south bend lathe memorabilia and
south bend lathe memorabilia and
south bend lathe memorabilia and
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SOUTH BEND LATHE MEMORABILIA AND HISTORY<br />
1000’s of Original SOUTH BEND Product Brochures, Flyers, Sales Pieces, Photographs, etc. to be auctioned. Items dating back to the<br />
1920’s, never distributed to the public, most in Like New Condition. Many unique, one of a kind items. Great Buying Opportunity for<br />
Historians, EBay Sellers, South Bend Lathe owners, South Bend <strong>and</strong> Northern Indiana residents, etc. Don’t miss this opportunity!<br />
1000’s of Original<br />
SOUTH BEND Product<br />
Brochures, Flyers &<br />
More!<br />
One-Of-A-Kind<br />
Items Dating Back<br />
To The 1920s!<br />
TERMS OF AUCTION:<br />
• Everything is being sold on an “As is, where is, in place basis, with no warranties or guarantees of any kind.” It is the buyer’s responsibility to inspect<br />
before bidding. Everything must be paid for in full on day of auction with cash, check with proper ID, visa, MasterCard or Discover. A 10% buyer’s<br />
premium is in effect for this auction. Removal is the buyer’s responsibility, expense & risk. Any merch<strong>and</strong>ise not paid for within the specified time will<br />
be resold <strong>and</strong> any loss incurred in the resale of the merch<strong>and</strong>ise will be charged to the original buyer.<br />
ADDITIONAL TERMS:<br />
• If you are bidding on the internet thru www.bidspotter.com, terms are as follows: A 15% buyer’s premium is in effect.<br />
Internet bidders must register with a credit card. If you are the successful bidder, your credit card will be charged with<br />
a 25% deposit on the day of the auction with the balance due within 48 hours either by Cash, Check, Visa, MasterCard or Discover or Wire Transfer.<br />
Thinking of an Auction? Need an Appraisal? Know of a Plant Closure?<br />
Call Steve Thompson or Bryan Harvey • 937-426-8446 • www.thompsonauctioneers.com<br />
PUBLIC AUCTION<br />
New South Bend 1440 Geared Head Toolroom Lathe<br />
FACILITY CLOSING • COMPLETE LIQUIDATION!<br />
PUBLIC AUCTION<br />
WEDNESDAY, MAY 16, 2007 • 10:00 A.M.<br />
Inspection: Tuesday, May 15, 10:00 a.m. - 4:00 p.m.<br />
FEATURING:<br />
New South Bend 17” X 40” CNC Toolroom Lathe<br />
(2) New South Bend 14” X 40” Geared Head Lathes<br />
New South Bend 14” X 40” Elec. Vari-Speed Lathe<br />
Thompson 16” X 144” Way/Bed Grinder<br />
Gray 44” X 432” Double Housing Planer • Devlieg Jig Mill<br />
Lapointe 10 Ton X 36” Broach • G & L Gr<strong>and</strong> Rapids 14” X 60” 3-Axis Surface Grinder<br />
South Bend Turnado 17” X 56” Lathe • (6) South Bend Toolroom Lathes<br />
Edwards 10’ X 1/4” Hyd. Shear • DeLaurice 75 Ton Hyd. Brake • Toolroom • Ironworker<br />
Welders • Saws • Drills • 20,000 Lb. Caterpillar Forklift • Clark & Yale Forklifts<br />
