br />
• 8 multichip LEDs for the RGB<br />
version (12° beam) for better<br />
colour mixing<br />
• Easy to combine with<br />
conventional QBA floodlights<br />
• Integrated DMX connection<br />
card for the RGB version<br />
• Integral gear for all versions<br />
<strong>Lighting</strong> people and places<br />
LED<br />
LEDs (Pre-fixed PCB with LEDs) 24-36W<br />
AS/NZS60598 Class I Electrical<br />
IP66 IK08<br />
Ordering Guide One code includes the QBA LED with integral power supply for the monochromatic<br />
versions and power supply + DMX system for the RGB version.<br />
Description<br />
Monochromatic versions<br />
Wt (kg) SAP Code<br />
QBA LED 24W 18LED WHI/6000K 6.0 96254271<br />
QBA LED 24W 18LED WHI/3000K 6.0 96254272<br />
QBA LED 24W 18LED BLU 6.0 96254273<br />
QBA LED 24W 18LED RED 6.0 96254274<br />
QBA LED 24W 18LED GRN 6.0 96254275<br />
QBA LED 24W 18LED AMB<br />
RGB version<br />
6.0 96254276<br />
QBA LED 36W 8LED RGB DMX 5.8 96254277<br />
Accessories Ordering Guide<br />
Description Wt (kg) SAP Code<br />
QBA VS Visor 0.4 96012228<br />
QBA WG Wire guard 0.4 96012229<br />
QBA AGS (x4) Set of 4 barn doors 0.8 96012230<br />
QBA LV Louvre 0.8 96012231<br />
QBA FILTER REFR 555B V Vertical prism 0.6 96220097<br />
QBA FILTER REFR 555B H Horizontal prism 0.6 96220098<br />
QBA GL CHROMATIC CORRECTION FILTER Warmer glass LEE filter 205 0.4 96254527<br />
QBA SHORT STIRRUP Wall stirrup 0.4 96012236<br />
RGB SIGNAL BOOSTER X 2 FOR DMX 2.6 96009848<br />
RGB SIGNAL BOOSTER X 4 FOR DMX 3.0 96012407<br />
RGB MEMORY BOX 1.7 96253059<br />
RGB SOFTWARE CD 0.1 96012354<br />
RGB DMX LINE TERMINATION 0.1 96012408<br />
www.thornlighting.com.au
www.thornlighting.com.au<br />
Materials/Finish<br />
Body, frame and accessories:<br />
die-cast aluminium (LM6) with<br />
textured grey powder coated<br />
finish.<br />
Body screws: stainless steel.<br />
Attachment retaining screws:<br />
nickel plated brass.<br />
Front glass: toughened glass.<br />
Installation/Mounting<br />
QBA LED luminaires are<br />
adjustable on a stirrup. Aiming is<br />
simplified by an indicator on the<br />
body sides, locked via a central<br />
ø8mm Allen screw. Short wall<br />
mounted stirrup also available as<br />
an accessory. To connect fittings,<br />
installers simply open the rear<br />
part of the luminaire to access<br />
the inside connector.<br />
For electrical connection: cable<br />
gland for 6-11mm diameter<br />
cable.<br />
For the DMX connection (RGB<br />
version only) a DMX cable (not<br />
supplied) is required for creative<br />
effects. For DMX512 cable the<br />
connection requires two 7mm<br />
cable glands. Data+, data- and<br />
ground are routed to the DMX<br />
connector.<br />
Specification<br />
To specify state:<br />
Compact rectangular LED<br />
floodlight for wall washing.<br />
Die-cast aluminium body with<br />
concealed stirrup. Sealed<br />
IP66. With a choice of 6<br />
monochromatic colours (2 white,<br />
Red, Blue, Green and Amber)<br />
and dynamic RGB employing<br />
LED light source with integral<br />
power supply for monochromatic<br />
versions or power supply plus<br />
DMX driver for the RGB version.<br />
Other DMX components ordered<br />
separately.<br />
As Thorn QBA LED.<br />
40<br />
146<br />
66<br />
203<br />
229<br />
229<br />
208<br />
35 35<br />
7x10 Ø16.5<br />
Ø7<br />
139<br />
