2009 Products Guide - Roppe Corporation
2009 Products Guide - Roppe Corporation
2009 Products Guide - Roppe Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
healthcare education hospitality corporate<br />
<strong>2009</strong> products guide
table of contents<br />
2 table of contents<br />
4 color<br />
8 ecoeffects ®<br />
10 safety compliance<br />
12 pinnacle rubber base<br />
13 alphabase ®<br />
14 basemates ® stackable trim molding system<br />
16 pinnacle plus wall base<br />
17 rubber corner blocks<br />
18 visuellé ®<br />
wall base<br />
20 700 series wall base | vinyl base<br />
22 dimensions rubber tile<br />
24 raised design rubber tile<br />
26 smooth | marbleized rubber tile<br />
28 safeTcork ®<br />
slip resistant rubber tile and tread<br />
30 fiesta ®<br />
rubber tile and tread<br />
32 designer’s choice ®<br />
rubber tile<br />
34 spike/skate resistant tile<br />
35 metal treads<br />
36 recoil fitness flooring<br />
38 tuflex ®<br />
recycled rubber tile<br />
40 rop-cord ®<br />
rubber tile<br />
42 wood naturals solid vinyl tile<br />
44 safeTcork ®<br />
vinyl tile<br />
46 esd static control vinyl flooring<br />
48 rubber stair treads<br />
52 vinyl stair treads<br />
54 rubber accessories<br />
58 vinyl accessories<br />
60 subfloor leveler<br />
62 adhesives<br />
64 product specifications<br />
79 warranty & contact information<br />
2 table of contents<br />
<strong>Roppe</strong> <strong>Corporation</strong> offers to<br />
you our new Quick 6. These<br />
are the 6 most important<br />
features and benefits of each<br />
product brand located within<br />
each product segment and<br />
on our Web site.
why choose <strong>Roppe</strong>?<br />
<strong>Roppe</strong> –<br />
Proven. Flooring. Experiences.<br />
Of course, if you have been a<br />
<strong>Roppe</strong> distributor partner or<br />
employee for any time, that<br />
answer is easily given.<br />
However, the answer may vary slightly depending on<br />
what position you hold within the organization. But<br />
what if you are using <strong>Roppe</strong> products for the first time,<br />
or working with the local distributor for the first time?<br />
Choosing <strong>Roppe</strong> means that you are choosing to<br />
work with a product partner that is Proven. <strong>Roppe</strong> is<br />
celebrating over 50 years as a leading manufacturer<br />
in the commercial flooring industry. Our company<br />
is family owned, and is a very integral part of the<br />
small Midwestern town of Fostoria, Ohio, where our<br />
headquarters are located. The longevity of our company<br />
is a testament to the employees that live local to this<br />
community and take pride in every product that is<br />
manufactured, shipped and delivered to our end-users.<br />
Our products have stood the test of time, and our<br />
service and commitment to the commercial flooring<br />
industry is proven.<br />
Choosing <strong>Roppe</strong> means that you are choosing to work<br />
with a product partner that has centralized its product<br />
mix around Flooring. The commercial flooring industry<br />
has many manufacturers. <strong>Roppe</strong> realizes the importance<br />
of having a range of products readily available to the<br />
end-users, so the job can be completed in a timely<br />
manner. The need to work with several suppliers is<br />
usually unnecessary, as we offer all of the products that<br />
are needed to provide a clean, finished, professionally<br />
designed interior space. <strong>Roppe</strong> is flooring.<br />
Choosing <strong>Roppe</strong> means that you are choosing to work<br />
with a product partner that has many positive Experiences<br />
from within the field to share. When you think of the last<br />
job you installed or sold, do you have a positive and<br />
satisfying recollection of the vendor that you worked<br />
with? When you choose <strong>Roppe</strong>, you will always finish the<br />
project knowing that you partnered with one of the best<br />
manufacturers that the commercial flooring industry has<br />
to offer! The entire <strong>Roppe</strong> team works to provide you<br />
with the added benefits of innovative products, great<br />
customer service, flexible logistics requirements and<br />
the industry’s first Single Price Point system! All colors<br />
from Black to Pink – one price per product in our major<br />
product lines: wall base, tile, treads and accessories.<br />
Being the easiest company in the commercial flooring<br />
industry to do business with is a long-standing goal for<br />
the entire <strong>Roppe</strong> team. We invite you to share in the<br />
Proven. Flooring. Experiences. that make <strong>Roppe</strong> the<br />
partner you want to work with!<br />
Visit us on the Web at roppe.com, or call our helpful<br />
customer service staff at 1.800.537.9527.<br />
Dependability – all the time, every time. 3
4 color<br />
| T I L E , T R E A D A N D T S , T P A N D T V W A L L B A S E |<br />
100<br />
black<br />
178<br />
pewter<br />
110<br />
brown<br />
191<br />
camel<br />
131<br />
bisque<br />
633<br />
gingko<br />
118<br />
peacock<br />
627<br />
mariner<br />
615<br />
cream<br />
177<br />
steel blue<br />
147<br />
light brown<br />
125<br />
fig<br />
629<br />
golden<br />
628<br />
shamrock<br />
169<br />
hunter green<br />
618<br />
aubergine<br />
626<br />
tangerine<br />
194<br />
burnt umber<br />
150<br />
dark gray<br />
619<br />
java<br />
171<br />
sandstone<br />
127<br />
harvest yellow<br />
195<br />
light gray<br />
146<br />
turquoise<br />
621<br />
merlin<br />
617<br />
terracotta<br />
12<br />
616<br />
platinum<br />
148<br />
steel gray<br />
181<br />
russet<br />
130<br />
buckskin<br />
631<br />
sahara<br />
116<br />
moss<br />
606<br />
tropical blue<br />
620<br />
plum<br />
188<br />
brick<br />
193<br />
black brown<br />
182<br />
toffee<br />
198<br />
ivory<br />
622<br />
brass<br />
634<br />
olive<br />
187<br />
blue<br />
175<br />
slate<br />
185<br />
burgundy<br />
120<br />
tan<br />
123<br />
charcoal<br />
623<br />
nutmeg<br />
632<br />
flax<br />
625<br />
bronze<br />
630<br />
pine<br />
154<br />
salem blue<br />
137<br />
cinnabar<br />
133<br />
golden honey<br />
174<br />
smoke<br />
114<br />
lunar dust<br />
624<br />
chameleon<br />
184<br />
almond<br />
124<br />
taupe<br />
113<br />
pistachio<br />
165<br />
colonial blue<br />
186<br />
red<br />
167<br />
spice<br />
129<br />
dolphin<br />
197<br />
iceberg<br />
140<br />
fawn<br />
170<br />
white<br />
122<br />
natural<br />
160<br />
forest green<br />
139<br />
deep navy<br />
613<br />
azalea<br />
161<br />
snow
color<br />
70 colors. One price. It’s your choice.<br />
Our updated color palette for Rubber Tile, Tread and TS, TP<br />
and TV wall base includes forecasted colors as well as the most<br />
popular hues being used in design today.<br />
SafeTcork ® Vinyl Tile and the Fiesta ® Rubber Tile and Tread lines have also been refreshed to coordinate with the new<br />
palette of colors. Visuellé ® and Accessory lines are now available in the 30 most popular colors. When you consider<br />
that <strong>Roppe</strong> also offers unique products such as our SafeTcork ® Rubber Tile and Tread and a new subtle marbled look<br />
that combine to create over 200 colorways that work interchangeably to create beautiful spaces where we work, learn,<br />
shop, live or recover from illness – is there an easier system to select products from? All of this, plus our revolutionary<br />
Single Price Point pricing structure that allows you the choice to select colors based on your design not your budget!<br />
single price point<br />
What could be simpler? Most major <strong>Roppe</strong> products lines are available at a Single Price Point. So opt for any<br />
color. It’s one price for all colors within those products lines. Look for this symbol noting <strong>Roppe</strong>’s Single Price<br />
Point product lines.<br />
| R U B B E R A N D V I N Y L A C C E S S O R I E S |<br />
100<br />
black<br />
174<br />
smoke<br />
631<br />
sahara<br />
139<br />
deep navy<br />
177<br />
steel blue<br />
110<br />
brown<br />
195<br />
light gray<br />
621<br />
merlin<br />
150<br />
dark gray<br />
182<br />
toffee<br />
116<br />
moss<br />
185<br />
burgundy<br />
193<br />
black brown<br />
140<br />
fawn<br />
634<br />
olive<br />
137<br />
cinnabar<br />
114<br />
lunar dust<br />
191<br />
camel<br />
118<br />
peacock<br />
617<br />
terracotta<br />
178<br />
pewter<br />
171<br />
sandstone<br />
169<br />
hunter green<br />
167<br />
spice<br />
194<br />
burnt umber<br />
198<br />
ivory<br />
187<br />
blue<br />
175<br />
slate<br />
184<br />
almond<br />
165<br />
colonial blue<br />
1.800.537.9527 | roppe.com<br />
5
6 color<br />
| S A F E T C O R K ® |<br />
100<br />
black<br />
178<br />
pewter<br />
110<br />
brown<br />
191<br />
camel<br />
131<br />
bisque<br />
633<br />
gingko<br />
118<br />
peacock<br />
627<br />
mariner<br />
615<br />
cream<br />
177<br />
steel blue<br />
147<br />
light brown<br />
125<br />
fi g<br />
629<br />
golden<br />
628<br />
shamrock<br />
169<br />
hunter green<br />
618<br />
aubergine<br />
626<br />
tangerine<br />
194<br />
burnt umber<br />
150<br />
dark gray<br />
619<br />
java<br />
171<br />
sandstone<br />
127<br />
harvest yellow<br />
195<br />
light gray<br />
146<br />
turquoise<br />
621<br />
merlin<br />
617<br />
terracotta<br />
616<br />
platinum<br />
148<br />
steel gray<br />
181<br />
russet<br />
130<br />
buckskin<br />
631<br />
sahara<br />
116<br />
moss<br />
606<br />
tropical blue<br />
620<br />
plum<br />
188<br />
brick<br />
193<br />
black brown<br />
182<br />
toffee<br />
198<br />
ivory<br />
622<br />
brass<br />
634<br />
olive<br />
187<br />
blue<br />
175<br />
slate<br />
185<br />
burgundy<br />
120<br />
tan<br />
123<br />
charcoal<br />
623<br />
nutmeg<br />
632<br />
fl ax<br />
625<br />
bronze<br />
630<br />
pine<br />
154<br />
salem blue<br />
137<br />
cinnabar<br />
133<br />
golden honey<br />
174<br />
smoke<br />
114<br />
lunar dust<br />
624<br />
chameleon<br />
184<br />
almond<br />
124<br />
taupe<br />
113<br />
pistachio<br />
165<br />
colonial blue<br />
186<br />
red<br />
167<br />
spice<br />
129<br />
dolphin<br />
197<br />
iceberg<br />
140<br />
fawn<br />
170<br />
white<br />
122<br />
natural<br />
160<br />
forest green<br />
139<br />
deep navy<br />
613<br />
azalea<br />
161<br />
snow
| F I E S T A ® |<br />
409<br />
oscuro<br />
404<br />
niebla<br />
407<br />
tierra<br />
415<br />
morado<br />
| S A F E T C O R K ® F I E S T A ® |<br />
409<br />
oscuro<br />
404<br />
niebla<br />
407<br />
tierra<br />
415<br />
morado<br />
| S A F E T C O R K ® V I N Y L |<br />
617<br />
terracotta<br />
137<br />
cinnabar<br />
w198<br />
white ivory<br />
631<br />
sahara<br />
150<br />
dark gray<br />
198<br />
ivory<br />
401<br />
camello<br />
412<br />
musgo<br />
401<br />
camello<br />
412<br />
musgo<br />
116<br />
moss<br />
193<br />
black brown<br />
154<br />
salem blue<br />
410<br />
marengo<br />
411<br />
fiel<br />
410<br />
marengo<br />
411<br />
fiel<br />
197<br />
iceberg<br />
100<br />
black<br />
w154<br />
white salem<br />
blue<br />
414<br />
rojo<br />
416<br />
avahar<br />
414<br />
rojo<br />
416<br />
avahar<br />
w197<br />
white iceberg<br />
w100<br />
white black<br />
413<br />
amarillo<br />
408<br />
marron<br />
413<br />
amarillo<br />
408<br />
marron<br />
194<br />
burnt umber<br />
621<br />
merlin<br />
1.800.537.9527 | roppe.com<br />
7
8<br />
ecoeffects®<br />
F R I E N D L Y F L O O R I N G P R O D U C T S<br />
earning LEED ® credits<br />
LEED ® is the cutting-edge system for certifying the<br />
world’s greenest buildings. EcoEffects ® brand products<br />
may contribute to certification credits for these<br />
LEED programs: NC (new construction) and<br />
CI (commercial interiors). <strong>Products</strong> that meet the<br />
following qualifications are indicated throughout<br />
this literature.<br />
L E G E N D<br />
Look for this symbol noting <strong>Roppe</strong>’s<br />
EcoEffects ® brand products.<br />
MR 4.1 NC/CI Recycled Content: 10%<br />
(post-consumer + 1/2 pre-consumer)<br />
MR 4.2 NC/CI Recycled Content: 20%<br />
(post-consumer + 1/2 pre-consumer)<br />
MR 5.1 NC/CI Regional Materials: 20%<br />
manufactured regionally<br />
MR 5.2 NC/CI Regional Materials: 10%<br />
Extracted and manufactured regionally<br />
MR 6 NC/CI Rapidly Renewable<br />
Materials<br />
EQ 4.1 NC/CI Low-Emitting Materials:<br />
adhesives and sealants<br />
Your link to <strong>Roppe</strong> products and LEED ® documentation.<br />
For more information, please visit: www.roppe.com.<br />
ecoeffects ®<br />
the collaborative<br />
for high<br />
performance schools<br />
The Collaborative for High Performance Schools (CHPS)<br />
believes that healthy, energy-efficient learning environments<br />
promote positive educational experiences. Because <strong>Roppe</strong><br />
shares this philosophy, we’ve become a participating member<br />
in the CHPS program, submitting our product line for emissions<br />
testing in accordance with their guidelines.<br />
The following products meet CHPS criteria:<br />
• Pinnacle Rubber Base, Pinnacle Plus Wall Base,<br />
BaseMates ® Stackable Trim Molding System, Rubber<br />
Corner Blocks, 700 Series Wall Base, Vinyl Base,<br />
Visuellé ® Wall Base, AlphaBase ®<br />
• Fiesta ® Rubber Tile & Tread, SafeTcork ® Fiesta ® Tile & Tread<br />
• SafeTcork ® Rubber Tile & Tread, SafeTcork ® Vinyl Tile<br />
• ESD Static Control Vinyl Tile<br />
• Rubber Floor Tile, Spike/Skate Resistant Tile,<br />
Designer’s Choice ® Tile<br />
• Recoil Fitness Flooring<br />
• Tuflex ® Recycled Rubber Tile<br />
• Rubber Stair Tread, Vinyl Stair Tread<br />
• Rubber Accessories, Vinyl Accessories<br />
• Select <strong>Roppe</strong> Adhesives<br />
For a complete updated listing, please visit www.CHPS.net.
At <strong>Roppe</strong>, we’ve consciously<br />
chosen to be part of the solution.<br />
That means we’re not just committed to making better products – we’re dedicated<br />
to making a positive impact on the environment as well. Our “green” products<br />
meet high environmental standards and may contribute to the U.S. Green Building<br />
Council’s LEED ® Green Building Certification System. From tiles and treads to wall<br />
base and adhesives, our EcoEffects ® products meet high environmental standards<br />
without compromising color selection, performance, durability or style.<br />
1.800.537.9527 | roppe.com<br />
9
10 safety<br />
special safety applications and<br />
code compliance<br />
<strong>Roppe</strong> products meet today’s stringent code requirements. Look for<br />
these symbols throughout this brochure for product compliance information.<br />
L E G E N D<br />
Complies with Americans with Disabilities<br />
Act regulations.<br />
Meets flammability requirements of the National<br />
Fire Protection Association Life-Safety Code 101.<br />
Meets building code standards from American<br />
National Standards Institute.<br />
Meets photo-luminescent escape routing<br />
standards in DIN 67510.<br />
safety<br />
S P E C I A L S A F E T Y A P P L I C A T I O N S & C O D E C O M P L I A N C E<br />
roppe safeTmax ® solutions<br />
SafeTmax ® is our brand to denote recommended products that promote increased safety in the environments<br />
where people learn, shop, recover from illness, work or live. Increasing safety in an environment promotes a<br />
reduction in associated costs such as lost work hours, liability and decreased productivity.<br />
• Non-skid rubber tile and tread<br />
products that reduce slip/fall<br />
incidences on floors and stairways.<br />
• AlphaBase ® , a Pinnacle Rubber Base<br />
featuring the ability to add safety<br />
signage where needed in schools<br />
hospitals, dorms and public buildings.<br />
• SafeTcork ® Rubber Tile and Tread and<br />
Vinyl Tile products developed for added<br />
visual appeal and the benefit of slip<br />
resistance that increases 20% over the<br />
standard COF for rubber & vinyl flooring.<br />
• Rubber and Vinyl Accessory transitions<br />
designed for minimal reaction as one<br />
travels from surface to surface.<br />
• ADA compliant products that aid<br />
visually impaired persons as they<br />
travel through a given facility or space.<br />
• ESD Static Control Vinyl Flooring<br />
promotes the reduction of static<br />
electricity in sensitive environments<br />
such as clean rooms where the fiber<br />
optic, electronic and pharmaceutical<br />
items are produced.<br />
Meets requirements of Title 24 Section 3306(r)<br />
of the Disabled Access Regulations for the<br />
State of California.<br />
Meets standards of American Society<br />
for Testing and Materials.<br />
Product is recyclable.<br />
Product is PVC free.
