Hamilton kettles, inc. - Cincinnati Industrial Auctioneers, Inc.

42” Karl Keilinghaus Type Hydroplane 60 Hydraulic Spinning
Lathe
1/2” X 120” Webb Model 9L Powered Initial Pinch Plate Bending
Rolls
3/4” X 12’ Pacific Model 750 HD12 Hydraulic Power Squaring
Shear
THURSDAY, AUGUST 3RD
STAINLESS STEEL KETTLE MANUFACTURER
Featuring: 42” Keilinghaus Spinning Lathe,
1/2” X 10’ Webb Roll, Kane & Roach Angle Roll,
3/4” X 12’ Pacific Shear, 175 Ton X 10’ Pacific Brake,
Thomas, Southwark & Hiles Jones C-Frame Dishing Presses,
Tank Fabricating Equipment, Weld Planisher,
Welding Equipment, Misc. Toolroom & Fabricating Machinery,
Bridge Cranes, Shop & Office Equipment
SURPLUS TO THE NEEDS OF
HAMILTON
KETTLES, INC.
2898 Birch Drive – Weirton, WV 26062
SALE DATE:
Thursday,
August 3rd
Starting at 9:00 AM
INSPECTION:
Wednesday, August 2nd
10:00 AM to 4:00 PM
Thomas Machine No. 2 C-Frame Mechanical
Power Tank Head Dishing Press
NEW NEW & & IMPROVED IMPROVED WEBSITE WEBSITE
www.cia-auction.com
New Features:
Photo Gallery, Recent Auction
Results, Staff Profiles
& Reference Information
Also Features:
Upcoming Sale Information,
Printable Color Brochures,
Printable Lot Losting Catalogs,
Downloadable Forms,
Complete Terms of Sale
175 Ton X 10’ Pacific Model K175-10
Hydraulic Power Press Brake
SALE UNDER THE MANAGEMENT OF
Cincinnati Industrial Auctioneers Inc.
Cincinnati Industrial Auctioneers Inc.
2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760
INTERNET: cia-auction.com for printable brochures, catalog, terms and pre-bidding

1/2” X 120” Webb Model 9L Powered Initial Pinch
Plate Bending Rolls
Thomas Machine No. 2 C-Frame Mechanical Power
Tank Head Dishing Press
Watson Stillman Hydraulic Straightening Press
25’ Hamilton Kettle Custom Built Portable Shop Built
Pipe Polisher
Chambersburg Cecostamp
Air Forging Hammer
THURSDAY, AUGUST 3RD - - 9:00 AM
4” X 4” X 1/2” Kane & Roach
Vertical Angle Bending Rolls
42” Karl Keilinghaus Type Hydroplane 60 Hydraulic Spinning Lathe
SPINNING LATHE
42” Karl Keilinghaus Type Hydroplane 60 Hydraulic Spinning
Lathe; S/N 1018-72, 90” X 130” T-Slotted Floor Plate, Hydraulic Tool Post
at 32 1/2” Travel, 15 HP Hydraulic Unit, 68” Diameter Face Plate, Console
Type Controls w/ Left - Right Longitude Slide, Lathe Used to Flange Over
Top of Kettles, 1,000 MM Longitudinal Slide, 300 MM Cross Slide, 0-
12,000 KP Longitudinal Slide Feed Force, 0 - 11,000 KP Cross Slide Feed
Force, 0 - 2 M/Min Feed Rates on Longitudinal & Cross Slides, The Above
Machine Can Be Used for Pressing, Shearing, Spinning, & Rollforming of
Tank Bottoms, Cones, & Lips SEE PHOTO
DISHING PRESSES
Thomas Machine No. 2 C-Frame Mechanical Power Tank Head
Dishing Press; S/N A4910, 72” Throat, 18” X 27” Pressing Base, 18”
