MSDS - Promega

10/18/2012
Product code Description
Kit components
V4055 ADP-Glo Kinase Assay + BRK Kinase
Enzyme System
Components:
V4054 BRK Kinase Enzyme System
V9101 ADP-Glo Kinase Assay, 1000 Assays

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 1/6
Printing date 18.10.2012 Revision: 18.10.2012
Not classified as hazardous according to criteria of Australian Safety and Compensation Council
* 1 Identification of the substance/mixture and of the company/undertaking
Product identifier
Trade name: Turn Key Enzyme Substrates
Article number: Turnkey16
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation: Laboratory chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Promega Corporation
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
1-608-274-4330
1-800-356-9526
SDS author: Regulatory.Affairs@promega.com
Manufactured by:
Signal Chem
550-5600Parkwood Way
Richmond, BC V6V 2M2
Canada
Tel: 1-604-232-4600
Further information obtainable from:
Promega Australia
Suite W3A, Level 3, Westside Building
South Sydney Corporate Park
75-85 O'Riordan Street
(P.O. Box 7417)
Alexandria NSW 2015
Australia
Phone: (61) 02 8338 3800
Freecall: 1800 225 123
Fax: (61) 02 8338 3855
Freefax: 1800 626 017
SDS author: regulatory_affairs@promega.com
Emergency telephone number:
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA
and Canada: 1-800-424-9300
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
AU
(Contd. on page 2)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 2/6
Printing date 18.10.2012 Revision: 18.10.2012
Trade name: Turn Key Enzyme Substrates
* 2 Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
Label elements
Labelling according to Regulation (EC) No 1272/2008 Void
Hazard pictograms Void
Signal word Void
Hazard statements Void
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Components: Void
* 4 First aid measures
Description of first aid measures
General information: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed None
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture None known
Advice for firefighters No special advice.
Protective equipment: No special measures required.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures Not required.
Environmental precautions: No special measures required.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
(Contd. of page 1)
(Contd. on page 3)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 3/6
Printing date 18.10.2012 Revision: 18.10.2012
Trade name: Turn Key Enzyme Substrates
Reference to other sections
No dangerous substances are released.
See Section 7 for information on safe handling
See Section 13 for disposal information.
* 7 Handling and storage
Handling
Precautions for safe handling No special measures required.
Information about fire - and explosion protection: The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
(Contd. of page 2)
Additional information about design of technical facilities: No further data; see item 7.
Control parameters
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information: The lists valid during the making were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands:
Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Goggles recommended during refilling.
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: Colourless
(Contd. on page 4)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 4/6
Printing date 18.10.2012 Revision: 18.10.2012
Trade name: Turn Key Enzyme Substrates
Odour: Characteristic
Odour threshold: Not determined.
Change in condition
Melting point/Melting range: 0°C (32 °F)
Boiling point/Boiling range: 100°C (212 °F)
Flash point: Not applicable
Flammability (solid, gaseous) Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure: Not determined.
Density: Not determined
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
Water: 99.9 %
Other information No further relevant information available.
* 10 Stability and reactivity
Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
(Contd. of page 3)
AU
(Contd. on page 5)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 5/6
Printing date 18.10.2012 Revision: 18.10.2012
Trade name: Turn Key Enzyme Substrates
11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values relevant for classification: No data available
Primary irritant effect:
on the skin: No irritant effect.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
* 12 Ecological information
Toxicity
Aquatic toxicity: Not harmful to the aquatic environment
Persistence and degradability Not available
Behaviour in environmental systems:
Bioaccumulative potential Not known
Mobility in soil No further relevant information available.
Ecotoxical effects:
Remark: Not available
Additional ecological information:
General notes: Generally not hazardous for water.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
(Contd. of page 4)
Waste treatment methods
Recommendation
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional
handling information and protection of employees.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
UN-Number None
ADR, ADN, IMDG, IATA Void
UN proper shipping name None
ADR, ADN, IMDG, IATA Void
Transport hazard class(es)
ADR, ADN, IMDG, IATA
None
Class Void
Packing group None
(Contd. on page 6)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 6/6
Printing date 18.10.2012 Revision: 18.10.2012
Trade name: Turn Key Enzyme Substrates
ADR, IMDG, IATA Void
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN "Model Regulation": -
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances
7732-18-5 water
National regulations
Waterhazard class: Generally not hazardous for water.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
(Contd. of page 5)
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Department issuing MSDS:
Promega Corporation
Safety Department
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ICAO: International Civil Aviation Organization
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
* Data compared to the previous version altered.
