6 PrimaryTillage 3710 Drawn Plow 3710 Drawn Plow Rigid or flex, these plows are big on strength, clearance, and performance With the 3710 Drawn Plow, 8x8-inch mainframes on both rigid and flex models let you bust through the toughest fields. They also help your plow maintain a more consistent depth and have less bounce during transport. The 3710 Drawn Flex Plow’s mainframe is hinged in the middle, so you can move nimbly over uneven terrain without gouging or scalping contours and low spots. And you’ll find this flex plow incredibly easy to steer, because the two-piece mainframe gives you one-piece turning. High clearance? Try a generous 34 inches of fore-and-aft clearance and 33 inches of underframe clearance. That’s plenty of room for heavy residue. Plus, the 3710 Drawn Plows let you fine-tune width of cut to match horsepower to field conditions. Both rigid and flex 3710 Plows feature light-draft bottoms. This unique design delivers excellent turnover, better scouring, and easier pulling. You’ll save fuel and frustration.
3710 Drawn Flex Plow This wide-body plow, available in 9- and 10-bottom models, is equally long on performance. The 3710 Flex Plow features a rugged hitch in the middle of the 8x8-inch mainframe. The twopiece frame conforms to contours, yet offers one-piece turning for easy maneuvering. Gauge and tail wheels add stability and depth control to the rear of the plow. And the gauge wheel is positioned close to the frame so you can plow next to fences. Adjustable width-of-cut flex model. Use the turnbuckle width-of-cut adjustment on your 3710 Flex Plow to match horsepower to field conditions. You can set width of cut at 16, 18, or 20 inches. 3710 Drawn Rigid Plow Available with 6, 7, or 8 bottoms for perfectly formed furrows in a variety of field conditions. The adjustable widthof-cut rigid model range of adjustment is 14 to 22 inches. A simple turnbuckle adjustment makes the job a breeze. Or for more convenience, choose hydraulic control for on-the-go adjustment. Flex models have Walk-Over Wheels to let you cross easily over residue piles, waterways, and dead furrows. They also cut down on bulldozing in soft soil and reduce tire wear by improving weight distribution. 3710 Specifications MODEL 3710 FLEX PLOW 3710 RIGID PLOW BOTTOMS Sizes 9- and 10-bottom 6-, 7- and 8-bottom Plow bottoms FRAME Size Hitch Clearance NU 16-in. (406 mm) or NU 18-in. (457 mm) heavy-duty full cut 8x8-in. (203x203 mm) box-beam steel frame 3-position on-land (one transport and two working positions) (at 18-in., 457 mm, width of cut): Fore and aft: 34 in. (864 mm); Underframe: 33.5 in. (851 mm) NU 16-in. (406 mm) heavy-duty full cut or NU 18-in. (457 mm) heavy-duty full cut 8x8-in. (203x203 mm) box-beam steel frame In-furrow: 6-bottom. On-land: 6-, 7-, or 8-bottom. Tractor must be equipped with clevis-type drawbar. Dual remote hydraulic cylinder controls required for base equipment. Additional control required for hydraulic width of cut Fore and aft: 34 in. (864 mm); Underframe: 33.5 in. (851 mm) MINIMUM HORSEPOWER 9-bottom 235 hp (175 kw) 235 hp (175 kw) 10-bottom STANDARDS / COULTERS 235 hp (175 kw) 235 hp (175 kw) Standards Safety-trip or spring-reset Safety-trip or spring-reset Coulters Shearbolt or cushion with 20-in. (508 mm) rippled blade standard; 20-in. (508 mm) plain and 22-in. (559 mm) rippled blades optional; Shearbolt or cushion with 20-in. (508 mm) rippled blade standard; 20-in. (508 mm) plain and 22-in. (559 mm) rippled blades optional; long coulter arm optional Width of cut long coulter arm optional Turnbuckle; 16, 18, and 20 in. (406, 457, and 508 mm) Infinitely variable: 14 to 22 in. (356 to 559 mm) APPROXIMATE TRANSPORT WIDTH 9-bottom 12 ft. 8 in. (3.7 m) — 10-bottom LANDING / WHEELS 13 ft. 8 in. (4.0 m) — Adjustable turnbuckle standard; Landing — Full castering front and rear customer-supplied hydraulic cylinder may be used on in-furrow models Wheels wheels, tandem Walk-Over land wheels — Tail Wheel — Castering rear-tail wheel with mechanical lockout Furrow Wheel TRASHBOARDS — Front, full castering SAFETY FEATURES Optional steel or plastic Optional steel or plastic SMV emblem, implement warning lights, safety chain (Specifications and design subject to change without notice.) PrimaryTillage 3710 Drawn Plow SMV emblem, implement warning lights, safety chain 7