Diameter Pressing Base, 10 HP, Air Clutch, (3) Corresponding Die Sets to be
Sold Separately SEE PHOTO
Southwark C-Frame Mechanical Power Tank Head Dishing
Press; S/N N/A, 48” Throat, 18” X 18” Pressing Base, 13” Diameter
Pressing Base, 30 HP, Air Clutch, (3) Corresponding Die Sets to be Sold
Separately
Hiles & Jones No. 4 C-Frame Mechanical Power Tank Head
Punch; S/N N/A, 48” Throat, 12” X 18” Pressing Base, 15 HP
TANK BOTTOM WELD FINISHER
Hamilton Kettles Custom Built Dual Head Hydraulic Press Type
Tank Bottom Weld Finisher; (1) No. 2 Pettingell Automatic Power
Hammer; Anvil 76” Above Floor Level, 33” Between Anvil & Column, 16
1/4” Between Upper & Lower Arms, 2 HP Direct Drive, Capacity Up to 66”
Diameter Kettle; (1) No. 1 Pettingell Automatic Power Hammer Anvil 43”
Above Floor Level, 14 1/4” Between Anvil & Column, 1 HP Belt Drive,
Capacity Up to 28” Diameter Kettle, System Mounted on 1/2” Thick X 84”
X 108” Steel Plate, System Designed for Press Type Finishing of the Outside
Surface of a Tank Bottom While in an Inverted Position
WELD PLANISHER
Hamilton Kettles Custom Built Vertical Stroke Hydraulic
Planisher; 112” Between Vertical Uprights, 20” Stroke of Ram, 5 HP
Hydraulic Unit, System Includes 5 Ton Overhead Crane, 192” Overall
Height, Machine Used to Smooth Inner Kettle Bottom Weld Seams
SEE PHOTO
2,000 LB Ransome Size 25P
Welding Positioner
POLISHING MACHINERY
25’ Hamilton Kettle Custom Built Portable Shop Built Pipe
Polisher; Equipped w/ 7 1/2 HP Vertical Polishing Head, Capacity to 8”
Diameter Head, 13” 3-Jaw Motorized Pipe Clamping & Rotation, Pneumatic
Polishing Head Controls, Chain Driven Polisher Head Controls
SEE PHOTO
20’ Hamilton Kettle Custom Built Track Mounted Flat Bar
Polishing Machine; 4” Wide Capacity, 15 HP GP Machinery Model XH-
2168-15 Polishing Head; S/N G5929
PLATE BENDING & ROLLS
1/2” X 120” Webb Model 9L Powered Initial Pinch Plate
Bending Rolls, 11” Roll Diameter, Hydraulic Drop End, Powered Rear
Roll Adjustment, 20 HP Main Drive Motor
1/4” X 60” Lown Initial Pinch Mechanical Power Plate Bending
Rolls; S/N N/A, 6” Roll Diameters, Manual Drop End, Manual Rear Roll
Adjustment, 5 HP Drive Motor SEE PHOTO
ANGLE BENDING ROLLS
4” X 4” X 1/2” Kane & Roach Vertical Angle Bending Rolls; S/N
204344, Job No. 6357, 4” X 4” X 1/2” Angle Capacity, 4 1/2” Wide X 7”
Diameter Rolls, Manual Top Roll Adjustment, 5 HP Drive Motor
SEE PHOTO
HYDRAULIC SHEAR
3/4” X 12’ Pacific Model 750 HD12 Hydraulic Power Squaring
Shear; S/N S10267, Hydraulic Power Back Gauge, Hold-Down Tonnage
Controls, 120” Squaring Arm, Foot Pedal
HYDRAULIC PRESS BRAKE
175 Ton X 10’ Pacific Model K175-10 Hydraulic Power Press
Brake; S/N 5885, 120” Bed & Ram, 100” Between Uprights, Power Back
Gauge, Foot Pedal SEE PHOTO
MISC. FABRICATING MACHINERY