Genie Aerial Boomlift • Large Qty. Tooling & Machine Access., Spare Parts, Maint. Items, etc.<br />
South Bend Lathe Product Brochures, “How To” Manuals<br />
Sales Literature, dating back to 1920’s • Great Opportunity, Most of Items in Like New!<br />
Steve Thompson, Auctioneer • 937-426-8446<br />
www.thompsonauctioneers.com • IN License #AU10200002<br />
FACILITY CLOSING • COMPLETE LIQUIDATION!!!<br />
Historic American Machine Tool Builder • Ceasing Manufacturing & Rebuilding Operations<br />
SOUTH BEND LATHE CO.<br />
1735 N. Bendix Drive • South Bend, Indiana<br />
WEDNESDAY, MAY 16, 2007 • 10:00 A.M.<br />
1 of 2<br />
SOUTH BEND LATHE CO.<br />
1735 N. Bendix Drive • South Bend, Indiana<br />
870 Routzong Rd.<br />
Xenia, OH 45385<br />
New South Bend 17” X 40”<br />
Electronic CNC Toolroom<br />
Lathe<br />
South Bend Turnado 17” X 56” Engine Lathe<br />
Pre-Sort First Class<br />
U.S. POSTAGE<br />
P A I D<br />
Dayton, Ohio<br />
Permit No. 375<br />
Bid On-Site or<br />
Bid Online At:<br />
www.bidspotter.com<br />
FACILITY CLOSING - COMPLETE LIQUIDATION!!!<br />
PUBLIC AUCTION<br />
HISTORIC AMERICAN MACHINE TOOL BUILDER • CEASING MANUFACTURING & REBUILDING OPERATIONS<br />
SOUTH BEND LATHE CO.<br />
1735 N. Bendix Drive • South Bend, Indiana<br />
WEDNESDAY, MAY 16, 2007<br />
Inspection: Tues., May 15 • 10:00 a.m. - 4:00 p.m.<br />
• FEATURING •<br />
New South Bend 17” X 40” CNC Toolroom Lathe • (2) New South Bend 14” X 40” Geared Head Lathes<br />
New South Bend 14” X 40” Elec. Vari-Speed Lathe • Thompson 16” X 144” Way/Bed Grinder<br />
Gray 44” X 432” Double Housing Planer • Devlieg Jig Mill • Lapointe 10 Ton X 36” Broach<br />
G & L Gr<strong>and</strong> Rapids 14” X 60” 3-Axis Surface Grinder • South Bend Turnado 17” X 56” Lathe<br />
(6) South Bend Toolroom Lathes • Edwards 10’ X 1/4” Hyd. Shear • DeLaurice 75 Ton Hyd. Brake • Toolroom • Ironworker<br />
Welders • Saws • Drills • 20,000 Lb. Caterpillar Forklift • Clark & Yale Forklifts • Genie Aerial Boomlift<br />
Large Quantity Tooling <strong>and</strong> Machine Accessories, Spare Parts, Maintenance Items, etc.<br />
South Bend Lathe Product Brochures, “How To” Manuals • Sales Literature, dating back to 1920’s.<br />
Great Opportunity, Most of Items in Like New!<br />
Edwards 10’ X 1/4” Hydraulic Squaring Shear New South Bend 1440 Geared Head Toolroom<br />
Lathe<br />
Devlieg 3H-48 Jig Mill<br />
Directions: From Indiana Turnpike/I-80, take Exit 72, U.S. Route 31 Bypass, South Towards Niles/South Bend/South Bend Airport. Merge onto U.S. 31 South<br />
Bypass off exit ramp, go 1 3/10 Miles on U.S. 31 South Bypass to the South Bend/Airport Exit. Take Exit, Route 20 Business Route, Airport will be on your left.<br />
Go East 1 3/10 Miles to Traffi c Circle, Intersection with Lincoln Way West. Go East on Lincoln Way West, 1 4/10 Miles to N. Bendix Drive. Turn Left (North) onto<br />