212<br />
<strong>Lighting</strong> people and places<br />
29<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
30<br />
QBA<br />
A robust compact<br />
discharge floodlight for<br />
architectural lighting<br />
<strong>Lighting</strong> people and places<br />
• Rectangular compact projector<br />
with smooth edges and<br />
concealed stirrup, in die-cast<br />
aluminium<br />
• Two body sizes<br />
• All versions have integral gear<br />
• Two available beam patterns,<br />
produced by precision reflector<br />
systems<br />
• Aiming simplified by indicator<br />
on stirrup<br />
• Choice of light sources: metal<br />
halide or high pressure sodium<br />
• Wide selection of attachments,<br />
which can be superimposed<br />
one on the other to offer a<br />
variety of lighting effects<br />
• Easy access to lamp, without<br />
removing attachments<br />
HIT-CE (MT) G12 70-150W<br />
HIT-DE (MD) Rx7s 70-150W<br />
HST-DE (SD) Rx7s 70-150W<br />
AS/NZS60598<br />
6 Nm Impact resistant<br />
IP65<br />
Class I Electrical<br />
Materials/Finish<br />
Body: die-cast aluminium, grey<br />
powder coated close to<br />
RAL 9007.<br />
Body screws: stainless steel.<br />
Front lenses: 4mm toughened<br />
glass.<br />
Attachment retaining screws:<br />
nickel plated brass.<br />
Installation/Mounting<br />
Floodlight is fully adjustable on<br />
a short stirrup. Aiming simplified<br />
by indicator on stirrup, locked<br />
via central Ø8mm Allen screw.<br />
Easy access to lamp via two<br />
Allen screws. Lamp replacement<br />
possible without removing<br />
attachments. Cable gland for<br />
Ø7.5-13mm cable. Additional<br />
knockout provided for through<br />
wiring.<br />
Specification<br />
To specify state:<br />
Rectangular, compact floodlight<br />
with concealed stirrup, in diecast<br />
aluminium with asymmetric/<br />
symmetric/intensive optical<br />
system for 70W/150W<br />
HIT-CE/HIT-DE/HST-DE lamps.<br />
Sealed to IP65.<br />
As Thorn QBA.<br />
www.thornlighting.com.au
Ordering Guide Lamp to be ordered separately.<br />
Description Ilcos Code Socket Wt (kg) SAP Code<br />
Size 1<br />
QBA INTENSIVE SYMMETRIC HIT-CE 70W MT G12 4.9 96012214<br />
QBA ASYMMETRIC HIT-DE 70W MD RX7S 4.9 96012208<br />
QBA ASYMMETRIC HPS-DE 70W SD RX7S 4.9 96012204<br />
QBA EXTENSIVE SYMMETRIC HIT-CE 70W<br />
Size 2<br />
MT G12 4.9 96012212<br />
QBA ASYMMETRIC HIT-DE/HPS-DE 150W MD/SD RX7S 6.3 96012222<br />
QBA EXTENSIVE SYMMETRIC HIT-CE 150W MT G12 6.3 96012224<br />
QBA INTENSIVE SYMMETRIC HIT-CE 150W<br />
Attachments<br />
MT G12 6.3 96012226<br />
VISOR 96012228<br />
WIRE GUARD 96012229<br />
BARN DOOR (SET OF 4) 96012230<br />
LOUVRE 96012231<br />
COLOUR FILTER, BLUE 96012232<br />
COLOUR FILTER, RED 96012233<br />
COLOUR FILTER, GREEN 96012234<br />
COLOUR FILTER, YELLOW 96012235<br />
SHORT STIRRUP FOR CLOSE WALL MOUNTING<br />
Note: Size 1 and 2 projectors have same size face, therefore attachments fit either version<br />
96012236<br />
www.thornlighting.com.au<br />
500<br />
375<br />
250<br />
125<br />
0˚<br />
-90˚ -60˚ -30˚ 0˚ 30˚ 60˚ 90˚<br />
Qba Asymmetric<br />
Lamp: 70W HIT-CE<br />
LOR: 58%<br />
Horizontal horizontal<br />
Vertical vertical<br />
Wire guard Barn doors Louvre Red filter + visor<br />
Definition Performance<br />
Reflector Beam shape<br />
Symmetric (Intensive)<br />
Symmetric (Extensive)<br />
Asymmetric<br />