Chambersburg Cecostamp Air Forging Hammer; S/N 11833, 24” X
30” Bolster, 24” X 24” Ram, 40” Ram Stroke SEE PHOTO
Quickwork-Whiting Model 40A Circle Shear; S/N 4SX34X117, 1/2”
Mild Steel Capacity, 48” Throat
48” Throat Floor Model Nibbler; 3 HP Drive Motor
STRAIGHTENING PRESS
Watson Stillman Hydraulic Straightening Press; S/N 7919, 20 HP
Hydraulic Unit, 24” X 180” T-Slotted Bed, 24” Ram Stroke, 5” Diameter
Ram SEE PHOTO
Aronson Model SG8VRA8CL-PK
Welding Manipulator
Hamilton Kettles Custom Built
Vertical Stroke Hydraulic
Planisher

WELDING MANUPULATORS &
POSITIONERS
Aronson Model SG8VRA8CL-PK Welding Manipulator; S/N 77332,
300 LB Capacity Each End, 96” Vertical Travel, 110” Max. Reach, 800 Amp
Lincoln Idealarc R3S-800 Power Source, Lincolnweld Sub-Arc Welding Head,
Pendant Controls SEE PHOTO
2,000 LB Ransome Size 25P Welding Positioner; S/N 656678, 52”
Face Plate, Power Tilt, Pendant Controls SEE PHOTO
WELDERS – ALL TYPES
(2) 350 Amp Lincoln Electric Invertec V350-Pro Wire Feed
Welders; S/N U1040718071 & U10410718058, LF-72 Wire Feeders w/ Foot
Pedals
(2) 350 Amp Lincoln Electric Invertec V350-Pro Wire Feed
Welders; S/N U10506686 & U1020509014, w/ LN-7 Wire Feeders, Foot
Pedals
355 Amp Lincoln Electric Square Wave AC/DC Tig & Stick
Welding Power Source; S/N U1971214764, Lincoln Magnum Radiator,
Foot Pedal.
400 Amp Miller Dimension 400 DC Arc Wire Feed Welding Power
Source; S/N KA832853, S-22A Wire Feeder
300 Amp Miller Direct Current Arc Welding Power Supply; S/N
S423147
800 Amp Lincoln Electric Model R3S-800 DC Power Source; S/N
AC411654
300 Amp Miller Model CP-300 Wire Feed DC Arc Welding Power
Source; S/N KA755727, S-21E Wire Feed
150 Amp Miller Model SR-150-32 Wire Feed Welder; S/N
HG019490, Foot Pedal
(4) 300 Amp Miller Arc Welding Power Supplies; S/N’s HE762028,
U504320, S423148, & S406470
300 Amp Miller Model MP-30E Wire Feed DC Arc Welding Power
Source; S/N JB515170, S-52D Millermatic Wire Feeder
PLASMA CUTTERS
Thermal Dynamics Model 100XL Plasma Cutter; S/N
0702GA191301D
Thermal Dynamics Model 75XL Plasma Cutter; S/N
082823A191501H
Miller Model Spectum 1000 Plasma Cutting System w/ Auto-Line;
S/N LF320115POTHER
TOOLROOM EQUIPMENT
24” X 84” Leblond Regal Geared Head Engine Lathe; S/N 4H-213,
12-720 RPM, 2 1/4” Spindle Hole, Taper Attachment, Tailstock, Steady Rest,
15” & 24” 3-Jaw Chucks SEE PHOTO
10” X 16” Kalamazoo Model 8-C-M Horizontal Metal Cutting
Band Saw; S/N 4338120
8” X 10” Ramco Model RS-90 Horizontal Metal Cutting Band
Saw; S/N 11935
1 HP Bridgeport 8-Speed Vertical Milling Machine; S/N J-94184, PTF,
9” X 42” Power Feed Table
6’ Arm X 15” Column Carlton Radial Arm Drill; 22-1200 RPM, 22” X
72” Base, 20” X 24” Drill Table
36” DoAll Model V-36 Vertical Metal Cutting Band Saw, 30” X 76”
Table
HAMILTON KETTLES, INC.