N. Bendix Drive, Auction Site 4/10 Mile on Left H<strong>and</strong> Side, 1735 N. Bendix Drive. Watch for Signs!<br />
BidSpotter.com offers an entertaining, stable <strong>and</strong> effective way to join the auction crowd from your home or offi ce. To bring the on<br />
screen bidding activity <strong>and</strong> audio to your location requires use of Internet connection. To register, go to www.bidspotter.com.<br />
Steve Thompson, Auctioneer • 937-426-8446<br />
www.thompsonauctioneers.com • Indiana License #AU10200002<br />
COMPLETE LIQUIDATION<br />
Historic American<br />
Machine Tool Builder<br />
FACILITY CLOSING
SOUTH BEND LATHE CO.<br />
NEW SOUTH BEND CNC TOOLROOM LATHE<br />
• SOUTH BEND Model 1740 MCNC Toolroom Lathe, New 2006,<br />
17” X 40” Cap., Anilam 4200T CNC Control, Machine can be run CNC<br />
or Manually through Electronic H<strong>and</strong>wheels, 7.5 HP, Constant Surface<br />
Speed, 2,800 RPM Max.<br />
NEW SOUTH BEND TOOLROOM LATHES<br />
• (2) SOUTH BEND Model 1440 GH Geared Head Lathes, New 2006,<br />
14”X40” Cap., Gap Bed, 5 HP, Inch/Metric Threading, Flood Coolant,<br />
U.S. Elec.<br />
• SOUTH BEND Model EVS1440 Electronic Variable Speed Lathe, New<br />
2006, 14.75 X 40” Cap., 5 HP, 2,500 RPM Max., Inch/Metric Threading,<br />
Coolant, U.S. Electrics<br />
NEW SOUTH BEND MINI MAGNATURN CNC LATHE<br />
• SOUTH BEND Magna Turn 612 CNC Lathe, s/n 00032LP, MDSI Touch<br />
Screen CNC Control with “OpenCNC” software, Windows Based,<br />
6” X 10” Capacity, 3/4” Hole, 3” 3-Jaw Chuck, 4 Position Tool Turret,<br />
Tail Stock<br />
SOUTH BEND MAGNA TURN CNC LATHES<br />
• (2) SOUTH BEND Magna Turn 1218 CNC Lathes, 12” X 18” Capacity,<br />
South Bend PC/CNC Controls, 8” Chuck, 15 HP, 8 Tool Positions,<br />
Tail Stocks<br />
PUBLIC AUCTION<br />
South Bend Magna Turn 612 CNC Lathe New South Bend Turnado 1440 EVS Variable Speed Lathe<br />
Chicago Dries & Krump 8’ Leaf Brake<br />
COMPLETE LIQUIDATION<br />
Historic American<br />
Machine Tool Builder<br />
FACILITY CLOSING<br />
NEW CNC BAR FEED<br />
• LEXAIR MINI RHINOBAR CNC Bar Feed, Model MRB6-1.62, s/n<br />
5128, New 1999, Never Installed, 6’ Tube, 1/8” - 1 5/8” Cap. Range,<br />
2 Pushers<br />
HORIZONTAL JIG MILL<br />
• DEVLIEG Model 3H-48 Jig Mill, s/n 8269, 3” Spindle, 40 Taper,<br />
Power Drawer Bar, 36” Vertical Travel, 48” Table Travel,<br />
16” Platen Travel, 35” X 48” Table, 1,200 RPM Max, Newall DRO,<br />
Steel Way Covers<br />
3-AXIS SURFACE GRINDER<br />
• GALLMEYER AND LIVINGSTON GRAND RAPIDS Model A,<br />
14” X 60” 3-Axis Hyd. Surface Grinder, s/n A-2011448, New 1967,<br />
14” X 48” Elec. Chuck with Controls, Filtration Coolant, Dresser<br />
WAY/BED GRINDER<br />
• THOMPSON 16” X 144” Way Grinder, Model C, s/n 12C503663,<br />
