MSDS - Promega
MSDS - Promega
MSDS - Promega
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10/18/2012<br />
Product code Description<br />
Kit components<br />
V4055 ADP-Glo Kinase Assay + BRK Kinase<br />
Enzyme System<br />
Components:<br />
V4054 BRK Kinase Enzyme System<br />
V9101 ADP-Glo Kinase Assay, 1000 Assays
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 1/6<br />
Printing date 18.10.2012 Revision: 18.10.2012<br />
Not classified as hazardous according to criteria of Australian Safety and Compensation Council<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
Product identifier<br />
Trade name: Turn Key Enzyme Substrates<br />
Article number: Turnkey16<br />
Relevant identified uses of the substance or mixture and uses advised against<br />
Application of the substance / the preparation: Laboratory chemicals<br />
Details of the supplier of the safety data sheet<br />
Manufacturer/Supplier:<br />
<strong>Promega</strong> Corporation<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
1-608-274-4330<br />
1-800-356-9526<br />
SDS author: Regulatory.Affairs@promega.com<br />
Manufactured by:<br />
Signal Chem<br />
550-5600Parkwood Way<br />
Richmond, BC V6V 2M2<br />
Canada<br />
Tel: 1-604-232-4600<br />
Further information obtainable from:<br />
<strong>Promega</strong> Australia<br />
Suite W3A, Level 3, Westside Building<br />
South Sydney Corporate Park<br />
75-85 O'Riordan Street<br />
(P.O. Box 7417)<br />
Alexandria NSW 2015<br />
Australia<br />
Phone: (61) 02 8338 3800<br />
Freecall: 1800 225 123<br />
Fax: (61) 02 8338 3855<br />
Freefax: 1800 626 017<br />
SDS author: regulatory_affairs@promega.com<br />
Emergency telephone number:<br />
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA<br />
and Canada: 1-800-424-9300<br />
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)<br />
AU<br />
(Contd. on page 2)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 2/6<br />
Printing date 18.10.2012 Revision: 18.10.2012<br />
Trade name: Turn Key Enzyme Substrates<br />
* 2 Hazards identification<br />
Classification of the substance or mixture<br />
Classification according to Regulation (EC) No 1272/2008<br />
The product is not classified according to the CLP regulation.<br />
Label elements<br />
Labelling according to Regulation (EC) No 1272/2008 Void<br />
Hazard pictograms Void<br />
Signal word Void<br />
Hazard statements Void<br />
Other hazards<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
3 Composition/information on ingredients<br />
Chemical characterization: Mixtures<br />
Description: Mixture of substances listed below with nonhazardous additions.<br />
Components: Void<br />
* 4 First aid measures<br />
Description of first aid measures<br />
General information: No special measures required.<br />
After inhalation: Supply fresh air; consult doctor in case of complaints.<br />
After skin contact: Generally the product does not irritate the skin.<br />
After eye contact: Rinse opened eye for several minutes under running water.<br />
After swallowing: If symptoms persist consult doctor.<br />
Information for doctor:<br />
Most important symptoms and effects, both acute and delayed None<br />
Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
* 5 Firefighting measures<br />
Extinguishing media<br />
Suitable extinguishing agents:<br />
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.<br />
Special hazards arising from the substance or mixture None known<br />
Advice for firefighters No special advice.<br />
Protective equipment: No special measures required.<br />
* 6 Accidental release measures<br />
Personal precautions, protective equipment and emergency procedures Not required.<br />
Environmental precautions: No special measures required.<br />
Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
(Contd. of page 1)<br />
(Contd. on page 3)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 3/6<br />
Printing date 18.10.2012 Revision: 18.10.2012<br />
Trade name: Turn Key Enzyme Substrates<br />
Reference to other sections<br />
No dangerous substances are released.<br />
See Section 7 for information on safe handling<br />
See Section 13 for disposal information.<br />
* 7 Handling and storage<br />
Handling<br />
Precautions for safe handling No special measures required.<br />
Information about fire - and explosion protection: The product is not flammable<br />
Conditions for safe storage, including any incompatibilities<br />
Storage<br />
Requirements to be met by storerooms and receptacles: No special requirements.<br />
Information about storage in one common storage facility: Not required.<br />
Further information about storage conditions: None.<br />
Specific end use(s) No further relevant information available.<br />
8 Exposure controls/personal protection<br />
(Contd. of page 2)<br />
Additional information about design of technical facilities: No further data; see item 7.<br />
Control parameters<br />
Ingredients with limit values that require monitoring at the workplace:<br />
The product does not contain any relevant quantities of materials with critical values that have to be monitored at<br />
the workplace.<br />
Additional information: The lists valid during the making were used as basis.<br />
Exposure controls<br />
Personal protective equipment<br />
General protective and hygienic measures<br />
The usual precautionary measures are to be adhered to when handling chemicals.<br />
Respiratory protection: Not required.<br />
Protection of hands:<br />
Protective gloves.<br />
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation<br />
Material of gloves:<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and<br />
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance<br />
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.<br />
Penetration time of glove material:<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
Eye protection: Goggles recommended during refilling.<br />
* 9 Physical and chemical properties<br />
Information on basic physical and chemical properties<br />
General Information<br />
Appearance:<br />
Form: Fluid<br />
Colour: Colourless<br />
(Contd. on page 4)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 4/6<br />
Printing date 18.10.2012 Revision: 18.10.2012<br />
Trade name: Turn Key Enzyme Substrates<br />
Odour: Characteristic<br />
Odour threshold: Not determined.<br />
Change in condition<br />
Melting point/Melting range: 0°C (32 °F)<br />
Boiling point/Boiling range: 100°C (212 °F)<br />
Flash point: Not applicable<br />
Flammability (solid, gaseous) Not applicable.<br />
Ignition temperature:<br />
Decomposition temperature: Not determined.<br />
Self-igniting: Product is not selfigniting.<br />
Danger of explosion: Product does not present an explosion hazard.<br />
Explosion limits:<br />
Lower: Not determined.<br />
Upper: Not determined.<br />
Vapour pressure: Not determined.<br />
Density: Not determined<br />
Relative density Not determined.<br />
Vapour density Not determined.<br />
Evaporation rate Not determined.<br />
Solubility in / Miscibility with<br />
Water: Not miscible or difficult to mix<br />
Partition coefficient (n-octanol/water): Not determined.<br />
Viscosity:<br />
dynamic: Not determined.<br />
kinematic: Not determined.<br />
Solvent content:<br />
Organic solvents: 0.0 %<br />
Water: 99.9 %<br />
Other information No further relevant information available.<br />
* 10 Stability and reactivity<br />
Reactivity<br />
Chemical stability<br />
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
Possibility of hazardous reactions No dangerous reactions known<br />
Conditions to avoid No further relevant information available.<br />
Incompatible materials: No further relevant information available.<br />
Hazardous decomposition products: No dangerous decomposition products known<br />
(Contd. of page 3)<br />
AU<br />
(Contd. on page 5)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 5/6<br />
Printing date 18.10.2012 Revision: 18.10.2012<br />
Trade name: Turn Key Enzyme Substrates<br />
11 Toxicological information<br />
Information on toxicological effects<br />
Acute toxicity:<br />
LD/LC50 values relevant for classification: No data available<br />
Primary irritant effect:<br />
on the skin: No irritant effect.<br />
on the eye: Irritating effect.<br />
Sensitization: No sensitizing effects known.<br />
* 12 Ecological information<br />
Toxicity<br />
Aquatic toxicity: Not harmful to the aquatic environment<br />
Persistence and degradability Not available<br />
Behaviour in environmental systems:<br />
Bioaccumulative potential Not known<br />
Mobility in soil No further relevant information available.<br />
Ecotoxical effects:<br />
Remark: Not available<br />
Additional ecological information:<br />
General notes: Generally not hazardous for water.<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
(Contd. of page 4)<br />
Waste treatment methods<br />
Recommendation<br />
Disposal should be in accordance with applicable regional, national and local laws and regulations.<br />
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional<br />
handling information and protection of employees.<br />
Uncleaned packaging:<br />
Recommendation: Disposal must be made according to official regulations.<br />
* 14 Transport information<br />
UN-Number None<br />
ADR, ADN, IMDG, IATA Void<br />
UN proper shipping name None<br />
ADR, ADN, IMDG, IATA Void<br />
Transport hazard class(es)<br />
ADR, ADN, IMDG, IATA<br />
None<br />
Class Void<br />
Packing group None<br />
(Contd. on page 6)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 6/6<br />
Printing date 18.10.2012 Revision: 18.10.2012<br />
Trade name: Turn Key Enzyme Substrates<br />
ADR, IMDG, IATA Void<br />
Environmental hazards:<br />
Marine pollutant: No<br />
Special precautions for user Not applicable.<br />
Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code Not applicable.<br />
UN "Model Regulation": -<br />
15 Regulatory information<br />
Safety, health and environmental regulations/legislation specific for the substance or mixture<br />
Australian Inventory of Chemical Substances<br />
7732-18-5 water<br />
National regulations<br />
Waterhazard class: Generally not hazardous for water.<br />
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.<br />
16 Other information<br />
(Contd. of page 5)<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
Department issuing <strong>MSDS</strong>:<br />
<strong>Promega</strong> Corporation<br />
Safety Department<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
Abbreviations and acronyms:<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
ICAO: International Civil Aviation Organization<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
IMDG: International Maritime Code for Dangerous Goods<br />
IATA: International Air Transport Association<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
* Data compared to the previous version altered.<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 1/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Not classified as hazardous according to criteria of Australian Safety and Compensation Council<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
Product identifier<br />
Trade name: 5x Reaction Buffer A<br />
Article number: Turnkey4<br />
Relevant identified uses of the substance or mixture and uses advised against<br />
Application of the substance / the preparation: Laboratory chemicals<br />
Details of the supplier of the safety data sheet<br />
Manufacturer/Supplier:<br />
<strong>Promega</strong> Corporation<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
1-608-274-4330<br />
1-800-356-9526<br />
SDS author: Regulatory.Affairs@promega.com<br />
Manufactured by:<br />
Signal Chem<br />
550-5600Parkwood Way<br />
Richmond, BC V6V 2M2<br />
Canada<br />
Tel: 1-604-232-4600<br />
Further information obtainable from:<br />
<strong>Promega</strong> Australia<br />
Suite W3A, Level 3, Westside Building<br />
South Sydney Corporate Park<br />
75-85 O'Riordan Street<br />
(P.O. Box 7417)<br />
Alexandria NSW 2015<br />
Australia<br />
Phone: (61) 02 8338 3800<br />
Freecall: 1800 225 123<br />
Fax: (61) 02 8338 3855<br />
Freefax: 1800 626 017<br />
