MARKS PUBLISHED FOR OPPOSITION

TM 316 OFFICIAL GAZETTE JANUARY 11, 2005
CLASS 12—(Continued).
SN 76-514,585. ANSWER PRODUCTS, INC., VALENCIA, CA.
FILED 5-14-2003.
OWNER OF U.S. REG. NOS. 1,764,635 AND 2,073,318.
FOR PARTS FOR MOUNTAIN BICYCLES, NAMELY,
FRONT SUSPENSION FORKS, AND REAR SHOCK
ABSORBERS; AND PARTS FOR MOTORCYCLES,
NAMELY, FRONT SUSPENSION FORKS, REAR SHOCK
ABSORBERS, FRONT SUSPENSION KITS FOR CON-
TROLLING SUSPENSION COMPRESSION AND RE-
BOUND ACTION COMPRISING COIL SPRINGS, FORK
SEALS, RODS USED WITH THE COIL SPRINGS TO
DAMPEN OBJECTIONABLE SPRING OSCILLATIONS,
PISTONS AND METAL SHIMS, REAR SHOCK ABSOR-
BER KITS FOR CONTROLLING SUSPENSION, COM-
PRESSION AND REBOUND ACTION, COMPRISING
COIL SPRINGS, FORK SEALS, RODS USED WITH THE
COIL SPRINGS TO DAMPEN OBJECTIONABLE SPRING
OSCILLATIONS, PISTONS AND METAL SHIMS, FRONT
FORK COIL SPRINGS, REAR SHOCK COIL SPRINGS,
MOTORCYCLE FRAMES, SWING ARM WHICH IS A
PIVOTING FRAME MEMBER THAT HOLDS THE REAR
WHEEL AND ALLOWS THE MOTORCYCLE TO AB-
SORB BUMPS THROUGH ITS MOVEMENT, REAR
WHEEL AXLES, FRONT WHEEL AXLES, FORK TRIPLE
CLAMPS WHICH IS A YOKE THAT HOLDS THE TWO
FRONT SUSPENSION UNITS TO THE STEERING STEM
IN THE FRAME; HANDLEBARS, FRONT FORK OUTER
TUBES WHICH CONSTITUTE THE OUTERMOST TUBES
OF A TELESCOPING FRONT SUSPENSION UNIT THAT
SLIDES IN AN OVERLAPPING MANNER WITH THE
INNER TUBES OF THE FRONT SUSPENSION UNIT,
FRONT FORK INNER LEGS WHICH ARE THE INNER
TUBES OF A TELESCOPING FRONT SUSPENSION
UNIT THAT SLIDES IN AN OVERLAPPING MANNER
WITH THE OUTER TUBES OF THE FRONT SUSPEN-
SION UNIT (U.S. CLS. 19, 21, 23, 31, 35 AND 44).
NANCY CLARKE, EXAMINING ATTORNEY
CLASS 12—(Continued).
SN 76-514,587. ANSWER PRODUCTS, INC., VALENCIA, CA.
FILED 5-14-2003.
OWNER OF U.S. REG. NOS. 1,764,635 AND 2,073,318.
FOR PARTS FOR MOUNTAIN BICYCLES, NAMELY,
FRONT SUSPENSION FORKS, AND REAR SHOCK
ABSORBERS; AND PARTS FOR MOTORCYCLES,
NAMELY, FRONT SUSPENSION FORKS, REAR SHOCK
ABSORBERS, FRONT SUSPENSION KITS FOR CON-
TROLLING SUSPENSION COMPRESSION AND RE-
BOUND ACTION COMPRISING COIL SPRINGS, FORK
SEALS, RODS USED WITH THE COIL SPRINGS TO
DAMPEN OBJECTIONABLE SPRING OSCILLATIONS,
PISTONS AND METAL SHIMS, REAR SHOCK ABSOR-
BER KITS FOR CONTROLLING SUSPENSION, COM-
PRESSION AND REBOUND ACTION, COMPRISING
COIL SPRINGS, FORK SEALS, RODS USED WITH THE
COIL SPRINGS TO DAMPEN OBJECTIONABLE SPRING
OSCILLATIONS, PISTONS AND METAL SHIMS, FRONT
FORK COIL SPRINGS, REAR SHOCK COIL SPRINGS,
MOTORCYCLE FRAMES, SWING ARM WHICH IS A
PIVOTING FRAME MEMBER THAT HOLDS THE REAR
WHEEL AND ALLOWS THE MOTORCYCLE TO AB-
SORB BUMPS THROUGH ITS MOVEMENT, REAR
WHEEL AXLES, FRONT WHEEL AXLES, FORK TRIPLE
CLAMPS WHICH IS A YOKE THAT HOLDS THE TWO
FRONT SUSPENSION UNITS TO THE STEERING STEM
IN THE FRAME; HANDLEBARS, FRONT FORK OUTER
TUBES WHICH CONSTITUTE THE OUTERMOST TUBES
OF A TELESCOPING FRONT SUSPENSION UNIT THAT
SLIDES IN AN OVERLAPPING MANNER WITH THE
INNER TUBES OF THE FRONT SUSPENSION UNIT,
FRONT FORK INNER LEGS WHICH ARE THE INNER
TUBES OF A TELESCOPING FRONT SUSPENSION
UNIT THAT SLIDES IN AN OVERLAPPING MANNER
WITH THE OUTER TUBES OF THE FRONT SUSPEN-
SION UNIT (U.S. CLS. 19, 21, 23, 31, 35 AND 44).
NANCY CLARKE, EXAMINING ATTORNEY
SN 76-542,836. TRUCK SHIELDS, LLC, SALT LAKE CITY,
UT. FILED 9-8-2003.
TRAIL SHIELDS
NO CLAIM IS MADE TO THE EXCLUSIVE RIGHT TO
USE "SHIELD", APART FROM THE MARK AS SHOWN.
FOR ADHERING PROTECTIVE AND DECORATIVE
COVERS FOR OUTER SURFACES OF OFF-ROAD VE-
HICLES (U.S. CLS. 19, 21, 23, 31, 35 AND 44).
FIRST USE 3-31-2003; IN COMMERCE 3-31-2003.
CHRISTOPHER BUONGIORNO, EXAMINING ATTOR-
NEY