TRADE OF PLASTERING - eCollege
TRADE OF PLASTERING - eCollege
TRADE OF PLASTERING - eCollege
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Module 1 – Unit 4 Rendering Walls<br />
Note: The fact that two diagonals of a rectangle or a square are equal in length<br />
can be used to good effect for testing for squareness a variety of building<br />
components, from the building lines of a new building to the door frames to be<br />
fitted in it (see Figure 9). If the two diagonals are of equal length then the<br />
corners of the building or door frame are at 90°.<br />
Figure 9<br />
5.0 Dispose of Waste in the Correct<br />
Manner<br />
Key Learning Point<br />
Importance of good housekeeping and segregation of waste<br />
5.1 Waste<br />
FÁS is committed to a Waste Recycling Policy<br />
Please adhere to the rules of this Policy<br />
Waste bins are located within the Training Centre and outside, for the recycling<br />
of waste materials. A sign on each bin will indicate the type of waste<br />
material, which should be placed into that particular bin.<br />
These bins are then emptied into the appropriate skip located at the rear of the<br />
building.<br />
Video titled: “Environmental Awareness Reducing Waste at Work”.<br />
Plastering Phase 2 19 Revision 1.0 July 2008