(2) 5 Ton X 36’ Span X 200’ Long Free-Standing Two Bridge Overhead Crane Systems – To Be Sold Separately
(3) Remmington Flex Shaft Grinders
20” Central Machinery Single Spindle Floor Drill
17” Walker Turner Single Spindle Floor Drill
3 HP Standard Electric Double End Pedestal Grinder
14” Kalamazoo Abrasive Chop Saw
Ridgid Model 300 Power Pipe & Bolt Threader
No. 5 Warner & Swasey M1740 Turret Lathe
4” Hammond Long Arm Double End Pedestal Type Buffer
No. 7 Greenerd Arbor Press
Shop Built Hydraulic H-Frame Press, 72” Between Uprights, 36” Ram
Stroke, 5 HP Hydraulic Unit
AIR COMPRESSOR & RELATED
50 HP Gardner Denver Model EDE99K04 Rotary Screw Air
Compressor; S/N S065512, 125 PSI, 14,600 Hrs.
30 HP Kellog American Hydrovane Model 120CK Air Compressor;
S/N 20HV309917
15 HP Ingersoll Rand Model 15E Horizontal Tank 2-Stage Air
Compressor; S/N 30T-465273
Air Tak Model SD-200-A Refrigerated Air Dryer; S/N 01G139
250 Gallon Vertical Air Receiver Tank
LIFT TRUCK & TRACTOR
4,000 LB Caterpillar LP Gas Solid Tire Fork Truck; S/N N/A, 2-Stage
Mast., Side Shift
2004 John Deere Model 455 Riding Lawn Mower; 60” Mower Deck,
3-CIL. Water Cooled Deisel Engine, Hydrostatic Drive, John Deere Model 40
Hydraulic Front End Loader Attachment, 882 Hrs. (New 2004)
OVERHEAD CRANES
(2) 5 Ton X 36’ Span Chicago Tramrail Double Girder Top
Running Overhead Bridge Cranes; Top Running Yale 5 Ton Cable
Hoists, Pendant Controls
200’ Freestanding I-Beam Crane Rail System; Uprights 24’ on
Centers, 120” Uprights w/ 16” I-Beam Rail
(2) 5 Ton X 36’ Span Euclid Double Girder Top Running
Overhead Bridge Cranes; Top Running Euclid 5 Ton Cable Hoists, 10’
Under Hook, 4’ Clearance Height, Pendant Controls
200’ Freestanding I-Beam Crane Rail System; Uprights 24’ on Center,
120” Uprights w/ 16” I-Beam Rail
**Cranes & Crane Rails will be Sold Separately & Overall, Highest
Individual or Overall Bids to Prevail**
SHOP EQUIPMENT
Large Quantity of Shop Equipment Including: Milwaukee Mag. Base
Drill, (5) Self Dumping Hoppers, Steel Welding Tables, Welding Clamps,
Craftsman Portable Tool Boxes, (6) 2,000 LB CM Electric Chain Hoists, Shop
Fans, Portable Shop Ladders, 10,000 LB Crane Scale, Simplex Hydraulic
Products, Electric & Pneumatic Hand Tools by Dewalt, Milwaukee, Skil, CP
Pneumatic & Others, 4,000 LB Shop Crane, Chain Falls, Safety Cabinets, Step
Ladders, Locker Units & Many Other Related Items
OFFICE FURNITURE
Office Furniture Including: 3-4-5 Drawer Lateral Files, Letter Files, D.P.
Desks, Office Chairs, Credenzas, Steel & Wood Bookcases, 2-Door Storage
Cabinets, Drafting Table, Steel Shelving & Many Other Related Items
IMPORTANT REMOVAL NOTICE
Time is of the essence with regards to the removal of the equipment from the premises.
All items must be removed by Friday, August 18 at Noon. Any items remaining after this
time will be considered abandoned and will be scrapped.