1.800.537.9527 | roppe.com<br />
11
12<br />
pinnacle<br />
pinnacle<br />
R U B B E R B A S E<br />
No matter what the project,<br />
PVC free <strong>Roppe</strong> Pinnacle<br />
rubber base is ideal for the job.<br />
Pinnacle is the professional’s choice because this 100% type TS<br />
vulcanized rubber base is highly durable and extremely fl exible,<br />
allowing for easy installation around columns, corners and<br />
architectural curves.<br />
pinnacle<br />
rubber<br />
base<br />
PINNACLE RUBBER BASE FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% natural rubber, a renewable resource, which may contribute to the<br />
LEED ® Green Building Certifi cation System and meets CHPS criteria.<br />
> The widest range of sizes available: 2-1/2", 3", 3-1/2", 4", 4-1/2", 5", 5-1/2"<br />
and 6". Profi le options in standard 4" include cove, no toe, butt toe, long toe<br />
(1") and sanitary base (2").<br />
> Maintains a smooth and attractive appearance. Will not shrink, gap or separate<br />
from the wall.<br />
> NEW! <strong>Roppe</strong> Rubber Corner Blocks are recommended. Inside and outside<br />
profi les available.<br />
> All colors inherent throughout and available at a Single Price Point.
alphabase<br />
®<br />
When the project calls for signage combined<br />
with a durable SBR base, <strong>Roppe</strong> has the answer<br />
in AlphaBase ® wall base products.<br />
Ideal for safety applications, such as hallways and stairwells – anywhere<br />
clearly marked signage is a necessity – AlphaBase ® is an ideal choice for schools,<br />
hospitals, dorms and public buildings. Safety signage is standard, but custom<br />
signage is also available.<br />
1.800.537.9527 | roppe.com<br />
13
14<br />
basemates®<br />
S T A C K A B L E T R I M M O L D I N G S Y S T E M<br />
Attention to detail can certainly<br />
help transform a room.<br />
basemates<br />
BASEMATES FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% natural rubber, a renewable resource, which may contribute to<br />
the LEED ® Green Building Certifi cation System and meets CHPS criteria.<br />
> Stacking multiple layers of top trims allows height and design versatility in<br />
matching, complementary or contrasting color themes.<br />
> Available in four 1-1/8" shoe base profi les, four 3/4" and seven 1-3/4"<br />
sculptured top trims.<br />
> NEW! <strong>Roppe</strong> Rubber Corner Blocks are recommended. Inside and outside<br />
profi les available.<br />
> All colors are inherent throughout and available at a Single Price Point.<br />
top trims<br />
BO1 Top Trim 3/4" BO2 Top Trim 3/4"<br />
packaged 120' per carton packaged 120' per carton<br />
CO2 Top Trim 1-3/4" C2O Top Trim 1-3/4"<br />
packaged 120' per carton packaged 120' per carton<br />
basemates ®<br />
BOO Top Trim 3/4" BO3 Top Trim 3/4" CO1 Top Trim 1-3/4"<br />
packaged 120' per carton packaged 120' per carton packaged 120' per carton<br />
C22 Top Trim 1-3/4"<br />
packaged 120' per carton<br />
C21 Top Trim 1-3/4"<br />
packaged 120' per carton<br />
C23 Top Trim 1-3/4"<br />
packaged 120' per carton<br />
base shoes<br />
AO1 Base Shoe 1-1/8"<br />
packaged 120’ per carton<br />
AO2 Base Shoe 1-1/8"<br />
packaged 120’ per carton<br />
COO Top Trim 1-3/4"<br />
packaged 120’ per carton<br />
AOO Base Shoe 1-1/8"<br />
packaged 120’ per carton<br />
AO3 Base Shoe 1-1/8"<br />
packaged 120’ per carton<br />
Make ordinary wall base, extraordinary!<br />
<strong>Roppe</strong>’s new patent-pending wall base<br />
system allows you to create your own<br />
designs using as few or as many of the<br />
15 components as you choose, or simply<br />
extend the life of existing wall base by<br />
adding a top trim to hide unsightly<br />
paint lines.
detail<br />
That’s why sculpted wall base designs are<br />
so popular in today’s high-end projects.<br />
And now there’s a new option for designers and installers on<br />
tighter budgets. With the patent-pending <strong>Roppe</strong> BaseMates ®<br />
stackable trim molding system, you can transform ordinary<br />
wall base into something special – by adding a custom look<br />
at a minimal cost.<br />
1.800.537.9527 | roppe.com<br />
15
#10<br />
profile height 4"<br />
packaged 60' per coil<br />
profile height 5-1/4"<br />
packaged 60' per coil<br />
#15<br />
#20<br />
profile height 4"<br />
packaged 120' per coil<br />
profile height 4-9/16"<br />
packaged 60' per coil<br />
1/4" thickness<br />
#25<br />
#30<br />
profile height 4"<br />
packaged 120' per coil<br />
16 pinnacle plus<br />
pinnacle<br />
plus<br />
W A L L B A S E<br />
profile height 4"<br />
packaged 60' per coil<br />
profile height 4"<br />
packaged 60' per coil<br />
#35<br />
profile height 4-9/16"<br />
packaged 60' per coil<br />
1/4" thickness<br />
#40<br />
profile height 4"<br />
packaged 120' per coil<br />
profile height 5”<br />
packaged 60’ per #45 coil<br />
profile height 5"<br />
packaged 60' per coil<br />
#50<br />
#60<br />
profile height 4"<br />
packaged 60' per coil<br />
profile height 4"<br />
packaged 60' per coil<br />
profile height 4"<br />
packaged 60' per coil<br />
profile height 5-1/2"<br />
packaged 60' per coil<br />
profile height 4"<br />
packaged 60' per coil<br />
#70<br />
#80<br />
#90<br />
#95<br />
#00<br />
The architectural lines of Pinnacle<br />
Plus wall base reveal <strong>Roppe</strong>’s keen<br />
attention to detail.<br />
Formulated with all of the same features and benefits<br />
that make Pinnacle rubber base the professional’s<br />
choice, Pinnacle Plus base gives the industry unique<br />
profiles and new options in design.<br />
pinnacle plus<br />
PINNACLE PLUS FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% natural rubber, a renewable resource, which may contribute to<br />
the LEED ® Green Building Certification System and meets CHPS criteria.<br />
> Available in 15 profiles, packaged in coils for seamless installations. Profiles<br />
range in heights from 4" to 5-1/2".<br />
> Inexpensive upgrade to standard wall base that adds visual appeal to any design.<br />
> NEW! <strong>Roppe</strong> Rubber Corner Blocks are recommended. Inside and outside<br />
profiles available.<br />
> All colors are inherent throughout and available at a Single Price Point.
corners<br />
inside corner outside corner<br />
The dreaded corner – it’s often viewed as the most<br />
difficult, costly and time-intensive element of any<br />
wall base installation.<br />
To resolve this issue, we’ve developed rubber corner blocks. These 100% PVC free,<br />
vulcanized and extruded corner blocks alleviate costly hand-scribing, wasted time and<br />
extra skilled craftsmen from the corner-forming process. These rubber corners also add<br />
durability because they are less likely to get damaged or detached during everyday use<br />
and maintenance of the interior space.<br />
1.800.537.9527 | roppe.com<br />
17
18<br />
visuellé ®<br />
visuellé®<br />
W A L L B A S E<br />
Our Visuellé ® Wall Base Solutions<br />
System gives you even more flexibility.<br />
Visuellé is available in two profile heights and, with our<br />
industry-leading 40 ft. rolls, Visuellé offers elegant style and<br />
seamless installations. Rubber corner blocks and mitered<br />
corners – pre-cut to fit a 90° cut of Visuellé wall base – make<br />
installations easier than ever, saving time and money on the<br />
job site. Choose from a range of 30 colors for a beautiful finish.<br />
visuellé<br />
VISUELLÉ FEATURES AND BENEFITS:<br />
> Durable TPR rubber sculpted product produced in 40' rolls that reduce joints for a<br />
seamless installation.<br />
> Available in a dynamic 7-3/4" height, designed to complement the very popular,<br />
original 4-1/2" profile.<br />
> Provides the look of custom-crafted woodwork, eliminating the nailing, sanding and<br />
priming associated with wood.<br />
> Natural flexibility conceals irregularities in floors, walls and corners (e.g., seam of floor<br />
and wall, bowing walls, etc.), and allows for installation around architectural curves.<br />
> NEW! <strong>Roppe</strong> Rubber Corner Blocks are recommended. Inside and outside<br />
profiles available. Mitered inside and outside corner option is also available.<br />
> All colors available at a Single Price Point.
simplicity<br />
Designed to set the standard for<br />
simplicity and efficiency.<br />
<strong>Roppe</strong> Visuellé ® Wall Base Solutions System includes two corner<br />
options to eliminate time wasted at the job site making challenging<br />
cuts on corners, plus two heights of the same popular design to<br />
complement any space.<br />
inside corner outside corner<br />
visuellé ® mitered corners<br />
1.800.537.9527 | roppe.com<br />
19
20<br />
700 series<br />
W A L L B A S E<br />
700 series | vinyl base<br />
700 series<br />
base<br />
700 SERIES BASE FEATURES AND BENEFITS:<br />
> TPR rubber compound resists scratches and abrasions, and won’t fade,<br />
crack or chip.<br />
> Contains 10% pre-consumer waste, which may contribute to the<br />
LEED ® Green Building Certification System and meets CHPS criteria.<br />
> Moderate flexibility due to its rubber/vinyl mix.<br />
> Thickness of 1/8" (3.175mm) helps hide wall irregularities.<br />
> Top-lip design helps fit tightly against the wall while a ribbed back<br />
provides positive adhesion.<br />
> All colors available at a Single Price Point.<br />
<strong>Roppe</strong>’s unique blend of thermoplastic<br />
rubber and vinyl makes the 700 Series<br />
an attractive and economical choice for<br />
a variety of applications. With its<br />
moderate pricing, our 700 Series wall<br />
base is an outstanding selection for<br />
any installation.<br />
vinyl base<br />
VINYL WALL BASE FEATURES AND BENEFITS:<br />
> Thermoplastic TV vinyl base.<br />
> Contains 10% pre-consumer waste, which may contribute to the<br />
LEED Green ® Building Certification System and meets CHPS criteria.<br />
> Won’t fade, crack or chip, and holds up well under tough conditions.<br />
> Available in standard 1/8" or .080" thicknesses.<br />
> Co-extruded top layer resists scuffs and scratches.<br />
> All colors available at a Single Price Point.
vinyl base<br />
Low cost and good looks highlight<br />
<strong>Roppe</strong>’s Type TV thermoplastic vinyl base.<br />
It’s extremely durable without sacrificing attractiveness, and very<br />
economical because it’s made from PVC vinyl.<br />
1.800.537.9527 | roppe.com<br />
21
22<br />
$ 5 $2<br />
rubber tile<br />
D I M E N S I O N S<br />
RUBBER<br />
VCT<br />
SHEET VINYL<br />
CARPET<br />
– HIGH GRADE<br />
$ 5<br />
$ 7<br />
$ 7<br />
5 years<br />
Initial installation<br />
10 years 15 years<br />
Life Cycle Chart<br />
$ 16<br />
$ 13<br />
$ 24<br />
$ 8<br />
7 1/2 YEARS 15 YEARS<br />
dimensions rubber tile<br />
$ 27<br />
$ 25<br />
$ 42<br />
All <strong>Roppe</strong> rubber tile combines<br />
functionality and good looks.<br />
It’s naturally slip resistant and provides outstanding underfoot<br />
comfort and noise reduction. Better yet, it’s easy to install and<br />
maintain. Plus, it’s PVC free.<br />
dimensions<br />
Industry studies have shown that flooring materials with a higher initial cost do not necessarily<br />
translate to a higher cost in the long run. In fact, findings indicate flooring materials with<br />
a higher initial cost will perform more cost effectively over many years. For example, while<br />
rubber flooring may cost more initially, the cost of maintaining it is lower. And because<br />
it’s extremely durable, it lasts a very long time. So, when examining long-term costs, it is<br />
important to consider the total cost of ownership. With the right information, you can help<br />
customers control costs – not just on the initial project, but also in the long run.<br />
DIMENSIONS TILE FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% natural rubber, a renewable resource, which may contribute<br />
to the LEED ® Green Building Certification System and meets CHPS criteria.<br />
> Available in 3 profiles: Crackle, Random and Stripe. Designed for high<br />
durability and ease of maintenance throughout the product life cycle.<br />
> Resists scuffing, gouging and cigarette scorching, as well as most chemicals<br />
and common substances.<br />
> Provides underfoot comfort, reduced noise from foot traffic and has an<br />
inherent slip resistance.<br />
> Available in solid colors only. All colors available at a Single Price Point.
dimensions<br />
983 | dimensions | random 982 | dimensions | crackle<br />
984 | dimensions | stripe<br />
1.800.537.9527 | roppe.com<br />
furniture courtesy of versteel.<br />
23
24<br />
rubber tile<br />
R A I S E D D E S I G N<br />
| L U G - B A C K V A N T A G E D E S I G N |<br />
Available in Vantage Design only. Our lug-back<br />
design allows for superior adhesion of the tile<br />
to the substrate to withstand extreme stress and<br />
shear loads from extra-heavy traffic.<br />
raised design rubber tile<br />
Slip resistance is enhanced by the<br />
excellent water drainage provided<br />
by our Raised Design rubber tile.<br />
Liquids are safely channeled off the walking surface. It’s<br />
highly durable and PVC free, and when compared to other<br />
types of flooring, rubber tile provides an unmatched level<br />
of cost-to-life-cycle benefit.<br />
raised<br />
design<br />
RAISED DESIGN RUBBER TILE FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% natural rubber, a renewable resource, which may contribute<br />
to the LEED ® Green Building Certification System and meets CHPS criteria.<br />
> Available in 7 profiles: Slate Design, Low Profile Raised Design, Textured<br />
Design, Raised Square Design, Raised Circular Vantage Profile, Hammered<br />
and Warning Tile Design. Designed for high durability and ease of<br />
maintenance throughout the product life cycle.<br />
> Resists scuffing, gouging and cigarette scorching, as well as most chemicals<br />
and common substances.<br />
> Provides underfoot comfort, reduced noise from foot traffic and has an<br />
inherent slip resistance.<br />
> All colors available at a Single Price Point.
durable<br />
991<br />
slate design<br />
995<br />
hammered design<br />
992<br />
low profile raised<br />
circular design<br />
996<br />
raised circular<br />
vantage design<br />
993<br />
textured design<br />
953<br />
warning tile design<br />
994<br />
raised square design<br />
1.800.537.9527 | roppe.com<br />
25
26<br />
rubber tile<br />
S M O O T H D E S I G N | M A R B L E I Z E D<br />
| P E R F O R M A N C E C O M P O U N D S |<br />
> Antifungal<br />
> Flame-Retardant<br />
> Oil/Grease Resistant<br />
Choose any of the added performance options<br />
you need. We can add to our rubber products the<br />
special performance compound of your choice to<br />
help you meet the challenges of any application or<br />
environment. Compatible with all <strong>Roppe</strong> rubber<br />
flooring colors and profiles.<br />
smooth | marbleized rubber tile<br />
Available in solid or marble color patterns,<br />
<strong>Roppe</strong> Smooth Finish Rubber Tile is a great<br />
choice for healthcare applications where<br />
rolling loads can be expected.<br />
Feature strips available in 1/2" x 24-1/2", 1" x 25" and<br />
2" x 26", smooth or textured patterns, can add drama<br />
to solid or marble floors.<br />
smooth/<br />
marbleized<br />
SMOOTH FINISH DESIGN RUBBER TILE FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% natural rubber, a newable resource, which may contribute to<br />
the LEED ® Green Building Ceretification System and meets CHPS criteria.<br />
> Stands up well to constant traffic from wheelchairs, shopping carts,<br />
luggage carriers or dollies and resists scuffing, gouging, cigarette<br />
scorching, most chemicals and common substances.<br />
> The most inexpensive, durable surface regarding length of life cycle<br />
and minimal maintenance.<br />
> Provides underfoot comfort, reduced noise from foot traffic and has<br />
an inherent slip resistance.<br />
> All colors available at a Single Price Point.
marble<br />
Choosing a marble finish over a solid finish<br />
provides added interest to any space while<br />
hiding minor dirt and debris.<br />
<strong>Roppe</strong> offers you not only coordinating color lines across all product categories,<br />
but improved color options in existing products such as our marble tile and tread<br />
that can be ordered in all raised design tile and tread profiles except Dimensions.<br />
1.800.537.9527 | roppe.com<br />
27
28<br />
safeTcork®<br />
S L I P R E S I S T A N T R U B B E R T I L E A N D T R E A D<br />
Cork is the bark of the Cork Oak Tree which<br />
has an average life span of 150-250 years. The<br />
cork is harvested in 9 year cycles. Our cork is<br />
obtained as pre-consumer waste from bottle cork<br />
manufacturers who grind the gaskets into the<br />
granules that are visible throughout the thickness<br />
of SafeTcork ® Rubber and Vinyl products.<br />
safeTcork ® rubber tile and tread<br />
The specially formulated blend of<br />
rubber and cork in our SafeTcork ® Slip<br />
Resistant Rubber Tile & Tread teams<br />
safety with a unique aesthetic appeal.<br />
The natural slip resistance of cork – a renewable<br />
resource – makes it an ideal choice for education<br />
settings, churches, assisted living facilities and<br />
multipurpose rooms.<br />
safeTcork<br />
rubber tile<br />
& tread<br />
SAFETCORK RUBBER TILE AND TREAD FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% pre-consumer waste cork and 10% natural rubber, a renewable<br />
resource, which may contribute to the LEED ® Green Building Certification<br />
System, and meets CHPS criteria.<br />
> Formulated from a unique combination of SBR rubber and cork.<br />
> Cork content improves slip-resistance when wet by 20% under ASTM D-2047<br />
(Modification) test methods.<br />
> Available in all rubber tile and tread profiles except Dimensions, and designed<br />
for high durability and ease of maintenance throughout the product life cycle.<br />
> Choose from solid colors and Fiesta patterns. Color is inherent throughout<br />
the product and available at a Single Price Point.
choices<br />
| S A F E T C O R K ® F I E S T A ® |<br />
409<br />
oscuro<br />
404<br />
niebla<br />
407<br />
tierra<br />
415<br />
morado<br />
color combinations<br />
fiesta ® name base color chips<br />
401<br />
camello<br />
412<br />
musgo<br />
410<br />
marengo<br />
401 camello 191 camel 170 white, 187 blue<br />
404 niebla 174 smoke 170 white, 187 blue<br />
407 tierra 194 burnt umber 130 buckskin, 170 white<br />
408 marron 193 black brown 174 smoke, 198 ivory<br />
409 oscuro 100 black 140 fawn, 150 dark gray<br />
410 marengo 150 dark gray 100 black, 170 white<br />
411 fiel 165 colonial blue 130 buckskin, 170 white<br />
412 musgo 116 moss 194 burnt umber, 198 ivory<br />
413 amarillo 631 sahara 100 black, 170 white<br />
414 rojo 137 cinnabar 140 fawn, 150 dark gray<br />
415 morado 621 merlin 100 black, 170 white<br />
416 avahar 617 terracotta 194 burnt umber, 198 ivory<br />
custom colors are available, minimum quantities may apply.<br />
411<br />
fiel<br />
414<br />
rojo<br />
416<br />
avahar<br />
413<br />
amarillo<br />
408<br />
marron<br />
1.800.537.9527 | roppe.com<br />
29
30<br />
fiesta ® rubber tile and tread<br />
fiesta®<br />
R U B B E R T I L E A N D T R E A D<br />
A favorite of designers, Fiesta ® is not only<br />
long-lasting, it’s also great looking and an<br />
excellent choice for custom projects.<br />
Fiesta ® colors coordinate with other <strong>Roppe</strong> products and<br />
can be mixed and matched with tile, treads, wall base and<br />
accessories. Let your imagination be your guide with<br />
beautiful, versatile and unique Fiesta products.<br />
fiesta tile<br />
& tread<br />
FIESTA TILE AND TREAD FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% post-industrial waste and 10% natural rubber, a renewable<br />
resource, which may contribute to the LEED ® Green Building Certification<br />
System, and meets CHPS criteria.<br />
> Colors coordinate with our other products, so you can mix and match<br />
with tile, tread, wall base and accessories. (Custom colors are available;<br />
minimum quantities may apply.)<br />
> Available in all rubber tile and tread profiles except Dimensions.<br />
> Unique flecked design helps hide dirt and debris between cleanings.<br />
> All colors available at a Single Price Point.<br />
color combinations<br />
fiesta ® name base color chips<br />
401 camello 191 camel 170 white, 187 blue<br />
404 niebla 174 smoke 170 white, 187 blue<br />
407 tierra 194 burnt umber 130 buckskin, 170 white<br />
408 marron 193 black brown 174 smoke, 198 ivory<br />
409 oscuro 100 black 140 fawn, 150 dark gray<br />
410 marengo 150 dark gray 100 black, 170 white<br />
411 fiel 165 colonial blue 130 buckskin, 170 white<br />
412 musgo 116 moss 194 burnt umber, 198 ivory<br />
413 amarillo 631 sahara 100 black, 170 white<br />
414 rojo 137 cinnabar 140 fawn, 150 dark gray<br />
415 morado 621 merlin 100 black, 170 white<br />
416 avahar 617 terracotta 194 burnt umber, 198 ivory<br />
custom colors are available, minimum quantities may apply.
custom<br />
We can help you make a school logo or<br />
corporate emblem part of your fl ooring design.<br />
Our custom capabilities enable us to create logo designs in a wide range of sizes<br />
and styles. We’ll provide design suggestions and a complete plan with cost estimates.<br />
Chances are your school or company colors are among our extensive range of standard<br />
colors, but we can formulate custom colors, too. Custom fl ooring logos can be created<br />
in most rubber and vinyl tile products.<br />
1.800.537.9527 | roppe.com<br />
furniture courtesy of versteel.<br />
31
designer’s<br />
choice®<br />
R U B B E R T I L E<br />
| A T T R A C T I V E |<br />
An attractive and semi-custom approach to<br />
flooring that incorporates Hammered or Textured<br />
Design tile with 11 geometric shapes that can be<br />
used in one of our 6 standard patterns or mixed<br />
and matched to create your own unique design.<br />
A great option in flooring for schools, retail areas,<br />
museums and so much more!<br />
32 designer’s choice ® rubber tile<br />
The design possibilities are almost<br />
limitless with Designer’s Choice ® .<br />
Its 11 geometric shapes make it an attractive option for<br />
personalized flooring applications, in spaces such as schools,<br />
retail areas, museums and more. Use one of our designs to<br />
make your flooring come alive, or create a unique look all<br />
your own with durable and attractive Designer’s Choice.<br />
designer’s<br />
choice<br />
DESIGNER‘S CHOICE FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% natural rubber, a renewable resource, which may contribute<br />
to the LEED ® Green Building Certification System, and meets CHPS criteria.<br />
> Available in our wide selection of 11 shapes and 70 rubber tile colors<br />
for nearly limitless options.<br />
> Made of 1/8" solid rubber, Textured, Hammered or Smooth design<br />
rubber tile profiles only.<br />
> Unique flooring system that adds design appeal with all of the<br />
benefits of rubber tile.<br />
> All colors available at a Single Price Point.