Size 1<br />
227<br />
212<br />
234<br />
188<br />
139<br />
145<br />
Size 2<br />
227<br />
212<br />
264<br />
219<br />
139<br />
145<br />
<strong>Lighting</strong> people and places<br />
31<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
32<br />
D-CO LED Flood<br />
LED floodlight for facade<br />
or feature lighting<br />
<strong>Lighting</strong> people and places<br />
LED NEW<br />
50<br />
60<br />
138<br />
LED (Pre-fixed PCB with LEDs) 6x1.2W<br />
AS/NZS60598<br />
IP67<br />
Class I Electrical<br />
• Circular compact floodlight<br />
with smooth edges<br />
• Built-in visor to limit glare<br />
• Integral Control gear<br />
• 6 x 1.2W Warm White LEDs<br />
Materials/Finish<br />
Body: aluminium, finished in<br />
grey.<br />
Glass: toughened glass.<br />
Gasket: anti-ageing silicone.<br />
Stirrup: aluminium finished in<br />
grey.<br />
Installation/Mounting<br />
Surface mounted. Pre-wired with<br />
H05RN-F, 5m length cable.<br />
To facilitate quick installation,<br />
the wiring can be done via IP67<br />
wiring connectors (SAP codes<br />
96257910 or 96257911).<br />
Specification<br />
To specify state:<br />
LED floodlights pre-wired with<br />
5m cable, with integral power<br />
supply and visor. Supplied<br />
complete with 3000K LEDs.<br />
Sealed to IP67.<br />
As Thorn D-CO LED Flood.<br />
cd<br />
3000<br />
2500<br />
2000<br />
1500<br />
1000<br />
500<br />
0<br />
-90˚<br />
-60˚<br />
-30˚<br />
D-CO F LED FLOOD2 3000K<br />
Imax: 2410cd<br />
Flux: 179lm<br />
Aperture Imax/2: 2 x 6.1°<br />
0˚ 30˚<br />
60˚ 90˚<br />
Ordering Guide Supplied complete with LEDs.<br />
Description Wt (kg) SAP Code<br />
D-CO F LED FLOOD2 6X1.2W WHI 3K 0.9 96536650<br />
www.thornlighting.com.au
OQ 1000/OSQ<br />
A narrow beam, high intensity<br />
projector for feature lighting<br />
employing metal halide or<br />
tungsten halogen lamps<br />
CSI version<br />
www.thornlighting.com.au<br />
• Suitable for lighting statues,<br />
towers, flag poles<br />
and signs<br />
• Variation in beam achieved<br />
by a choice of front glass<br />
• Metal halide version supplied<br />
with warm white 3000K<br />
colour temperature lamp<br />
• Integral control gear (except<br />
1000W version)<br />
• Tungsten halogen versions<br />
for 300W and 500W lamps<br />
(not supplied)<br />
Materials/Finish<br />
Two-part body: LM6 cast<br />
aluminium, finished black.<br />
Metal halide wiring box:<br />
cast aluminium.<br />
Tungsten halogen wiring box:<br />
black moulded plastic.<br />
Stirrup: galvanised steel.<br />
Lens bezel: aluminium.<br />
Installation/Mounting<br />
Floodlight is fully adjustable on<br />
stirrup. Fixes via central Ø22mm<br />
hole. Two additional Ø11mm<br />
holes at 102mm centres.<br />
Rear section is removable for<br />
relamping without disturbing<br />
aiming angle. Combined gland/<br />
cord grip for Ø9-12mm cable in<br />
20mm entry. Floodlight must be<br />
mounted at least 2.25m from any<br />
combustible material. Tungsten<br />
halogen version uses clear front<br />
glass retained by aluminium<br />
bezel. 150W metal halide<br />
version has a cast aluminium box<br />
with integral control gear fixed to<br />
rear of floodlight. 1000W metal<br />
halide version requires external<br />
gear box (Ordered separately).<br />
Note: Metal halide floodlight<br />
should not be operated without<br />