SDS author: regulatory_affairs@promega.com<br />
Emergency telephone number:<br />
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA<br />
and Canada: 1-800-424-9300<br />
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)<br />
AU<br />
(Contd. on page 2)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 2/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 5x Reaction Buffer A<br />
* 2 Hazards identification<br />
Classification of the substance or mixture<br />
Classification according to Regulation (EC) No 1272/2008<br />
The product is not classified according to the CLP regulation.<br />
Label elements<br />
Labelling according to Regulation (EC) No 1272/2008 Void<br />
Hazard pictograms Void<br />
Signal word Void<br />
Hazard statements Void<br />
Other hazards<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
* 3 Composition/information on ingredients<br />
Chemical characterization: Mixtures<br />
Description: Mixture of substances listed below with nonhazardous additions.<br />
Components:<br />
CAS: 1185-53-1 2-Amino-2-(hydroxymethyl)-1,3-propanediolhydrochloride<br />
Acute Tox. 4, H302; Skin Irrit. 2, H315; H319; STOT SE 3, H335<br />
CAS: 7786-30-3<br />
RTECS: OM2800000<br />
* 4 First aid measures<br />
Magnesium Chloride<br />
H319; Acute Tox. 5, H303<br />
Description of first aid measures<br />
General information: No special measures required.<br />
After inhalation: Supply fresh air; consult doctor in case of complaints.<br />
After skin contact: Generally the product does not irritate the skin.<br />
After eye contact: Rinse opened eye for several minutes under running water.<br />
After swallowing: If symptoms persist consult doctor.<br />
Information for doctor:<br />
Most important symptoms and effects, both acute and delayed None<br />
Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
* 5 Firefighting measures<br />
Extinguishing media<br />
Suitable extinguishing agents:<br />
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.<br />
Special hazards arising from the substance or mixture None known<br />
Advice for firefighters No special advice.<br />
Protective equipment: No special measures required.<br />
(Contd. of page 1)<br />
1.0-5.0%<br />
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 3/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 5x Reaction Buffer A<br />
* 6 Accidental release measures<br />
Personal precautions, protective equipment and emergency procedures Not required.<br />
Environmental precautions: Do not allow to enter sewers/ surface or ground water.<br />
Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
Reference to other sections<br />
No dangerous substances are released.<br />
See Section 7 for information on safe handling<br />
See Section 13 for disposal information.<br />
* 7 Handling and storage<br />
Handling<br />
Precautions for safe handling No special measures required.<br />
Information about fire - and explosion protection: The product is not flammable<br />
Conditions for safe storage, including any incompatibilities<br />
Storage<br />
Requirements to be met by storerooms and receptacles: No special requirements.<br />
Information about storage in one common storage facility: Not required.<br />
Further information about storage conditions: None.<br />
Specific end use(s) No further relevant information available.<br />
8 Exposure controls/personal protection<br />
(Contd. of page 2)<br />
Additional information about design of technical facilities: No further data; see item 7.<br />
Control parameters<br />
Ingredients with limit values that require monitoring at the workplace:<br />
The product does not contain any relevant quantities of materials with critical values that have to be monitored at<br />
the workplace.<br />
Additional information: The lists valid during the making were used as basis.<br />
Exposure controls<br />
Personal protective equipment<br />
General protective and hygienic measures<br />
The usual precautionary measures are to be adhered to when handling chemicals.<br />
Respiratory protection: Not required.<br />
Protection of hands:<br />
Protective gloves.<br />
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation<br />
Material of gloves:<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and<br />
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance<br />
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.<br />
Penetration time of glove material:<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
Eye protection: Goggles recommended during refilling.<br />
AU<br />
(Contd. on page 4)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 4/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 5x Reaction Buffer A<br />
* 9 Physical and chemical properties<br />
Information on basic physical and chemical properties<br />
General Information<br />
Appearance:<br />
Form: Fluid<br />
Colour: Colourless<br />
Odour: Characteristic<br />
Odour threshold: Not determined.<br />
Change in condition<br />
Melting point/Melting range: undetermined<br />
Boiling point/Boiling range: 100°C (212 °F)<br />
Flash point: Not applicable<br />
Flammability (solid, gaseous) Not applicable.<br />
Ignition temperature:<br />
Decomposition temperature: Not determined.<br />
Self-igniting: Product is not selfigniting.<br />
Danger of explosion: Product does not present an explosion hazard.<br />
Explosion limits:<br />
Lower: Not determined.<br />
Upper: Not determined.<br />
Vapour pressure: Not determined.<br />
Density at 20°C (68 °F): 0.99739 g/cm³ (8.323 lbs/gal)<br />
Relative density Not determined.<br />
Vapour density Not determined.<br />
Evaporation rate Not determined.<br />
Solubility in / Miscibility with<br />
Water: Not miscible or difficult to mix<br />
Partition coefficient (n-octanol/water): Not determined.<br />
Viscosity:<br />
dynamic: Not determined.<br />
kinematic: Not determined.<br />
Solvent content:<br />
Organic solvents: 0.0 %<br />
Water: 94.8 %<br />
Solids content: 5.2 %<br />
Other information No further relevant information available.<br />
* 10 Stability and reactivity<br />
(Contd. of page 3)<br />
Reactivity<br />
Chemical stability<br />
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
Possibility of hazardous reactions No dangerous reactions known<br />
Conditions to avoid No further relevant information available.<br />
(Contd. on page 5)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 5/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 5x Reaction Buffer A<br />
Incompatible materials: No further relevant information available.<br />
Hazardous decomposition products: No dangerous decomposition products known<br />
11 Toxicological information<br />
Information on toxicological effects<br />
Acute toxicity:<br />
LD/LC50 values relevant for classification: No data available<br />
Primary irritant effect:<br />
on the skin: No irritant effect.<br />
on the eye: Irritating effect.<br />
Sensitization: No sensitizing effects known.<br />
* 12 Ecological information<br />
(Contd. of page 4)<br />
Toxicity<br />
Aquatic toxicity: Not harmful to the aquatic environment<br />
Persistence and degradability Not available<br />
Behaviour in environmental systems:<br />
Bioaccumulative potential Not known<br />
Mobility in soil No further relevant information available.<br />
Ecotoxical effects:<br />
Remark: Not available<br />
Additional ecological information:<br />
General notes:<br />
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.<br />
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
Waste treatment methods<br />
Recommendation<br />
Disposal should be in accordance with applicable regional, national and local laws and regulations.<br />
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional<br />
handling information and protection of employees.<br />
Uncleaned packaging:<br />
Recommendation: Disposal must be made according to official regulations.<br />
* 14 Transport information<br />
UN-Number None<br />
ADR, ADN, IMDG, IATA Void<br />
UN proper shipping name None<br />
ADR, ADN, IMDG, IATA Void<br />
(Contd. on page 6)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 6/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 5x Reaction Buffer A<br />
Transport hazard class(es)<br />
ADR, ADN, IMDG, IATA<br />
None<br />
Class Void<br />
Packing group None<br />
ADR, IMDG, IATA Void<br />
Environmental hazards:<br />
Marine pollutant: No<br />
Special precautions for user Not applicable.<br />
Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code Not applicable.<br />
UN "Model Regulation": -<br />
15 Regulatory information<br />
Safety, health and environmental regulations/legislation specific for the substance or mixture<br />
Australian Inventory of Chemical Substances<br />
All ingredients are listed.<br />
National regulations<br />
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.<br />
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.<br />
16 Other information<br />
(Contd. of page 5)<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
Relevant phrases<br />
H302 Harmful if swallowed.<br />
H303 May be harmful if swallowed.<br />
H315 Causes skin irritation.<br />
H319 Causes serious eye irritation.<br />
H335 May cause respiratory irritation.<br />
Department issuing <strong>MSDS</strong>:<br />
<strong>Promega</strong> Corporation<br />
Safety Department<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
Abbreviations and acronyms:<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
ICAO: International Civil Aviation Organization<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
IMDG: International Maritime Code for Dangerous Goods<br />
IATA: International Air Transport Association<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
* Data compared to the previous version altered.<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 1/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Not classified as hazardous according to criteria of Australian Safety and Compensation Council<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
Product identifier<br />
Trade name: 0.1M DTT<br />
Article number: Turnkey10<br />
Relevant identified uses of the substance or mixture and uses advised against<br />
Application of the substance / the preparation: Laboratory chemicals<br />
Details of the supplier of the safety data sheet<br />
Manufacturer/Supplier:<br />
<strong>Promega</strong> Corporation<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
1-608-274-4330<br />
1-800-356-9526<br />
SDS author: Regulatory.Affairs@promega.com<br />
Manufactured by:<br />
Signal Chem<br />
550-5600Parkwood Way<br />
Richmond, BC V6V 2M2<br />
Canada<br />
Tel: 1-604-232-4600<br />
Further information obtainable from:<br />
<strong>Promega</strong> Australia<br />
Suite W3A, Level 3, Westside Building<br />
South Sydney Corporate Park<br />
75-85 O'Riordan Street<br />
(P.O. Box 7417)<br />
Alexandria NSW 2015<br />
Australia<br />
Phone: (61) 02 8338 3800<br />
Freecall: 1800 225 123<br />
Fax: (61) 02 8338 3855<br />
Freefax: 1800 626 017<br />
SDS author: regulatory_affairs@promega.com<br />
Emergency telephone number:<br />
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA<br />
and Canada: 1-800-424-9300<br />
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)<br />
AU<br />
(Contd. on page 2)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 2/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 0.1M DTT<br />
* 2 Hazards identification<br />
Classification of the substance or mixture<br />
Classification according to Regulation (EC) No 1272/2008<br />
The product is not classified according to the CLP regulation.<br />
Label elements<br />
Labelling according to Regulation (EC) No 1272/2008 Void<br />
Hazard pictograms Void<br />
Signal word Void<br />
Hazard statements Void<br />
Other hazards<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
3 Composition/information on ingredients<br />
Chemical characterization: Mixtures<br />
Description: Mixture of substances listed below with nonhazardous additions.<br />
Components:<br />
CAS: 3483-12-3<br />
RTECS: XO8576500<br />
* 4 First aid measures<br />
DL-Dithiothreitol<br />
Acute Tox. 4, H302; Skin Irrit. 2, H315; H319; STOT SE 3, H335<br />
Description of first aid measures<br />