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 1/6
Printing date 18.10.2012 Revision: 16.10.2012
Not classified as hazardous according to criteria of Australian Safety and Compensation Council
* 1 Identification of the substance/mixture and of the company/undertaking
Product identifier
Trade name: 5x Reaction Buffer A
Article number: Turnkey4
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation: Laboratory chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Promega Corporation
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
1-608-274-4330
1-800-356-9526
SDS author: Regulatory.Affairs@promega.com
Manufactured by:
Signal Chem
550-5600Parkwood Way
Richmond, BC V6V 2M2
Canada
Tel: 1-604-232-4600
Further information obtainable from:
Promega Australia
Suite W3A, Level 3, Westside Building
South Sydney Corporate Park
75-85 O'Riordan Street
(P.O. Box 7417)
Alexandria NSW 2015
Australia
Phone: (61) 02 8338 3800
Freecall: 1800 225 123
Fax: (61) 02 8338 3855
Freefax: 1800 626 017
SDS author: regulatory_affairs@promega.com
Emergency telephone number:
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA
and Canada: 1-800-424-9300
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
AU
(Contd. on page 2)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 2/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 5x Reaction Buffer A
* 2 Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
Label elements
Labelling according to Regulation (EC) No 1272/2008 Void
Hazard pictograms Void
Signal word Void
Hazard statements Void
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
* 3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Components:
CAS: 1185-53-1 2-Amino-2-(hydroxymethyl)-1,3-propanediolhydrochloride
Acute Tox. 4, H302; Skin Irrit. 2, H315; H319; STOT SE 3, H335
CAS: 7786-30-3
RTECS: OM2800000
* 4 First aid measures
Magnesium Chloride
H319; Acute Tox. 5, H303
Description of first aid measures
General information: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed None
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture None known
Advice for firefighters No special advice.
Protective equipment: No special measures required.
(Contd. of page 1)
1.0-5.0%

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 3/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 5x Reaction Buffer A
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures Not required.
Environmental precautions: Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections
No dangerous substances are released.
See Section 7 for information on safe handling
See Section 13 for disposal information.
* 7 Handling and storage
Handling
Precautions for safe handling No special measures required.
Information about fire - and explosion protection: The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
(Contd. of page 2)
Additional information about design of technical facilities: No further data; see item 7.
Control parameters
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information: The lists valid during the making were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands:
Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Goggles recommended during refilling.
AU
(Contd. on page 4)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 4/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 5x Reaction Buffer A
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: Colourless
Odour: Characteristic
Odour threshold: Not determined.
Change in condition
Melting point/Melting range: undetermined
Boiling point/Boiling range: 100°C (212 °F)
Flash point: Not applicable
Flammability (solid, gaseous) Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure: Not determined.
Density at 20°C (68 °F): 0.99739 g/cm³ (8.323 lbs/gal)
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
Water: 94.8 %
Solids content: 5.2 %
Other information No further relevant information available.
* 10 Stability and reactivity
(Contd. of page 3)
Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
(Contd. on page 5)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 5/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 5x Reaction Buffer A
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values relevant for classification: No data available
Primary irritant effect:
on the skin: No irritant effect.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
* 12 Ecological information
(Contd. of page 4)
Toxicity
Aquatic toxicity: Not harmful to the aquatic environment
Persistence and degradability Not available
Behaviour in environmental systems:
Bioaccumulative potential Not known
Mobility in soil No further relevant information available.
Ecotoxical effects:
Remark: Not available
Additional ecological information:
General notes:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional
handling information and protection of employees.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
UN-Number None
ADR, ADN, IMDG, IATA Void
UN proper shipping name None
ADR, ADN, IMDG, IATA Void
(Contd. on page 6)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 6/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 5x Reaction Buffer A
Transport hazard class(es)
ADR, ADN, IMDG, IATA
None
Class Void
Packing group None
ADR, IMDG, IATA Void
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN "Model Regulation": -
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances
All ingredients are listed.
National regulations
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
(Contd. of page 5)
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Relevant phrases
H302 Harmful if swallowed.
H303 May be harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Department issuing MSDS:
Promega Corporation
Safety Department
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ICAO: International Civil Aviation Organization
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
* Data compared to the previous version altered.