| D E S I G N E R ’ S C H O I C E ® S T A N D A R D P A T T E R N S |<br />
matrix 100 striata 102 nuevo 104<br />
tuscany 105 optic 110 basketweave 111<br />
| T H E 1 1 S H A P E S T H A T M A K E U P D E S I G N E R ’ S C H O I C E ® |<br />
12" x 12"<br />
left<br />
hand<br />
miter<br />
3" x 15"<br />
left<br />
hand<br />
miter<br />
3" x 15"<br />
right<br />
hand<br />
miter<br />
3" x 15"<br />
picket<br />
6" x 18"<br />
picket<br />
12" x 12"<br />
right hand<br />
miter<br />
12" x 12"<br />
12" x 12"<br />
19-11⁄16" x 19-11⁄16"<br />
6" x 12"<br />
9" x 9"<br />
6" x 6"<br />
1.800.537.9527 | roppe.com<br />
33
34<br />
100<br />
black<br />
174<br />
smoke<br />
spike/skate<br />
150<br />
dark gray<br />
139<br />
deep navy<br />
spike/<br />
skate<br />
R E S I S T A N T T I L E<br />
160<br />
forest green<br />
191<br />
camel<br />
An ideal flooring for sporting and<br />
recreational areas, <strong>Roppe</strong> Spike/Skate<br />
Resistant Tile stands up to wear and<br />
heavy use.<br />
Use it anywhere damage from skates, spikes or cleats is<br />
a concern. Its strength and durability make it perfect for<br />
ice arenas, locker room entrances and exits, and players’<br />
walkways to sports fields and ballparks.<br />
spike/skate<br />
SPIKE/SKATE RESISTANT TILE FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% natural rubber, a renewable resource, which may contribute to<br />
the LEED ® Green Building Certification System, and meets CHPS criteria.<br />
> Excellent wear resistance for high traffic areas.<br />
> Made of 9mm solid rubber with a textured design profile that resists scuffs,<br />
gouges, cuts, cigarette burns, and most chemicals and common substances.<br />
> The most inexpensive and durable surface regarding length of life cycle and<br />
minimal maintenance.<br />
> All 6 colors are available at a Single Price Point.
metal treads<br />
black - BLK yellow – YLW blue – BLU brown – BRN red – RED green – GRN gray – GRY<br />
metal<br />
stair<br />
treads<br />
ROPPE METAL TREAD FEATURES AND BENEFITS:<br />
> Constructed of heat-treated exterior-grade aluminum 6063T3, with an epoxy filled<br />
face that increases slip resistance and is resistant to marring, scratching and chipping.<br />
> Meets ADA guidelines for the visually impaired when contrasting colors are selected.<br />
> Factory pre-drilled and countersunk holes for a flush finish with mechanical fasteners.<br />
> Stocked in 9" nominal depths and 36" and 48" lengths. Nominal 7-1/2" and 11"<br />
depths available by special order.<br />
> Available in 7 colorfast solid colors or two-color combinations. Select from Black, Red,<br />
Yellow, Green, Blue, Gray or Brown and are all available at a Single Price Point.<br />
> Custom color matching is available and ideal to show off school or corporate<br />
branding colors.<br />
<strong>Roppe</strong> Metal Stair Treads<br />
are ideal for installation<br />
over both commercial<br />
and residential steps and<br />
landings.<br />
1.800.537.9527 | roppe.com<br />
35
36<br />
Recoil is available in standard thicknesses of<br />
5/32", 1/4", 3/8” and 1/2"<br />
recoil<br />
recoil<br />
F I T N E S S F L O O R I N G<br />
Multi-functional rubber flooring<br />
designed for use in residential,<br />
commercial or industrial applications<br />
where added comfort under foot<br />
is needed.<br />
<strong>Roppe</strong> Recoil tiles can be used on indoor or outdoor<br />
applications where enhanced walking comfort and<br />
slip resistance is desired. Square and interlocking tiles<br />
are 36" x 36" (91.4cm x 91.4cm), and rolls are 48" x<br />
49-1/2' (1.22m x 15.09m). Custom colors available upon<br />
request. Minimum quantities may apply.<br />
recoil<br />
RECOIL FITNESS FLOORING FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains post-industrial and post-consumer waste and may contribute to the<br />
LEED ® Green Building Certification System and meets CHPS criteria.<br />
> Custom colors available upon request. Minimum quantities may apply.<br />
> Outstanding sound and shock absorption.<br />
> Stocking program allows for immediate shipment of our most popular styles<br />
and colors.<br />
> Available in Black and Black with 7 standard <strong>Roppe</strong> color chips available<br />
at our Single Price Point.
ecoil<br />
100 black<br />
131 bisque<br />
Swatches represent standard 10% chip content.<br />
169 hunter green 186 red 198 ivory<br />
195 light gray 609 cobalt 603 sunflower<br />
1.800.537.9527 | roppe.com<br />
37
38<br />
tuflex ®<br />
tuflex®<br />
R E C Y C L E D R U B B E R T I L E<br />
Tuflex ® Rubber Flooring tiles for sports<br />
and commercial applications have been<br />
proven in the industry since 1957.<br />
Tuflex tiles are manufactured with a patented vulcanization<br />
process using predominantly recycled rubber. Square tiles are<br />
27" x 27" x 3/8" thick, and interlocking tiles are 27" x 27"<br />
x 3/8" thick. All tile patterns available in feature strips.<br />
tuflex<br />
> 27" x 27" Tuflex Rubber Tiles are manufactured at 3/8" gauge (square or interlocking<br />
edges) using a patented process of simultaneous vulcanization of two recycled rubber<br />
components into one solid product. Interlocking tiles are 27" x 27" nominal.<br />
> Contains 85%-95% post-consumer waste, which may contribute to the LEED ®<br />
Green Building Certification System, and meets CHPS criteria.<br />
> Safety – exceeds OSHA and ADA standards for excellent traction and durability.<br />
> Non-porous surface provides an excellent barrier to soil, spills, stains and odors.<br />
> Resilient anti-fatigue surface that is excellent for free weight/workout machine<br />
applications as well as rinks and animal care clinics.<br />
> The flooring choice for professional sports facilities that house the NFL, NHL, MLB,<br />
and NBA. Combine custom logo capabilities, and you have the most complete answer<br />
for your sports or commercial flooring needs.
| T U F L E X ® S P O R T S F L O O R I N G | T I TA N | 9 5 % P O S T- C O N S U M E R W A S T E |<br />
978<br />
pacific<br />
977<br />
natural<br />
976<br />
hunter<br />
982<br />
taupe<br />
970<br />
crimson<br />
| T U F L E X ® S P O R T S F L O O R I N G | S P A R T U S | 8 5 % P O S T- C O N S U M E R W A S T E |<br />
913<br />
charcoal<br />
880<br />
sunset<br />
914<br />
greystone<br />
753<br />
red brick<br />
916<br />
ash<br />
971<br />
moss<br />
758<br />
pecan<br />
031<br />
fiesta<br />
886<br />
terracotta<br />
990<br />
mirage<br />
981<br />
citrus<br />
901<br />
adobe<br />
911<br />
seabreeze<br />
950<br />
confetti<br />
849<br />
ebony<br />
| F E A T U R E S T R I P S |<br />
cardinal red<br />
sand beige<br />
williamsburg green<br />
royal blue<br />
pearl grey<br />
1.800.537.9527 | roppe.com<br />
39
40<br />
rop-cord ®<br />
rop-cord®<br />
R U B B E R T I L E<br />
Versatility and functionality are<br />
inherent throughout our line of<br />
Rop-Cord ® flooring.<br />
Tough and durable as well as environmentally friendly,<br />
it can be used indoors or outdoors. Rop-Cord‘s built-in<br />
anti-slip feature makes it practical for a variety of areas,<br />
including damp or wet spaces. So, it’s an ideal flooring for<br />
ramps, walk-off mats, concourses and foyers – anywhere<br />
moisture might pose a hazard to pedestrians.<br />
rop-cord<br />
ROP-CORD FEATURES AND BENEFITS:<br />
> Mother Nature-friendly and recyclable, made with 90% post-consumer waste from<br />
tires, which may contribute to the LEED ® Green Building Certification System.<br />
> Lifetime delamination warranty.<br />
> Nominal 3/8" thick non-vulcanized backed modular tile allows diverse patterns<br />
in 12" x 12" tiles and 12" x 30' rolls.<br />
> Easy maintenance – just vacuum and spot clean as needed. Outdoor applications<br />
can be hosed off and left to dry.<br />
> Meets ADA recommendations of COF for ramps and flat surfaces.<br />
> 4 color options: Pine, Crimson, Indigo and Earthtone.<br />
Note: When exposed to direct sunlight and other elements, discoloration will occur.
functional<br />
pine indigo crimson earthtone<br />
1.800.537.9527 | roppe.com<br />
41
42<br />
wood naturals<br />
wood<br />
naturals<br />
S O L I D V I N Y L T I L E<br />
When it comes to the natural look of<br />
real wood, nothing tops our North<br />
Coast Collection ® of Wood Naturals .<br />
<strong>Roppe</strong>’s industry-leading wear layer ensures the<br />
floor will maintain its original beauty – to stand<br />
the test of time.<br />
wood<br />
naturals<br />
WOOD NATURALS FEATURES AND BENEFITS:<br />
> Superior performance of 100% pure vinyl and a 10-year limited wear warranty.<br />
> Contains 10% post-industrial waste, which may contribute to the LEED ® Green<br />
Building Certification System.<br />
> 40 mil (1.02mm) wear layer exceeds ASTM F-1700 spec for commercial use by<br />
100%. Durable and resistant to wear, indentations, delamination and shrinking.<br />
> Full 1/8" (3.175mm) construction helps conceal subfloor imperfections and<br />
allows for flush installation with other 1/8" products.<br />
> Available in 3" x 36" (76.2mm x 914.4mm) planks or 12" x 12"<br />
(304.8mm x 304.8mm) and 18" x 18" (457.2mm 457.2mm) tile<br />
with a straight or beveled edge.<br />
> All colors/grains available at a Single Price Point.
eauty<br />
001<br />
tacoma cherry<br />
008<br />
newport maple<br />
002<br />
heritage walnut<br />
010<br />
antique walnut<br />
004<br />
bainbridge oak<br />
011<br />
golden maple<br />
005<br />
vantage oak<br />
012<br />
caramel ash<br />
Wood Naturals emulate the warmth and<br />
feel of real-wood flooring, without all the<br />
hassle of real-wood maintenance.<br />
Wood Naturals are available in a variety of styles, from<br />
cherry, walnut and oak to maple, ash and pecan.<br />
006<br />
camden oak<br />
013<br />
burnt pecan<br />
007<br />
greenwich maple<br />
014<br />
warm cherry<br />
1.800.537.9527 | roppe.com<br />
43
44<br />
safeTcork<br />
safeTcork®<br />
V I N Y L T I L E<br />
vinyl welding bead colors<br />
617 terracotta<br />
631 sahara<br />
116 moss<br />
197 iceberg<br />
194 burnt umber<br />
137 cinnabar<br />
150 dark gray<br />
193 black brown<br />
100 black<br />
621 merlin<br />
198 ivory<br />
154 salem blue<br />
24” x 24” and 36” x 36” available pre-grooved<br />
for heat weldable installations.<br />
SafeTcork ® solid vinyl tile is durable,<br />
versatile and easy to maintain, and<br />
comes with the natural slip resistance<br />
of cork, now with Options!<br />
Choose from any of the standard 12 colors on a white<br />
background - in any combination of 1, 2 or 3 chip<br />
colors - and create your own tile – what else could<br />
be better than limitless options?<br />
safeTcork<br />
vinyl tile<br />
SAFETCORK VINYL TILE FEATURES AND BENEFITS:<br />
> Contains 10% pre-consumer waste cork, a renewable resource, which may<br />
contribute to the LEED ® Green Building Certifi cation System, and meets<br />
CHPS criteria.<br />
> Cork content improves the slip resistance under ASTM D-2047 (Modifi cation)<br />
test methods, while built-in antimicrobial agents inhibit mold and mildew and<br />
meet ASTM G-21.<br />
> Withstands heavy equipment loads without permanent indentation, even under<br />
rolling load conditions up to 2,000 psi.<br />
> Available in .080" thick 12" x 12" (304.8mm x 304.8mm) and pre-grooved,<br />
heat weld 24" x 24" (61cm x 61cm) or 36" x 36" (91.4cm x 91.4cm) tiles for<br />
seamless installation with matching vinyl welding beads.<br />
> Flexible enough to fl ash cove during installation but can withstand extreme<br />
rolling loads up to 2,000 psi.<br />
> Color is inherent throughout the tile thickness and available at a Single Price Point.
617<br />
terracotta<br />
w197<br />
white iceberg<br />
193<br />
black brown<br />
w198<br />
white ivory<br />
631<br />
sahara<br />
194<br />
burnt umber<br />
100<br />
black<br />
198<br />
ivory<br />
116<br />
moss<br />
137<br />
cinnabar<br />
w100<br />
white black<br />
154<br />
salem blue<br />
197<br />
iceberg<br />
150<br />
dark gray<br />
621<br />
merlin<br />
w154<br />
white salem<br />
blue<br />
unique<br />
SafeTcork ® Vinyl Tile is great for<br />
installations that require minimal<br />
maintenance requirements as<br />
it easily buffs to a shine with no<br />
finishes required!<br />
It’s also colorful, stylish and available in some<br />
coordinating white marble designs.<br />
1.800.537.9527 | roppe.com<br />
45
46<br />
24" x 24" and 36" x 36" tiles available<br />
pre-grooved for heat weldable installations.<br />
esd static control<br />
esd<br />
S T A T I C C O N T R O L V I N Y L F L O O R I N G<br />
ESD Static Control vinyl flooring is<br />
ideal for clean rooms and computer<br />
rooms, for fiber optic, electronic<br />
and pharmaceutical manufacturing,<br />
and anywhere protection from static<br />
discharge is needed.<br />
Combination of conductive tile and proper conductive<br />
footware keeps body voltage less than 8 volts.<br />
esd<br />
ESD STATIC CONTROL VINYL FLOORING FEATURES AND BENEFITS:<br />
> Contains 2% soybean oil, a renewable resource, which may contribute to the<br />
LEED ® Green Building Certification System, and meets CHPS criteria.<br />
> High luster surface eliminates need for floor finishing – easily buffs to a shine<br />
and resists effects of common chemicals and solder.<br />
> Withstands heavy equipment loads without permanent indentation, even under<br />
rolling load conditions up to 2,000 psi.<br />
> Lifetime conductivity warranty. Provides permanent conductive properties.<br />
10-year limited wear warranty.<br />
> Meets or exceeds all ESD standards by ASTM F-150, NFPA 99 and ESD S7.1.<br />
> All colors available at a Single Price Point.
seamless<br />
Colonial Blue 165<br />
Smoke 174<br />
Iceberg 197<br />
Snow 161<br />
Natural 122<br />
Ivory 198<br />
Sandstone 171<br />
Safety Yellow 760<br />
Thunder Black 756<br />
Tornado Gray 757<br />
750<br />
cumulus white<br />
702<br />
electron<br />
751<br />
haze gray<br />
760<br />
safety yellow<br />
753<br />
stratus blue<br />
756<br />
thunder black<br />
754<br />
storm beige<br />
757<br />
tornado gray<br />
We offer welding beads in a wide variety of colors<br />
to ensure proper fit, finish and appearance.<br />
Use <strong>Roppe</strong> welding beads in areas that require ongoing and<br />
comprehensive wet cleaning, such as operating rooms,<br />
laboratories, clean rooms or any other areas where maintaining<br />
proper hygiene is essential.<br />
701<br />
neutron<br />
1.800.537.9527 | roppe.com<br />
47
48<br />
| P E R F O R M A N C E C O M P O U N D S |<br />
> Antifungal<br />
> Flame-Retardant<br />
> Oil/Grease Resistant<br />
Choose any of the added performance options<br />
you need. We can add to our rubber products the<br />
special performance compound of your choice to<br />
help you meet the challenges of any application or<br />
environment. Compatible with all <strong>Roppe</strong> rubber<br />
flooring colors and designs.<br />
rubber stair treads<br />
tread<br />
R U B B E R : R A I S E D D E S I G N T R E A D S | S P E C I A L T Y R U B B E R T R E A D S<br />
Our line of PVC free rubber stair<br />
treads is the perfect complement to<br />
any flooring project.<br />
From shopping malls, retail settings, government centers,<br />
hospitals and airports. Most styles offer ADA nosecompliant<br />
features. Better yet, they coordinate with our<br />
other tile designs and colors.<br />
rubber stair<br />
treads<br />
RUBBER STAIR TREADS FEATURES AND BENEFITS:<br />
> PVC free.<br />
> Contains 10% natural rubber, a renewable resource which may contribute to<br />
the LEED ® Green Building Certification System, and meets CHPS criteria.<br />
> Available in 9 profiles: Textured, Raised Circular Vantage, Raised Square,<br />
Low Profile Raised Circular, Abrasive Strip, Rib, Smooth, Diamond and<br />
Hammered design profiles. Note: Custom lengths can be ordered in<br />
6" increments up to 9 ft. in Textured, Vantage, Vantage w/ Riser and<br />
Diamond designs.<br />
> Safety abrasive strips standard on some product lines. Custom strips also can<br />
be added for extra traction or to aid the visually impaired. Available with selfilluminating<br />
abrasive glow strips for added safety in darkened conditions.<br />
> Treads fully conform with ASTM F-2169, Type TS and can be added with<br />
the added performance compounds: Antifungal, Flame-Retardant or<br />
Oil/Grease Resistant.<br />
> Available in all rubber tile colors and Fiesta color options that are inherent<br />
throughout the thickness of the tread and available at a Single Price Point.
easy<br />
As easy to install as they are to maintain, our rubber<br />
stair treads are available in the same designer<br />
colors as <strong>Roppe</strong> tile and wall base and come in a<br />
large selection of finishes, textures and gauges,<br />
including our popular <strong>Roppe</strong> Raised Design profiles.<br />
1.800.537.9527 | roppe.com<br />
49
50<br />
raised circular vantage<br />
design #96 with riser<br />
and #98 without riser*<br />
#93 textured design*<br />
#95 hammered design<br />
with riser*<br />
#97 15" extended depth<br />
vantage design*<br />
#40, #41, #50 and #51<br />
abrasive strip design<br />
#30 and #31 diamond<br />
design*<br />
* Abrasive strips can be added to rubber treads #30/31, #60/61, #80/#81, #92, #93, #94, #95, #96, #97 and #98.<br />
9-foot stair treads<br />
#94 raised square<br />
design*<br />
#60*, #61*, #70 and #71<br />
smooth design*<br />
If you have a stairway that’s oversized – with steps more than 72" (1.83m) wide –<br />
<strong>Roppe</strong> now offers three of our most popular tread profiles; Textured, Raised Circular<br />
Vantage, (with and w/out riser) and Diamond designs, in a 9 ft. (2.73m) tread. The same<br />
colors as our standard stair treads are available, and matching 7" (177.8mm) risers are<br />
available as well. Vinyl treads can be special ordered to 9 ft. lengths (minimum<br />
quantities apply).<br />
tread<br />
R U B B E R : R A I S E D D E S I G N T R E A D S | S P E C I A L T Y R U B B E R T R E A D S<br />
rubber stair treads (cont.)<br />
#92 low profile raised<br />
circular design*<br />
#80 and #81<br />
rib design*
| RUBBER AND VINYL RISERS |<br />
safety yellow<br />
black<br />
Risers cover the rear edge of tread to eliminate laborintensive<br />
hand trimming. They are sized to fit most<br />
stair risers, but can be trimmed to fit any height (7"or<br />
less) or length. Note: 9 ft. (2.73m) risers are available<br />
for rubber treads #30 Diamond Design, #93 Textured<br />
Design, #96 and #98 Vantage Profile Designs.<br />
| RUBBER LANDING MATS/TILES |<br />
Note: Rubber warning tiles also can be used to<br />
alert the visually impaired to approaching stairways.<br />
Size: 1/8" gauge, 12" x 12". In addition,<br />
all <strong>Roppe</strong> tiles can be used on landings.<br />
Diamond and Smooth landing mats are also<br />
available 27" x 27".<br />
| RUBBER AND VINYL STRINGERS |<br />
Stringers are available in 10" vinyl or 10" and 12"<br />
rubber, and in all of the colors in coordinating tread<br />
lines at a Single Price Point.<br />
pebble white<br />
ocean gray<br />
teak brown<br />
beige<br />
galley red<br />
glow strip<br />
TREADS FOR THE VISUALLY IMPAIRED<br />
Designed to improve safety for the visually impaired, <strong>Roppe</strong><br />
stair treads are available with grit strips and in contrasting<br />
colors. In addition, rubber detectable warning tiles help<br />
signal changes in elevation.<br />
tapered nose<br />
Many <strong>Roppe</strong> treads have a tapered<br />
nose for a clean fit. They help reduce<br />
tripping hazards while providing a<br />
better finished look.<br />
relief cut<br />
Many of our treads include a molded<br />
relief cut that aids in the installation<br />
of our treads on today’s angled stairs.<br />
90°<br />
60°<br />
1.800.537.9527 | roppe.com<br />
51
52<br />
vinyl stair treads<br />
tread<br />
V I N Y L T R E A D<br />
Our new vinyl stair tread designs<br />
combine the best of two worlds –<br />
affordability and durability –<br />
and without sacrificing the good looks and quality<br />
you’ve come to expect from <strong>Roppe</strong> products. With<br />
many colors and heavy and light duty designer styles<br />
to pick from, you’ll find the perfect complement for<br />
your stair tread project.<br />
vinyl stair<br />
treads<br />
VINYL STAIR TREADS FEATURES AND BENEFITS:<br />
> Available in two new designer styles and 42", 48" and 72" lengths.<br />
> Contains 2% soybean oil, a renewable resource and 10% pre-consumer waste,<br />
which may contribute to the LEED ® Green Building Certification System, and<br />
meets CHPS criteria.<br />
> Abrasive strips, risers and stringers available.<br />
> Abrasive strips can be added to all styles and are available in eight colors.<br />
> Color line is consistent with the Ready Base line of wall base that can be<br />
specified on budget conscience jobs.<br />
> Dedicated color line of 15 colors that are inherent throughout thickness of<br />
the tread and available at a Single Price Point.