General information: No special measures required.<br />
After inhalation: Supply fresh air; consult doctor in case of complaints.<br />
After skin contact: Generally the product does not irritate the skin.<br />
After eye contact: Rinse opened eye for several minutes under running water.<br />
After swallowing: If symptoms persist consult doctor.<br />
Information for doctor:<br />
Most important symptoms and effects, both acute and delayed None<br />
Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
* 5 Firefighting measures<br />
Extinguishing media<br />
Suitable extinguishing agents:<br />
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.<br />
Special hazards arising from the substance or mixture None known<br />
Advice for firefighters No special advice.<br />
Protective equipment: No special measures required.<br />
* 6 Accidental release measures<br />
Personal precautions, protective equipment and emergency procedures Not required.<br />
Environmental precautions: Do not allow to enter sewers/ surface or ground water.<br />
(Contd. of page 1)<br />
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 3/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 0.1M DTT<br />
Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
Reference to other sections<br />
No dangerous substances are released.<br />
See Section 7 for information on safe handling<br />
See Section 13 for disposal information.<br />
* 7 Handling and storage<br />
Handling<br />
Precautions for safe handling No special measures required.<br />
Information about fire - and explosion protection: The product is not flammable<br />
Conditions for safe storage, including any incompatibilities<br />
Storage<br />
Requirements to be met by storerooms and receptacles: No special requirements.<br />
Information about storage in one common storage facility: Not required.<br />
Further information about storage conditions: None.<br />
Specific end use(s) No further relevant information available.<br />
8 Exposure controls/personal protection<br />
(Contd. of page 2)<br />
Additional information about design of technical facilities: No further data; see item 7.<br />
Control parameters<br />
Ingredients with limit values that require monitoring at the workplace:<br />
The product does not contain any relevant quantities of materials with critical values that have to be monitored at<br />
the workplace.<br />
Additional information: The lists valid during the making were used as basis.<br />
Exposure controls<br />
Personal protective equipment<br />
General protective and hygienic measures<br />
The usual precautionary measures are to be adhered to when handling chemicals.<br />
Respiratory protection: Not required.<br />
Protection of hands:<br />
Protective gloves.<br />
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation<br />
Material of gloves:<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and<br />
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance<br />
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.<br />
Penetration time of glove material:<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
Eye protection: Goggles recommended during refilling.<br />
AU<br />
(Contd. on page 4)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 4/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 0.1M DTT<br />
* 9 Physical and chemical properties<br />
Information on basic physical and chemical properties<br />
General Information<br />
Appearance:<br />
Form: Fluid<br />
Colour: Colourless<br />
Odour: Characteristic<br />
Odour threshold: Not determined.<br />
Change in condition<br />
Melting point/Melting range: 0°C (32 °F)<br />
Boiling point/Boiling range: 100°C (212 °F)<br />
Flash point: Not applicable<br />
Flammability (solid, gaseous) Not applicable.<br />
Ignition temperature:<br />
Decomposition temperature: Not determined.<br />
Self-igniting: Product is not selfigniting.<br />
Danger of explosion: Product does not present an explosion hazard.<br />
Explosion limits:<br />
Lower: Not determined.<br />
Upper: Not determined.<br />
Vapour pressure: Not determined.<br />
Density: Not determined<br />
Relative density Not determined.<br />
Vapour density Not determined.<br />
Evaporation rate Not determined.<br />
Solubility in / Miscibility with<br />
Water: Not miscible or difficult to mix<br />
Partition coefficient (n-octanol/water): Not determined.<br />
Viscosity:<br />
dynamic: Not determined.<br />
kinematic: Not determined.<br />
Solvent content:<br />
Organic solvents: 0.0 %<br />
Water: 98.5 %<br />
Solids content: 1.5 %<br />
Other information No further relevant information available.<br />
* 10 Stability and reactivity<br />
(Contd. of page 3)<br />
Reactivity<br />
Chemical stability<br />
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
Possibility of hazardous reactions No dangerous reactions known<br />
Conditions to avoid No further relevant information available.<br />
(Contd. on page 5)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 5/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 0.1M DTT<br />
Incompatible materials: No further relevant information available.<br />
Hazardous decomposition products: No dangerous decomposition products known<br />
11 Toxicological information<br />
Information on toxicological effects<br />
Acute toxicity:<br />
LD/LC50 values relevant for classification: No data available<br />
Primary irritant effect:<br />
on the skin: No irritant effect.<br />
on the eye: Irritating effect.<br />
Sensitization: No sensitizing effects known.<br />
* 12 Ecological information<br />
(Contd. of page 4)<br />
Toxicity<br />
Aquatic toxicity: Not harmful to the aquatic environment<br />
Persistence and degradability Not available<br />
Behaviour in environmental systems:<br />
Bioaccumulative potential Not known<br />
Mobility in soil No further relevant information available.<br />
Ecotoxical effects:<br />
Remark: Not available<br />
Additional ecological information:<br />
General notes:<br />
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.<br />
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
Waste treatment methods<br />
Recommendation<br />
Disposal should be in accordance with applicable regional, national and local laws and regulations.<br />
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional<br />
handling information and protection of employees.<br />
Uncleaned packaging:<br />
Recommendation: Disposal must be made according to official regulations.<br />
* 14 Transport information<br />
UN-Number None<br />
ADR, ADN, IMDG, IATA Void<br />
UN proper shipping name None<br />
ADR, ADN, IMDG, IATA Void<br />
(Contd. on page 6)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 6/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 0.1M DTT<br />
Transport hazard class(es)<br />
ADR, ADN, IMDG, IATA<br />
None<br />
Class Void<br />
Packing group None<br />
ADR, IMDG, IATA Void<br />
Environmental hazards:<br />
Marine pollutant: No<br />
Special precautions for user Not applicable.<br />
Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code Not applicable.<br />
UN "Model Regulation": -<br />
15 Regulatory information<br />
Safety, health and environmental regulations/legislation specific for the substance or mixture<br />
Australian Inventory of Chemical Substances<br />
All ingredients are listed.<br />
National regulations<br />
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.<br />
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.<br />
16 Other information<br />
(Contd. of page 5)<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
Relevant phrases<br />
H302 Harmful if swallowed.<br />
H315 Causes skin irritation.<br />
H319 Causes serious eye irritation.<br />
H335 May cause respiratory irritation.<br />
Department issuing <strong>MSDS</strong>:<br />
<strong>Promega</strong> Corporation<br />
Safety Department<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
Abbreviations and acronyms:<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
ICAO: International Civil Aviation Organization<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
IMDG: International Maritime Code for Dangerous Goods<br />
IATA: International Air Transport Association<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
* Data compared to the previous version altered.<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 1/7<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Hazardous according to criteria of Australian Safety and Compensation Council<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
Product identifier<br />
Trade name: 2.5 M MnCl2<br />
Article number: Turnkey11<br />
Relevant identified uses of the substance or mixture and uses advised against<br />
Application of the substance / the preparation: Laboratory chemicals<br />
Details of the supplier of the safety data sheet<br />
Manufacturer/Supplier:<br />
<strong>Promega</strong> Corporation<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
1-608-274-4330<br />
1-800-356-9526<br />
SDS author: Regulatory.Affairs@promega.com<br />
Manufactured by:<br />
Signal Chem<br />
550-5600Parkwood Way<br />
Richmond, BC V6V 2M2<br />
Canada<br />
Tel: 1-604-232-4600<br />
Further information obtainable from:<br />
<strong>Promega</strong> Australia<br />
Suite W3A, Level 3, Westside Building<br />
South Sydney Corporate Park<br />
75-85 O'Riordan Street<br />
(P.O. Box 7417)<br />
Alexandria NSW 2015<br />
Australia<br />
Phone: (61) 02 8338 3800<br />
Freecall: 1800 225 123<br />
Fax: (61) 02 8338 3855<br />
Freefax: 1800 626 017<br />
SDS author: regulatory_affairs@promega.com<br />
Emergency telephone number:<br />
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA<br />
and Canada: 1-800-424-9300<br />
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)<br />
AU<br />
(Contd. on page 2)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 2/7<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 2.5 M MnCl2<br />
* 2 Hazards identification<br />
Classification of the substance or mixture<br />
Classification according to Regulation (EC) No 1272/2008<br />
GHS07<br />
(Contd. of page 1)<br />
Acute Tox. 4 H302 Harmful if swallowed.<br />
Label elements<br />
Labelling according to Regulation (EC) No 1272/2008<br />
The product is classified and labelled according to the CLP regulation.<br />
Hazard pictograms GHS07<br />
Signal word Warning<br />
Hazard-determining components of labelling:<br />
Manganese (II) Chloride<br />
Hazard statements<br />
H302 Harmful if swallowed.<br />
Precautionary statements<br />
P264 Wash thoroughly after handling.<br />
P270 Do no eat, drink or smoke when using this product.<br />
P301+P312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.<br />
P330 Rinse mouth.<br />
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.<br />
Other hazards<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
3 Composition/information on ingredients<br />
Chemical characterization: Mixtures<br />
Description: Mixture of substances listed below with nonhazardous additions.<br />
Components:<br />
CAS: 7773-01-5 Manganese (II) Chloride Acute Tox. 3, H301 25-50%<br />
RTECS: OO 0962500<br />
* 4 First aid measures<br />
Description of first aid measures<br />
General information:<br />
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours<br />
after the accident.<br />
Medical supervision for at least 48 hours.<br />
After inhalation: Supply fresh air; consult doctor in case of complaints.<br />
After skin contact: Generally the product does not irritate the skin.<br />
After eye contact: Rinse opened eye for several minutes under running water.<br />
After swallowing:<br />
Call for a doctor immediately.<br />
Seek immediate medical advice.<br />
(Contd. on page 3)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 3/7<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 2.5 M MnCl2<br />
Information for doctor:<br />
Most important symptoms and effects, both acute and delayed None<br />
Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
* 5 Firefighting measures<br />
Extinguishing media<br />
Suitable extinguishing agents:<br />
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.<br />