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 1/6
Printing date 18.10.2012 Revision: 16.10.2012
Not classified as hazardous according to criteria of Australian Safety and Compensation Council
* 1 Identification of the substance/mixture and of the company/undertaking
Product identifier
Trade name: 0.1M DTT
Article number: Turnkey10
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation: Laboratory chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Promega Corporation
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
1-608-274-4330
1-800-356-9526
SDS author: Regulatory.Affairs@promega.com
Manufactured by:
Signal Chem
550-5600Parkwood Way
Richmond, BC V6V 2M2
Canada
Tel: 1-604-232-4600
Further information obtainable from:
Promega Australia
Suite W3A, Level 3, Westside Building
South Sydney Corporate Park
75-85 O'Riordan Street
(P.O. Box 7417)
Alexandria NSW 2015
Australia
Phone: (61) 02 8338 3800
Freecall: 1800 225 123
Fax: (61) 02 8338 3855
Freefax: 1800 626 017
SDS author: regulatory_affairs@promega.com
Emergency telephone number:
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA
and Canada: 1-800-424-9300
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
AU
(Contd. on page 2)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 2/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 0.1M DTT
* 2 Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
Label elements
Labelling according to Regulation (EC) No 1272/2008 Void
Hazard pictograms Void
Signal word Void
Hazard statements Void
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Components:
CAS: 3483-12-3
RTECS: XO8576500
* 4 First aid measures
DL-Dithiothreitol
Acute Tox. 4, H302; Skin Irrit. 2, H315; H319; STOT SE 3, H335
Description of first aid measures
General information: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed None
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture None known
Advice for firefighters No special advice.
Protective equipment: No special measures required.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures Not required.
Environmental precautions: Do not allow to enter sewers/ surface or ground water.
(Contd. of page 1)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 3/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 0.1M DTT
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections
No dangerous substances are released.
See Section 7 for information on safe handling
See Section 13 for disposal information.
* 7 Handling and storage
Handling
Precautions for safe handling No special measures required.
Information about fire - and explosion protection: The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
(Contd. of page 2)
Additional information about design of technical facilities: No further data; see item 7.
Control parameters
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information: The lists valid during the making were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands:
Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Goggles recommended during refilling.
AU
(Contd. on page 4)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 4/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 0.1M DTT
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: Colourless
Odour: Characteristic
Odour threshold: Not determined.
Change in condition
Melting point/Melting range: 0°C (32 °F)
Boiling point/Boiling range: 100°C (212 °F)
Flash point: Not applicable
Flammability (solid, gaseous) Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure: Not determined.
Density: Not determined
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
Water: 98.5 %
Solids content: 1.5 %
Other information No further relevant information available.
* 10 Stability and reactivity
(Contd. of page 3)
Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
(Contd. on page 5)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 5/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 0.1M DTT
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values relevant for classification: No data available
Primary irritant effect:
on the skin: No irritant effect.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
* 12 Ecological information
(Contd. of page 4)
Toxicity
Aquatic toxicity: Not harmful to the aquatic environment
Persistence and degradability Not available
Behaviour in environmental systems:
Bioaccumulative potential Not known
Mobility in soil No further relevant information available.
Ecotoxical effects:
Remark: Not available
Additional ecological information:
General notes:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional
handling information and protection of employees.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
UN-Number None
ADR, ADN, IMDG, IATA Void
UN proper shipping name None
ADR, ADN, IMDG, IATA Void
(Contd. on page 6)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 6/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 0.1M DTT
Transport hazard class(es)
ADR, ADN, IMDG, IATA
None
Class Void
Packing group None
ADR, IMDG, IATA Void
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN "Model Regulation": -
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances
All ingredients are listed.
National regulations
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
(Contd. of page 5)
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Relevant phrases
H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Department issuing MSDS:
Promega Corporation
Safety Department
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ICAO: International Civil Aviation Organization
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
* Data compared to the previous version altered.
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 1/7
Printing date 18.10.2012 Revision: 16.10.2012
Hazardous according to criteria of Australian Safety and Compensation Council
* 1 Identification of the substance/mixture and of the company/undertaking
Product identifier
Trade name: 2.5 M MnCl2
Article number: Turnkey11
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation: Laboratory chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Promega Corporation
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
1-608-274-4330
1-800-356-9526
SDS author: Regulatory.Affairs@promega.com
Manufactured by:
Signal Chem
550-5600Parkwood Way
Richmond, BC V6V 2M2
Canada
Tel: 1-604-232-4600
Further information obtainable from:
Promega Australia
Suite W3A, Level 3, Westside Building
South Sydney Corporate Park
75-85 O'Riordan Street
(P.O. Box 7417)
Alexandria NSW 2015
Australia
Phone: (61) 02 8338 3800
Freecall: 1800 225 123
Fax: (61) 02 8338 3855
Freefax: 1800 626 017
SDS author: regulatory_affairs@promega.com
Emergency telephone number:
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA
and Canada: 1-800-424-9300
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
AU
(Contd. on page 2)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 2/7
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 2.5 M MnCl2
* 2 Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
GHS07
(Contd. of page 1)
Acute Tox. 4 H302 Harmful if swallowed.
Label elements
Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.