100<br />
black<br />
147<br />
light brown<br />
175<br />
slate<br />
184<br />
almond<br />
107<br />
light khaki<br />
168<br />
deep water<br />
177<br />
steel blue<br />
187<br />
blue<br />
117<br />
saddle brown<br />
171<br />
sandstone<br />
178<br />
pewter<br />
195<br />
light gray<br />
132<br />
granite<br />
172<br />
champagne<br />
182<br />
toffee<br />
simple<br />
Vinyl stringers make installation<br />
easier by eliminating time<br />
consuming hand trimming and<br />
fitting. Vinyl risers help provide a<br />
professional finish. Both products<br />
are available in the same colors as<br />
our vinyl stair treads at a Single<br />
Price Point.<br />
1.800.537.9527 | roppe.com<br />
53
54 rubber accessories<br />
rubber<br />
A C C E S S O R I E S<br />
edge guards<br />
#34 underlap carpet edge 3/16"<br />
• 3/16" butting gauge; fast taper; long flange<br />
• Installation Radius: 6 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#35 underlap carpet edge 1/4"<br />
• 1/4" butting gauge<br />
• Installation Radius: 8 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#36 underlap carpet edge 5/16"<br />
• 5/16" butting gauge<br />
• Installation Radius: 6 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#37 underlap carpet edge 3/8"<br />
• 3/8" butting gauge<br />
• Installation Radius: 6 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#38 glue-down carpet edge 1/4"<br />
• 1/4" butting gauge undercut; long flange<br />
smooth taper<br />
• Installation Radius: 5.5 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#39 glue-down carpet edge 5/16"<br />
• 5/16" butting gauge undercut<br />
• Installation Radius: 5.5 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#40 carpet edge guard 9/32"<br />
• 9/32" butting gauge undercut; long flange,<br />
faster taper than #38<br />
• Installation Radius: 6 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#41 tackless carpet bar 1/4"<br />
• 1/4" butting gauge to accept tackless strip;<br />
deep undercut; long flange<br />
• Installation Radius: 12 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#42 custom carpet edging 3/16"<br />
• Notched at 1/8"; undercut 3/16"; long,<br />
smooth taper (similar to #38 and #39)<br />
• Installation Radius: 5.5 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#43 custom carpet edging 1/4"<br />
• Same as #42 above except undercut 1/4";<br />
notched at 1/8"<br />
• Installation Radius: 5.5 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
thresholds<br />
#32 half threshold<br />
• Butts to carpet, ceramic tile; wear resistant;<br />
colors; black, brown, black brown, fawn, dark gray<br />
and camel<br />
• Installation Radius: 9 ft.<br />
• 12 pcs. per ctn.; 30", 36", 42", 48", 60", 72"<br />
#33 full threshold<br />
• Wear resistant compound; colors; black, brown,<br />
black brown, fawn, dark gray and camel<br />
• Installation Radius: Zero<br />
• 6 pcs. per ctn.; 30", 36", 42", 48", 60", 72"<br />
adapter & transitions<br />
nosings<br />
#50 tile/carpet joiner 7/32"<br />
• Provides smooth transition between<br />
carpet and tile<br />
• Installation Radius: 5 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#56 tile/carpet joiner 1/2"<br />
• Similar to #50; wider opening fits wood<br />
and ceramic tile<br />
• Installation Radius: 5 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#60 tile/carpet joiner 3/8"<br />
• Similar to #50; wider opening fits wood<br />
and ceramic tile<br />
• Installation Radius: 5 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#44 fillet strip<br />
• Superb backing for flashing up the wall;<br />
color may vary due to 100% recycled content<br />
• Installation Radius: 1 inch<br />
• 16 9-ft. pcs. per ctn. (144 ft.)<br />
#1 & #2 commercial stair nosing<br />
• For butting to resilient flooring. 2" abrasive<br />
strips available on #1 only; ribbed safety<br />
surface<br />
• Installation Radius: 11 ft.<br />
• 5 9-ft. secs. per tube (45 ft.)<br />
#3 & #4 residential stair nosing<br />
• Same features as #1 and #2 but<br />
lighter weight, smaller step area<br />
• Installation Radius: 11 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)
nosings (cont.)<br />
#5 & #6 domestic stair nosing<br />
• For very light-duty applications<br />
• Installation Radius: 11 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#7 underlap carpet nosing<br />
• For low pile carpet; standard nose (1-1/2")<br />
• Installation Radius: 11 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#m-07 modified underlap<br />
stair nosing<br />
• Same as #7 above except longer nose (2-1/4")<br />
• Installation Radius: 12 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#8 underlap stair nosing<br />
• Flange-type design for 3/16" low pile<br />
carpet; ribbed<br />
• Installation Radius: 11 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#9 & #10 underlap stair nosing<br />
• Flange-type design for 1/8" low pile<br />
carpet; ribbed<br />
• Installation Radius: 12 ft.<br />
• 5 9-ft. secs. per tube (45 ft.)<br />
#11 & #12 single flange carpet<br />
stair nosing<br />
• Smooth surface; heavy-duty design; 3/8"<br />
butting gauge<br />
• Installation Radius: 12 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#13 & #14 single flange carpet<br />
stair nosing<br />
• Smooth surface; light-duty design; 1/4"<br />
butting gauge<br />
• Installation Radius: 12 ft.<br />
• 5 9-ft. secs. per tube (45 ft.)<br />
#15 double flange carpet<br />
stair nosing<br />
• Smooth surface; 3/8" butting gauge<br />
• Installation Radius: 12 ft.<br />
• 5 9-ft. secs. per tube (45 ft.)<br />
#16 double flange carpet<br />
stair nosing<br />
• Smooth surface; 1/4"<br />
butting gauge<br />
• Installation Radius: 12 ft.<br />
• 5 9-ft. secs. per tube (45 ft.)<br />
#17 & #18 undercut<br />
carpet nosing<br />
• 3/16" undercut; ribbed safety surface<br />
• Installation Radius: 12 ft.<br />
• 5 9-ft. secs. per tube (45 ft.)<br />
cove caps<br />
landing trim<br />
corner guard<br />
#28 carpet cove cap (round)<br />
• Trim for coved carpet; undercut 3/16"<br />
(flexible); angle 45º<br />
• Installation Radius: 4 inches<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#46 cove cap (square)<br />
• Undercut 1/8"; cap for coved carpets and<br />
wall paneling; angle 45º<br />
• Installation Radius: 4 inches<br />
• 16 9-ft. secs per ctn. (144 ft.)<br />
#47 cove cap (square)<br />
• Undercut 1/4"; cap for coved carpets<br />
and wall paneling; angle 45º<br />
• Installation Radius: 4 inches.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#57 landing trim<br />
• Special design for open stairwells;<br />
length 98"<br />
• Installation Radius: 3 ft.<br />
• 10 98" pcs. per tube (81.7 ft.)<br />
#19 corner guard<br />
length: 54" (standard)<br />
• Heavy-duty protection; special<br />
order to 9 ft.<br />
• Installation Radius: Not Applicable.<br />
• 6 54" pcs. per ctn. 10 pcs. per ctn.<br />
on special order sizes<br />
1.800.537.9527 | roppe.com<br />
55
educers<br />
56 rubber accessories (cont.)<br />
1"<br />
1"<br />
1"<br />
.080"<br />
rubber<br />
A C C E S S O R I E S<br />
#20 & #49 transitional reducer<br />
7/16"(#20) 9/16"(#49)<br />
• Choose 7/16" or 9/16" butting gauge;<br />
• Installation Radius: 6 ft.<br />
• 10 9-ft. secs. per tube (90 ft.)<br />
#21 reducer strip .080" for resilient floor<br />
• Butt to reducer for .080" material; 1" beveled<br />
width for good transition<br />
• Installation Radius: 6 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#22 & #48 reducer strip<br />
1/8"(#22) 3/32"(#48)<br />
• Same as #21 except choose 1/8" or 3/32"<br />
butting gauge<br />
• Installation Radius: 6 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#23 reducer strip 3/16"<br />
• 3/16" butting gauge; 1-5/16" width for smooth,<br />
neat transition<br />
• Installation Radius: 6 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
.080"<br />
#24 reducer strip 1/4"<br />
• Same as #23 except 1/4" butting gauge<br />
• Installation Radius: 4 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#25 reducer strip 5/16"<br />
• Same as #23 except 5/16" butting gauge<br />
• Installation Radius: 2 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#26 reducer strip 3/8"<br />
• Same as #23 except 3/8" butting gauge<br />
• Installation Radius: 2 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#45 reducer strip 1/8"<br />
• 1/8" butting gauge; 1-1/2" width for smooth transition<br />
• Installation Radius: 8 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)<br />
#59 reducer strip 1/8"<br />
tapering to .080"<br />
• Special design for installations where a 1/8"<br />
must meet an .080" floor<br />
• Installation Radius: 4 ft.<br />
• 16 9-ft. secs. per ctn. (144 ft.)
1.800.537.9527 | roppe.com<br />
57
58<br />
vinyl accessories<br />
nosings<br />
#202 overlap stair nosing 1/8"<br />
• Square nosing; ribbed safety surface<br />
• Installation Radius: 11 ft.<br />
• 10 12-ft. secs. per ctn. (120 ft.)<br />
#203 domestic stair nosing 1/8"<br />
• For light-duty applications; installs over vinyl tile<br />
or sheet goods<br />
• Installation Radius: 11 ft.<br />
• 5 12-ft. secs. per ctn. (60 ft.)<br />
#204 undercut carpet nosing 1/4"<br />
• Heavy-duty for 1/4" and 5/16" carpet<br />
• Installation Radius: 11 ft.<br />
• 5 12-ft. secs. per ctn. (60 ft.)<br />
#206 double undercut stair nosing 1/4"<br />
• For 1/4" and 5/16" carpet<br />
• Installation Radius: 11 ft.<br />
• 5 12-ft. secs. per ctn. (60 ft.)<br />
#207 vinyl 3/8" butt stair nosing<br />
• 3/8" butt stair nosing for carpet and Rop-Cord TM tile<br />
• Installation Radius: 10 ft., color Black only<br />
• 5 12-ft. secs. per ctn. (60 ft.)<br />
fillets & tub moldings<br />
vinyl<br />
A C C E S S O R I E S<br />
#167 fillet strip<br />
• Superb backing for flashing up the wall<br />
color may vary due to 100% recycled content;<br />
angle 45º<br />
• Installation Radius: 1 ft.<br />
• 5 20-ft. coils per ctn. (100 ft.)<br />
#188 cove stick<br />
• Superb backing for flashing up the wall<br />
color Neutral only; angle 45º<br />
• Installation Radius: 2 ft.<br />
• 100 5-ft. pcs. per ctn. (500 ft.)<br />
#189 fillet molding<br />
• Superb backing for flashing up the wall<br />
color Snow only; angle 45º<br />
• Installation Radius: 1 ft.<br />
• 25 5-ft. pcs. per ctn. (125 ft.)<br />
#190 & #191 tub molding<br />
1" (#190) 1-1/2" (#191)<br />
• High-gloss finish, self-stick backing, 1" or<br />
1-1/2" cove for tubs, counters, shelves;<br />
colors Snow and Almond only; angle 45º<br />
• Installation Radius: 1 ft.<br />
• 24 5-ft. pcs. per ctn. (120 ft.)<br />
cove caps<br />
4"<br />
reducers<br />
#158 cove cap (square) 1/4"<br />
• Cap for coved carpets and wall paneling<br />
• Installation Radius: 1 ft.<br />
• 40 12-ft. secs. per ctn. (480 ft.)<br />
#161 carpet cove trim<br />
• For coved carpet; undercut 3/16" (flexible)<br />
• Installation Radius: 10 ft.<br />
• 20 12-ft. secs. per ctn. (240 ft.)<br />
#165 cove cap (square) 1/8"<br />
• Cap for coved sheet vinyl; undercut 1/8"<br />
• Installation Radius: 1 ft.<br />
• 50 12-ft. secs. per ctn. (600 ft.)<br />
#193 vinyl flash cap height: 4"<br />
• Vinyl fillet strip and cove cap in one product;<br />
use for vinyl sheet or carpet up to 1/4" thick<br />
• Installation Radius: 4 inches<br />
• 20 5-ft. secs. per ctn. (100 ft.)<br />
#156 glue-down reducer 5/16"<br />
• 5/16" butting gauge undercut;<br />
long flange, smooth taper<br />
• Installation Radius: 18 ft.<br />
• 5 12-ft. secs. per ctn. (60 ft.)<br />
#160 glue-down reducer 3/16"<br />
• Undercut 3/16"; flange and transition<br />
combined; smooth transition<br />
• Installation Radius: 10 ft.<br />
• 20 12-ft. secs. per ctn. (240 ft.)<br />
#168 underslung reducer<br />
• Binder-bar edging for resilient flooring;<br />
undercut .115" for use with 1/16" to<br />
1/8" material<br />
• Installation Radius: 3 ft.<br />
• 2 35-ft. coils per ctn. (70 ft.)<br />
#169 glue-down reducer 1/4"<br />
• 1/4" undercut; long flange, smooth taper<br />
• Installation Radius: 10 ft.<br />
• 5 12-ft. secs. per tube (60 ft.)<br />
#172 tile reducer 1/8"<br />
• Beveled edge for resilient flooring;<br />
1/8" butting edge<br />
• Installation Radius: 18 ft.<br />
• 50 3-ft. secs. per ctn. (150 ft.)
educers (cont.)<br />
#174 glue-down reducer 1/4"<br />
• Undercut 1/4" with 2" transition<br />
• Installation Radius: 11 ft.<br />
• 10 12-ft. secs. per ctn. (120 ft.)<br />
#176 multi-use reducer 1/2"<br />
• For carpet, ceramic tile or wood floors<br />
• Installation Radius: 6 ft.<br />
• 10 12-ft. secs. per ctn. (120 ft.)<br />
#196 carpet reducer 3/8"<br />
• Designed especially for 3/8" carpet<br />
• Installation Radius: 10 ft.<br />
• 10 12-ft. secs. per ctn. (120 ft.)<br />
wall accessories<br />
corner guard<br />
#350 quarter round<br />
• Designed to outperform wood to<br />
complement a tread, tile or base job<br />
• 10 12-ft. pieces or 40' coil<br />
#166 corner guard 1/8"<br />
length: 54" (standard)<br />
• 1-1/2" returns; standard length 54"<br />
(special order to 9 ft., minimum<br />
quantities required)<br />
• Installation Radius: Not Applicable.<br />
• 12 54" pcs. per ctn. (54 ft. on<br />
standard orders)<br />
adapters | transitions<br />
#152 snap-down divider<br />
• 1-13/32" wide removable section<br />
for joining carpets<br />
• Installation Radius: 6 ft.<br />
• 20 12-ft. secs. per ctn. (240 ft.)<br />
#154 snap-down edging<br />
• 1-9/64" wide removable<br />
section for joining carpet to tile<br />
• Installation Radius: 6 ft.<br />
• 20 12-ft. secs. per ctn. (240 ft.)<br />
adapters | transitions<br />
tracks<br />
#159 tile carpet joiner<br />
• Provides smooth carpet/ tile transition<br />
• Installation Radius: 10 ft.<br />
• 20 12-ft. secs. per tube (240 ft.)<br />
#175 snap-down edging<br />
• 1-1/4" wide removable section for joining<br />
tile to wood<br />
• Installation Radius: 6 ft.<br />
• 20 12-ft. secs. per ctn. (240 ft.)<br />
#177 tile carpet joiner<br />
• Joins 1/4" carpet to 1/8" tile<br />
• Installation Radius: 10 ft.<br />
• 5 12-ft. secs. per ctn. (60 ft.)<br />
#179 snap-down super edge<br />
• 1-7/8" wide removable section for joining<br />
carpet to wood/ceramic<br />
• Installation Radius: 6 ft.<br />
• 5 12-ft. secs. per ctn. (60 ft.)<br />
#182 ceramic/wood carpet<br />
transition 3/8"<br />
• Molding for joining 5/16" carpet to 3/8"<br />
ceramic/wood flooring<br />
• Installation Radius: 12 ft.<br />
• 10 12-ft. secs. per tube (120 ft.)<br />
#195 feature strip<br />
• Designed to transition between 1/8" tiles or add<br />
interest to floor design<br />
• Installation Radius: 3 ft.<br />
• 50 3-ft. pcs. per ctn. (150 ft.)<br />
#155 single flange track<br />
• Works with #152, #154, #175 and #179;<br />
color Black only<br />
• Installation Radius: Zero<br />
• 10 12-ft. pcs. per ctn. (120 ft.)<br />
#178 flexi-track single<br />
flange track<br />
• Works with #152, #154, #175 and #179;<br />
flexible, contours easily; color Black only<br />
• Installation Radius: 6 ft.<br />
• 20 12-ft. pcs. per ctn. (240 ft.)<br />
1.800.537.9527 | roppe.com<br />
59
60<br />
subfloor leveler<br />
subfloor<br />
L E V E L E R<br />
<strong>Roppe</strong> designed its line of subfloor<br />
leveling products with you in mind.<br />
Comprised of a unique thermoplastic rubber compound,<br />
they’re flexible and easy to work with, yet strong and<br />
durable. Unlike the others, we have a range of thicknesses<br />
available, pre-scored for easy on-site trimming. Better yet,<br />
our 12" and longer 18" lengths give you extra options<br />
when it comes to installation because there’s no piecing<br />
together required.<br />
subfloor<br />
leveler<br />
SUBFLOOR LEVELER FEATURES AND BENEFITS:<br />
> Contains 100% pre-consumer waste, which may contribute to<br />
the LEED ® Green Building Certification System.<br />
> Available in two depths, 12" (304.8mm) and 18" (457.2mm), and<br />
four thicknesses: 1/8", 1/4", 3/8" and 1/2".<br />
> No waiting, no curing. Just fast, easy leveling.<br />
> Constructed of a durable thermoplastic rubber compound,<br />
so it’s environmentally friendly.<br />
> Install directly over concrete, wood or steel subfloors.<br />
> Installs easily using ROP375 or 535U adhesive depending<br />
on substrate and installation type, or if rolling leads are a concern.