Special hazards arising from the substance or mixture None known<br />
Advice for firefighters<br />
No special advice.<br />
In the case of fire, wear respiratory protective equipment and chemical protective suit.<br />
* 6 Accidental release measures<br />
Personal precautions, protective equipment and emergency procedures Wear protective clothing.<br />
Environmental precautions:<br />
Do not allow product to reach sewage system or any water course.<br />
Inform respective authorities in case of seepage into water course or sewage system.<br />
Do not allow to enter sewers/ surface or ground water.<br />
Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
Dispose contaminated material as waste according to item 13.<br />
Ensure adequate ventilation.<br />
Reference to other sections<br />
See Section 7 for information on safe handling<br />
See Section 13 for disposal information.<br />
* 7 Handling and storage<br />
Handling<br />
Precautions for safe handling<br />
Keep receptacles tightly sealed.<br />
Ensure good ventilation/exhaustion at the workplace.<br />
Prevent formation of aerosols.<br />
Information about fire - and explosion protection: The product is not flammable<br />
Conditions for safe storage, including any incompatibilities<br />
Storage<br />
Requirements to be met by storerooms and receptacles: No special requirements.<br />
Information about storage in one common storage facility: Not required.<br />
Further information about storage conditions: None.<br />
Specific end use(s) No further relevant information available.<br />
8 Exposure controls/personal protection<br />
Additional information about design of technical facilities: No further data; see item 7.<br />
(Contd. of page 2)<br />
(Contd. on page 4)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 4/7<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 2.5 M MnCl2<br />
(Contd. of page 3)<br />
Control parameters<br />
Ingredients with limit values that require monitoring at the workplace:<br />
The product does not contain any relevant quantities of materials with critical values that have to be monitored at<br />
the workplace.<br />
Additional information: The lists valid during the making were used as basis.<br />
Exposure controls<br />
Personal protective equipment<br />
General protective and hygienic measures<br />
Keep away from foodstuffs, beverages and feed.<br />
Immediately remove all soiled and contaminated clothing<br />
Wash hands before breaks and at the end of work.<br />
Do not eat or drink while working.<br />
Respiratory protection:<br />
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use<br />
self-contained respiratory protective device.<br />
Protection of hands:<br />
Protective gloves.<br />
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation<br />
Material of gloves:<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and<br />
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance<br />
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.<br />
Penetration time of glove material:<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
Eye protection: Goggles recommended during refilling.<br />
* 9 Physical and chemical properties<br />
Information on basic physical and chemical properties<br />
General Information<br />
Appearance:<br />
Form: Fluid<br />
Colour: Colourless<br />
Odour: Characteristic<br />
Odour threshold: Not determined.<br />
Change in condition<br />
Melting point/Melting range: undetermined<br />
Boiling point/Boiling range: 100°C (212 °F)<br />
Flash point: Not applicable<br />
Flammability (solid, gaseous) Not applicable.<br />
Ignition temperature:<br />
Decomposition temperature: Not determined.<br />
Self-igniting: Product is not selfigniting.<br />
Danger of explosion: Product does not present an explosion hazard.<br />
Explosion limits:<br />
Lower: Not determined.<br />
(Contd. on page 5)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 5/7<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 2.5 M MnCl2<br />
Upper: Not determined.<br />
Vapour pressure: Not determined.<br />
Density at 20°C (68 °F): 1.83538 g/cm³ (15.316 lbs/gal)<br />
Relative density Not determined.<br />
Vapour density Not determined.<br />
Evaporation rate Not determined.<br />
Solubility in / Miscibility with<br />
Water: Not miscible or difficult to mix<br />
Partition coefficient (n-octanol/water): Not determined.<br />
Viscosity:<br />
dynamic: Not determined.<br />
kinematic: Not determined.<br />
Solvent content:<br />
Organic solvents: 0.0 %<br />
Water: 68.5 %<br />
Solids content: 42.3 %<br />
Other information No further relevant information available.<br />
* 10 Stability and reactivity<br />
Reactivity<br />
Chemical stability<br />
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
Possibility of hazardous reactions No dangerous reactions known<br />
Conditions to avoid No further relevant information available.<br />
Incompatible materials: No further relevant information available.<br />
Hazardous decomposition products: No dangerous decomposition products known<br />
11 Toxicological information<br />
Information on toxicological effects<br />
Acute toxicity:<br />
LD/LC50 values relevant for classification:<br />
7773-01-5 Manganese (II) Chloride<br />
Oral LD50 250 mg/kg (Rat)<br />
Primary irritant effect:<br />
on the skin: No irritant effect.<br />
on the eye: Irritating effect.<br />
Sensitization: No sensitizing effects known.<br />
* 12 Ecological information<br />
Toxicity<br />
Aquatic toxicity: Harmful to aquatic life<br />
Persistence and degradability Not available<br />
(Contd. of page 4)<br />
(Contd. on page 6)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 6/7<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 2.5 M MnCl2<br />
(Contd. of page 5)<br />
Behaviour in environmental systems:<br />
Bioaccumulative potential Not known<br />
Mobility in soil No further relevant information available.<br />
Ecotoxical effects:<br />
Remark: Harmful to fish<br />
Additional ecological information:<br />
General notes:<br />
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.<br />
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.<br />
Harmful to aquatic organisms<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
Waste treatment methods<br />
Recommendation<br />
Disposal should be in accordance with applicable regional, national and local laws and regulations.<br />
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional<br />
handling information and protection of employees.<br />
Uncleaned packaging:<br />
Recommendation: Disposal must be made according to official regulations.<br />
* 14 Transport information<br />
UN-Number None<br />
ADR, ADN, IMDG, IATA Void<br />
UN proper shipping name None<br />
ADR, ADN, IMDG, IATA Void<br />
Transport hazard class(es)<br />
ADR, ADN, IMDG, IATA<br />
None<br />
Class Void<br />
Packing group None<br />
ADR, IMDG, IATA Void<br />
Environmental hazards:<br />
Marine pollutant: No<br />
Special precautions for user Not applicable.<br />
Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code Not applicable.<br />
UN "Model Regulation": -<br />
AU<br />
(Contd. on page 7)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 7/7<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: 2.5 M MnCl2<br />
* 15 Regulatory information<br />
Safety, health and environmental regulations/legislation specific for the substance or mixture<br />
Australian Inventory of Chemical Substances<br />
All ingredients are listed.<br />
National regulations<br />
Class Share in %<br />
Wasser 68.5<br />
III 31.5<br />
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.<br />
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.<br />
16 Other information<br />
(Contd. of page 6)<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
Relevant phrases<br />
H301 Toxic if swallowed.<br />
Department issuing <strong>MSDS</strong>:<br />
<strong>Promega</strong> Corporation<br />
Safety Department<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
Abbreviations and acronyms:<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
ICAO: International Civil Aviation Organization<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
IMDG: International Maritime Code for Dangerous Goods<br />
IATA: International Air Transport Association<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
LC50: Lethal concentration, 50 percent<br />
LD50: Lethal dose, 50 percent<br />
* Data compared to the previous version altered.<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 1/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Not classified as hazardous according to criteria of Australian Safety and Compensation Council<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
Product identifier<br />
Trade name: ADP-Glo Reagent<br />
Article number: V912<br />
Relevant identified uses of the substance or mixture and uses advised against<br />
Application of the substance / the preparation: Laboratory chemicals<br />
Details of the supplier of the safety data sheet<br />
Manufacturer/Supplier:<br />
<strong>Promega</strong> Corporation<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
1-608-274-4330<br />
1-800-356-9526<br />
SDS author: Regulatory.Affairs@promega.com<br />
Further information obtainable from:<br />
<strong>Promega</strong> Australia<br />
Suite W3A, Level 3, Westside Building<br />
South Sydney Corporate Park<br />
75-85 O'Riordan Street<br />
(P.O. Box 7417)<br />
Alexandria NSW 2015<br />
Australia<br />
Phone: (61) 02 8338 3800<br />
Freecall: 1800 225 123<br />
Fax: (61) 02 8338 3855<br />
Freefax: 1800 626 017<br />
SDS author: regulatory_affairs@promega.com<br />
Emergency telephone number:<br />
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA<br />
and Canada: 1-800-424-9300<br />
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)<br />
* 2 Hazards identification<br />
Classification of the substance or mixture<br />
Classification according to Regulation (EC) No 1272/2008<br />
The product is not classified according to the CLP regulation.<br />
Label elements<br />
Labelling according to Regulation (EC) No 1272/2008 Void<br />
(Contd. on page 2)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 2/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP-Glo Reagent<br />
Hazard pictograms Void<br />
Signal word Void<br />
Hazard statements Void<br />
Other hazards<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
3 Composition/information on ingredients<br />
Chemical characterization: Mixtures<br />
Description: Mixture of substances listed below with nonhazardous additions.<br />
Components: Void<br />
* 4 First aid measures<br />
Description of first aid measures<br />
General information: No special measures required.<br />
After inhalation: Supply fresh air; consult doctor in case of complaints.<br />
After skin contact: Generally the product does not irritate the skin.<br />
After eye contact: Rinse opened eye for several minutes under running water.<br />
After swallowing: If symptoms persist consult doctor.<br />
Information for doctor:<br />
Most important symptoms and effects, both acute and delayed None<br />
Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
* 5 Firefighting measures<br />
Extinguishing media<br />
Suitable extinguishing agents:<br />
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.<br />
Special hazards arising from the substance or mixture None known<br />
Advice for firefighters No special advice.<br />
Protective equipment: No special measures required.<br />
* 6 Accidental release measures<br />
Personal precautions, protective equipment and emergency procedures Not required.<br />
Environmental precautions: No special measures required.<br />
Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
Reference to other sections<br />
No dangerous substances are released.<br />
See Section 7 for information on safe handling<br />
See Section 13 for disposal information.<br />
(Contd. of page 1)<br />
AU<br />
(Contd. on page 3)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 3/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP-Glo Reagent<br />
* 7 Handling and storage<br />
Handling<br />
Precautions for safe handling No special measures required.<br />