Hazard pictograms GHS07
Signal word Warning
Hazard-determining components of labelling:
Manganese (II) Chloride
Hazard statements
H302 Harmful if swallowed.
Precautionary statements
P264 Wash thoroughly after handling.
P270 Do no eat, drink or smoke when using this product.
P301+P312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P330 Rinse mouth.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Components:
CAS: 7773-01-5 Manganese (II) Chloride Acute Tox. 3, H301 25-50%
RTECS: OO 0962500
* 4 First aid measures
Description of first aid measures
General information:
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
after the accident.
Medical supervision for at least 48 hours.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing:
Call for a doctor immediately.
Seek immediate medical advice.
(Contd. on page 3)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 3/7
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 2.5 M MnCl2
Information for doctor:
Most important symptoms and effects, both acute and delayed None
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture None known
Advice for firefighters
No special advice.
In the case of fire, wear respiratory protective equipment and chemical protective suit.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures Wear protective clothing.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling
See Section 13 for disposal information.
* 7 Handling and storage
Handling
Precautions for safe handling
Keep receptacles tightly sealed.
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Information about fire - and explosion protection: The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical facilities: No further data; see item 7.
(Contd. of page 2)
(Contd. on page 4)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 4/7
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 2.5 M MnCl2
(Contd. of page 3)
Control parameters
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information: The lists valid during the making were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Do not eat or drink while working.
Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
self-contained respiratory protective device.
Protection of hands:
Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Goggles recommended during refilling.
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: Colourless
Odour: Characteristic
Odour threshold: Not determined.
Change in condition
Melting point/Melting range: undetermined
Boiling point/Boiling range: 100°C (212 °F)
Flash point: Not applicable
Flammability (solid, gaseous) Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
(Contd. on page 5)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 5/7
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 2.5 M MnCl2
Upper: Not determined.
Vapour pressure: Not determined.
Density at 20°C (68 °F): 1.83538 g/cm³ (15.316 lbs/gal)
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
Water: 68.5 %
Solids content: 42.3 %
Other information No further relevant information available.
* 10 Stability and reactivity
Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values relevant for classification:
7773-01-5 Manganese (II) Chloride
Oral LD50 250 mg/kg (Rat)
Primary irritant effect:
on the skin: No irritant effect.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
* 12 Ecological information
Toxicity
Aquatic toxicity: Harmful to aquatic life
Persistence and degradability Not available
(Contd. of page 4)
(Contd. on page 6)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 6/7
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 2.5 M MnCl2
(Contd. of page 5)
Behaviour in environmental systems:
Bioaccumulative potential Not known
Mobility in soil No further relevant information available.
Ecotoxical effects:
Remark: Harmful to fish
Additional ecological information:
General notes:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Harmful to aquatic organisms
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional
handling information and protection of employees.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
UN-Number None
ADR, ADN, IMDG, IATA Void
UN proper shipping name None
ADR, ADN, IMDG, IATA Void
Transport hazard class(es)
ADR, ADN, IMDG, IATA
None
Class Void
Packing group None
ADR, IMDG, IATA Void
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN "Model Regulation": -
AU
(Contd. on page 7)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 7/7
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: 2.5 M MnCl2
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances
All ingredients are listed.
National regulations
Class Share in %
Wasser 68.5
III 31.5
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
(Contd. of page 6)
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Relevant phrases
H301 Toxic if swallowed.
Department issuing MSDS:
Promega Corporation
Safety Department
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ICAO: International Civil Aviation Organization
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
* Data compared to the previous version altered.
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 1/6
Printing date 18.10.2012 Revision: 16.10.2012
Not classified as hazardous according to criteria of Australian Safety and Compensation Council
* 1 Identification of the substance/mixture and of the company/undertaking
Product identifier
Trade name: ADP-Glo Reagent
Article number: V912
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation: Laboratory chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Promega Corporation
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
1-608-274-4330
1-800-356-9526
SDS author: Regulatory.Affairs@promega.com
Further information obtainable from:
Promega Australia
Suite W3A, Level 3, Westside Building
South Sydney Corporate Park
75-85 O'Riordan Street
(P.O. Box 7417)
Alexandria NSW 2015
Australia
Phone: (61) 02 8338 3800
Freecall: 1800 225 123
Fax: (61) 02 8338 3855
Freefax: 1800 626 017
SDS author: regulatory_affairs@promega.com
Emergency telephone number:
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA
and Canada: 1-800-424-9300
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
* 2 Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
Label elements
Labelling according to Regulation (EC) No 1272/2008 Void
(Contd. on page 2)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 2/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP-Glo Reagent
Hazard pictograms Void
Signal word Void
Hazard statements Void
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Components: Void
* 4 First aid measures
Description of first aid measures
General information: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed None
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture None known
Advice for firefighters No special advice.
