PDF Catalogue in English - S-GARD

SWISSGUARD Overtrousers
EN 469:2005 2/2/2,
• Comfort braces system, wider on the shoulders and padded with upper fabric;
integrated elastic components at the back, tilting buckles and belt band for
continuous quick adjustment.
• Back of trousers pulled up higher with PA padding made of PRX-9000;
channel-like insertion
• Additional thermoinsulation in the waist area
• Two side openings with flap and Velcro fastening plus additional inside
pocket bag behind the membrane (water-protected)
• Two side bellows pockets with flap and Velcro fastening, on the right
with an additional knife pocket and stiffened flaps
• Large knee pads with two-layer para-aramid felt (500 g/m2 ) fixed onto the
overtrousers, covered with silicone-carbon-coated, flame-retardant, wear
and abrasion resistant black KEVLAR ® material
• Long step-in gusset at bottom of trouser legs, completed through cover panel,
closable with hook and frieze strip
• Trouser leg ends with additional Velcro tape for width adjustment
Layer build-up: Upper fabric type 812: NOMEX ® Comfort antistatic Ripstop
with KEVLAR ® grid, 190 g/m 2 • Moisture barrier: GORE-TEX ® Fireblocker •
Insulation: Vilene ® flame-retardant water entanglement, 55 g/m 2 • Lining:
NOMEX ® viscose FR 130 g/m 2
Order number:
28853 812 360 red-black
Available sizes:
S-XXL, short and long sizes accordingly
Installation instructions for the Drag Rescue Device.
S-GARD ® Manufacturers by Tradition.
Please note the product information included with the garment!
NNEEWW!!
OVERTROUSERS
SWISSGUARD
1. Open the zips of the side pockets. 2. Open the repair aperture. 3. At the back of the jacket, you will find the
welt opening for the DRD.
4. Introduce the harness in both directions. 5. Pull the harness through up to the
opening of the side pockets.
6. Pull the snap hook through the
end loops.
13