Information about fire - and explosion protection: The product is not flammable<br />
Conditions for safe storage, including any incompatibilities<br />
Storage<br />
Requirements to be met by storerooms and receptacles: No special requirements.<br />
Information about storage in one common storage facility: Not required.<br />
Further information about storage conditions: None.<br />
Specific end use(s) No further relevant information available.<br />
8 Exposure controls/personal protection<br />
(Contd. of page 2)<br />
Additional information about design of technical facilities: No further data; see item 7.<br />
Control parameters<br />
Ingredients with limit values that require monitoring at the workplace:<br />
The product does not contain any relevant quantities of materials with critical values that have to be monitored at<br />
the workplace.<br />
Additional information: The lists valid during the making were used as basis.<br />
Exposure controls<br />
Personal protective equipment<br />
General protective and hygienic measures<br />
The usual precautionary measures are to be adhered to when handling chemicals.<br />
Respiratory protection: Not required.<br />
Protection of hands:<br />
Protective gloves.<br />
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation<br />
Material of gloves:<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and<br />
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance<br />
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.<br />
Penetration time of glove material:<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
Eye protection: Goggles recommended during refilling.<br />
* 9 Physical and chemical properties<br />
Information on basic physical and chemical properties<br />
General Information<br />
Appearance:<br />
Form: Fluid<br />
Colour: Colourless<br />
Odour: Characteristic<br />
Odour threshold: Not determined.<br />
pH-value at 20°C (68 °F): 7.5<br />
(Contd. on page 4)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 4/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP-Glo Reagent<br />
Change in condition<br />
Melting point/Melting range: 0°C (32 °F)<br />
Boiling point/Boiling range: undetermined<br />
Flash point: Not applicable<br />
Flammability (solid, gaseous) Not applicable.<br />
Ignition temperature:<br />
Decomposition temperature: Not determined.<br />
Self-igniting: Product is not selfigniting.<br />
Danger of explosion: Product does not present an explosion hazard.<br />
Explosion limits:<br />
Lower: Not determined.<br />
Upper: Not determined.<br />
Vapour pressure: Not determined.<br />
Density: Not determined<br />
Relative density Not determined.<br />
Vapour density Not determined.<br />
Evaporation rate Not determined.<br />
Solubility in / Miscibility with<br />
Water: Not miscible or difficult to mix<br />
Partition coefficient (n-octanol/water): Not determined.<br />
Viscosity:<br />
dynamic: Not determined.<br />
kinematic: Not determined.<br />
Solvent content:<br />
Organic solvents: 0.7 %<br />
Water: 99.0 %<br />
Other information No further relevant information available.<br />
* 10 Stability and reactivity<br />
Reactivity<br />
Chemical stability<br />
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
Possibility of hazardous reactions No dangerous reactions known<br />
Conditions to avoid No further relevant information available.<br />
Incompatible materials: No further relevant information available.<br />
Hazardous decomposition products: No dangerous decomposition products known<br />
11 Toxicological information<br />
Information on toxicological effects<br />
Acute toxicity:<br />
LD/LC50 values relevant for classification: No data available<br />
(Contd. of page 3)<br />
(Contd. on page 5)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 5/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP-Glo Reagent<br />
Primary irritant effect:<br />
on the skin: No irritant effect.<br />
on the eye: Irritating effect.<br />
Sensitization: No sensitizing effects known.<br />
* 12 Ecological information<br />
Toxicity<br />
Aquatic toxicity: Not harmful to the aquatic environment<br />
Persistence and degradability Not available<br />
Behaviour in environmental systems:<br />
Bioaccumulative potential Not known<br />
Mobility in soil No further relevant information available.<br />
Ecotoxical effects:<br />
Remark: Not available<br />
Additional ecological information:<br />
General notes: Generally not hazardous for water.<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
(Contd. of page 4)<br />
Waste treatment methods<br />
Recommendation<br />
Disposal should be in accordance with applicable regional, national and local laws and regulations.<br />
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional<br />
handling information and protection of employees.<br />
Uncleaned packaging:<br />
Recommendation: Disposal must be made according to official regulations.<br />
* 14 Transport information<br />
UN-Number None<br />
ADR, ADN, IMDG, IATA Void<br />
UN proper shipping name None<br />
ADR, ADN, IMDG, IATA Void<br />
Transport hazard class(es)<br />
ADR, ADN, IMDG, IATA<br />
None<br />
Class Void<br />
Packing group None<br />
ADR, IMDG, IATA Void<br />
Environmental hazards:<br />
Marine pollutant: No<br />
(Contd. on page 6)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 6/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP-Glo Reagent<br />
Special precautions for user Not applicable.<br />
Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code Not applicable.<br />
UN "Model Regulation": -<br />
* 15 Regulatory information<br />
Safety, health and environmental regulations/legislation specific for the substance or mixture<br />
Australian Inventory of Chemical Substances<br />
56-81-5 glycerol<br />
77-86-1 2-Amino-2-(hydroxymethyl)-1,3-propanediol<br />
1185-53-1 2-Amino-2-(hydroxymethyl)-1,3-propanediolhydrochloride<br />
68410-45-7 Gelatins, hydrolyzates<br />
7647-14-5 sodium chloride<br />
7778-77-0 potassium phosphate monobasic<br />
3483-12-3 DL-Dithiothreitol<br />
9002-93-1 Polyethylene glycol tert-octylphenyl ether<br />
7732-18-5 water<br />
National regulations<br />
Class Share in %<br />
Wasser 99.0<br />
NK 0.7<br />
Waterhazard class: Generally not hazardous for water.<br />
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.<br />
16 Other information<br />
(Contd. of page 5)<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
Department issuing <strong>MSDS</strong>:<br />
<strong>Promega</strong> Corporation<br />
Safety Department<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
Abbreviations and acronyms:<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
ICAO: International Civil Aviation Organization<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
IMDG: International Maritime Code for Dangerous Goods<br />
IATA: International Air Transport Association<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
* Data compared to the previous version altered.<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 1/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Not classified as hazardous according to criteria of Australian Safety and Compensation Council<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
Product identifier<br />
Trade name: Kinase Detection Buffer<br />
Article number: V913<br />
Relevant identified uses of the substance or mixture and uses advised against<br />
Application of the substance / the preparation: Laboratory chemicals<br />
Details of the supplier of the safety data sheet<br />
Manufacturer/Supplier:<br />
<strong>Promega</strong> Corporation<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
1-608-274-4330<br />
1-800-356-9526<br />
SDS author: Regulatory.Affairs@promega.com<br />
Further information obtainable from:<br />
<strong>Promega</strong> Australia<br />
Suite W3A, Level 3, Westside Building<br />
South Sydney Corporate Park<br />
75-85 O'Riordan Street<br />
(P.O. Box 7417)<br />
Alexandria NSW 2015<br />
Australia<br />
Phone: (61) 02 8338 3800<br />
Freecall: 1800 225 123<br />
Fax: (61) 02 8338 3855<br />
Freefax: 1800 626 017<br />
SDS author: regulatory_affairs@promega.com<br />
Emergency telephone number:<br />
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA<br />
and Canada: 1-800-424-9300<br />
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)<br />
* 2 Hazards identification<br />
Classification of the substance or mixture<br />
Classification according to Regulation (EC) No 1272/2008<br />
The product is not classified according to the CLP regulation.<br />
Label elements<br />
Labelling according to Regulation (EC) No 1272/2008 Void<br />
(Contd. on page 2)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 2/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Buffer<br />
Hazard pictograms Void<br />
Signal word Void<br />
Hazard statements Void<br />
Other hazards<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
3 Composition/information on ingredients<br />
Chemical characterization: Mixtures<br />
Description: Mixture of substances listed below with nonhazardous additions.<br />
Components:<br />
7758-11-4 dipotassium hydrogenorthophosphate<br />
Eye Dam. 1, H318<br />
9002-92-0 Polyethylene glycol 400 dodecyl ether<br />
Skin Irrit. 2, H315; H319; STOT SE 3, H335; Acute Tox. 5, H303<br />
1119-94-4 Dodecyltrimethylammonium bromide<br />
Skin Irrit. 2, H315; H319; STOT SE 3, H335<br />
* 4 First aid measures<br />
Description of first aid measures<br />
General information: No special measures required.<br />
After inhalation: Supply fresh air; consult doctor in case of complaints.<br />
After skin contact: Generally the product does not irritate the skin.<br />
After eye contact: Rinse opened eye for several minutes under running water.<br />
After swallowing: If symptoms persist consult doctor.<br />
Information for doctor:<br />
Most important symptoms and effects, both acute and delayed None<br />
Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
* 5 Firefighting measures<br />
Extinguishing media<br />
Suitable extinguishing agents:<br />
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.<br />
Special hazards arising from the substance or mixture None known<br />
Advice for firefighters No special advice.<br />
Protective equipment: No special measures required.<br />
* 6 Accidental release measures<br />
Personal precautions, protective equipment and emergency procedures Not required.<br />
Environmental precautions: Do not allow to enter sewers/ surface or ground water.<br />
Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
(Contd. of page 1)<br />
1.0-5.0%<br />
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 3/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Buffer<br />
Reference to other sections<br />
No dangerous substances are released.<br />
See Section 7 for information on safe handling<br />
See Section 13 for disposal information.<br />
* 7 Handling and storage<br />
Handling<br />
Precautions for safe handling No special measures required.<br />
Information about fire - and explosion protection: The product is not flammable<br />
Conditions for safe storage, including any incompatibilities<br />
Storage<br />
Requirements to be met by storerooms and receptacles: No special requirements.<br />
Information about storage in one common storage facility: Not required.<br />
Further information about storage conditions: None.<br />
Specific end use(s) No further relevant information available.<br />
8 Exposure controls/personal protection<br />
(Contd. of page 2)<br />
Additional information about design of technical facilities: No further data; see item 7.<br />
Control parameters<br />
Ingredients with limit values that require monitoring at the workplace:<br />
The product does not contain any relevant quantities of materials with critical values that have to be monitored at<br />
the workplace.<br />
Additional information: The lists valid during the making were used as basis.<br />
Exposure controls<br />
Personal protective equipment<br />
General protective and hygienic measures<br />
The usual precautionary measures are to be adhered to when handling chemicals.<br />
Respiratory protection: Not required.<br />
Protection of hands:<br />
Protective gloves.<br />