Protective equipment: No special measures required.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures Not required.
Environmental precautions: No special measures required.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections
No dangerous substances are released.
See Section 7 for information on safe handling
See Section 13 for disposal information.
(Contd. of page 1)
AU
(Contd. on page 3)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 3/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP-Glo Reagent
* 7 Handling and storage
Handling
Precautions for safe handling No special measures required.
Information about fire - and explosion protection: The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
(Contd. of page 2)
Additional information about design of technical facilities: No further data; see item 7.
Control parameters
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information: The lists valid during the making were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands:
Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Goggles recommended during refilling.
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: Colourless
Odour: Characteristic
Odour threshold: Not determined.
pH-value at 20°C (68 °F): 7.5
(Contd. on page 4)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 4/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP-Glo Reagent
Change in condition
Melting point/Melting range: 0°C (32 °F)
Boiling point/Boiling range: undetermined
Flash point: Not applicable
Flammability (solid, gaseous) Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure: Not determined.
Density: Not determined
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.
Solvent content:
Organic solvents: 0.7 %
Water: 99.0 %
Other information No further relevant information available.
* 10 Stability and reactivity
Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values relevant for classification: No data available
(Contd. of page 3)
(Contd. on page 5)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 5/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP-Glo Reagent
Primary irritant effect:
on the skin: No irritant effect.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
* 12 Ecological information
Toxicity
Aquatic toxicity: Not harmful to the aquatic environment
Persistence and degradability Not available
Behaviour in environmental systems:
Bioaccumulative potential Not known
Mobility in soil No further relevant information available.
Ecotoxical effects:
Remark: Not available
Additional ecological information:
General notes: Generally not hazardous for water.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
(Contd. of page 4)
Waste treatment methods
Recommendation
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional
handling information and protection of employees.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
UN-Number None
ADR, ADN, IMDG, IATA Void
UN proper shipping name None
ADR, ADN, IMDG, IATA Void
Transport hazard class(es)
ADR, ADN, IMDG, IATA
None
Class Void
Packing group None
ADR, IMDG, IATA Void
Environmental hazards:
Marine pollutant: No
(Contd. on page 6)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 6/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP-Glo Reagent
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN "Model Regulation": -
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances
56-81-5 glycerol
77-86-1 2-Amino-2-(hydroxymethyl)-1,3-propanediol
1185-53-1 2-Amino-2-(hydroxymethyl)-1,3-propanediolhydrochloride
68410-45-7 Gelatins, hydrolyzates
7647-14-5 sodium chloride
7778-77-0 potassium phosphate monobasic
3483-12-3 DL-Dithiothreitol
9002-93-1 Polyethylene glycol tert-octylphenyl ether
7732-18-5 water
National regulations
Class Share in %
Wasser 99.0
NK 0.7
Waterhazard class: Generally not hazardous for water.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
(Contd. of page 5)
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Department issuing MSDS:
Promega Corporation
Safety Department
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ICAO: International Civil Aviation Organization
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
* Data compared to the previous version altered.
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 1/6
Printing date 18.10.2012 Revision: 16.10.2012
Not classified as hazardous according to criteria of Australian Safety and Compensation Council
* 1 Identification of the substance/mixture and of the company/undertaking
Product identifier
Trade name: Kinase Detection Buffer
Article number: V913
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation: Laboratory chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Promega Corporation
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
1-608-274-4330
1-800-356-9526
SDS author: Regulatory.Affairs@promega.com
Further information obtainable from:
Promega Australia
Suite W3A, Level 3, Westside Building
South Sydney Corporate Park
75-85 O'Riordan Street
(P.O. Box 7417)
Alexandria NSW 2015
Australia
Phone: (61) 02 8338 3800
Freecall: 1800 225 123
Fax: (61) 02 8338 3855
Freefax: 1800 626 017
SDS author: regulatory_affairs@promega.com
Emergency telephone number:
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA
and Canada: 1-800-424-9300
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
* 2 Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
Label elements
Labelling according to Regulation (EC) No 1272/2008 Void
(Contd. on page 2)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 2/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Buffer
Hazard pictograms Void
Signal word Void
Hazard statements Void
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Components:
7758-11-4 dipotassium hydrogenorthophosphate
Eye Dam. 1, H318
9002-92-0 Polyethylene glycol 400 dodecyl ether
Skin Irrit. 2, H315; H319; STOT SE 3, H335; Acute Tox. 5, H303
1119-94-4 Dodecyltrimethylammonium bromide
Skin Irrit. 2, H315; H319; STOT SE 3, H335
* 4 First aid measures
Description of first aid measures
General information: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed None
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture None known
Advice for firefighters No special advice.