1/4"<br />
3/8"<br />
#301 = 3/8" x 12"<br />
#302 = 1/4" x 12"<br />
CUT LINE<br />
5/16" THICK<br />
CUT LINE<br />
3/16" THICK<br />
CUT LINE<br />
1/4" THICK<br />
12"<br />
12"<br />
CUT LINE<br />
3/16" THICK<br />
CUT LINE<br />
1/8" THICK<br />
CUT LINE<br />
1/8" THICK<br />
CUT LINE<br />
3/32" THICK<br />
CUT LINE<br />
3/32" THICK<br />
.040"<br />
.040"<br />
1/2"<br />
#303 = 1/2" x 18"<br />
CUT LINE<br />
3/8" THICK<br />
CUT LINE<br />
5/16" THICK<br />
CUT LINE<br />
1/4" THICK<br />
1/8" .040"<br />
#304 = 1/8" x 12"<br />
12"<br />
18"<br />
CUT LINE<br />
3/16" THICK<br />
1.800.537.9527 | roppe.com<br />
CUT LINE<br />
1/8" THICK<br />
CUT LINE<br />
3/32" THICK<br />
.040"<br />
61
62<br />
adhesives<br />
| C O L O R E D C A U L K S |<br />
<strong>Roppe</strong> colored caulks let you fi nish your fl ooring<br />
installation to perfection with colors that match<br />
just right. There’s no color we can’t create in caulk<br />
for you. Perfect for touch-ups and to hide gaps<br />
or imperfections that can occur during installation<br />
of rubber stair treads and tile, our colored caulks<br />
give you an unmatched clean, professionallooking<br />
project, no matter what the application.<br />
adhesives<br />
Choosing the right adhesives<br />
can make the difference in the<br />
appearance, performance and<br />
longevity of your fl oor.<br />
So, always make <strong>Roppe</strong> your choice to ensure long-lasting<br />
and dependable service. No matter what the application,<br />
we have an adhesive right for the job, each specially<br />
formulated to be used with <strong>Roppe</strong> fl ooring products. In fact,<br />
our adhesives must be used for <strong>Roppe</strong> warranties to apply.<br />
This adhesive meets CRI<br />
Green Label Plus criteria.<br />
> Always refer to individual fl ooring products’ 10-Part<br />
Specifi cation Sheet for correct trowel size, approved<br />
substrates, installation type (i.e., rolling loads &<br />
lateral sheer stress) & other specifi c instructions prior<br />
to installation.
ROP205 Cove Base Adhesive ROP210 White Acrylic Cove Base Adhesive ROP319 Stair Tread Adhesive ROP375 Rubber & Vinyl Tile Adhesive<br />
ROP435 Solvent-Free Epoxy Flooring<br />
(Two-Part) Adhesive<br />
ROP535U Universal (Two-Component)<br />
Urethane Enhanced Epoxy Adhesive.<br />
Quik-Stik Adhesive Tape ROP445 Rop-Cord Adhesive<br />
ROPECC Epoxy Caulking Compound<br />
(Stair Tread Nose Filler)<br />
ROP604 ESD (Single-Part) Adhesive ROP605 ESD (Two-Part) Epoxy Adhesive ROP635 Solvent-free Moisture-cured<br />
(Single-Part) Polyurethane Adhesive<br />
1.800.537.9527 | roppe.com<br />
63
64 product specifi cations<br />
All product dimension measurements are<br />
nominal in accordance with ASTM standards.<br />
product<br />
S P E C I F I C A T I O N S<br />
pinnacle rubber base<br />
Standard<br />
Toe Base 5/8"<br />
standard toe:<br />
For many installations.<br />
BASE TYPE THICKNESS 4 FT. PCS. 120 FT. COILS<br />
SBR Rubber 2-1/2" (63.5mm) 2-1/2" (63.5mm)<br />
3" (76.2mm) 3" (76.2mm)<br />
3-1/2" (88.9mm) 3-1/2" (88.9mm)<br />
1/8" (3.175mm) 4" (101.6mm) 4" (101.6mm)<br />
4-1/2" (114.3mm) 4-1/2" (114.3mm)<br />
5" (127.0mm) 5" (127.0mm)<br />
5-1/2" (139.7mm) 5-1/2" (139.7mm)<br />
6" (152.4mm) 6" (152.4mm)<br />
Butt Toe*<br />
Long Toe*<br />
Sanitary Toe*<br />
1/8" (3.175mm) 4" (101.6mm)<br />
*Available in SBR rubber only.<br />
corners<br />
IC Standard<br />
Toe, Inside<br />
OC Standard<br />
Toe, Outside<br />
NT OC<br />
No Toe<br />
Outside<br />
UL OC<br />
Underlap<br />
Outside<br />
LT OC<br />
Long Toe<br />
Outside<br />
CORNER TYPE LENGTH OF RETURN SIZES AVAILABLE<br />
Standard Toe, Inside<br />
Standard Toe, Outside<br />
No Toe, Outside 2-1/4" (57.15mm)<br />
2-1/2" (63.5mm)<br />
2-1/4" (57.15mm) 4" (101.6mm)<br />
6" (152.4mm)<br />
2-1/2" (63.5mm)<br />
4" (101.6mm)<br />
Underlap, Outside* 3" (76.2mm) (with underlap)<br />
Long Toe, Outside* 2-1/4" (57.15mm) 4" (101.6mm)<br />
Sanitary Toe, Outside* 3-3/4" (95.25mm)<br />
*Available in SBR rubber only.<br />
pinnacle plus profi les<br />
2.00"<br />
2.00"<br />
2.00"<br />
2.00"<br />
No Standard ButtNoStandard<br />
Long Butt No Standard<br />
Long Sanitary Butt No Standard Sanitary Long Butt No Long SanitaryButt<br />
Sanitary Long<br />
Toe Base 5/8" Toe Base Toe Toe 5/8" Base Base Toe 5/8" Base Toe Toe<br />
1" 5/8" Base Base<br />
Toe<br />
5/8" Toe Toe Base Base Base<br />
Toe<br />
1" 5/8" Base Toe Toe Base Toe<br />
Toe Base 5/8" Base 1" 5/8" Toe Base Toe Toe Base Toe Base 1" Base 5/8" Toe Toe Base 1"<br />
2.00"<br />
Sanitary<br />
Toe Base<br />
no toe: butt toe: long toe:<br />
sanitary toe:<br />
Adds a decorative Butts precisely to Extends 1" to cover High safety or hygienic<br />
touch to carpeted 1/8" fl oor coverings. wide irregularities<br />
applications. The 2" toe<br />
interiors.<br />
between fl oor<br />
butts up against our rubber<br />
and wall.<br />
tile, eliminating possible<br />
base-to-tile overlap/gaps.<br />
#10 #15 #20 #25 #30 #35 #40 #45 #50 #60 #70 #80 #90 #95 #00<br />
ST OC<br />
Sanitary Toe<br />
Corner Outside<br />
rubber corner blocks<br />
Inside Corner Outside Corner
pinnacle sbr rubber base (ts)<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
Flooring accessories shown in the fi nish schedule or listed herein as Cove Base or Wall Base shall be 1/8"<br />
(3.175mm) thick Type TS, THERMOSET VULCANIZED PINNACLE EXTRUDED RUBBER WALL BASE<br />
as manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. It shall be constructed of fi rst quality materials,<br />
properly vulcanized, and shall be smooth and free from imperfections which detract from its appearance.<br />
The base shall conform fully to all the requirements of Standard Specifi cation F-1861, Type TS (Thermoset<br />
Vulcanized Rubber), Group 1 (solid). All Wall Base shall be of the type (Straight, Style A, or Cove, Style B),<br />
with a nominal height of (2-1/2" {63.5mm}, 3" {76.2mm}, 3-1/2" {88.9mm}, 4" {101.6mm}, 4-1/2" {114.3mm},<br />
5" {127.0mm}, 5-1/2” {139.7mm} and 6" {152.4mm}) _________, in nominal lengths of (48" {1.22m}, or 120<br />
ft. {36.576m}) _________, in the color stated __________, and 1/8" (3.175mm) nominal thickness.<br />
SANITARY WALL BASE shall be 4" (101.6mm) high with a 2" (50.8mm) Sanitary Toe.<br />
The toe shall be 1/8" (3.175mm) nominal thick. The length shall be (48" {1.22m})<br />
nominal long and in the color selected _________.<br />
roppe basemates ® (ts)<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
BaseMates ® shown in the fi nish schedule or listed herein as BaseMates shall be <strong>Roppe</strong> 1/8"<br />
(3.175mm) to 5/16" (7.93mm) thick (straight & concaved foundation when applicable) and will<br />
be Type TS THERMOSET EXTRUDED VULCANIZED RUBBER furnished by <strong>Roppe</strong> <strong>Corporation</strong>,<br />
Fostoria, Ohio. Each shall be constructed of fi rst quality materials and shall be smooth and<br />
free from imperfections which detract from its appearance. The base shall conform fully to the<br />
requirements of Standard Specifi cations F-1861, Type TS (Thermoset Vulcanized Rubber), Group<br />
1 (solid). BaseMates shall be 3/4" (19.05mm), 1-1/8" (28.575mm) and 1-3/4" (44.45mm) in height<br />
and in rolls 60 ft. (18.288m) in length with unique identical colored divider which easily detaches<br />
generating two 60-ft. pieces (120 ft. total per roll {36.576m}); and in the color stated ________.<br />
BASE SHOES<br />
AOO base shoe 1-1/8" AO1 base shoe 1-1/8" AO2 base shoe 1-1/8" AO3 base shoe 1-1/8"<br />
TOP TRIMS<br />
BOO top trim 3/4"<br />
COO top trim 1-3/4"<br />
C21 top trim 1-3/4"<br />
BO1 top trim 3/4"<br />
CO1 top trim 1-3/4"<br />
C22 top trim 1-3/4"<br />
BO2 top trim 3/4" BO3 top trim 3/4"<br />
CO2 top trim 1-3/4"<br />
C23 top trim 1-3/4"<br />
C2O top trim 1-3/4"<br />
1.800.537.9527 | roppe.com<br />
65
66<br />
pinnacle plus<br />
rubber base (ts)<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
Flooring accessories shown in the finish schedule or listed herein<br />
as Cove Base or Wall Base shall be 1/8" (3.175mm) thick Type TS,<br />
THERMOSET VULCANIZED PINNACLE PLUS EXTRUDED RUBBER<br />
WALL BASE as manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria,<br />
Ohio. It shall be constructed of first quality materials, properly<br />
vulcanized, and shall be smooth and free from imperfections<br />
which detract from Its appearance. The base shall conform fully<br />
to all the requirements of Standard Specification F-1861, Type TS<br />
(Thermoset Vulcanized Rubber), Group 1 (solid). All Wall Base<br />
shall be of the style __________ (Style B, Base Shoe or Cove),<br />
with a height of _________ (4" {101.6mm}, 4-9/16" {115.9mm},<br />
5" {127.0mm}, 5-1/4" {133.4mm}, 5-1/2" {139.7mm}) nominal,<br />
in the ________ color stated, and 1/8" (3.175mm) nominal<br />
thickness. The length shall be ________ (60 ft.{18.288m} nominal<br />
or 120 ft.{36.576m}) nominal long based on ___________ profile<br />
selected. _____________.<br />
TECHNICAL DATA<br />
Pinnacle Rubber Base: Meets Federal Specification<br />
F-1861 for Type TS Thermoset<br />
Vulcanized Rubber<br />
Thickness: ASTM F-386, 1/8" (3.175mm) ±.015"<br />
Hardness: 75 ±5<br />
Flexibility: ASTM F-137, 1/4" (6.35mm) mandrel,<br />
no cracking or breaking<br />
Staining: ASTM F-1861 Section 12, complies,<br />
no staining<br />
Light resistance: ASTM F-1515, average Delta E less<br />
than 8.0<br />
Chemical resistance: ASTM F-925, complies (chemicals<br />
listed in ASTM F 1861, 8.4.1-8.4.11)<br />
Dimensional stability: ASTM F-1861, complies, ±.25% x<br />
length<br />
Squareness: 90 degrees ±.5 degrees<br />
rubber corner blocks (ts)<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
<strong>Roppe</strong> Rubber Corner Blocks shown in the finish schedule<br />
or listed herein as <strong>Roppe</strong> Rubber Corner Blocks shall be 1/4"<br />
(25.4mm) from finish corner to edge and will be Type TS<br />
THERMOSET EXTRUDED VULCANIZED RUBBER furnished by<br />
<strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. Each shall be constructed<br />
of first-quality materials and shall be smooth and free from<br />
imperfections which detract from its appearance. The corner<br />
shall conform fully to the requirements of Standard Specifications<br />
F-1861, Type TS (Thermoset Vulcanized Rubber), Group 1 (solid).<br />
Rubber Corner Blocks shall be __________ (inside or outside<br />
preference inserted) and ________ (custom size inserted) in<br />
length and in the color stated ______.<br />
product specifications<br />
All product dimension measurements are<br />
nominal in accordance with ASTM standards.<br />
product<br />
S P E C I F I C A T I O N S<br />
visuellé ® wall base (tp)<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
Flooring accessories shown in the finish schedule or listed herein as Visuellé ® Wall Base<br />
shall be <strong>Roppe</strong> 1/8" (3.175mm) to 3/8" (9.525mm) thick Type TP THERMOPLASTIC<br />
RUBBER EXTRUDED BASE furnished by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. It shall be<br />
constructed of first-quality materials and shall be smooth and free from imperfections<br />
which detract from its appearance. The base shall conform fully to the requirements of<br />
Standard Specifications F-1861, Type TP (Thermoplastic Rubber), Group 1 (solid). The<br />
wall base shall be 4-1/2" (114.3mm) or 7-3/4" (196.85mm) in height and in rolls 40 ft.<br />
(12.192mm) in length and in the ___________ color stated.<br />
TECHNICAL DATA<br />
Visuellé Wall Base: Meets Federal Specification F-1861 for Type TP<br />
Thermoplastic Rubber<br />
Thickness: ASTM F-386, 1/8" (3.175mm) to 1/4" (6.35mm) ±.015"<br />
Hardness: 90 ±5<br />
Flexibility: ASTM F-137, 1/4" (6.35mm) mandrel, no cracking or breaking<br />
Staining: ASTM F-1861 Section 12, complies, no staining<br />
Light resistance: ASTM F-1515, average Delta E less than 8.0<br />
Chemical resistance: ASTM F-925, complies (chemicals listed in ASTM F-1861, 8.4.1-8.4.11)<br />
Dimensional stability: ASTM F-1861, complies, ±.25% x length<br />
Squareness: 90 degrees ±.5 degrees<br />
visuellé ® wall base<br />
BASE TYPE THICKNESS 40 FT. COILS<br />
Standard 3/8" (3.175mm) nominal 4-1/2" (114.3mm)<br />
1/4" (6.35mm) nominal 7-3/4" (196.9mm)<br />
VISUELLÉ ® CORNER SYSTEMS (All corners are packed 4 to a carton)<br />
Corner Type Weight per Carton<br />
7-3/4" (196.9mm) Mitered Outside 5 lbs. (2.27kg)<br />
7-3/4" (196.9mm) Mitered Inside 5 lbs. (2.27kg)<br />
4-1/2" (114.3mm) Mitered Outside 4 lbs. (1.81kg)<br />
4-1/2" (114.3mm) Mitered Inside 4 lbs. (1.81kg)<br />
RUBBER C O R N E R B L O C K S M I T E R E D C O R N E R S<br />
Inside Corner Outside Corner<br />
alphabase ® rubber base (ts)<br />
base profile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
Flooring accessories shown in the finish schedule or listed herein as Cove Base or Wall<br />
Base shall be 1/8" (3.175mm) thick Type TS, THERMOSET VULCANIZED ALPHABASE ®<br />
EXTRUDED RUBBER WALL BASE as manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria,<br />
Ohio. It shall be constructed of first-quality materials, properly vulcanized, and shall<br />
be smooth and free from imperfections which detract from its appearance. The base<br />
shall conform fully to all the requirements of Standard Specification F-1861, Type TS<br />
(Thermoset Vulcanized Rubber), Group 1 (solid). All Wall Base shall be of the type<br />
(Straight, Style A, or Cove, Style B), with a nominal height of (2-1/2" {63.5mm}, 3"<br />
{76.2mm}, 3-1/2" {88.9mm}, 4" {101.6mm}, 4-1/2" {114.3mm}, 5" {127.0mm}, 5-1/2"<br />
{139.7mm} and 6" {152.4mm}) _________, in nominal lengths of (48" {1.22m}, or<br />
120 ft. {36.576m})________, in the color stated _________, and 1/8” (3.175mm)<br />
nominal thickness.<br />
3/8"<br />
4-1/2"<br />
base profile<br />
1/4"<br />
7-3/4"
700 series wall base (tp)<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
Flooring accessories shown in the finish schedule or listed herein as<br />
Cove Base or Wall Base shall be <strong>Roppe</strong> 1/8" (3.175mm) thick Type TP<br />
THERMOPLASTIC RUBBER EXTRUDED, 700 SERIES WALL BASE as<br />
manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. It shall be constructed<br />
of first-quality materials and shall be smooth and free from<br />
imperfections which detract from its appearance. The base shall conform<br />
fully to the performance requirements of Standard Specification F-1861,<br />
Type TP (Thermoplastic Rubber), Group 2 (layered). All wall base shall be<br />
of the type________ (Straight, Style A, or Cove, Style B), with a height<br />
of___________ (2-1/2" {63.5mm}, 4" {101.6mm}, or 6" {152.4mm}), in<br />
lengths of _________ (48" {1.22m} or 120 ft. {36.576m}), and in the color<br />
stated _______, and of 1/8" (3.175mm) thickness.<br />
TECHNICAL DATA<br />
700 Series Base: Meets Federal Specification F-1861 for Type<br />
TP Thermoplastic Rubber<br />
Thickness: ASTM F-386, 1/8" (3.175mm) ±.015"<br />
Hardness: 90 ±5<br />
Flexibility: ASTM F-137, 1/4" (6.35mm) mandrel, no<br />
cracking or breaking<br />
Staining: ASTM F-1861 Section 12, complies, no<br />
staining<br />
Light resistance: ASTM F-1515, average Delta E less than 8.0<br />
Chemical resistance: ASTM F-925, complies (chemicals listed in<br />
ASTM F-1861, 8.4.1-8.4.11)<br />
Dimensional stability: ASTM F-1861, complies, ±.25% x length<br />
Squareness: 90 degrees ±.5 degrees<br />
700 series wall base<br />
Standard<br />
Toe Base 5/8"<br />
BASE TYPE THICKNESS 4 FT. PCS. 120 FT. COILS<br />
TPR Rubber 2-1/2" (63.5mm) 2-1/2" (63.5mm)<br />
Standard Toe 1/8" (3.175mm) 4" (101.6mm) 4" (101.6mm)<br />
& No Toe 6" (152.4mm) 6" (152.4mm)<br />
CORNER TYPE LENGTH OF RETURN SIZES AVAILABLE<br />
Standard Toe, Inside<br />
Standard Toe, Outside<br />
Standard Toe:<br />
For many<br />
installations.<br />
No Toe:<br />
Adds a<br />
decorative<br />
touch to<br />
carpeted<br />
interiors.<br />
IC Standard OC Standard<br />
2.00" Toe, Inside 2.00" Toe, Outside<br />
No Standard ButtNo<br />
Long Butt<br />
Long Sanitary Sanitary<br />
Toe Base 5/8" Toe Base Toe 5/8" Base Toe Base 5/8" 1" Toe Toe Base Base 1" Toe Base<br />
No Toe, Outside 3" (76.2mm)<br />
vinyl wall base (tv)<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
Flooring accessories shown in the finish schedule or listed herein as<br />
vinyl Cove Base or Wall Base shall be Type TV THERMOPLASTIC VINYL<br />
<strong>Roppe</strong> VINYL WALL BASE, furnished by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria<br />
Ohio. It shall be constructed of first quality materials and shall be<br />
smooth and free from any imperfections which detract from its appearance.<br />
The base shall conform fully to the requirements of the Standard<br />
Specification F-1861, Type TV, Thermoplastic Vinyl, Group 2 (layered);<br />
Style A (Straight) or Style B (Cove). All wall base shall be ______ (2-1/2"<br />
{63.5mm}, 4" {101.6mm}, or 6" {152.4mm}) in height and in lengths of<br />
_______ (48" {1.22m} or 120 ft. {36.576m}). The wall base shall be of the<br />
type __________ (Straight or Cove), in _______ (.080" {2.03mm} or 1/8"<br />
{3.175mm}) gauge thickness, and in the _________ color stated.<br />
TECHNICAL DATA<br />
Vinyl Base: Meets Federal Specification F-1861 for Type TV<br />
Thermoplastic Vinyl<br />
Thickness: ASTM F-386, 1/8" (3.175mm) ±.015" or<br />
.080" (2.03mm) +.015"/ –.005"<br />
Hardness: 90 ±5<br />
Flexibility: ASTM F-137, 1/4" (6.35mm) mandrel, no cracking<br />
or breaking<br />
Staining: ASTM F-1861 Section 12, complies, no staining<br />
Light resistance: ASTM F-1515, average Delta E less than 8.0<br />
Chemical resistance: ASTM F-925, complies (chemicals listed in ASTM<br />
F-1861, 8.4.1-8.4.11)<br />
Dimensional stability: ASTM F-1861, complies, ±.25% x length<br />
Squareness: 90 degrees ±.5 degrees<br />
corners Standard Toe: corners<br />
NT OC<br />
No Toe<br />
Outside<br />
2-1/2" (63.5mm)<br />
3" (76.2mm) 4" (101.6mm)<br />
6" (152.4mm)<br />
2-1/2" (63.5mm)<br />
4" (101.6mm)<br />
vinyl wall base<br />
Standard<br />
Toe Base 5/8"<br />
BASE TYPE THICKNESS 4 FT. PCS. 120 FT. COILS<br />
TV Vinyl<br />
.080" (2.03mm) &<br />
Standard Toe<br />
1/8" (3.175mm)<br />