New 1965, 20 HP, 20” X 4” X 8” Grinding Wheel, Way Grinding<br />
Attachment, Contour Dressing Attachment, Filtration Coolant<br />
DOUBLE HOUSING PLANER<br />
• GRAY Double Housing Planer, 44” X 476” Table, 50” Between<br />
Columns, Approx. 50” Max. Under Rail, (2) Vert. Heads,<br />
(2) Side Heads, 100 HP DC Drive, Remote Operator Control Pendant<br />
HYDRAULIC POWER SQUARING SHEAR<br />
• EDWARDS Model 6-5/3000 Hydraulic Power Squaring Shear,<br />
s/n 77C/47421, 10’ X 1/4” Capacity, Front Operated Power Back<br />
Gauge, 40” Squaring Arm, (2) Sheet Supports<br />
HYDRAULIC PRESS BRAKE<br />
• DELAURICE 75 Ton X 8’ Hydraulic Press Brake, 8’ Overall,<br />
6’6” Between Housings, Estimate 75 Ton Capacity, Ram Adjust,<br />
Foot Pedal<br />
MANUAL LEAF BRAKE<br />
• CHICAGO/DRIES & KRUMP Model 814 Leaf Brake, s/n 83624,<br />
8’ X 14 Gauge<br />
WEDNESDAY, MAY 16 • 10:00 A.M.<br />
Towmotor 20,000 Lb. Capacity Fork Lift Yale 5,000 Lb. Fork Lift Genie Z-30/30 HD Aerial Boomlift<br />
Gallmeyer & Livingston Gr<strong>and</strong> Rapids 14” X 60”<br />
Surface Grinder<br />
Gray Double Housing Planer<br />
Thompson 16” X 144” Way Grinder<br />
HYDRAULIC IRONWORKER<br />
DRILL PRESSES<br />
• DVORAK/LITTLE SCOTCHMAN Model 1895 Hyd. Ironworker, • BUFFALO 15” Single Spindle Drill Press<br />
s/n 5573, Estimated 33 Ton Capacity, Misc. Puches <strong>and</strong> Dies<br />
• (2) SOUTH BEND 15” Single Spindle Drill Presses<br />
HORIZONTAL TOOLROOM BROACH<br />
• LAPOINTE Horizontal Broach, Est. 10 Ton X 36” Stroke, Broach Carrier<br />
VERTICAL MILL<br />
• SOUTH BEND Model 3H Vertical Mill, 3 HP Variable Speed, 10” X 50”<br />
Table, Accurite DRO, Servo Power Feeds on X <strong>and</strong> Y Axis, R8 Spindle<br />
CYLINDRICAL GRINDER<br />
• CINCINNATI 10” X 36” Plain Cylindrical Grinder, s/n 3P2D5F-3,<br />
Spark Out, Pick Feed, Plunge, Course/Fine Feeds<br />
• (2) SOUTH BEND 15” Twin Spindle Drill Presses<br />
• LELAND GIFFORD 24” Single Spindle Geared Head Drill Press,<br />
22” X 34” Table<br />
• LELAND GIFFORD 24” Single Spindle Geared Head Drill Press,<br />
25” X 48” Table<br />
WELDERS<br />
• MILLER Model Dialarc HF Tig Welder, s/n JF861068, 250 Amp,<br />
Miller Chiller<br />
• MILLER CP-250TS Mig Welder, s/n HG061175, Miller Wire Feeder<br />
SOUTH BEND LATHES<br />
• MILLER Millermatic 35S Mig Welder, Wire Feeder<br />
• SOUTH BEND Turnado 17” X 56” Lathe, s/n 77GJ2333, New 1977,<br />
Taper Attach., Coolant, 12” 3-Jaw <strong>and</strong> 12” 4-Jaw Chucks<br />
• SOUTH BEND 17” X 36” Toolroom Lathe, s/n 6581HKR10, Taper Attach.<br />
• SOUTH BEND 17” X 36” Toolroom Lathe, s/n 99580<br />
• SOUTH BEND 17” Lathe with 6-Position Bed Turret, 6” 3-Jaw Chuck<br />
• SOUTH BEND 13” X 24” Toolroom Lathe, s/n 8266TXX, 5C Collet Nose,<br />
• LINCOLN Idealarc R3S Mig Welder, s/n 7AC446147, 600 Amp,<br />