Protective equipment: No special measures required.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures Not required.
Environmental precautions: Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
(Contd. of page 1)
1.0-5.0%

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 3/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Buffer
Reference to other sections
No dangerous substances are released.
See Section 7 for information on safe handling
See Section 13 for disposal information.
* 7 Handling and storage
Handling
Precautions for safe handling No special measures required.
Information about fire - and explosion protection: The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
(Contd. of page 2)
Additional information about design of technical facilities: No further data; see item 7.
Control parameters
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information: The lists valid during the making were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands:
Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Goggles recommended during refilling.
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: Colourless
(Contd. on page 4)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 4/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Buffer
Odour: Characteristic
Odour threshold: Not determined.
Change in condition
Melting point/Melting range: undetermined
Boiling point/Boiling range: undetermined
Flash point: Not applicable
Flammability (solid, gaseous) Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure: Not determined.
Density: Not determined
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
Water: 88.6 %
Other information No further relevant information available.
* 10 Stability and reactivity
Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
(Contd. of page 3)
AU
(Contd. on page 5)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 5/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Buffer
11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values relevant for classification: No data available
Primary irritant effect:
on the skin: No irritant effect.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
* 12 Ecological information
(Contd. of page 4)
Toxicity
Aquatic toxicity: Not harmful to the aquatic environment
Persistence and degradability Not available
Behaviour in environmental systems:
Bioaccumulative potential Not known
Mobility in soil No further relevant information available.
Ecotoxical effects:
Remark: Not available
Additional ecological information:
General notes:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional
handling information and protection of employees.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
UN-Number None
UN proper shipping name None
Transport hazard class(es) None
Packing group None
Environmental hazards:
Marine pollutant: No
(Contd. on page 6)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 6/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Buffer
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances
7778-77-0 potassium phosphate monobasic
7758-11-4 dipotassium hydrogenorthophosphate
9002-92-0 Polyethylene glycol 400 dodecyl ether
68-04-2 Sodium Citrate
1119-94-4 Dodecyltrimethylammonium bromide
4578-31-8 Adenosine 5′-monophosphate disodium salt
7487-88-9 Sulfuric acid magnesium salt (1:1)
7681-49-4 sodium fluoride
139-33-3 disodium dihydrogenethylenediaminetetraacetate
7365-45-9 4-(2-hydroxyethyl)piperazin-1-ylethanesulphonic acid
7732-18-5 water
National regulations
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
(Contd. of page 5)
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Relevant phrases
H303 May be harmful if swallowed.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Department issuing MSDS:
Promega Corporation
Safety Department
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
* Data compared to the previous version altered.
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 1/6
Printing date 18.10.2012 Revision: 16.10.2012
Not classified as hazardous according to criteria of Australian Safety and Compensation Council
* 1 Identification of the substance/mixture and of the company/undertaking
Product identifier
Trade name: Kinase Detection Substrate
Article number: V914
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation: Laboratory chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Promega Corporation
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
1-608-274-4330
1-800-356-9526
SDS author: Regulatory.Affairs@promega.com
Further information obtainable from:
Promega Australia
Suite W3A, Level 3, Westside Building
South Sydney Corporate Park
75-85 O'Riordan Street
(P.O. Box 7417)
Alexandria NSW 2015
Australia
Phone: (61) 02 8338 3800
Freecall: 1800 225 123
Fax: (61) 02 8338 3855
Freefax: 1800 626 017
SDS author: regulatory_affairs@promega.com
Emergency telephone number:
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA
and Canada: 1-800-424-9300
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
* 2 Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
Label elements
Labelling according to Regulation (EC) No 1272/2008 Void
(Contd. on page 2)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 2/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Substrate
Hazard pictograms Void
Signal word Void
Hazard statements Void
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Components: Void
* 4 First aid measures
Description of first aid measures
General information: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed None
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture None known
Advice for firefighters No special advice.
Protective equipment: No special measures required.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures Not required.
Environmental precautions: Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections
No dangerous substances are released.
See Section 7 for information on safe handling
See Section 13 for disposal information.
(Contd. of page 1)
AU
(Contd. on page 3)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 3/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Substrate
* 7 Handling and storage
Handling
Precautions for safe handling No special measures required.
Information about fire - and explosion protection: The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
(Contd. of page 2)
Additional information about design of technical facilities: No further data; see item 7.
Control parameters
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information: The lists valid during the making were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands:
Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Goggles recommended during refilling.