& No Toe<br />
2-1/2" (63.5mm)<br />
4" (101.6mm)<br />
6" (152.4mm)<br />
2-1/2" (63.5mm)<br />
4" (101.6mm)<br />
6" (152.4mm)<br />
CORNER TYPE LENGTH OF RETURN SIZES AVAILABLE<br />
Standard Toe, Inside<br />
Standard Toe, Outside<br />
For many<br />
installations.<br />
No Toe:<br />
Adds a<br />
decorative<br />
touch to<br />
carpeted<br />
interiors.<br />
IC Standard OC Standard<br />
2.00" Toe, Inside 2.00" Toe, Outside<br />
No Standard ButtNo<br />
Long Butt<br />
Long Sanitary Sanitary<br />
Toe Base 5/8" Toe Base Toe 5/8" Base Toe Base 5/8" 1" Toe Toe Base Base 1" Toe Base<br />
No Toe, Outside 3" (76.2mm)<br />
2-1/2" (63.5mm)<br />
3" (76.2mm) 4" (101.6mm)<br />
6" (152.4mm)<br />
2-1/2" (63.5mm)<br />
4" (101.6mm)<br />
1.800.537.9527 | roppe.com<br />
NT OC<br />
No Toe<br />
Outside<br />
67
ubber tile specifications<br />
Characteristic: Requirement ASTM Test Method<br />
Hardness: Min 85 Shore A D-2240<br />
Static Load Resistance: < 0.005 in. (0.127mm) at 250lb. F-970<br />
(113.4kg) load<br />
Resistance to Short-Term No more than slight change in F-925<br />
Chemical Exposure: surface dulling, Surface attack, or staining.<br />
Resistance to Heat: Average Delta E not greater than 8.0 F-1514<br />
Abrasion Resistance: Less than 1 gram loss after 1,000 cycles D-3389<br />
Dimensional Stability: The dimensional change of the F-2199<br />
rubber floor tile in both the machine<br />
direction (MD) and the across machine<br />
(AMD) shall not exceed 0.15%<br />
Thickness: As specified<br />
Smooth Surface Tile: + 0.005 in. (+ 0.127mm) F-386<br />
Molded Pattern Tile: + 0.015/-0.005 in. (+0.381 mm/-0.127mm) F-386<br />
Embossed Pattern Tile: + 0.015/-0.005 in. (+0.381 mm/-0.127mm) F-373<br />
Size: Up to & including 12 by 12 in = + 0.016 in F-2055<br />
(+ 0.4mm) Larger than 12 by12 in & up to &<br />
including 24 by 24 in = + 0.018 in. (+ 0.45mm).<br />
Larger than 24 by 24 in = + 0.020 in. (+ 0.5mm)<br />
Squareness: Max, 0.010 in (0.254mm) max. F-2055<br />
Quality of Cut: 0.005 in (0.127mm) max. F-511<br />
1. <strong>Roppe</strong> flooring adhesives must be used for the <strong>Roppe</strong> warranty to apply.<br />
ROP375, ROP435 or ROP535U may be used depending on subfloor type<br />
or condition.<br />
2. For interior use only.<br />
3. Proper maintenance on a regular basis is essential to the appearance and<br />
the wear life of the tile.<br />
4. Tiles may have slight color variations not detected at the factory. All tiles must<br />
be dry laid and examined for color acceptance before being installed (see<br />
installation brochure).<br />
5. Heavy sunlight penetration from direct or glass-filtered sources may cause fading.<br />
6. Certain chemicals and various substances normally attack rubber formulations<br />
<strong>Roppe</strong>’s rubber tile should not be used in commercial or residential kitchens and<br />
or areas where impregnation from cooking oils, vegetable fats, etc., is likely to<br />
occur. If any particular chemicals or substances are going to be present in the<br />
environment, adequate testing should be done in advance to ensure suitability<br />
for that application.<br />
7. Certain oils and antioxidants sometimes used in the manufacture of rubber tires<br />
can cause staining and discoloration. In auto showrooms, for example, we<br />
recommend that tires NOT be allowed to come in direct contact with the tile;<br />
we suggest utilizing a pad made from carpet, Masonite ® , scrap tile, etc. Call factory<br />
for specific details.<br />
8. Not recommended for use in hospital operating rooms or computer rooms;<br />
NOT a conductive tile.<br />
F-925 Resistance to Short-Term Chemical Exposure—When tested in accordance with<br />
Test Method F 925, the rubber floor tile shall have no more than a slight change in<br />
surface dulling, surface attack, or staining when exposed to the following chemicals:<br />
> White vinegar (5% acetic acid)<br />
> Rubbing alcohol (70% isopropyl alcohol<br />
> Sodium hydroxide solution (5% NaOH)<br />
> Hydrochloric acid solution (5% HCl)<br />
> Sulfuric acid solution (5% H2SO4)<br />
> Household ammonia solution (5% NH4OH)<br />
> Household bleach (5.25% NaOCl)<br />
> Disinfectant cleaner (5% active phenol)<br />
68 product specifications<br />
All product dimension measurements are<br />
nominal in accordance with ASTM standards.<br />
product<br />
S P E C I F I C A T I O N S<br />
dimensions rubber tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All floors shown in the finish schedule or listed in this<br />
specification for heavy traffic areas shall be <strong>Roppe</strong>’s<br />
_______(insert design name) RUBBER TILE, manufactured<br />
by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. The tile shall<br />
be homogeneously constructed of first quality resilient<br />
rubber compound, and shall conform to ASTM F-1344,<br />
Class 1. The tile shall be 19-11/16" x 19-11/16" (50cm x<br />
50cm) size, 1/8" (3.175mm) gauge size, and in the color<br />
_________ (insert color) selected.<br />
raised design rubber<br />
floor tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All floors shown in the finish schedule or listed in this<br />
specification for heavy traffic areas shall be <strong>Roppe</strong>’s<br />
_______(insert design name) RUBBER TILE, manufactured<br />
by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. The tile shall<br />
be homogeneously constructed of first quality resilient<br />
rubber compound, and shall conform to ASTM F-1344,<br />
Class 1. The tile shall be 19-11/16" x 19-11/16" (50cm<br />
x 50cm) size, 1/8" (3.175mm) gauge and in the color<br />
_________ (insert color) selected.<br />
safeTcork ® rubber floor tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All tile floors shown in the finish schedule or listed in<br />
this specification as rubber tile flooring shall be ROPPE<br />
SAFETCORK ® RUBBER TILE, manufactured by <strong>Roppe</strong><br />
<strong>Corporation</strong>, Fostoria, Ohio. The tile shall conform to ASTM<br />
F-1344, Class 1. The tile shall be ______ (1/8" {3.175mm}<br />
or 3/16" {4.76mm}) thick and size ________ (12" x 12"<br />
{304.8mm x 304.8mm}, 19-11/16" x 19-11/16" {50cm x<br />
50cm}, or 36" x 36" {91.4cm x 91.4cm} in 1/8" only). The<br />
color shall be _________ (insert color name & number).<br />
smooth finish rubber tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All floors shown in the finish schedule or listed in this<br />
specification for heavy traffic areas shall be <strong>Roppe</strong>’s _______<br />
(insert design name) RUBBER TILE, manufactured by <strong>Roppe</strong><br />
<strong>Corporation</strong>, Fostoria, Ohio. The tile shall be homogeneously<br />
constructed of first quality resilient rubber compound,<br />
and shall conform to ASTM F-1344, Class 1.<br />
The tile shall be ________ (insert size selected) (12" x 12"<br />
{304.8mm x 304.8mm}, 19-11/16" x 19-11/16" {50cm x<br />
50cm}, or 36" x 36" {91.4cm x 91.4cm}) , 1/8" (3.175mm)<br />
or 3/16” (4.76mm) gauge size, and in the color _________<br />
((insert color name and number, plain {P} or marbleized {M})<br />
selected).<br />
lug-back vantage rubber<br />
floor tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All floors shown in the finish schedule or listed in this<br />
specification for heavy traffic areas shall be <strong>Roppe</strong>’s<br />
LUG-BACK VANTAGE RUBBER TILE, manufactured by<br />
<strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. The tile shall be<br />
homogeneously constructed of first quality resilient<br />
rubber compound, and shall conform to ASTM F-1344,<br />
Class 1. The tile shall be 19-11/16" x 19-11/16" (50cm x<br />
50cm) size, 13/64" (5.16mm) gauge size, and in the color<br />
_______ (insert color) selected.
982 CRACKLE DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 1/8" (3.175mm)<br />
PACKAGING:<br />
No. per carton: 16<br />
Wt. per carton: 42 lbs. (19.05kg)<br />
Sq. ft. per carton: 43 (3.99 sq. m)<br />
983 RANDOM DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 1/8" (3.175mm)<br />
PACKAGING:<br />
No. per carton: 16<br />
Wt. per carton: 42 lbs. (19.05kg)<br />
Sq. ft. per carton: 43 (3.99 sq. m)<br />
984 STRIPE DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 1/8" (3.175mm)<br />
PACKAGING:<br />
No. per carton: 16<br />
Wt. per carton: 42 lbs. (19.05kg)<br />
Sq. ft. per carton: 43 (3.99 sq. m)<br />
991 SLATE DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 1/8" (3.175mm)<br />
PACKAGING:<br />
No. per carton: 16<br />
Wt. per carton: 42 lbs. (19.05kg)<br />
Sq. ft. per carton: 43 (3.99 sq. m)<br />
993 TEXTURED DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 1/8" (3.175mm)<br />
PACKAGING:<br />
No. per carton: 16<br />
Wt. per carton: 43 lbs. (19.50kg)<br />
Sq. ft. per carton: 43 (3.99 sq. m)<br />
995 HAMMERED DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 1/8" (3.175mm)<br />
PACKAGING:<br />
No. per carton: 16<br />
Wt. per carton: 43 lbs. (19.50kg)<br />
Sq. ft. per carton: 43 (3.99 sq. m)<br />
976/978/969/970 SMOOTH DESIGN<br />
DIMENSIONS:<br />
Size: 976/978: 12" x 12", (304.8mm x 304.8mm)<br />
969/970: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 978/970: 1/8" (3.175mm)<br />
976/969: 3/16" (4.76mm)<br />
PACKAGING:<br />
No. per carton: 976: 36 per carton, 978: 45 per carton,<br />
969: 10 per carton, 970: 16 per carton<br />
Wt. per carton: 976: 54 lbs. (24.49kg). 978: 45 lbs. (20.41kg),<br />
969: 40.5 lbs. (18.37kg), 970: 44 lbs. (19.95kg)<br />
Sq. ft. per carton: 976: 36 (3.34 sq. m), 978: 45 (4.18 sq. m),<br />
969: 27 (2.49 sq. m), 970: 43 (3.99 sq. m)<br />
953 WARNING TILE DESIGN<br />
Designed for use in areas such as stairwell<br />
landings to alert the visually impaired<br />
to approaching changes in elevation. It meets the<br />
guidelines of ANSI A117.1 1986 Section 4.27<br />
Detectable Warnings, and Title 24.<br />
DIMENSIONS:<br />
Size: 12" x 12"<br />
(304.8mm x 304.8mm)<br />
Overall thickness: 1/8" (3.175mm)<br />
1/32" (1.27mm) w/out profile<br />
1/8" (3.175mm) w/ profile<br />
PACKAGING:<br />
No. per carton: 45<br />
Wt. per carton: 51.4 lbs. (23.3kg)<br />
Sq. ft. per carton: 45 (4.18 sq. m)<br />
1<br />
.080" 1 /8"<br />
51 /64"<br />
1 /2" 29<br />
/32"<br />
992 LOW PROFILE RAISED CIRCULAR DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 1/8" (3.175mm)<br />
7/64" (2.78mm) w/out profile<br />
5/45" (2.82mm) w/ profile<br />
Profile height: 1/64" (.4mm)<br />
Profile diameter: 1-9/64" (28.97mm)<br />
PACKAGING:<br />
No. per carton: 16<br />
Wt. per carton: 42 lbs. (19.05kg)<br />
Sq. ft. per carton: 43 (3.99 sq. m)<br />
994 RAISED SQUARE DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 1/8" (3.175mm) without profile<br />
9/64" (3.57mm) w/ profile<br />
Profile height: 1/32" (.79mm)<br />
Profile width: 1-5/8" (41.28mm)<br />
PACKAGING:<br />
No. per carton: 16<br />
Wt. per carton: 49 lbs. (22.23kg)<br />
Sq. ft. per carton: 43 (3.99 sq. m)<br />
996 RAISED CIRCULAR VANTAGE DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Overall thickness: 5/32" (3.97mm) with profile<br />
1/8" (3.175mm) without profile<br />
Profile height: 3/64" (1.19mm)<br />
Profile diameter: 1-3/32" (27.78mm)<br />
PACKAGING:<br />
No. per carton: 16<br />
Wt. per carton: 50 lbs. (22.68kg)<br />
Sq. ft. per carton: 43 (3.99 sq. m)<br />
LUG-BACK VANTAGE DESIGN<br />
DIMENSIONS:<br />
Size: 19-11/16" x 19-11/16"<br />
(50cm x 50cm)<br />
Thickness: 13/64" (5.16mm) with profile<br />
11/64" (4.37mm) without profile<br />
Profile height: 1/32" (.79mm)<br />
Profile diameter: 1-3/32" (27.78mm)<br />
PACKAGING:<br />
No. per carton: 10<br />
Wt. per carton: 40 lbs. (18.16kg)<br />
Sq. ft. per carton: 27 (2.5 sq. m)<br />
1.800.537.9527 | roppe.com<br />
69
70<br />
warning tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All floors shown in the finish schedule or listed in this specification<br />
for heavy traffic areas shall be <strong>Roppe</strong>’s WARNING RUBBER TILE,<br />
manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. The tile shall<br />
be homogeneously constructed of first quality resilient rubber<br />
compound, and shall conform to ASTM F-1344, Class 1. The tile<br />
shall be 12" x 12" (304.8 mm x 304.8 mm) size, 1/8" (3.175 mm)<br />
gauge size, and in the color _______ (insert color) selected.<br />
designer‘s choice ® rubber floor tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All floors shown in the finish schedule or listed in this specification<br />
for heavy traffic areas shall be <strong>Roppe</strong>’s _______(insert design name)<br />
RUBBER TILE, manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio.<br />
The tile shall be homogeneously constructed of first quality<br />
resilient rubber compound, and shall conform to ASTM F-1344, Class<br />
1. The tile shall be ___________(insert size based on component) 1/8"<br />
(3.175mm) gauge and in the color _________ (insert color) selected.<br />
spike/skate rubber flooring<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All floors shown in the finish schedule or listed in this specification for<br />
heavy traffic areas shall be <strong>Roppe</strong>’s SPIKE/SKATE RESISTANT RUBBER<br />
TILE, manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. The tile<br />
shall be homogeneously constructed of first-quality resilient rubber<br />
compound, and shall conform to ASTM F-1344, Class 1. The tile shall<br />
be 19-11/16" x 19-11/16" (50cm x 50cm) size, 3/8" (9.00mm) gauge<br />
and in the color _________ (insert color) selected. WT. Per carton:<br />
6.50 lbs., SQ. FT. Per Carton: 16.14 sq. ft/ctn.<br />
tuflex ® titan recycled rubber tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
<strong>Roppe</strong> Tuflex ® Titan Recycled Rubber Tile shown in the finish schedule<br />
or listed herein as ROPPE TUFLEX TITAN RECYCLED RUBBER TILE<br />
shall be _________ (3/8" {9.00mm}) in nominal thickness, furnished<br />
by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. Each shall be smooth and free<br />
from imperfections which detract from its appearance, and contain no<br />
asbestos fiber. Tuflex Titan Recycled Rubber Tile shall be __________<br />
(27" x 27" {685.8mm x 685.8mm} Square Tile and/or 27" x 27"<br />
nominal {609.6mm x 609.6mm} Inter-Locking Tiles), and<br />
in the color __________ (list color) selected.<br />
tuflex ® spartus recycled rubber tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
<strong>Roppe</strong> Tuflex ® Spartus Recycled Rubber Tile shown in the finish<br />
schedule or listed herein as ROPPE TUFLEX SPARTUS RECYCLED<br />
RUBBER TILE shall be _________ (3/8" {9.00mm}) in nominal<br />
thickness, furnished by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. Each<br />
shall be smooth and free from imperfections which detract from its<br />
appearance, and contain no asbestos fiber. Tuflex Spartus Recycled<br />
Rubber Tile shall be __________ (27" x 27" {685.8mm x 685.8mm}<br />
Square Tile and/or 27" x 27" nominal {609.6mm x 609.6mm}<br />
Inter-Locking Tiles), and in the color __________ (list color) selected.<br />
product specifications<br />
All product dimension measurements are<br />
nominal in accordance with ASTM standards.<br />
product<br />
S P E C I F I C A T I O N S<br />
roppe recoil fitness flooring<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
<strong>Roppe</strong> Recoil Rubber Fitness Flooring shown in the finish schedule or<br />
listed herein as ROPPE RECOIL FITNESS FLOORING shall be _________<br />
(5/32" {4.00mm}, 1/4" {6.00mm}, 3/8" {9.00mm) or 1/2" {12.00mm}) in<br />
nominal thickness, furnished by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. Each<br />
shall be homogeneous in construction and shall be smooth and free from<br />
imperfections which detract from its appearance, and contain no asbestos<br />
fiber. Rubber Flooring shall be __________ (36" x 36" nominal {914.4mm x<br />
914.4mm} Square Tile, 36" x 36" nominal {914.4mm x 914.4mm}<br />
Inter-Locking Tiles or 48" (1.22m) nominal in width by 49.5 feet {15.09m}<br />
nominal in length in Rolls), and in the color __________ (list color) selected<br />
and color chip percentage _____ (All black {no EPDM Color Chip} or 10%,<br />
15% or 20% - 90% EPDM Color Chip) stated.<br />
non-vulcanized rop-cord<br />
rubber flooring<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All floors shown in the finish schedule or listed in this specification for heavy<br />
traffic area shall be ROPPE NON-VULCANIZED ROP-CORD as furnished by<br />
<strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. Rop-Cord Non-Vulcanized tile shall be<br />
homogenously constructed of select reclaimed commercial tile components,<br />
reinforced with a polyester non-woven fabric bonded to a thin adhesive<br />
layer. Tiles shall be 3/8" nominal thickness, shall conform to industry<br />
standards and shall contain no asbestos fiber. Floor covering shall be<br />
12" x 12" (304.8mm x 308.4mm) tiles, and in the color _________ selected<br />
(insert color name and number selected).<br />
fiesta ® tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All floors shown in the finish schedule or listed in this specification for<br />
heavy traffic areas shall be <strong>Roppe</strong>’s ______________ (insert color name<br />
and number) Fiesta ® RUBBER TILE, manufactured by <strong>Roppe</strong> <strong>Corporation</strong>,<br />
Fostoria, Ohio. The tile shall be homogeneously constructed of first-quality<br />
resilient rubber compound and shall conform to ASTM F-1344, Class 1. The<br />
tile shall be ______________ [19-11/16" x 19-11/16" (50cm x 50cm) standard<br />
size or 12" x 12" (304.8mm x 304.8mm) by special order in Textured or<br />
Hammered Design only] and in the color selected.<br />
safeTcork ® fiesta ® rubber floor tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All tile floors shown in the finish schedule or listed in this specification as<br />
rubber tile flooring shall be ROPPE SAFETCORK ® FIESTA ® RUBBER TILE,<br />
manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. The tile shall conform<br />
to ASTM F-1344, Class 1. The tile shall be______ (1/8" {3.175mm} thick and<br />
size______ (19-11/16" x 19-11/16" {50cm x 50cm}). The color shall be______<br />
(insert color name & number).