Lincoln Wire Feed with Bernard Telescopic Arm<br />
• LINCOLN Idealarc R3S Mig Welder, s/n AC462699, 400 Amp,<br />
Lincoln Wire Feed with Bernard Telescopic Arm<br />
• LINCOLN Idealarc R3S Mig Welder, Lincoln Wire Feed<br />
• LINCOLN Model TM-400/400 AC/DC Arc Welder<br />
Set up as Second Operation Lathe, no Lead Screw<br />
HEAVY DUTY WELDING TABLES<br />
LATHE BEDS<br />
• 120” X 72” X 2.5” Thick Heavy Duty Welding Table<br />
• Approx. (12) SOUTH BEND Lathe Beds <strong>and</strong> Roll Grinder Beds, • 120” X 60” X 2” Thick Heavy Duty Welding Table<br />
Various Sizes up to 20’ Between Centers Capacity<br />
T-SLOTTED LAYOUT TABLE/SET UP TABLE<br />
SAWS<br />
• 44” X 288” X 5.5” Thick Heavy Duty T-Slotted Set Up/Assembly Table<br />
• WELLS Model 8M Horiz. B<strong>and</strong> Saw, s/n 8533, 10” X 16” Capacity,<br />
MISCELLANEOUS MACHINERY<br />
In Feed Conveyor<br />
• WELLS Model 8M Horizontal B<strong>and</strong> Saw, 10” X 16” Capacity<br />
• SPEEDER Model KV50 Vertical B<strong>and</strong> Saw, s/n V50-1045, New 2003,<br />
20” Cap., Blade Welder<br />
• DEVLIEG 30” X 30” Air Lift Rotary Table<br />
• PEXTO Manual Initial Pinch Roll, Model 416E, 36” X 16 Gauge<br />
• GISHOLT Masterline Balancing Machine, Type S, Size 3, s/n 4065 X 17,<br />
with Controls<br />
• FAMCO #31R Ratchet Type Arbor Press<br />
Miller Tig Welder Speeder 20” Vertical B<strong>and</strong> Saw, New 2003 Delaurice 75 Ton Hyd. Press Brake<br />
MISCELLANEOUS MACHINERY - continued<br />
• GREENERD #4 Ratchet Type Arbor Press<br />
• GREENERD #3 1/2 Ratchet Type Arbor Press<br />
• GREENERD #3 Arbor Press<br />
• Several Small Miscellaneous Arbor Presses<br />
• (2) NICHOLS Horizontal H<strong>and</strong> Millers, Coolant<br />
• ANDERSON Straightening Press, Misc. Tooling, 4.5” X 33” Bed<br />
• (2) DELTA Double End Carbide Tool Grinders<br />
• BUILD ALL Parts Washer, Model 10-36, 24” X 36” Tank, Power Lift,<br />
Agitator, Timer<br />
• Hyd. H-Frame Shop Press, Est. 30 Ton Frame, 4 Ton Jack<br />
• HAMMOND Double End Heavy Duty Snag Grinder<br />
• CHAMPION 20 HP, 2-Stage Air Compressor<br />
• Air Holding Tank, 260 Gallon, Vertical<br />
FORK LIFTS<br />
• TOWMOTOR 20,000 Lb. Capacity Fork Lift Model 850SLP20024,<br />
s/n 850S650015, 2-Stage Mast, LP, Hard Tire<br />
• YALE 5,000 Lb. Capacity Fork Lift, Model GLC050RDNUAF072,<br />
s/n N463914, 2-Stage Mast, LP, Hard Tire, Cage, 42” Forks<br />
• CLARK 6,000 Lb. Capacity Fork Lift, Model CHY60-67-796-1266,<br />
Pneu. Tire, LP, Cage, 2-Stage Mast, 48” Forks<br />
MANLIFT AERIAL BOOMLIFT<br />
• GENIE Model Z-30/30 HD Aerial Boomlift, s/n 30Z30-3597,<br />
Electric, 2-Wheel Drive, 500 Lb. Capacity, 31’ Max. Reach<br />
OVERHEAD CRANES<br />
• SPANMASTER Manual Overhead Crane, 120’ Length, approx.<br />
25’ Span, with 1 Ton Chain Fall Hoist, Bolt Up Rails<br />
• SPANMASTER Manual Overhead Crane, 80’ Length, approx.<br />