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: Colourless
Odour: Characteristic
Odour threshold: Not determined.
pH-value at 20°C (68 °F): 6
(Contd. on page 4)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 4/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Substrate
Change in condition
Melting point/Melting range: 0°C (32 °F)
Boiling point/Boiling range: undetermined
Flash point: Not applicable
Flammability (solid, gaseous) Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure: Not determined.
Density at 20°C (68 °F): 1.014 g/cm³ (8.462 lbs/gal)
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
Water: 95.5 %
Other information No further relevant information available.
* 10 Stability and reactivity
Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values relevant for classification: No data available
(Contd. of page 3)
(Contd. on page 5)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 5/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Substrate
Primary irritant effect:
on the skin: No irritant effect.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
* 12 Ecological information
(Contd. of page 4)
Toxicity
Aquatic toxicity: Not harmful to the aquatic environment
Persistence and degradability Not available
Behaviour in environmental systems:
Bioaccumulative potential Not known
Mobility in soil No further relevant information available.
Ecotoxical effects:
Remark: Not available
Additional ecological information:
General notes:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional
handling information and protection of employees.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
UN-Number None
UN proper shipping name None
Transport hazard class(es) None
Packing group None
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
(Contd. on page 6)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 6/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Kinase Detection Substrate
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances
68410-45-7 Gelatins, hydrolyzates
68-04-2 Sodium Citrate
7365-45-9 4-(2-hydroxyethyl)piperazin-1-ylethanesulphonic acid
7647-14-5 sodium chloride
7487-88-9 Sulfuric acid magnesium salt (1:1)
139-33-3 disodium dihydrogenethylenediaminetetraacetate
9001-59-6 Kinase (phosphorylating), pyruvate
77-92-9 Citric Acid
7732-18-5 water
National regulations
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
(Contd. of page 5)
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Department issuing MSDS:
Promega Corporation
Safety Department
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
* Data compared to the previous version altered.
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 1/6
Printing date 18.10.2012 Revision: 16.10.2012
Not classified as hazardous according to criteria of Australian Safety and Compensation Council
* 1 Identification of the substance/mixture and of the company/undertaking
Product identifier
Trade name: Ultra Pure ATP, 10mM
Article number: V915
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation: Laboratory chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Promega Corporation
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
1-608-274-4330
1-800-356-9526
SDS author: Regulatory.Affairs@promega.com
Further information obtainable from:
Promega Australia
Suite W3A, Level 3, Westside Building
South Sydney Corporate Park
75-85 O'Riordan Street
(P.O. Box 7417)
Alexandria NSW 2015
Australia
Phone: (61) 02 8338 3800
Freecall: 1800 225 123
Fax: (61) 02 8338 3855
Freefax: 1800 626 017
SDS author: regulatory_affairs@promega.com
Emergency telephone number:
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA
and Canada: 1-800-424-9300
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
* 2 Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
Label elements
Labelling according to Regulation (EC) No 1272/2008 Void
(Contd. on page 2)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 2/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Ultra Pure ATP, 10mM
Hazard pictograms Void
Signal word Void
Hazard statements Void
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Components: Void
* 4 First aid measures
Description of first aid measures
General information: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed None
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture None known
Advice for firefighters No special advice.
Protective equipment: No special measures required.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures Not required.
Environmental precautions: No special measures required.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections
No dangerous substances are released.
See Section 7 for information on safe handling
See Section 13 for disposal information.
(Contd. of page 1)
AU
(Contd. on page 3)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 3/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Ultra Pure ATP, 10mM
* 7 Handling and storage
Handling
Precautions for safe handling No special measures required.
Information about fire - and explosion protection: The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
(Contd. of page 2)
Additional information about design of technical facilities: No further data; see item 7.
Control parameters
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information: The lists valid during the making were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands:
Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Goggles recommended during refilling.
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: Colourless
Odour: Characteristic
Odour threshold: Not determined.
Change in condition
Melting point/Melting range: 0°C (32 °F)
(Contd. on page 4)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 4/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Ultra Pure ATP, 10mM
Boiling point/Boiling range: undetermined
Flash point: Not applicable
Flammability (solid, gaseous) Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure: Not determined.
Density: Not determined
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
Water: 99.4 %
Other information No further relevant information available.
* 10 Stability and reactivity
Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values relevant for classification: No data available
Primary irritant effect:
on the skin: No irritant effect.
on the eye: Irritating effect.
(Contd. of page 3)
(Contd. on page 5)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 5/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Ultra Pure ATP, 10mM
Sensitization: No sensitizing effects known.
* 12 Ecological information
Toxicity
Aquatic toxicity: Not harmful to the aquatic environment
Persistence and degradability Not available
Behaviour in environmental systems:
Bioaccumulative potential Not known
Mobility in soil No further relevant information available.