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation<br />
Material of gloves:<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and<br />
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance<br />
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.<br />
Penetration time of glove material:<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
Eye protection: Goggles recommended during refilling.<br />
* 9 Physical and chemical properties<br />
Information on basic physical and chemical properties<br />
General Information<br />
Appearance:<br />
Form: Fluid<br />
Colour: Colourless<br />
(Contd. on page 4)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 4/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Buffer<br />
Odour: Characteristic<br />
Odour threshold: Not determined.<br />
Change in condition<br />
Melting point/Melting range: undetermined<br />
Boiling point/Boiling range: undetermined<br />
Flash point: Not applicable<br />
Flammability (solid, gaseous) Not applicable.<br />
Ignition temperature:<br />
Decomposition temperature: Not determined.<br />
Self-igniting: Product is not selfigniting.<br />
Danger of explosion: Product does not present an explosion hazard.<br />
Explosion limits:<br />
Lower: Not determined.<br />
Upper: Not determined.<br />
Vapour pressure: Not determined.<br />
Density: Not determined<br />
Relative density Not determined.<br />
Vapour density Not determined.<br />
Evaporation rate Not determined.<br />
Solubility in / Miscibility with<br />
Water: Not miscible or difficult to mix<br />
Partition coefficient (n-octanol/water): Not determined.<br />
Viscosity:<br />
dynamic: Not determined.<br />
kinematic: Not determined.<br />
Solvent content:<br />
Organic solvents: 0.0 %<br />
Water: 88.6 %<br />
Other information No further relevant information available.<br />
* 10 Stability and reactivity<br />
Reactivity<br />
Chemical stability<br />
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
Possibility of hazardous reactions No dangerous reactions known<br />
Conditions to avoid No further relevant information available.<br />
Incompatible materials: No further relevant information available.<br />
Hazardous decomposition products: No dangerous decomposition products known<br />
(Contd. of page 3)<br />
AU<br />
(Contd. on page 5)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 5/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Buffer<br />
11 Toxicological information<br />
Information on toxicological effects<br />
Acute toxicity:<br />
LD/LC50 values relevant for classification: No data available<br />
Primary irritant effect:<br />
on the skin: No irritant effect.<br />
on the eye: Irritating effect.<br />
Sensitization: No sensitizing effects known.<br />
* 12 Ecological information<br />
(Contd. of page 4)<br />
Toxicity<br />
Aquatic toxicity: Not harmful to the aquatic environment<br />
Persistence and degradability Not available<br />
Behaviour in environmental systems:<br />
Bioaccumulative potential Not known<br />
Mobility in soil No further relevant information available.<br />
Ecotoxical effects:<br />
Remark: Not available<br />
Additional ecological information:<br />
General notes:<br />
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.<br />
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
Waste treatment methods<br />
Recommendation<br />
Disposal should be in accordance with applicable regional, national and local laws and regulations.<br />
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional<br />
handling information and protection of employees.<br />
Uncleaned packaging:<br />
Recommendation: Disposal must be made according to official regulations.<br />
* 14 Transport information<br />
UN-Number None<br />
UN proper shipping name None<br />
Transport hazard class(es) None<br />
Packing group None<br />
Environmental hazards:<br />
Marine pollutant: No<br />
(Contd. on page 6)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 6/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Buffer<br />
Special precautions for user Not applicable.<br />
Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code Not applicable.<br />
* 15 Regulatory information<br />
Safety, health and environmental regulations/legislation specific for the substance or mixture<br />
Australian Inventory of Chemical Substances<br />
7778-77-0 potassium phosphate monobasic<br />
7758-11-4 dipotassium hydrogenorthophosphate<br />
9002-92-0 Polyethylene glycol 400 dodecyl ether<br />
68-04-2 Sodium Citrate<br />
1119-94-4 Dodecyltrimethylammonium bromide<br />
4578-31-8 Adenosine 5′-monophosphate disodium salt<br />
7487-88-9 Sulfuric acid magnesium salt (1:1)<br />
7681-49-4 sodium fluoride<br />
139-33-3 disodium dihydrogenethylenediaminetetraacetate<br />
7365-45-9 4-(2-hydroxyethyl)piperazin-1-ylethanesulphonic acid<br />
7732-18-5 water<br />
National regulations<br />
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.<br />
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.<br />
16 Other information<br />
(Contd. of page 5)<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
Relevant phrases<br />
H303 May be harmful if swallowed.<br />
H315 Causes skin irritation.<br />
H318 Causes serious eye damage.<br />
H319 Causes serious eye irritation.<br />
H335 May cause respiratory irritation.<br />
Department issuing <strong>MSDS</strong>:<br />
<strong>Promega</strong> Corporation<br />
Safety Department<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
Abbreviations and acronyms:<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
* Data compared to the previous version altered.<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 1/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Not classified as hazardous according to criteria of Australian Safety and Compensation Council<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
Product identifier<br />
Trade name: Kinase Detection Substrate<br />
Article number: V914<br />
Relevant identified uses of the substance or mixture and uses advised against<br />
Application of the substance / the preparation: Laboratory chemicals<br />
Details of the supplier of the safety data sheet<br />
Manufacturer/Supplier:<br />
<strong>Promega</strong> Corporation<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
1-608-274-4330<br />
1-800-356-9526<br />
SDS author: Regulatory.Affairs@promega.com<br />
Further information obtainable from:<br />
<strong>Promega</strong> Australia<br />
Suite W3A, Level 3, Westside Building<br />
South Sydney Corporate Park<br />
75-85 O'Riordan Street<br />
(P.O. Box 7417)<br />
Alexandria NSW 2015<br />
Australia<br />
Phone: (61) 02 8338 3800<br />
Freecall: 1800 225 123<br />
Fax: (61) 02 8338 3855<br />
Freefax: 1800 626 017<br />
SDS author: regulatory_affairs@promega.com<br />
Emergency telephone number:<br />
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA<br />
and Canada: 1-800-424-9300<br />
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)<br />
* 2 Hazards identification<br />
Classification of the substance or mixture<br />
Classification according to Regulation (EC) No 1272/2008<br />
The product is not classified according to the CLP regulation.<br />
Label elements<br />
Labelling according to Regulation (EC) No 1272/2008 Void<br />
(Contd. on page 2)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 2/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Substrate<br />
Hazard pictograms Void<br />
Signal word Void<br />
Hazard statements Void<br />
Other hazards<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
3 Composition/information on ingredients<br />
Chemical characterization: Mixtures<br />
Description: Mixture of substances listed below with nonhazardous additions.<br />
Components: Void<br />
* 4 First aid measures<br />
Description of first aid measures<br />
General information: No special measures required.<br />
After inhalation: Supply fresh air; consult doctor in case of complaints.<br />
After skin contact: Generally the product does not irritate the skin.<br />
After eye contact: Rinse opened eye for several minutes under running water.<br />
After swallowing: If symptoms persist consult doctor.<br />
Information for doctor:<br />
Most important symptoms and effects, both acute and delayed None<br />
Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
* 5 Firefighting measures<br />
Extinguishing media<br />
Suitable extinguishing agents:<br />
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.<br />
Special hazards arising from the substance or mixture None known<br />
Advice for firefighters No special advice.<br />
Protective equipment: No special measures required.<br />
* 6 Accidental release measures<br />
Personal precautions, protective equipment and emergency procedures Not required.<br />
Environmental precautions: Do not allow to enter sewers/ surface or ground water.<br />
Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
Reference to other sections<br />
No dangerous substances are released.<br />
See Section 7 for information on safe handling<br />
See Section 13 for disposal information.<br />
(Contd. of page 1)<br />
AU<br />
(Contd. on page 3)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 3/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Substrate<br />
* 7 Handling and storage<br />
Handling<br />
Precautions for safe handling No special measures required.<br />
Information about fire - and explosion protection: The product is not flammable<br />
Conditions for safe storage, including any incompatibilities<br />
Storage<br />
Requirements to be met by storerooms and receptacles: No special requirements.<br />
Information about storage in one common storage facility: Not required.<br />
Further information about storage conditions: None.<br />
Specific end use(s) No further relevant information available.<br />
8 Exposure controls/personal protection<br />
(Contd. of page 2)<br />
Additional information about design of technical facilities: No further data; see item 7.<br />
Control parameters<br />
Ingredients with limit values that require monitoring at the workplace:<br />
The product does not contain any relevant quantities of materials with critical values that have to be monitored at<br />
the workplace.<br />
Additional information: The lists valid during the making were used as basis.<br />
Exposure controls<br />
Personal protective equipment<br />
General protective and hygienic measures<br />
The usual precautionary measures are to be adhered to when handling chemicals.<br />
Respiratory protection: Not required.<br />
Protection of hands:<br />
Protective gloves.<br />
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation<br />
Material of gloves:<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and<br />
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance<br />
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.<br />
Penetration time of glove material:<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
Eye protection: Goggles recommended during refilling.<br />
* 9 Physical and chemical properties<br />
Information on basic physical and chemical properties<br />
General Information<br />
Appearance:<br />
Form: Fluid<br />
Colour: Colourless<br />
Odour: Characteristic<br />
Odour threshold: Not determined.<br />
pH-value at 20°C (68 °F): 6<br />
(Contd. on page 4)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 4/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Substrate<br />
Change in condition<br />
Melting point/Melting range: 0°C (32 °F)<br />
Boiling point/Boiling range: undetermined<br />
Flash point: Not applicable<br />
Flammability (solid, gaseous) Not applicable.<br />
Ignition temperature:<br />
Decomposition temperature: Not determined.<br />
Self-igniting: Product is not selfigniting.<br />
Danger of explosion: Product does not present an explosion hazard.<br />
Explosion limits:<br />
Lower: Not determined.<br />
Upper: Not determined.<br />
Vapour pressure: Not determined.<br />
Density at 20°C (68 °F): 1.014 g/cm³ (8.462 lbs/gal)<br />
Relative density Not determined.<br />
Vapour density Not determined.<br />
Evaporation rate Not determined.<br />
Solubility in / Miscibility with<br />
Water: Not miscible or difficult to mix<br />