25’ Span, with (2) 2 Ton Chain Fall Hoists, Bolt Up Rails<br />
• (4) SPANMASTER Manual Overhead Cranes, 100’ Length,<br />
approx. 20’ Span, ea. w/ (2) 2 Ton Chain Fall Hoists, Bolt Up Rails<br />
NOTE: Cranes <strong>and</strong> Crane Rails will not be available for removal until<br />
building emptied or nearly emptied of all items being auctioned.<br />
Approx. 1-2 weeks after auction date anticipated removal date for<br />
Cranes <strong>and</strong> Crane Rails.<br />
TOOLING AND MACHINE ACCESSORIES<br />
• Lathe Chucks, Face Plates, Collets, Vises, Welding Rod, Welding<br />
Supplies, Angle Blades, Saw Blades, Abrasives, Grinding Wheels,<br />
Surface Plates, Clamps, Hold Downs, Centers, Jacobs Chucks, 40<br />
Taper Holders, Boring Bars, CNC Collets, Mills, Drills, Inserts,<br />
Reamers, Taps, Dies, Tapping Heads, Boring Heads, Micrometers,<br />
Calipers, Height Gages, Indicators, Bushings, Dividing Heads, Spin<br />
Fixtures, Pin Gages, Jo Blocks, Clevel<strong>and</strong> Twist Drill Cabinet, Fly<br />
Cutters, Woodruff Cutters, New SMW AutoBlock Actuators, Many<br />
Other Items<br />
MISCELLANEOUS SHOP ITEMS<br />
• Shop <strong>and</strong> Office Furnishings, Nice Office Furniture (Desks, Chairs,<br />
Dividers, Conference Table <strong>and</strong> Chair, File Cabinets, Print Cabinets,<br />
Reception Area, etc.), B<strong>and</strong>ers, Shipping Items, Power Tools, Air<br />
Tools, H<strong>and</strong> Tools, Parts Bins, Huge Quantity Hardware <strong>and</strong> Fastening,<br />
Drill Cabinets, Fans, Ladders, Hose, Chain, H<strong>and</strong> Carts, (4) Fire<br />
Proof Cabinets, Paint Guns, Paint Pots, Straps, C-Clamps, Spare Parts,<br />
Parts Machines, Skids, Warehouse Steps, Drill Cabinets, Heavy Duty<br />
Tables, Monarch Shop Vises, (12) Electric Hoists, Self Dumping Hoppers,<br />
Horses, Wire Spools, Building <strong>and</strong> Machine Maintenance Items,<br />
Actylene Torches, Transformers, Bus Boxes, Disconnect Boxes, Scrap<br />
Steel (Sheet, Bar <strong>and</strong> Tube Stock), etc.<br />
SOUTH BEND LATHE PARTS<br />
• Miscellaneous SOUTH BEND parts, including Lathe <strong>and</strong> Roll Grinder<br />
Beds, Carriages, Compounds, Steady <strong>and</strong> Follow Rests, Lead Screws,<br />
Gears, Chucks, CNC Drives, CNC Boards, CNC Motors, CNC Control<br />
Components<br />
SOUTH BEND LATHE MEMORABILIA AND HISTORY<br />
• 1000’s of Original SOUTH BEND Product Brochures, Flyers, Sales<br />
Pieces, Photographs, etc. to be auctioned. Items dating back to the<br />
1920’s, never distributed to the public, most in Like New Condition.<br />
Many unique, one of a kind items. Great Buying Opportunity for<br />
Historians, E Bay Sellers, South Bend Lathe owners, South Bend <strong>and</strong><br />
Northern Indiana residents, etc. Don’t miss this opportunity!