Ecotoxical effects:
Remark: Not available
Additional ecological information:
General notes: Generally not hazardous for water.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
(Contd. of page 4)
Waste treatment methods
Recommendation
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional
handling information and protection of employees.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
UN-Number None
UN proper shipping name None
Transport hazard class(es) None
Packing group None
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
AU
(Contd. on page 6)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 6/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: Ultra Pure ATP, 10mM
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances
All ingredients are listed.
National regulations
Waterhazard class: Generally not hazardous for water.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
(Contd. of page 5)
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Department issuing MSDS:
Promega Corporation
Safety Department
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
* Data compared to the previous version altered.
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 1/6
Printing date 18.10.2012 Revision: 16.10.2012
Not classified as hazardous according to criteria of Australian Safety and Compensation Council
* 1 Identification of the substance/mixture and of the company/undertaking
Product identifier
Trade name: ADP, 10mM
Article number: V916
Relevant identified uses of the substance or mixture and uses advised against
Application of the substance / the preparation: Laboratory chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Promega Corporation
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
1-608-274-4330
1-800-356-9526
SDS author: Regulatory.Affairs@promega.com
Further information obtainable from:
Promega Australia
Suite W3A, Level 3, Westside Building
South Sydney Corporate Park
75-85 O'Riordan Street
(P.O. Box 7417)
Alexandria NSW 2015
Australia
Phone: (61) 02 8338 3800
Freecall: 1800 225 123
Fax: (61) 02 8338 3855
Freefax: 1800 626 017
SDS author: regulatory_affairs@promega.com
Emergency telephone number:
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA
and Canada: 1-800-424-9300
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)
* 2 Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
Label elements
Labelling according to Regulation (EC) No 1272/2008 Void
(Contd. on page 2)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 2/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP, 10mM
Hazard pictograms Void
Signal word Void
Hazard statements Void
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Components: Void
* 4 First aid measures
Description of first aid measures
General information: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed None
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Firefighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture None known
Advice for firefighters No special advice.
Protective equipment: No special measures required.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures Not required.
Environmental precautions: No special measures required.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections
No dangerous substances are released.
See Section 7 for information on safe handling
See Section 13 for disposal information.
(Contd. of page 1)
AU
(Contd. on page 3)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 3/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP, 10mM
* 7 Handling and storage
Handling
Precautions for safe handling No special measures required.
Information about fire - and explosion protection: The product is not flammable
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
(Contd. of page 2)
Additional information about design of technical facilities: No further data; see item 7.
Control parameters
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information: The lists valid during the making were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands:
Protective gloves.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection: Goggles recommended during refilling.
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Colour: Colourless
Odour: Characteristic
Odour threshold: Not determined.
pH-value at 20°C (68 °F): 7.5
(Contd. on page 4)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 4/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP, 10mM
Change in condition
Melting point/Melting range: 0°C (32 °F)
Boiling point/Boiling range: undetermined
Flash point: Not applicable
Flammability (solid, gaseous) Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Self-igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapour pressure: Not determined.
Density: Not determined
Relative density Not determined.
Vapour density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
dynamic: Not determined.
kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
Water: 99.6 %
Other information No further relevant information available.
* 10 Stability and reactivity
Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values relevant for classification: No data available
(Contd. of page 3)
(Contd. on page 5)
AU

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 5/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP, 10mM
Primary irritant effect:
on the skin: No irritant effect.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
* 12 Ecological information
Toxicity
Aquatic toxicity: Not harmful to the aquatic environment
Persistence and degradability Not available
Behaviour in environmental systems:
Bioaccumulative potential Not known
Mobility in soil No further relevant information available.
Ecotoxical effects:
Remark: Not available
Additional ecological information:
General notes: Generally not hazardous for water.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
(Contd. of page 4)
Waste treatment methods
Recommendation
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional
handling information and protection of employees.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
UN-Number None
UN proper shipping name None
Transport hazard class(es) None
Packing group None
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
AU
(Contd. on page 6)

35.0.2
Safety data sheet
according to 1907/2006/EC, Article 31
Page 6/6
Printing date 18.10.2012 Revision: 16.10.2012
Trade name: ADP, 10mM
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances
All ingredients are listed.
National regulations
Waterhazard class: Generally not hazardous for water.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
(Contd. of page 5)
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Department issuing MSDS:
Promega Corporation
Safety Department
2800 Woods Hollow Road
Madison, WI 53711
U.S.A.
Abbreviations and acronyms:
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the
International Transport of Dangerous Goods by Rail)
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
* Data compared to the previous version altered.
AU