Partition coefficient (n-octanol/water): Not determined.<br />
Viscosity:<br />
dynamic: Not determined.<br />
kinematic: Not determined.<br />
Solvent content:<br />
Organic solvents: 0.0 %<br />
Water: 95.5 %<br />
Other information No further relevant information available.<br />
* 10 Stability and reactivity<br />
Reactivity<br />
Chemical stability<br />
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
Possibility of hazardous reactions No dangerous reactions known<br />
Conditions to avoid No further relevant information available.<br />
Incompatible materials: No further relevant information available.<br />
Hazardous decomposition products: No dangerous decomposition products known<br />
11 Toxicological information<br />
Information on toxicological effects<br />
Acute toxicity:<br />
LD/LC50 values relevant for classification: No data available<br />
(Contd. of page 3)<br />
(Contd. on page 5)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 5/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Substrate<br />
Primary irritant effect:<br />
on the skin: No irritant effect.<br />
on the eye: Irritating effect.<br />
Sensitization: No sensitizing effects known.<br />
* 12 Ecological information<br />
(Contd. of page 4)<br />
Toxicity<br />
Aquatic toxicity: Not harmful to the aquatic environment<br />
Persistence and degradability Not available<br />
Behaviour in environmental systems:<br />
Bioaccumulative potential Not known<br />
Mobility in soil No further relevant information available.<br />
Ecotoxical effects:<br />
Remark: Not available<br />
Additional ecological information:<br />
General notes:<br />
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.<br />
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
Waste treatment methods<br />
Recommendation<br />
Disposal should be in accordance with applicable regional, national and local laws and regulations.<br />
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional<br />
handling information and protection of employees.<br />
Uncleaned packaging:<br />
Recommendation: Disposal must be made according to official regulations.<br />
* 14 Transport information<br />
UN-Number None<br />
UN proper shipping name None<br />
Transport hazard class(es) None<br />
Packing group None<br />
Environmental hazards:<br />
Marine pollutant: No<br />
Special precautions for user Not applicable.<br />
(Contd. on page 6)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 6/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Kinase Detection Substrate<br />
Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code Not applicable.<br />
* 15 Regulatory information<br />
Safety, health and environmental regulations/legislation specific for the substance or mixture<br />
Australian Inventory of Chemical Substances<br />
68410-45-7 Gelatins, hydrolyzates<br />
68-04-2 Sodium Citrate<br />
7365-45-9 4-(2-hydroxyethyl)piperazin-1-ylethanesulphonic acid<br />
7647-14-5 sodium chloride<br />
7487-88-9 Sulfuric acid magnesium salt (1:1)<br />
139-33-3 disodium dihydrogenethylenediaminetetraacetate<br />
9001-59-6 Kinase (phosphorylating), pyruvate<br />
77-92-9 Citric Acid<br />
7732-18-5 water<br />
National regulations<br />
Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.<br />
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.<br />
16 Other information<br />
(Contd. of page 5)<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
Department issuing <strong>MSDS</strong>:<br />
<strong>Promega</strong> Corporation<br />
Safety Department<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
Abbreviations and acronyms:<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
* Data compared to the previous version altered.<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 1/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Not classified as hazardous according to criteria of Australian Safety and Compensation Council<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
Product identifier<br />
Trade name: Ultra Pure ATP, 10mM<br />
Article number: V915<br />
Relevant identified uses of the substance or mixture and uses advised against<br />
Application of the substance / the preparation: Laboratory chemicals<br />
Details of the supplier of the safety data sheet<br />
Manufacturer/Supplier:<br />
<strong>Promega</strong> Corporation<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
1-608-274-4330<br />
1-800-356-9526<br />
SDS author: Regulatory.Affairs@promega.com<br />
Further information obtainable from:<br />
<strong>Promega</strong> Australia<br />
Suite W3A, Level 3, Westside Building<br />
South Sydney Corporate Park<br />
75-85 O'Riordan Street<br />
(P.O. Box 7417)<br />
Alexandria NSW 2015<br />
Australia<br />
Phone: (61) 02 8338 3800<br />
Freecall: 1800 225 123<br />
Fax: (61) 02 8338 3855<br />
Freefax: 1800 626 017<br />
SDS author: regulatory_affairs@promega.com<br />
Emergency telephone number:<br />
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA<br />
and Canada: 1-800-424-9300<br />
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)<br />
* 2 Hazards identification<br />
Classification of the substance or mixture<br />
Classification according to Regulation (EC) No 1272/2008<br />
The product is not classified according to the CLP regulation.<br />
Label elements<br />
Labelling according to Regulation (EC) No 1272/2008 Void<br />
(Contd. on page 2)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 2/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Ultra Pure ATP, 10mM<br />
Hazard pictograms Void<br />
Signal word Void<br />
Hazard statements Void<br />
Other hazards<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
3 Composition/information on ingredients<br />
Chemical characterization: Mixtures<br />
Description: Mixture of substances listed below with nonhazardous additions.<br />
Components: Void<br />
* 4 First aid measures<br />
Description of first aid measures<br />
General information: No special measures required.<br />
After inhalation: Supply fresh air; consult doctor in case of complaints.<br />
After skin contact: Generally the product does not irritate the skin.<br />
After eye contact: Rinse opened eye for several minutes under running water.<br />
After swallowing: If symptoms persist consult doctor.<br />
Information for doctor:<br />
Most important symptoms and effects, both acute and delayed None<br />
Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
* 5 Firefighting measures<br />
Extinguishing media<br />
Suitable extinguishing agents:<br />
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.<br />
Special hazards arising from the substance or mixture None known<br />
Advice for firefighters No special advice.<br />
Protective equipment: No special measures required.<br />
* 6 Accidental release measures<br />
Personal precautions, protective equipment and emergency procedures Not required.<br />
Environmental precautions: No special measures required.<br />
Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
Reference to other sections<br />
No dangerous substances are released.<br />
See Section 7 for information on safe handling<br />
See Section 13 for disposal information.<br />
(Contd. of page 1)<br />
AU<br />
(Contd. on page 3)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 3/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Ultra Pure ATP, 10mM<br />
* 7 Handling and storage<br />
Handling<br />
Precautions for safe handling No special measures required.<br />
Information about fire - and explosion protection: The product is not flammable<br />
Conditions for safe storage, including any incompatibilities<br />
Storage<br />
Requirements to be met by storerooms and receptacles: No special requirements.<br />
Information about storage in one common storage facility: Not required.<br />
Further information about storage conditions: None.<br />
Specific end use(s) No further relevant information available.<br />
8 Exposure controls/personal protection<br />
(Contd. of page 2)<br />
Additional information about design of technical facilities: No further data; see item 7.<br />
Control parameters<br />
Ingredients with limit values that require monitoring at the workplace:<br />
The product does not contain any relevant quantities of materials with critical values that have to be monitored at<br />
the workplace.<br />
Additional information: The lists valid during the making were used as basis.<br />
Exposure controls<br />
Personal protective equipment<br />
General protective and hygienic measures<br />
The usual precautionary measures are to be adhered to when handling chemicals.<br />
Respiratory protection: Not required.<br />
Protection of hands:<br />
Protective gloves.<br />
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation<br />
Material of gloves:<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and<br />
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance<br />
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.<br />
Penetration time of glove material:<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
Eye protection: Goggles recommended during refilling.<br />
* 9 Physical and chemical properties<br />
Information on basic physical and chemical properties<br />
General Information<br />
Appearance:<br />
Form: Fluid<br />
Colour: Colourless<br />
Odour: Characteristic<br />
Odour threshold: Not determined.<br />
Change in condition<br />
Melting point/Melting range: 0°C (32 °F)<br />
(Contd. on page 4)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 4/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Ultra Pure ATP, 10mM<br />
Boiling point/Boiling range: undetermined<br />
Flash point: Not applicable<br />
Flammability (solid, gaseous) Not applicable.<br />
Ignition temperature:<br />
Decomposition temperature: Not determined.<br />
Self-igniting: Product is not selfigniting.<br />
Danger of explosion: Product does not present an explosion hazard.<br />
Explosion limits:<br />
Lower: Not determined.<br />
Upper: Not determined.<br />
Vapour pressure: Not determined.<br />
Density: Not determined<br />
Relative density Not determined.<br />
Vapour density Not determined.<br />
Evaporation rate Not determined.<br />
Solubility in / Miscibility with<br />
Water: Not miscible or difficult to mix<br />
Partition coefficient (n-octanol/water): Not determined.<br />
Viscosity:<br />
dynamic: Not determined.<br />
kinematic: Not determined.<br />
Solvent content:<br />
Organic solvents: 0.0 %<br />
Water: 99.4 %<br />
Other information No further relevant information available.<br />
* 10 Stability and reactivity<br />
Reactivity<br />
Chemical stability<br />
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
Possibility of hazardous reactions No dangerous reactions known<br />
Conditions to avoid No further relevant information available.<br />
Incompatible materials: No further relevant information available.<br />
Hazardous decomposition products: No dangerous decomposition products known<br />
11 Toxicological information<br />
Information on toxicological effects<br />
Acute toxicity:<br />
LD/LC50 values relevant for classification: No data available<br />
Primary irritant effect:<br />
on the skin: No irritant effect.<br />
on the eye: Irritating effect.<br />
(Contd. of page 3)<br />
(Contd. on page 5)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 5/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Ultra Pure ATP, 10mM<br />
Sensitization: No sensitizing effects known.<br />
* 12 Ecological information<br />
Toxicity<br />
Aquatic toxicity: Not harmful to the aquatic environment<br />
Persistence and degradability Not available<br />
Behaviour in environmental systems:<br />
Bioaccumulative potential Not known<br />
Mobility in soil No further relevant information available.<br />
Ecotoxical effects:<br />
Remark: Not available<br />
Additional ecological information:<br />
General notes: Generally not hazardous for water.<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
(Contd. of page 4)<br />
Waste treatment methods<br />
Recommendation<br />
Disposal should be in accordance with applicable regional, national and local laws and regulations.<br />
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional<br />
