Kit components 10/19/2012 Product code Description ... - Promega

More documents

Recommendations

Info

35.0.2 Safety data sheet according to 1907/2006/EC, Article 31 Page 4/7 Printing date 19.10.2012 Revision: 19.10.2012 Trade name: Lysis Buffer 8 Exposure controls/personal protection (Contd. of page 3) Additional information about design of technical facilities: No further data; see item 7. Control parameters Ingredients with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Additional information: The lists valid during the making were used as basis. Exposure controls Personal protective equipment General protective and hygienic measures Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin. Pregnant women should strictly avoid inhalation or skin contact. Do not eat or drink while working. Clean skin thoroughly immediately after handling the product. Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Protection of hands: Protective gloves. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. Eye protection: Tightly sealed goggles. 9 Physical and chemical properties Information on basic physical and chemical properties General Information Appearance: Form: Fluid Colour: Colourless Odour: Characteristic Odour threshold: Not determined. pH-value at 20°C: 6,4 Change in condition Melting point/Melting range: undetermined Boiling point/Boiling range: undetermined Flash point: > 100°C Flammability (solid, gaseous) Not applicable. (Contd. on page 5) SG
35.0.2 Safety data sheet according to 1907/2006/EC, Article 31 Page 5/7 Printing date 19.10.2012 Revision: 19.10.2012 Trade name: Lysis Buffer Ignition temperature: Decomposition temperature: Not determined. Self-igniting: Product is not selfigniting. Danger of explosion: Product does not present an explosion hazard. Explosion limits: Lower: Not determined. Upper: Not determined. Vapour pressure: Not determined. Density: Not determined Relative density Not determined. Vapour density Not determined. Evaporation rate Not determined. Solubility in / Miscibility with Water: Not miscible or difficult to mix Partition coefficient (n-octanol/water): Not determined. Viscosity: dynamic: Not determined. kinematic: Not determined. Solvent content: Organic solvents: 0,0 % Water: 25,1 % Other information No further relevant information available. * 10 Stability and reactivity Reactivity Chemical stability Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. Possibility of hazardous reactions Reacts with strong acids and oxidizing agents Conditions to avoid No further relevant information available. Incompatible materials: No further relevant information available. Hazardous decomposition products: No dangerous decomposition products known 11 Toxicological information Information on toxicological effects Acute toxicity: LD/LC50 values relevant for classification: 50-01-1 guanidinium chloride Oral LD50 475 mg/kg (Rat) Irritation of eyes acute 500 mg (Rabbit) 57-13-6 urea Oral LD50 8471 mg/kg (Rat) (Contd. of page 4) (Contd. on page 6) SG
Page 1: 10/19/2012 Product code Description
Page 4 and 5: 35.0.2 Safety data sheet according
Page 56 and 57:
35.0.2 Safety data sheet according
Page 58:
35.0.2 Safety data sheet according
show all

Kit components 10/19/2012 Product code Description ... - Promega

Create successful ePaper yourself

Delete template?

Save as template?