a front glass. Versions supplied<br />
without glass, glass must be<br />
ordered separately.<br />
HIT (MT) G12 150W<br />
QT (HSG) GY9.5 300 - 500W<br />
HIR (MR) G38 1000W<br />
AS/NZS60598 Class I Electrical<br />
20 Nm Impact resistant IP54<br />
Specification<br />
To specify state:<br />
Enclosed narrow beam exterior<br />
floodlight with cast LM6<br />
aluminium body for single ended<br />
150W HIT or 300W/500W QT<br />
or 1000W HIR lamps.<br />
As Thorn OQ/OSQ.<br />
47100<br />
39250<br />
31400<br />
23550<br />
15700<br />
7850<br />
0<br />
-90 -60 -30 0 30 60 90<br />
Sunspot Cat. with No. clear OSQ glass 150 + OMC<br />
Lamp: 150W HIT<br />
Beam data<br />
horizontal Horizontal<br />
vertical Vertical<br />
Peak intensity (l) cd/klm 47000<br />
Beam factor to 10% peak (l) 0.29<br />
Beam angle to 10% of peak (l) Horizontal 2 x 4°<br />
Vertical 4°/5°<br />
Beam angle to 50% of peak (l) Horizontal 2 x 2°<br />
Vertical 2°/2°<br />
Beam angle to 1% of peak (l) Horizontal 2 x 9°<br />
Vertical 8°/8°<br />
380<br />
HIT version<br />
QT version<br />
cd/1000 lm<br />
Ordering Guide HIT 150W supplied with lamp but front glass must<br />
be ordered separately. QT 300/500W supplied with front glass but<br />
lamp to be ordered separately.<br />
Description Ilcos Code Socket Wt (kg) SAP Code<br />
SUNSPOT HIT 150W WITH GEAR, LAMP,<br />
LESS FRONT GLASS<br />
MT G12 11.0 96006340<br />
SUNSPOT 300/500W QT WITH CLEAR<br />
OMC GLASS, LESS LAMP<br />
HSG GY9.5 7.2 96011354<br />
CSI 1000W WITH 3-WIRE IGNITOR L/L*<br />
Attachments<br />
MR G38 8.0 96002077<br />
CLEAR GLASS SYMMETRIC 96002556<br />
STIPPLED GLASS SYMMETRIC 96002557<br />
PRISMATIC GLASS DI-SYMMETRIC 96005275<br />
WIDE GLASS<br />
Control Gear (1000W version)<br />
DI-SYMMETRIC 96002144<br />
CSI 1000W WP 240V NI FUSED 96038300<br />
WP - Weatherproof, NI - No ignitor<br />
*Control Gear to be ordered separately for 1000W version.<br />
320<br />
262<br />
262<br />
282<br />
102<br />
282<br />
102<br />
350<br />
350<br />
<strong>Lighting</strong> people and places<br />
33<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
34<br />
Cesar<br />
Cesar’s simple, cylindrical<br />
style, available in four sizes,<br />
offers a choice of adjustable<br />
light sources and superior<br />
highlighting<br />
By dusk By night<br />
<strong>Lighting</strong> people and places<br />
LED<br />
Std Reflector Std Reflector Std Reflector Std Reflector<br />
(Medium + + +<br />
intensity) Elliptical Lens Elliptical Lens Frosted Glass<br />
• Stainless steel screws promote<br />
additional resistance and easy<br />
maintenance<br />
• IP65 protection<br />
• Range of lamp types, lenses<br />
and wattages optimise light<br />
output and save energy<br />
• Delivered with integral gear<br />
• Safe and simple installation<br />
using a single tool<br />
• Automatic connection reduces<br />
installation time and cost<br />
• Double lamp versions<br />
available with independent<br />
electric circuits provide energy<br />
savings and help to control<br />
obtrusive light<br />
• Adjustable lamp positioning<br />
(except for TC-TEL models)<br />
enhances versatility<br />
• Semi-intensive reflectors<br />
combine excellent photometric<br />
performance with choice of<br />
beam angles, for creative<br />
effects (Intensive reflector and<br />
ellipsoidal lens as custom)<br />