handling information and protection of employees.<br />
Uncleaned packaging:<br />
Recommendation: Disposal must be made according to official regulations.<br />
* 14 Transport information<br />
UN-Number None<br />
UN proper shipping name None<br />
Transport hazard class(es) None<br />
Packing group None<br />
Environmental hazards:<br />
Marine pollutant: No<br />
Special precautions for user Not applicable.<br />
Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code Not applicable.<br />
AU<br />
(Contd. on page 6)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 6/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: Ultra Pure ATP, 10mM<br />
15 Regulatory information<br />
Safety, health and environmental regulations/legislation specific for the substance or mixture<br />
Australian Inventory of Chemical Substances<br />
All ingredients are listed.<br />
National regulations<br />
Waterhazard class: Generally not hazardous for water.<br />
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.<br />
16 Other information<br />
(Contd. of page 5)<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
Department issuing <strong>MSDS</strong>:<br />
<strong>Promega</strong> Corporation<br />
Safety Department<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
Abbreviations and acronyms:<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
* Data compared to the previous version altered.<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 1/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Not classified as hazardous according to criteria of Australian Safety and Compensation Council<br />
* 1 Identification of the substance/mixture and of the company/undertaking<br />
Product identifier<br />
Trade name: ADP, 10mM<br />
Article number: V916<br />
Relevant identified uses of the substance or mixture and uses advised against<br />
Application of the substance / the preparation: Laboratory chemicals<br />
Details of the supplier of the safety data sheet<br />
Manufacturer/Supplier:<br />
<strong>Promega</strong> Corporation<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
1-608-274-4330<br />
1-800-356-9526<br />
SDS author: Regulatory.Affairs@promega.com<br />
Further information obtainable from:<br />
<strong>Promega</strong> Australia<br />
Suite W3A, Level 3, Westside Building<br />
South Sydney Corporate Park<br />
75-85 O'Riordan Street<br />
(P.O. Box 7417)<br />
Alexandria NSW 2015<br />
Australia<br />
Phone: (61) 02 8338 3800<br />
Freecall: 1800 225 123<br />
Fax: (61) 02 8338 3855<br />
Freefax: 1800 626 017<br />
SDS author: regulatory_affairs@promega.com<br />
Emergency telephone number:<br />
For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA<br />
and Canada: 1-800-424-9300<br />
Outside USA and Canada: +1 703-527-3887 (collect calls accepted)<br />
* 2 Hazards identification<br />
Classification of the substance or mixture<br />
Classification according to Regulation (EC) No 1272/2008<br />
The product is not classified according to the CLP regulation.<br />
Label elements<br />
Labelling according to Regulation (EC) No 1272/2008 Void<br />
(Contd. on page 2)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 2/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP, 10mM<br />
Hazard pictograms Void<br />
Signal word Void<br />
Hazard statements Void<br />
Other hazards<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
3 Composition/information on ingredients<br />
Chemical characterization: Mixtures<br />
Description: Mixture of substances listed below with nonhazardous additions.<br />
Components: Void<br />
* 4 First aid measures<br />
Description of first aid measures<br />
General information: No special measures required.<br />
After inhalation: Supply fresh air; consult doctor in case of complaints.<br />
After skin contact: Generally the product does not irritate the skin.<br />
After eye contact: Rinse opened eye for several minutes under running water.<br />
After swallowing: If symptoms persist consult doctor.<br />
Information for doctor:<br />
Most important symptoms and effects, both acute and delayed None<br />
Indication of any immediate medical attention and special treatment needed<br />
No further relevant information available.<br />
* 5 Firefighting measures<br />
Extinguishing media<br />
Suitable extinguishing agents:<br />
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.<br />
Special hazards arising from the substance or mixture None known<br />
Advice for firefighters No special advice.<br />
Protective equipment: No special measures required.<br />
* 6 Accidental release measures<br />
Personal precautions, protective equipment and emergency procedures Not required.<br />
Environmental precautions: No special measures required.<br />
Methods and material for containment and cleaning up:<br />
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).<br />
Reference to other sections<br />
No dangerous substances are released.<br />
See Section 7 for information on safe handling<br />
See Section 13 for disposal information.<br />
(Contd. of page 1)<br />
AU<br />
(Contd. on page 3)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 3/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP, 10mM<br />
* 7 Handling and storage<br />
Handling<br />
Precautions for safe handling No special measures required.<br />
Information about fire - and explosion protection: The product is not flammable<br />
Conditions for safe storage, including any incompatibilities<br />
Storage<br />
Requirements to be met by storerooms and receptacles: No special requirements.<br />
Information about storage in one common storage facility: Not required.<br />
Further information about storage conditions: None.<br />
Specific end use(s) No further relevant information available.<br />
8 Exposure controls/personal protection<br />
(Contd. of page 2)<br />
Additional information about design of technical facilities: No further data; see item 7.<br />
Control parameters<br />
Ingredients with limit values that require monitoring at the workplace:<br />
The product does not contain any relevant quantities of materials with critical values that have to be monitored at<br />
the workplace.<br />
Additional information: The lists valid during the making were used as basis.<br />
Exposure controls<br />
Personal protective equipment<br />
General protective and hygienic measures<br />
The usual precautionary measures are to be adhered to when handling chemicals.<br />
Respiratory protection: Not required.<br />
Protection of hands:<br />
Protective gloves.<br />
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation<br />
Material of gloves:<br />
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and<br />
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance<br />
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.<br />
Penetration time of glove material:<br />
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be<br />
observed.<br />
Eye protection: Goggles recommended during refilling.<br />
* 9 Physical and chemical properties<br />
Information on basic physical and chemical properties<br />
General Information<br />
Appearance:<br />
Form: Fluid<br />
Colour: Colourless<br />
Odour: Characteristic<br />
Odour threshold: Not determined.<br />
pH-value at 20°C (68 °F): 7.5<br />
(Contd. on page 4)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 4/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP, 10mM<br />
Change in condition<br />
Melting point/Melting range: 0°C (32 °F)<br />
Boiling point/Boiling range: undetermined<br />
Flash point: Not applicable<br />
Flammability (solid, gaseous) Not applicable.<br />
Ignition temperature:<br />
Decomposition temperature: Not determined.<br />
Self-igniting: Product is not selfigniting.<br />
Danger of explosion: Product does not present an explosion hazard.<br />
Explosion limits:<br />
Lower: Not determined.<br />
Upper: Not determined.<br />
Vapour pressure: Not determined.<br />
Density: Not determined<br />
Relative density Not determined.<br />
Vapour density Not determined.<br />
Evaporation rate Not determined.<br />
Solubility in / Miscibility with<br />
Water: Not miscible or difficult to mix<br />
Partition coefficient (n-octanol/water): Not determined.<br />
Viscosity:<br />
dynamic: Not determined.<br />
kinematic: Not determined.<br />
Solvent content:<br />
Organic solvents: 0.0 %<br />
Water: 99.6 %<br />
Other information No further relevant information available.<br />
* 10 Stability and reactivity<br />
Reactivity<br />
Chemical stability<br />
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.<br />
Possibility of hazardous reactions No dangerous reactions known<br />
Conditions to avoid No further relevant information available.<br />
Incompatible materials: No further relevant information available.<br />
Hazardous decomposition products: No dangerous decomposition products known<br />
11 Toxicological information<br />
Information on toxicological effects<br />
Acute toxicity:<br />
LD/LC50 values relevant for classification: No data available<br />
(Contd. of page 3)<br />
(Contd. on page 5)<br />
AU
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 5/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP, 10mM<br />
Primary irritant effect:<br />
on the skin: No irritant effect.<br />
on the eye: Irritating effect.<br />
Sensitization: No sensitizing effects known.<br />
* 12 Ecological information<br />
Toxicity<br />
Aquatic toxicity: Not harmful to the aquatic environment<br />
Persistence and degradability Not available<br />
Behaviour in environmental systems:<br />
Bioaccumulative potential Not known<br />
Mobility in soil No further relevant information available.<br />
Ecotoxical effects:<br />
Remark: Not available<br />
Additional ecological information:<br />
General notes: Generally not hazardous for water.<br />
Results of PBT and vPvB assessment<br />
PBT: Not applicable.<br />
vPvB: Not applicable.<br />
Other adverse effects No further relevant information available.<br />
13 Disposal considerations<br />
(Contd. of page 4)<br />
Waste treatment methods<br />
Recommendation<br />
Disposal should be in accordance with applicable regional, national and local laws and regulations.<br />
Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional<br />
handling information and protection of employees.<br />
Uncleaned packaging:<br />
Recommendation: Disposal must be made according to official regulations.<br />
* 14 Transport information<br />
UN-Number None<br />
UN proper shipping name None<br />
Transport hazard class(es) None<br />
Packing group None<br />
Environmental hazards:<br />
Marine pollutant: No<br />
Special precautions for user Not applicable.<br />
Transport in bulk according to Annex II of<br />
MARPOL73/78 and the IBC Code Not applicable.<br />
AU<br />
(Contd. on page 6)
35.0.2<br />
Safety data sheet<br />
according to 1907/2006/EC, Article 31<br />
Page 6/6<br />
Printing date 18.10.2012 Revision: 16.10.2012<br />
Trade name: ADP, 10mM<br />
15 Regulatory information<br />
Safety, health and environmental regulations/legislation specific for the substance or mixture<br />
Australian Inventory of Chemical Substances<br />
All ingredients are listed.<br />
National regulations<br />
Waterhazard class: Generally not hazardous for water.<br />
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.<br />
16 Other information<br />
(Contd. of page 5)<br />
This information is based on our present knowledge. However, this shall not constitute a guarantee for any<br />
specific product features and shall not establish a legally valid contractual relationship.<br />
Department issuing <strong>MSDS</strong>:<br />
<strong>Promega</strong> Corporation<br />
Safety Department<br />
2800 Woods Hollow Road<br />
Madison, WI 53711<br />
U.S.A.<br />
Abbreviations and acronyms:<br />
RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the<br />
International Transport of Dangerous Goods by Rail)<br />
ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International<br />
Carriage of Dangerous Goods by Road)<br />
GHS: Globally Harmonized System of Classification and Labelling of Chemicals<br />
* Data compared to the previous version altered.<br />
AU