north coast solid vinyl tile<br />
SPECIFICATION DATA<br />
Type:. . . . . . . . . . . . . . . . . . . . . . . Vinyl<br />
Construction: . . . . . . . . . . . . . . . . Laminated<br />
Wear layer thickness: . . . . . . . . . . 0.040" (1.02mm) minimum<br />
Use:. . . . . . . . . . . . . . . . . . . . . . . . Commercial, residential<br />
Abrasion: . . . . . . . . . . . . . . . . . . . ASTM D-3389<br />
(H-18 Calibrau, 500g/load)<br />
Wt. loss g/1000 cycles less than .15g<br />
Sizes:. . . . . . . . . . . . . . . . . . . . . . . 3" x 36" (76.2mm x 91.4cm)<br />
12" x 12" (304.8mm x 304.8mm)<br />
18" x 18" (457.2mm x 457.2mm)<br />
Edging:. . . . . . . . . . . . . . . . . . . . . Straight or beveled<br />
Thickness: . . . . . . . . . . . . . . . . . . . 1/8" (3.175mm)<br />
Specifi c gravity: . . . . . . . . . . . . . . 1.41<br />
Weight lb./sq. ft.: . . . . . . . . . . . . . 0.92<br />
Hardness, Shore A:. . . . . . . . . . . . 95-96<br />
Modulus, 10% psi: . . . . . . . . . . . . 1000-1200<br />
Tensile strength, psi:. . . . . . . . . . . 2300-2500<br />
Maximum static load, psi: . . . . . . 300<br />
Fire resistance: . . . . . . . . . . . . . . . Class 1 (E-648 Radiant Panel Test)<br />
Slip resistance: . . . . . . . . . . . . . . . Rated .52 static coeffi cient of friction,<br />
James Machine, dry leather<br />
Light stability: . . . . . . . . . . . . . . . . Excellent<br />
Stain and chemical resistance: . . . Excellent<br />
Easily maintained – refer to maintenance instructions.<br />
north coast collection ® solid vinyl tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
<strong>Roppe</strong> North Coast Collection Flooring shown in the fi nish schedule or<br />
listed herein as <strong>Roppe</strong> _____ (insert design name) SOLID VINYL TILE<br />
shall be <strong>Roppe</strong>’s 1/8" (3.175mm) nominal thickness. The tile shall be<br />
constructed of fi rst quality laminated PVC, and shall be free from<br />
imperfections which detract from its appearance. The tile shall conform<br />
fully to ASTM F-1700, Class III, Type B furnished by <strong>Roppe</strong> <strong>Corporation</strong>,<br />
Fostoria, Ohio. All vinyl tile shall be of the _________ style (specify<br />
pattern), ________ (straight or beveled edge) and of 1/8" (3.175mm)<br />
thickness. The tile shall be ____________ (3" x 36" {76.2mm x 914.4mm}<br />
planks and 12" x 12" {304.8mm x 304.8mm} and 18" x 18" {457.2mm<br />
x 457.2mm} square tiles) and in the __________ (insert color) color<br />
selected.<br />
PRODUCT SPECIFICATIONS<br />
Size: 3" x 36" (76.2mm x 91.4cm)<br />
12" x 12" (304.8mm x 304.8mm)<br />
18" x 18" (457.2mm x 457.2mm)<br />
Thickness: 1/8" (3.175mm)<br />
No. per carton: 60 – 3" x 36"<br />
45 – 12" x 12"<br />
20 – 18" x 18"<br />
Wt. per carton: 42 lbs. (19.05kg)<br />
Sq. ft. per carton: 45 (4.18 sq. m)<br />
roppe safeTcork ® vinyl tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
<strong>Roppe</strong> SafeTcork ® Vinyl Tile shown in the fi nish schedule or listed herein as<br />
<strong>Roppe</strong> _____ (insert design name {SAFETCORK OR SAFETCORK<br />
OPTIONS}) VINYL TILE shall be 0.080" (2 mm) in nominal thickness.<br />
The solid vinyl tile should conform fully to the requirements of Standard<br />
Specifi cations Type ASTM F 1700, Specifi cation for Solid Vinyl Tile: Class I,<br />
Type A; Federal Specifi cation SS-T-312B, Type III furnished by <strong>Roppe</strong><br />
<strong>Corporation</strong>, Fostoria, Ohio. Each shall be constructed of fi rst-quality<br />
materials and shall be smooth and free from imperfections which detract<br />
from its appearance, and contain no asbestos fi ber. Solid Vinyl tile shall be<br />
__________ (12" x 12" {304.8mm x 304.8mm}, 24" x 24" {609.6mm x 609.6mm}<br />
or 36" x 36" {914.4mm x 914.4mm}) in size and in the color __________<br />
stated and in either _______ (insert Straight or Pre-Grooved) Edge.<br />
roppe esd static conductive<br />
control solid vinyl tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
The solid, homogeneous ESD Conductive Static Control Solid<br />
Vinyl Tile shown in the fi nish schedule or listed herein shall be<br />
<strong>Roppe</strong> ESD CONDUCTIVE STATIC CONTROL FLOORING as<br />
manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. It shall be<br />
constructed of fi rst-quality materials and shall be smooth and free<br />
from imperfections which detract from its appearance. The ESD<br />
Static Control solid vinyl tile, Conductive, shall conform to ASTM<br />
F-1700, Class 1, Type A. The resistance of the ESD Conductive<br />
Static Control Flooring shall be less than an average of 1,000,000<br />
ohms and shall be more than an average of 25,000 ohms as<br />
tested in accordance with NFPA 99 2-6.3.8, ASTM F-150, UL 779,<br />
and ANSI/ESD S7.1 at 10 volts or 100 volts. The tile shall be 1/8"<br />
(3.175mm) in thickness and of size _______ (specify 12" x 12"<br />
{304.8mm x 304.8mm}, 24" x 24" {609.6mm x 609.6mm}, or<br />
36" x 36" {914.4mm x 914.4mm}) and in color ______ (specify color<br />
number and name). {Note: For specifi cations in areas where the<br />
installation is to be heat welded, state as follows: “The tile shall be<br />
formulated and pre-grooved for <strong>Roppe</strong> Unitized Installation.”}<br />
*<strong>Roppe</strong> ROP605 or ROP604 ESD adhesive must be used with this product.<br />
<strong>Roppe</strong> vinyl welding beads, .160" in diameter, are available in matching colors.<br />
roppe esd static dissipative<br />
control solid vinyl tile<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
The solid, homogeneous ESD Static Dissipative Control Solid Vinyl<br />
Tile shown in the fi nish schedule or listed herein shall be <strong>Roppe</strong><br />
ESD DISSIPATIVE STATIC CONTROL FLOORING as manufactured<br />
by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. It shall be constructed<br />
of fi rst-quality materials and shall be smooth and free from<br />
imperfections which detract from its appearance. The ESD<br />
Static Control solid vinyl tile, Dissipative, shall conform to<br />
ASTM F-1700, Class 1, Type A. The resistance of the tile will be<br />
higher than the average of 1,000,000 ohms and less than the<br />
average of 100,000,000 ohms as tested in accordance with<br />
NFPA 99 2-6.3.8, ASTM F-150, UL 779, and ANSI/ESD S7.1.<br />
The tile shall be 1/8" (3.175mm) in thickness and of size _______<br />
(specify 12" x12" {304.8mm x 304.8mm}, 24" x 24" {609.6mm x<br />
609.6mm}, or 36" x 36" {914.4mm x 914.4mm}) and in color ______<br />
(specify color number and name). {Note: For specifi cations in<br />
areas where the installation is to be heat welded, state as follows:<br />
“The tile shall be formulated and pre-grooved for <strong>Roppe</strong> Unitized<br />
Installation.”}<br />
*<strong>Roppe</strong> ROP605 or ROP604 ESD adhesive must be used with this product.<br />
<strong>Roppe</strong> vinyl welding beads, .160" in diameter, are available in matching colors.<br />
PRODUCT SPECIFICATIONS<br />
Size: 12" x 12" (304.8mm x 304.8mm)<br />
24" x 24" (61cm x 61cm)<br />
36" x 36" 36" (91.4cm (91.4cm x 91.4cm) 91.4cm)<br />
Thickness: 1/8" (3.175mm)<br />
No. per carton: 45 – 12" x 12"<br />
14 – 24" x 24"<br />
6 – 36" x 36"<br />
Wt. per carton: 54 lbs. – 12" x 12"<br />
63 lbs. – 24" x 24"<br />
43 lbs. – 36" x 36"<br />
Sq. ft. per carton: 45 (4.18 sq. m)<br />
1.800.537.9527 | roppe.com<br />
71
<strong>Roppe</strong> <strong>Corporation</strong>, U.S.A.<br />
1602 North Union Street<br />
Fostoria, Ohio 44830-1158<br />
1.800.537.9527 | 419.435.8546<br />
Fax: 419.435.1056<br />
roppe.com<br />
E-mail: sales@roppe.com<br />
©<strong>2009</strong> <strong>Roppe</strong> <strong>Corporation</strong> | Printed in the USA
72<br />
rubber stair treads<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All stair treads indicated in the finish schedule or otherwise listed in this specification shall be MOLDED RUBBER<br />
STAIR TREADS, manufactured by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. The treads shall be homogeneously constructed<br />
of first-quality resilient rubber compound and the color (and marbleization, if applicable) shall extend throughout the<br />
thickness of the tread. All treads shall be free from objectionable odors, blisters, cracks and other imperfections which<br />
will detract from the serviceability and appearance of the treads. Stair treads shall conform to ASTM F-2169, Type TS,<br />
Composition A, Types 1, 2 and 4. The molded rubber stair treads shall be type ______________ (insert number and name)<br />
and shall be ______________ (insert thickness). They shall have ______________ (round or square) nosing and a length of<br />
______________ [72" (1.83m) maximum standard, or special orders up to 9 ft. (2.73m) (styles #30 and #98 only)].<br />
The color shall be ______________ (specify by number and name).<br />
rubber stair treads compliance guide<br />
Part Design Nose Type ADA - ADA - Static Coefficient NFPA & ASTM ANSI A117.1- California Title 24, Relief Cut Tapered<br />
Nose Stair Treads of Friction (COF) (See below for details) 2003 (See below Section 3306(r) Nose<br />
for details) (See below for details)<br />
30 Diamond Square C C C A Y Y<br />
31 Diamond Round C C A<br />
40 Heavy-Duty Abrasive Strip Square C C<br />
41 Heavy-Duty Abrasive Strip Round C C<br />
50 Light-Duty Abrasive Strip Square C C N/A<br />
51 Light-Duty Abrasive Strip Round C C N/A<br />
60 Heavy-Duty Smooth Square C C A<br />
61 Heavy-Duty Smooth Round C C A<br />
70 Light-Duty Smooth Square C C A N/A<br />
71 Light-Duty Smooth Round C C A N/A<br />
80 Light-Duty Ribbed Square C C A N/A<br />
81 Light-Duty Ribbed Round C C A N/A<br />
92 Low Profile Raised Circular Design Square C C C A Y Y<br />
93 Textured Design Square C C A N/A Y<br />
94 Raised Square Design Square C C A Y<br />
95 Hammered Design Square C C A Y<br />
96 Raised Circular Vantage with Riser Square C C C A Y Y<br />
97 Raised Circular Vantage with<br />
Extended Depth Square C C C A Y<br />
98 Raised Circular Vantage without Riser Square C C C A Y Y<br />
A = Style available with abrasive steps (special order). C = Meets compliance standards. Y = Style available.<br />
product specifications<br />
All product dimension measurements are<br />
nominal in accordance with ASTM standards.<br />
product<br />
S P E C I F I C A T I O N S
oppe raised and smooth design rubber stair treads<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All fl oors shown in the fi nish schedule or listed in this specifi cation shall be <strong>Roppe</strong> _______(profi le number) RAISED DESIGN RUBBER STAIR<br />
TREADS as furnished by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. <strong>Roppe</strong> Raised Design Rubber Stair Treads shall be homogeneous in construction<br />
of fi rst quality materials, properly vulcanized, and shall be smooth and free of imperfections which detract from its appearance and contain<br />
no asbestos fi ber. The Rubber Stair Tread shall conform fully to all the requirements of Standard Specifi cation ASTM F-2169, Type TS. Rubber<br />
Stair Tread shall be _____ (1/8" {3.175mm}, 3/16" {4.76mm}, 13/64" {5.15mm} or 1/4" {6.35mm}) nominal thickness shall conform to industry<br />
standards and shall contain no asbestos fi ber. Raised Design Rubber Stair Treads shall be 72" (1.83m) in length, or up to 9' {2.73m} maximum<br />
standard in Style #30 Diamond Square Nose, #93 Textured Design and #98 Raised Circular Vantage Design Tread without riser, and in the<br />
_________ color shade selected in either square or round nose.<br />
abrasive strip design & smooth design rubber stair treads<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All fl oors shown in the fi nish schedule or listed in this specifi cation shall be _______ (1/8" {3.175mm}, 3/16" {4.76mm} or 1/4" {6.35mm}<br />
nominal thickness shall conform to industry standards and shall contain no asbestos fi ber. Abrasive Strip Design & Smooth Design Rubber<br />
Stair Treads shall be ____ (72" {1.83m}) in length and in the _________ color shade selected in either square or round nose.<br />
roppe fi esta ® rubber stair treads<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c area shall be ROPPE FIESTA ® RUBBER STAIR TREAD as<br />
furnished by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. <strong>Roppe</strong> Fiesta Rubber Stair Treads shall be homogeneous in construction of fi rst<br />
quality materials, properly vulcanized, and shall be smooth and free of imperfections which detract from its appearance and contain<br />
no asbestos fi ber. The Fiesta Rubber Stair Tread shall conform fully to all the requirements of Standard Specifi cation ASTM F-2169, Type TS,<br />
Class 2 (Patterned), Group 1 (Abrasive) and Group 2 (contrast for visually impaired). The Fiesta molded rubber stair treads shall be _______<br />
(insert name and number) and shall be _____ in thickness (insert thickness). They shall have square nosing and a length of ______ (insert length<br />
- 36" {.91m}, 42" {1.07m}, 48" {1.22m}, 54" {1.37m}, 60" {1.52m}, 72 {1.83m}, or special order up to 108" {2.73m} for style #98 only). The color<br />
shall be _______ (specify by name and number).<br />
roppe safeTcork ® rubber stair treads<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c area shall be ROPPE SAFETCORK ® RUBBER STAIR TREAD<br />
as furnished by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. <strong>Roppe</strong> SafeTcork Rubber Stair Treads shall be homogeneous in construction of fi rst quality<br />
materials, properly vulcanized, and shall be smooth and free of imperfections which detract from its appearance and contain no asbestos<br />
fi ber. The SafeTcork Rubber Stair Tread shall conform fully to all the requirements of Standard Specifi cation ASTM F-2169, Type TS, Class 2<br />
(Patterned), Group 1 (Abrasive) and Group 2 (contrast for visually impaired). The SafeTcork molded rubber stair treads shall be_______ (insert<br />
name and number) and shall be _____ in thickness (insert thickness). They shall have square nosing and a length of ______ (insert length - 36"<br />
{.91m}, 42" {1.07m}, 48" {1.22m}, 54" {1.37m}, 60" {1.52m}, 72" {1.83m}, or special order up to 108" {2.73m} for style #98 only). The color shall<br />
be _______ (specify by name and number).<br />
roppe vinyl stair treads<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All stair treads listed in the fi nished schedule or listed in the specifi cation as Vinyl Stair Treads shall be ROPPE VINYL STAIR TREADS as<br />
furnished by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. The treads shall be homogeneously constructed of fi rst-quality raw material, and shall be<br />
smooth and free of imperfections which detract from its appearance and contain no asbestos fi ber. The treads shall conform fully with ASTM<br />
F-2169; Standard Specifi cation for Resilient Stair Treads: Type TV; Class 2; Group 1 & 2. The vinyl treads shall be type ________ (insert number<br />
and name) and shall be 5/32" {3.968mm}, 1/4" {6.35mm} nominal thickness. They shall be _____ (specify round or square nose), and nominal<br />
length of ______ (specify length) in the color selected (specify color).<br />
roppe metal stair treads<br />
ARCHITECTS’ MATERIAL SPECIFICATIONS<br />
All aluminum treads shown in the fi nish schedule or listed in this specifi cation for heavy traffi c area shall be ROPPE METAL STAIR TREADS as<br />
furnished by <strong>Roppe</strong> <strong>Corporation</strong>, Fostoria, Ohio. <strong>Roppe</strong> Metal Stair Treads aluminum base shall be constructed of heat treated exterior grade<br />
aluminum 6063T3 and fi lled with a UV stable, chemical-resistant, closed-cell, anti-slip epoxy coating combined with mineral abrasive grits that<br />
are uniform throughout providing anti-slip properties and construction of fi rst quality materials, and shall be smooth and free of imperfections<br />
which detract from its appearance and contain no asbestos fi ber. <strong>Roppe</strong> Metal Stair Treads shall be .250" (6.35 mm) nominal thickness, shall<br />
conform to industry standards. <strong>Roppe</strong> Metal Stair Treads shall be .250" (6.35mm) in nominal thickness, ___ (mm) in nominal depth, ______<br />
(mm) in nominal length and in either single color or color combinations __________ stated.<br />
3.0" 10.0"<br />
36.0"<br />
10.0" 10.0" 3.0"<br />
48.0"<br />
2" 11.0" 11.0" 11.0" 11.0"<br />
9.0"<br />
1 5 ⁄8"<br />
1 1 ⁄2"<br />
2"<br />
1.800.537.9527 | roppe.com<br />
73
ubber raised circular<br />
vantage design<br />
#96 RAISED CIRCULAR VANTAGE DESIGN<br />
ONE-PIECE TREAD AND RISER*<br />
Length: 36" (.91m) to 108" (2.73m)<br />
Depth: 20-1/2" (520.7mm) nominal from inside<br />
of nose to 5/64" (1.98mm) nominal<br />
Thickness: 1/4" (6.35mm) nominal tread portion,<br />
riser tapers<br />
Nose Length: 1-9/16" (39.70mm) nominal<br />
Nose Thickness: 3/16" (4.76mm) nominal<br />
Tapered Nose: Yes<br />
Relief Cut Nose: Yes<br />
PACKAGING:<br />
No. per carton: 6<br />
Wt. per linear ft.: 2.5 lbs (3.73kg per linear meter)<br />
5/64"<br />
5 ⁄64"<br />
20 1 ⁄2"<br />
1 5 ⁄64"<br />
3 ⁄64" Raised Disk<br />
1 9 ⁄16"<br />
#97 EXTENDED LENGTH VANTAGE DESIGN*<br />
Length: 36" (.91m) to 72" (1.83m)<br />
Depth: 15" (381mm) nominal from<br />
inside of nose.<br />
Thickness: 1/4" (6.35mm) tapering to<br />
3/32" (2.41mm) nominal<br />
Nose Length: 1-9/16" (39.70mm) nominal<br />
Nose Thickness: 3/16" (4.76mm) nominal<br />
Tapered Nose: Yes<br />
Relief Cut Nose: Yes<br />
PACKAGING:<br />
No. per carton: 6<br />
Wt. per linear ft.: 2 lbs (2.98kg per linear meter)<br />
1 ⁄4"<br />
3 ⁄64" Raised Disk<br />
1 9 ⁄16"<br />
1 5 ⁄64"<br />
15"<br />
#98 VANTAGE PROFILE W/O RISER*<br />
Length: 36" (.91m) to 108" (2.73m)<br />
Depth: 12" (304.8mm) nominal from<br />
inside of nose.<br />
Thickness: 3/16" (4.76mm) tapering to<br />
1/8" (3.175mm) nominal<br />
Nose Length: 1-9/16" (39.70mm) nominal<br />
Nose Thickness: 1/8" (3.18mm) nominal<br />
Tapered Nose: Yes<br />
Relief Cut Nose: Yes<br />
1 ⁄4"<br />
3 ⁄32"<br />
PACKAGING:<br />
No. per carton: 6 treads per carton up to 72"<br />
(1.83m) nominal four treads per carton<br />
for lengths greater than six feet<br />
Wt. per linear ft.: 2 lbs (2.98kg per linear meter)<br />
1 ⁄8"<br />
Trim Mark<br />
12"<br />
74 product specifications<br />
All product dimension measurements are<br />
nominal in accordance with ASTM standards.<br />
product<br />
S P E C I F I C A T I O N S<br />
1 9 ⁄16"<br />
3 ⁄16"<br />
5/64 "<br />
low profile<br />
#92 LOW PROFILE RAISED CIRCULAR DESIGN*<br />
Length: 36" (.91m) to 72" (1.83m)<br />
Depth: 12-5/8" (311.2mm) nominal from<br />
inside of nose.<br />
Thickness: 3/16" (4.76mm) tapering to 1/8"<br />
(3.175mm) nominal<br />
Nose Length: 1-9/16" (39.70mm) nominal<br />
Nose Thickness: 9/64" (3.57mm) nominal<br />
Tapered Nose: Yes<br />
Relief Cut Nose: Yes<br />
PACKAGING:<br />
No. per carton: 6<br />
Wt. per linear ft.: 1.5 lbs (2.24kg per linear meter)<br />
13/64"<br />
textured profile<br />
13/64 "<br />
1 9 ⁄16"<br />
1 9 ⁄16"<br />
12 5 ⁄8"<br />
#93 TEXTURED DESIGN TREADS*<br />
Length: 36" (.91m) to 108" (2.73m)<br />
Depth: 12-5/8" (314.3mm) nominal<br />
from inside of nose.<br />
Thickness: 13/64" (5.15mm) tapering to<br />
7/32" (5.5mm) nominal.<br />
Nose Length: 1-9/16" (39.70mm) nominal<br />
Nose Thickness: 5/32" (3.97mm) nominal<br />
Tapered Nose: Yes<br />
Relief Cut Nose: No<br />
12 5 ⁄8"<br />
hammered profile<br />
5/32"<br />
PACKAGING:<br />
No. per carton: 6 treads per carton up to 72"<br />
(1.83m) nominal, four treads per<br />
carton for lengths greater than<br />
six feet<br />
Wt. per linear ft.: 1.7 lbs (2.51kg per linear meter)<br />
20 3 ⁄8"<br />
1 9 ⁄16"<br />
5/32"<br />
#95 HAMMERED SQUARE NOSE ONE-PIECE<br />
TREAD AND RISER*<br />
Length: 36" (.91m) to 72" (1.83m)<br />
Depth: 20-3/8" (520.7cm) nominal<br />
from inside of nose<br />
Thickness: 13/64" (5.16mm) stair tread,<br />
riser tapers to 5/64" (1.98mm) nominal<br />
Nose Length: 1-9/16" (39.70mm) nominal<br />
Nose Thickness: 1/8" (3.18mm) nominal<br />
Tapered Nose: Yes<br />
Relief Cut Nose: No<br />
PACKAGING:<br />
No. per carton: 6<br />
Wt. per linear ft.: 2.5 lbs (3.73kg per linear meter)<br />
Not available in 9 foot (2.73m) lengths<br />
All lengths are nominal<br />
* Abrasive strips can be added to rubber treads:<br />
#30, #31, #80, #81, #92, #93, #94, #95, #96, #97 and #98.