• Colour effects can be created<br />
using colour filters or LED’s<br />
(size 1 only)<br />
LEDs 3W (size 1 only)<br />
TC-TEL (FSM) GX24q 2/4 18-42W<br />
HIT-TC-CE (MT) G8.5 35W<br />
HIT (MT) G12 70W-150W<br />
HST (ST) E27 70W<br />
AS/NZS60598 Class I Electrical<br />
IK08 IP65<br />
Materials/Finish<br />
Body and frame: die-cast<br />
aluminium EN AN4700<br />
and extruded ENAW 6060<br />
housing (copper free) with high<br />
corrosion resistance and powder<br />
coated close to RAL 9007 with<br />
corrosion resistance. Other RAL<br />
colours available on request.<br />
Reflector: pure aluminium.<br />
Front glass: toughened glass,<br />
thickness 6mm - size 1, 8mm -<br />
sizes 2 and 3, 12mm - size 4.<br />
Retaining screws: stainless steel<br />
INOX. Gasket: silicone.<br />
Installation/Mounting<br />
Suitable for exterior wall<br />
mounting. Fast connectors for<br />
electrical connection, cable<br />
diameters, size 1 min: 8mm<br />
max: 12mm, size 2,3,& 4<br />
min: 6mm, max 12mm.<br />
Specification<br />
To specify state:<br />
Contemporary wall mounted<br />
floodlight for 3W LED/18-42W<br />
TC-TEL/35W HIT-TC-CE/70W<br />
HIT/HST or 150W HIT-CE, in<br />
4 sizes, IP65 protected, gear<br />
integrated, optional colour filters,<br />
frosted glass or louvre available<br />
as accessories.<br />
As Thorn Cesar.<br />
Adjustable lamp position Frosted glass (attachment) Red colour filter (attachment) LED version (size 1 only)<br />
www.thornlighting.com.au
140x75<br />
Size 1<br />
55 Ø90 55 Ø90<br />
Down version<br />
235 140x75 235<br />
Up/down version<br />
www.thornlighting.com.au<br />
155x80<br />
Size 2<br />
70 Ø140<br />
Down version<br />
315<br />
155x80<br />
70 Ø140<br />
Up/down version<br />
Ordering Guide Lamps to be ordered separately (except LED versions).<br />
445<br />
160x95<br />
Size 3<br />
75 Ø200<br />
Down version<br />
Description Ilcos Code Socket Wt (kg) SAP Code<br />
Size 1 LED - Up/Downlight<br />
CESAR 1 2X3W 3LED WHI 1.9 96231452<br />
CESAR 1 2X3W 3LED BLU 1.9 96231453<br />
CESAR 1 2X3W 3LED GRN 1.9 96231454<br />
CESAR 1 2X3W 3LED RED 1.9 96231455<br />
CESAR 1 2X3W 3LED YEL<br />
Size 1 LED - Downlight<br />
1.9 96231456<br />
CESAR 1 1X3W 3LED WHI 1.7 96231435<br />
CESAR 1 1X3W 3LED BLU 1.7 96231436<br />
CESAR 1 1X3W 3LED GRN 1.7 96231437<br />
CESAR 1 1X3W 3LED RED 1.7 96231438<br />
CESAR 1 1X3W 3LED YEL<br />
Size 2 - Up/Downlight<br />
1.7 96231439<br />
CESAR 2 2X18W TC-TEL FSM GX24D-2 4.3 96231466<br />
CESAR 2 2X35W HIT-TC-CE<br />
Size 2 - Downlight<br />
MT G8.5 6.9 96231467<br />
CESAR 2 1X18W TC-T FSM GX24D-2 3.2 96231463<br />
CESAR 2 1X35W HIT/TC-CE<br />
Size 3 - Downlight<br />
MT G8.5 4.2 96231464<br />
CESAR 3 1X26/42W TC-TEL FSM GX24Q-4 7.3 96231474<br />
CESAR 3 1X70W HIT MT G12 8.7 96231475<br />
CESAR 3 1X70W HST<br />
Size 3 - Up/Downlight<br />
ST E27 8.7 96231476<br />
CESAR 3 2X26/42W TC-TEL FSM GX24Q-4 8.6 96231477<br />
CESAR 3 2X70W HIT MT G12 11.6 96231478<br />
CESAR 3 2X70W HST<br />
Size 4 - Downlight<br />
ST E27 12.6 96231479<br />
CESAR 4 1X150W HIT-CE<br />
Size 4 - Up/Downlight<br />
MT G12 14.3 96231490<br />
CESAR 4 2X150W HIT-CE<br />
Accessories<br />
MT G12 19.8 96231493<br />
CESAR 2 FILTER BLU 0.1 96231468<br />
CESAR 2 FILTER GRN 0.1 96231469<br />
CESAR 2 FILTER RED 0.1 96231470<br />
CESAR 2 FILTER YEL 0.1 96231471<br />
CESAR 2 FILTER FR 0.1 96231472<br />