(2) 5 Ton X 36’ Span X 200’ Long Free-Standing
Two Bridge Overhead Crane Systems – To Be Sold
Separately
NEW
1990’s
(4) 250 Amp Lincoln Invertec V350 Pro Mig
Welding Systems
NEW
1990’s
Partial View Late Model Welding Equipment
NEW
1990’s
Partial View Late Model Power Tools
24” X 84” Leblond Regal Geared Head Engine
Lathe

STAINLESS STEEL KETTLE MANUFACTURER
SURPLUS TO THE NEEDS OF
HAMILTON
KETTLES, INC.
2898 Birch Drive – Weirton, WV 26062
SALE DATE:
Thursday, August 3rd
STARTING: 9:00AM
INSPECTION:
Wednesday, August 2nd
10:00 AM to 4:00 PM
Cincinnati Industrial
Auctioneers Inc.
2020 DUNLAP ST., CINCINNATI, OHIO 45214
PHONE (513) 241-9701 / FAX (513) 241-6760
INTERNET: cia-auction.com
STAINLESS STEEL KETTLE MANUFACTURER
HAMILTON
HAMILTON
KETTLES, KETTLES, INC. INC.
2898 Birch Drive – Weirton, WV 26062
IMPORTANT NOTICE:
Although information has been obtained from
sources deemed reliable, the auctioneer makes no
warranty or guarantee, expressed or implied, as to
the accuracy of the information herein contained. It
is for this reason that buyers should avail themselves
of the opportunity to make inspection prior
to the sale. This brochure is intended to provide general
information of the equipment being offered and is
subject to errors, omissions, additions or deletions.
Please check with the Auctioneer’s Office for a final
listing. Items offered may or may not necessarily be
sold as described and/or photographed in this
brochure.
MAIL BIDS ACCEPTED WITH A 25% DEPOSIT
FIRST CLASS MAIL!
☞
DIRECTIONS
3/4” X 12’ Pacific Model 750 HD12
Hydraulic Power Squaring Shear
From Rt. 22 Just East of Veterans Memorial
Bridge, Exit at Rt. 2 North, Exit No. 2, At Bottom
of Ramp Go Left onto Freedom Way / Half Moon
Dr. Rt. 507 West, Proceed Approx. 1/2 Mile and
Bear Right onto Birch Dr. (Half Moon Industrial
Park), Proceed to Sale Site (2nd Building on
Right). Watch for Auction Parking Sale Entrance
Signs & Arrows.
AUCTIONEERS
Jeffrey L. Luggen
West Virginia Auctioneers License No. 563
Important Mail
TO BE DIRECTED TO THE ATTENTION
OF EXECUTIVE PERSONNEL
THURSDAY, AUGUST 3RD
SALE UNDER THE MANAGEMENT OF
Cincinnati Industrial Auctioneers Inc.
Thomas Machine No. 2 C-Frame
Mechanical Power Tank Head
Dishing Press
TERMS OF SALE
All equipment described herein will be sold
“as is”, “where is” to the highest bidder or
bidders for cash in accordance with our regular
terms and conditions of sale. Unless other
satisfactory arrangements are made, a 25%
deposit in cash, certified or cashier’s check
payable to Cincinnati Industrial Auctioneers,
Inc., is required on all purchases. Firm and
personal checks accepted only if accompanied
by a letter from your bank guaranteeing your
funds. All sales are subject to state and/or
local taxes unless a signed exemption form is
presented at the time of purchase. All balances
are due at the conclusion of the sale.
No merchandise may be removed while the
sale is in progress. All bidders must comply
with our Standard Terms of Sale, copies of
which will be available at the sale site or can
be obtained from our website.
A 10% BUYER’S PREMIUM
IN EFFECT FOR THIS SALE.
2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760
INTERNET: cia-auction.com for printable brochures, catalog, terms and pre-bidding
PRE-SORT
FIRST CLASS
U.S. POSTAGE
PAID
CINCINNATI, OHIO
PERMIT NO. 3593
SALE DATE
Thursday,
August 3rd
9:00 AM