1 ⁄4"<br />
3 ⁄16"<br />
1 9 ⁄16"<br />
diamond<br />
#30 SQUARE NOSE DESIGN TREADS*<br />
Length: 36" (.91 m) to 108" (2.73m)<br />
Depth: 12" (304.8mm) nominal from<br />
inside of nose<br />
Thickness: 3/16" tapering to 1/8"<br />
(4.76mm to 3.175mm) nominal<br />
Nose Length: 1-9/16" (39.70mm) nominal<br />
Nose Thickness: 1/8" (3.175mm) nominal<br />
Tapered Nose: Yes<br />
Relief Cut Nose: Yes<br />
PACKAGING:<br />
No. Per Carton: 6 per carton up to 72" (1.83 m) nominal,<br />
4 treads per carton for lengths greater<br />
than six feet<br />
Wt. per linear ft: 2.25 lbs (3.35kg per linear meter)<br />
#31 ROUND NOSE DESIGN TREADS*<br />
Length: 36" (.91 m) to 72" (1.83m)<br />
Depth: 12" (304.8mm) nominal from inside of nose.<br />
Thickness: 1/4" tapering to 3/16" (6.35mm to 4.76mm)<br />
nominal<br />
Nose Length: 1-3/8" (34.93mm) nominal<br />
Nose Thickness: 7/64" (2.78mm) nominal<br />
Tapered Nose: No<br />
Relief Cut Nose: No<br />
PACKAGING:<br />
No. per carton: 6<br />
Wt. per linear ft: 2.25 lbs (3.35kg per linear meter)<br />
4 treads per carton for lengths greater<br />
than six feet.<br />
13 1 ⁄4"<br />
⁄8"<br />
3 ⁄16"<br />
#31 DIAMOND RD NOSE<br />
12"<br />
3 ⁄4" Radius<br />
#30 DIAMOND SQ NOSE<br />
12"<br />
1 9 ⁄16"<br />
abrasive strip<br />
#40 HEAVY-DUTY SQ NOSE<br />
1 9 ⁄16" 12 1 ⁄4"<br />
#50 LIGHT-DUTY SQ NOSE<br />
12 1 ⁄4"<br />
13 3<br />
⁄16" 1 ⁄4"<br />
⁄8"<br />
1 ⁄8"<br />
3 ⁄16"<br />
1 3 ⁄8"<br />
3 ⁄16"<br />
1 ⁄8"<br />
Trim mark on back to cut<br />
off where 3/16" tile will<br />
be flush.<br />
#40 & #41 HEAVY-DUTY ABRASIVE STRIP DESIGN TREADS<br />
Length: 36" (.91m) to 72" (1.83m) nominal<br />
Depth: 12-1/4" (311.2m) nominal from inside of nose<br />
Thickness: 1/4" (6.35mm) tapering to 3/16" (4.76mm) nominal<br />
Nose Length: #40 1-9/16" (39.70mm) nominal, #41 1-3/8" (34.93mm) nominal<br />
Nose Thickness: 3/16" (4.76mm) nominal<br />
Tapered Nose: No<br />
Relief Cut Nose: No<br />
#50 & #51 LIGHT-DUTY ABRASIVE STRIP DESIGN TREADS<br />
Length: 36" (.91m) to 72" (1.83m) nominal<br />
Depth: 12-1/4" (311.2m) nominal from inside of nose<br />
Thickness: 3/16" (4.76mm) tapering to 1/8" (3.175mm) nominal<br />
Nose Length: #50 1-9/16" (39.70mm) nominal, #51 1-3/8" (34.93mm) nominal<br />
Nose Thickness: 1/8" (3.175mm) nominal<br />
Tapered Nose: No<br />
Relief Cut Nose: No<br />
PACKAGING:<br />
No. Per Carton: Heavy-Duty: 6<br />
Light-Duty: 10<br />
Wt. per linear ft.: Heavy-Duty: 2.5 lbs. (3.73kg per linear meter)<br />
Light-Duty: 1.5 lbs. (2.24kg per linear meter)<br />
12"<br />
12"<br />
#41 HEAVY-DUTY RD NOSE<br />
3 ⁄4" Radius<br />
12"<br />
#51 LIGHT-DUTY RD NOSE<br />
3 ⁄4" Radius<br />
12"<br />
3 ⁄16"<br />
1 ⁄8"<br />
#94 RAISED SQUARE DESIGN*<br />
Length: 36" (.91m) to 72" (1.83m)<br />
Depth: 12-1/2" (311.2mm) nominal from<br />
inside of nose.<br />
Thickness: 1/4" (6.35mm) tapering to 1/8"<br />
(3.175mm) nominal<br />
Nose Length: 1-9/16" (39.70mm) nominal<br />
Nose Thickness: 1/4" (6.35mm) nominal<br />
Tapered Nose: No<br />
Relief Cut Nose: No<br />
PACKAGING:<br />
No. per carton: 6<br />
Wt per linear ft.: 2.2 lbs (3.28kg per linear meter)<br />
1 ⁄8"<br />
raised square<br />
rib<br />
12 1 ⁄4"<br />
1 5 ⁄8"<br />
1 9 ⁄16"<br />
1 ⁄32" Raised Square<br />
#80 LIGHT-DUTY RIB SQUARE NOSE<br />
Length: 36" (.91m) to 72" (1.83m) nominal<br />
Depth: 12-1/4" (311.2mm) nominal from<br />
inside of nose<br />
Thickness: 1/8" (3.175mm) tapering to .080"<br />
(2.03mm) nominal<br />
Length: 1-9/16" (39.70mm) nominal<br />
Nose Thickness: 1/8" (3.18mm) nominal<br />
Tapered Nose: No<br />
Relief Cut Nose: No<br />
1 ⁄4"<br />
PACKAGING:<br />
No. per carton: 10<br />
Wt. per linear ft.: 1.25lbs (1.87kg per linear meter)<br />
#81 LIGHT-DUTY RIB ROUND NOSE<br />
Length: 36" (.91m) to 72" (1.83m) nominal<br />
Depth: 12-1/4" (311.2mm) nominal from<br />
inside of nose<br />
Thickness: 1/8" (3.175mm) tapering to .080"<br />
(2.03mm) nominal<br />
Nose Length: 1-3/8" (34.93mm) nominal<br />
Nose Thickness: 9/64" (3.58mm) nominal<br />
Tapered Nose: No<br />
Relief Cut Nose: No<br />
PACKAGING:<br />
No. per carton: 10<br />
Wt per linear ft.: 1.25lbs (1.87kg per linear meter)<br />
1 ⁄8"<br />
1 9 ⁄16"<br />
1 ⁄8"<br />
1 3 ⁄8"<br />
#80 LIGHT-DUTY RIB SQ NOSE<br />
12 1 ⁄4"<br />
#81 LIGHT-DUTY RIB RD NOSE<br />
121 ⁄4"<br />
3 ⁄4" Radius<br />
.080"<br />
.080"<br />
1.800.537.9527 | roppe.com<br />
75
76 product specifi cations<br />
All product dimension measurements are<br />
nominal in accordance with ASTM standards.<br />
product<br />
S P E C I F I C A T I O N S
1 ⁄4"<br />
1 9 ⁄16"<br />
13 1 ⁄4"<br />
⁄8"<br />
3 ⁄16"<br />
1 9 ⁄16"<br />
3 ⁄16"<br />
1 3 ⁄8"<br />
3 ⁄4" Radius<br />
smooth<br />
#60, #61 – RUBBER DESIGN TREADS*<br />
Length: 36" (.91m) to 72" (1.83m) nominal<br />
Depth: 12" (304.8m) nominal from inside<br />
of nose<br />
Thickness: 1/4" (6.35mm) tapering to 3/16"<br />
(4.76mm) nominal<br />
Nose Length: #60 1-9/16" (39.70mm) nominal,<br />
#61 1-3/8" (34.93mm) nominal<br />
Nose Thickness: 3/16" (4.76mm) nominal<br />
Tapered Nose: No<br />
Relief Cut Nose: No<br />
#70, #71 – LIGHT-DUTY SMOOTH RUBBER TREADS<br />
Length: 36" (.91m) to 72" (1.83m) nominal<br />
Depth: 12-1/4" (311.2m) nominal<br />
from inside of nose<br />
Thickness: 3/16" (4.76mm) tapering to 1/8"<br />
(3.175mm) nominal<br />
Nose Length: #70 1-9/16" (39.70mm) nominal,<br />
#71 1-3/8" (34.93mm) nominal<br />
Nose Thickness: 1/8" (3.175mm) nominal<br />
Tapered Nose: No<br />
Relief Cut Nose: No<br />
#60 HEAVY-DUTY SQ NOSE<br />
12"<br />
#61 HEAVY-DUTY RD NOSE<br />
12"<br />
#70 LIGHT-DUTY SQ NOSE<br />
3 ⁄4" Radius<br />
12 1 ⁄4"<br />
#71 LIGHT-DUTY RD NOSE<br />
12 1 ⁄4"<br />
3 ⁄16"<br />
3 ⁄16"<br />
* 2" Abrasive strips can be added to rubber treads: #60 and #61.<br />
1 ⁄8"<br />
1 ⁄8"<br />
vinyl stair treads<br />
5/32"<br />
3/32"<br />
15/64"<br />
15/64"<br />
29/32"<br />
2" 5/32"<br />
2"<br />
13/16"<br />
5/32"<br />
1/4"<br />
1/4"<br />
light-duty rib<br />
#16 & #17 – LIGHT-DUTY RIB TREAD<br />
Length: 42" (1.07m), 48" (1.22m)<br />
or 72" (1.83m)<br />
Depth: 12-13/32" (315.12mm)<br />
Thickness:<br />
PACKAGING:<br />
5/32" (3.96mm) to 5/64" (1.984mm)<br />
No. per carton: 10<br />
Wt. per ft.: 1.30 lb. (0.59kg per m)<br />
heavy-duty rib<br />
#18 & #19 – HEAVY-DUTY RIB TREAD<br />
Length: 42" (1.07m), 48" (1.22m)<br />
or 72" (1.83m)<br />
Depth: 12-1/2" (317.5mm)<br />
Thickness:<br />
PACKAGING:<br />
1/4" (6.35mm) to 1/8" (3.175mm)<br />
No. per carton: 6<br />
Wt. per ft.: 1.80 lbs. (0.816kg per m)<br />
#16 LIGHT-DUTY SQ NOSE<br />
12-13/32"<br />
#17 LIGHT-DUTY SQ NOSE<br />
12-11/32"<br />
#18 HEAVY-DUTY SQ NOSE<br />
12-1/2"<br />
#19 HEAVY-DUTY SQ NOSE<br />
12-1/2"<br />
5/64"<br />
5/64"<br />
1/8"<br />
1/8"<br />
1.800.537.9527 | roppe.com<br />
77
78<br />
adhesives<br />
Tread Epoxy Caulking-Cartridge<br />
CECCXP000-420 (13.5 oz. / 25 L/F)<br />
#205 Cove Base Adhesive<br />
62 L/F per Cartridge<br />
275 L/F Base per Gallon<br />
#210 Cove Base Adhesive<br />
62 L/F per Cartridge<br />
275 L/F Base per Gallon<br />
#319 Stair Tread Adhesive (non-fl ammable)<br />
90 to 120 S/F per Gallon<br />
For Two Surfaces<br />
110 to 135 S/F per Gallon – Single surface application<br />
#375 Rubber & Vinyl Tile Adhesive<br />
125 to 245 S/F per Gallon<br />
#435 Flooring Epoxy Adhesive (non-fl ammable)<br />
125 to 245 S/F per Gallon<br />
#445 Rop-Cord Adhesive<br />
70-75 S/F per Gallon<br />
product specifi cations<br />
All product dimension measurements are<br />
nominal in accordance with ASTM standards.<br />
product<br />
S P E C I F I C A T I O N S<br />
#535U Universal (Two-Component) Urethane<br />
Enhanced Epoxy Adhesive.<br />
75 to 175 S/F per Gallon<br />
#R604 Single Part ESD Adhesive<br />
125-185 S/F per Gallon<br />
#R605 Two-component ESD Adhesive<br />
125-150 S/F per Gallon<br />
#635 Solvent Free Moisture Cured Polyurethane Adhesive<br />
75-100 S/F per Gallon<br />
Acrylic Latex Caulk<br />
Available in colors to match all products<br />
12LF 1/4" bead<br />
All coverages are approximate which can vary due to type of product, substrate, type<br />
of installation and recommended trowel size. For more information go to roppe.com.
all products<br />
1 - Y E A R L I M I T E D W A R R A N T Y<br />
<strong>Roppe</strong> products are warranted for a period of one (1) year<br />
from date of installation to be free of defects in material<br />
and workmanship on all first quality products. Limited Wear<br />
Warranty also applies to specific products for non-transit use,<br />
based by product design and installation purpose, if installed,<br />
maintained and used strictly in accordance with <strong>Roppe</strong>’s<br />
written instructions and installed with the recommended<br />
<strong>Roppe</strong> Adhesive. Refer to <strong>Roppe</strong> Product 10-Part Specification<br />
Sheet before proceeding with installation. For any applications<br />
not listed, do not proceed with installation regardless of the<br />
circumstance. It is the Flooring Installer’s direct responsibility<br />
to inspect and loose lay the flooring in the room or area<br />
prior to installation to determine the proper layout and best<br />
overall appearance. Flooring Installer must inspect all material<br />
for manufacturing imperfections and irregularities prior to<br />
installation. All manufacturing imperfections or irregularities<br />
must be reported to the appropriate authority. Any defective<br />
material will be replaced at no charge, if the defect is found<br />
prior to installation. <strong>Roppe</strong> will not be liable for labor costs for<br />
material that is installed with manufacturing imperfections and<br />
irregularities. <strong>Roppe</strong> reserves the right to inspect the manner<br />
and quality of installation of its product claimed defective. In<br />
<strong>Roppe</strong> <strong>Corporation</strong>, U.S.A.<br />
1602 North Union Street<br />
Fostoria, Ohio 44830-1158<br />
1.800.537.9527<br />
419.435.8546<br />
Fax: 419.435.1056<br />
roppe.com<br />
E-mail: sales@roppe.com<br />
© <strong>2009</strong> <strong>Roppe</strong> <strong>Corporation</strong>. Printed in the U.S.A.<br />
<strong>Roppe</strong> is proud to be a member of the following<br />
organizations, committed to the advancement of<br />
excellence in their fields:<br />
<strong>Roppe</strong> is a member of the U.S. Green Building Council,<br />
which promotes buildings that are environmentally<br />
responsible. Visit usgbc.com for details.<br />
Dedicated to protecting life and promoting<br />
health in our environments, both at work<br />
and home/community.<br />
Craftsman trained to stress attention to<br />
detail, respect for project specifications,<br />
and superior workmanship.<br />
no event shall <strong>Roppe</strong> be liable for incidental or consequential<br />
damages, even if some other provision of this Limited Warranty<br />
is unenforceable. <strong>Roppe</strong> will not be liable for labor costs or lost<br />
profits resulting from the use of or inability to use the product.<br />
<strong>Roppe</strong> shall have no liability whatsoever to Buyer in the event<br />
the goods become defective if such defect is caused in whole<br />
or part by cuts, tears, vandalism, fire, willful destruction,<br />
damage from high heels, spiked footwear, improper installation,<br />
improper maintenance, subfloor and/or substrate irregularities,<br />
accidents, natural causes, or acts of God. <strong>Products</strong> designated<br />
as “seconds”, “mill run”, “non-conforming”, not being of<br />
first quality, are sold as-is and <strong>Roppe</strong> makes no warranties<br />
whatsoever, expressed or implied, with respect thereto,<br />
including warranties of merchantability or fitness for a particular<br />
use. These warranties are expressly in lieu of any other<br />
warranties expressed or implied. <strong>Roppe</strong> products not designed<br />
for use in or near commercial kitchens. <strong>Roppe</strong> products are not<br />
designed for outdoor installations, unless specifically noted.<br />
Contact <strong>Roppe</strong> for limitations, exclusions and additional<br />
warranty details. Or for 10-Part Specification Sheets and<br />
warranty information, visit our Web site at roppe.com.<br />
79