CESAR 3 FILTER BLU 0.2 96231480<br />
CESAR 3 FILTER GRN 0.2 96231481<br />
CESAR 3 FILTER RED 0.2 96231482<br />
CESAR 3 FILTER YEL 0.2 96231483<br />
CESAR 3 FILTER FR 0.2 96231484<br />
CESAR 3/4 LV ANTI GLARE 0.1 96231485<br />
CESAR 4 FILTER BLU 0.3 96231494<br />
CESAR 4 FILTER GRN 0.3 96231495<br />
CESAR 4 FILTER RED 0.3 96231496<br />
CESAR 4 FILTER FR 0.3 96231498<br />
450<br />
160x93<br />
75 Ø200<br />
* 560 - 70W HST<br />
Up/down version<br />
445*<br />
160x97<br />
Size 4<br />
75 Ø250<br />
Down version<br />
550<br />
160x97<br />
75 Ø250<br />
Up/down version<br />
550<br />
<strong>Lighting</strong> people and places<br />
35<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
36<br />
Milo R/I<br />
An outdoor LED spotlight offering innovative<br />
beam adjustment and image projection<br />
<strong>Lighting</strong> people and places<br />
LED<br />
Milo R<br />
Milo I<br />
149<br />
162<br />
80<br />
147 (1)<br />
139 (2)<br />
164<br />
189 (1)<br />
181 (2)<br />
245 (1)<br />
237 (2)<br />
80<br />
110<br />
232<br />
163.8<br />
150.8<br />
262.7 (1)<br />
254.7 (2)<br />
304.7 (1)<br />
296.7 (2)<br />
164<br />
80<br />
360.7 (1)<br />
352.7 (2)<br />
80<br />
347.7<br />
110<br />
LEDs (Pre-fixed PCB with 1 LED) 2.4W<br />
AS/NZS60598 Class II Electrical<br />
IK09 IP65<br />
• Simple to use patented beam<br />
adjustment, which allows<br />
the beam to be altered<br />
after installation, simply<br />
by Allen key<br />
• Full range includes versions<br />
with remote and integral gear<br />
(Milo R & I)<br />
• Unique gobo support<br />
accessory available for<br />
outdoor image projection,<br />
has a fully weatherproofed<br />
IP65 compact body<br />
Materials/Finish<br />
Body/frame: injected aluminium<br />
textured grey powder coated<br />
finish (close to RAL 9007).<br />
Lenses: polycarbonate.<br />
Cable gland: glass-fibre<br />
reinforced polyamide.<br />
Led heatsink: Nickelled brass.<br />
Endcaps: stainless steel.<br />
Gasket: silicone.<br />
Lamps: 2.4W LED (prefixed<br />
PCB with 1 LED).<br />
Installation/Mounting<br />
Base secured with two M6 x<br />
25 screws. Installation aided<br />
with a fixing centre template<br />
to be found in installation<br />
instructions. Cable type required:<br />
HO7 RNF 2x1mm². Through<br />
wiring possible and product is<br />
supplied with two cable glands.<br />
Product supplied with two Allen<br />
screws to fix the orientation of<br />
optics, Extensive beam is 36°<br />
and Intensive beam is 8°. The<br />
maximum number of products<br />
in a series is 5 when using the<br />
corresponding external gear,<br />
with a maximum distance of<br />
33m between the products.<br />
Gobo support (image projection)<br />
insert gobo image (not supplied)<br />
in the gobo support, then<br />
directly thread without tools<br />
on to the luminaire. Required<br />
dimensions for the gobo image:<br />
external diameter: 25.8mm,<br />
image diameter: 20mm, printed<br />
on glass, metal or plastic.<br />
Specification<br />
To specify state:<br />
LED spotlight for 2.4W LEDs,<br />
with gobo attachment, integral<br />
or remote gear.<br />
As Thorn Milo R/I.<br />
www.thornlighting.com.au
GOBO Attachment<br />
www.thornlighting.com.au<br />
Ordering Guide Supplied complete with LED lamp.<br />
Milo R requires gear ordered separately.<br />
Description Wt (kg) SAP Code<br />
Milo R<br />
Gear<br />
MILO R GT 17W<br />
Bodies<br />
2.0 96231579<br />
MILO R 1X 2.4W LED WHI/6000K 1.0 96256601<br />
MILO R 1X 2.4W LED WHI/3000K 1.0 96256602<br />
MILO R 1X 2.4W LED BLU 1.0 96256598<br />
MILO R 1X 2.4W LED GRN 1.0 96256599<br />
MILO R 1X 2.4W LED RED 1.0 96256600<br />
MILO R 1X 2.4W LED AMB<br />
Attachments and Accessoires<br />
1.0 96256603<br />
MILO GOBO SUPPORT 0.6 96257018<br />
Milo I<br />
Bodies<br />
MILO I 1X 2.4W LED WHI/6000K 1.4 96256595<br />
MILO I 1X 2.4W LED WHI/3000K 1.4 96256596<br />
MILO I 1X 2.4W LED BLU 1.4 96256592<br />
MILO I 1X 2.4W LED GRN 1.4 96256593<br />
MILO I 1X 2.4W LED RED 1.4 96256594<br />
MILO I 1X 2.4W LED AMB<br />
Attachments and Accessories<br />
1.4 96256597<br />
MILO GOBO SUPPORT 0.6 96257018<br />
<strong>Lighting</strong> people and places<br />
37<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING
38<br />
Intensive LED<br />
Aesthetic, slim linear LED<br />
luminaire with a concentrated<br />
and uniform beam<br />
Ordering Guide Supplied complete with LEDs.<br />
Must order Mains Connection Kit to power luminaires.<br />
Description Wt (Kg) SAP No<br />
INTENSIVE LED 300 10W WHI/3000K 2.0 96063317<br />
INTENSIVE LED 300 10W WHI/5500K 2.0 96063318<br />
INTENSIVE LED 300 10W RED 2.0 96063319<br />
INTENSIVE LED 300 10W GRN 2.0 96063320<br />
INTENSIVE LED 300 10W BLU 2.0 96063321<br />
INTENSIVE LED 300 10W AMB 2.0 96063322<br />
INTENSIVE LED 600 20W WHI/3000K DMX 3.0 96063324<br />
INTENSIVE LED 600 20W WHI/5500K DMX 3.0 96063325<br />
INTENSIVE LED 600 20W RED DMX 3.0 96063326<br />
INTENSIVE LED 600 20W GRN DMX 3.0 96063327<br />
INTENSIVE LED 600 20W BLU DMX 3.0 96063328<br />
INTENSIVE LED 600 20W AMB DMX 3.0 96063329<br />
INTENSIVE LED 600 20W RGB DMX 3.0 96063330<br />
INTENSIVE LED 1200 45W WHI/3000K DMX 6.0 96063331<br />
INTENSIVE LED 1200 45W WHI/5500K DMX 6.0 96063332<br />
INTENSIVE LED 1200 45W RED DMX 6.0 96063333<br />
INTENSIVE LED 1200 45W GRN DMX 6.0 96063334<br />
INTENSIVE LED 1200 45W BLU DMX 6.0 96063335<br />
INTENSIVE LED 1200 45W AMB DMX 6.0 96063336<br />
INTENSIVE LED 1200 45W RGB DMX<br />
Accessories<br />
6.0 96063337<br />
INTENSIVE LED MAINS CONNECTION KIT 96536730<br />
DMX ADDRESSING KIT 96536683<br />
DMX PLAYBACK UNIT 96536684<br />
DMX PLAYBACK REMOTE 96536729<br />
WHI - White, BLU - Blue, GRN - Green, AMB - Amber<br />
<strong>Lighting</strong> people and places<br />
LED<br />
NEW<br />
• Slim linear style<br />
• 10° lenses for intensive beam<br />
angle<br />
• Choice of 6 colour outputs for<br />
monochromatic versions<br />
• RGB colour change options<br />
available<br />
• Available in 3 sizes<br />
• Integral control gear<br />
• RDM & DMX compatible<br />
(600 and 1200 versions only)<br />
mm<br />
74<br />
LED (Pre-fixed PCB with LEDs) 10-45W<br />
AS/NZS60598<br />
IP66<br />
Class I Electrical<br />
Materials/Finish<br />
Body/Frame: extruded aluminium<br />
End caps: die-cast aluminium<br />
Brackets: steel pivoting brackets<br />
Cover: Clear Polycarbonate<br />
Gasket: silicon.<br />
Installation/Mounting<br />
Surface mounted, pre-wired<br />
with 0.5 length cable (male/<br />
female connectors for loop in/<br />
out). Requires Mains Connector<br />
Kit to mains connection. DMX<br />
Addressing kit, Playback unit and<br />
Playback remote are required for<br />
dynamic RGB control.<br />
To facilitate quick installation,<br />
the wiring can be done via IP67<br />
wiring connectors (SAP codes<br />
96257910 or 96257911)<br />
For through wiring, IP67<br />
connection boxes can be<br />
used (SAP codes 96257907,<br />
96257908 or 96257909).<br />
Specification<br />
To specify state:<br />
Surface mounted linear intensive<br />
LED floodlight available in 6<br />
monochromatic colours and<br />
dynamic RGB, sealed to IP66.<br />
As Thorn Intensive LED.<br />
300/600/1200<br />
www.thornlighting.com.au<br />
146
Corniche<br />
Slim linear T16 luminaire<br />
providing ‘close off-set’<br />
facade illumination with<br />
good uniformity<br />
www.thornlighting.com.au<br />
• Ideal for providing a broad<br />
band of even illumination<br />
on a surface from a close<br />
mounting position<br />
• Built in thermal protection<br />
device maintains lamp<br />
operating temperature for<br />
optimum output<br />
• Neat profile enables<br />
unobtrusive installation<br />
• Supplied with high output T16<br />
fluorescent lamps, operating<br />
from electronic control gear<br />
• Available in 2 lengths: 617mm<br />
(24W) and 917mm (39W)<br />
• Choice of asymmetric or<br />
symmetric reflectors<br />
• Extruded aluminium body<br />
and aluminium end caps<br />
CORNICHE, 1 x 39W T16 A/S CORNICHE, 1 x 39W T16 S/S<br />
T16 (FD) G5 24-39W<br />
AS/NZS60598<br />
IP65<br />
Class II Electrical<br />
Materials/Finish<br />
Body: extruded aluminium,<br />
finished in powder coated<br />
polyester paint.<br />
End caps: aluminium, finished in<br />
powder coated polyester paint.<br />
Brackets: galvanised steel,<br />
finished in powder coated<br />
polyester paint.<br />
Lens: polycarbonate sealed<br />
by neoprene gasket.<br />
Faceted reflector: bandoxal<br />
aluminium.<br />
Screws: stainless steel.<br />
Installation/Mounting<br />
Supplied with a pre-wired 1.0m<br />
length of cable (3 x 1.0mm²)<br />
with a connected IP54 rated<br />
Wieland plug (4Kv/3 VDE<br />
0110/01.89). Terminal block<br />
capacity of Wieland plug:<br />
3 x 2.5mm². Access to lamp and<br />
control gear gained by removing<br />
front lens. The projector is<br />
supplied with two versatile<br />
brackets which can be slid along<br />
the length of the extrusion so that<br />
a variety of different fixing points<br />
are available. These brackets<br />
provide easy installation and<br />
maintenance on uneven surfaces.<br />
Specification<br />
To specify state:<br />
Wall washing linear floodlight<br />
for 24/39W T16 linear<br />
fluorescent lamps with symmetric/<br />
asymmetric light distribution and<br />
glass/polycarbonate enclosure.<br />
Sealed to IP65.<br />
As Thorn Corniche.<br />
917 (39 W)<br />
617 (24 W)<br />
Ordering Guide Supplied complete with lamp.<br />
Description<br />
Polycarbonate<br />
Ilcos Code Socket Wt (kg) SAP Code<br />
CORNICHE 39W T16/LI/830 E/PC A/S FDH G5 4.6 96010445<br />
CORNICHE 24W T16/LI/830 E/PC S/S FDH G5 3.2 96010440<br />
CORNICHE 39W T16/LI/830 E/PC S/S FDH G5 4.6 96010442<br />
CORNICHE 24W T16/LI/830 E/PC A/S<br />
Accessories<br />
FDH G5 3.2 96010444<br />
CORNICHE KIT HOOK FIX 0.8 96012339<br />
PC - Polycarbonate S/S - Symmetric A/S - Asymmetric<br />
140<br />
158<br />
158<br />
<strong>Lighting</strong> people and places<br />
39<br />
OUTDOOR<br />
ARCHITECTURAL SURFACE MOUNTED FLOODLIGHTING