JBR MAZDA 3 Short Throw Shifter Plate Installation - James Barone ...

ePAPER READ

DOWNLOAD ePAPER

jamesbaroneracing.com

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

• Tug/Pull up on the bottom half of the air box shown<br />

below.<br />

• Using needle nose pliers remove the MAF wire from the<br />

back/bottom half of the air box shown below.

JBR MAZDASPEED 3 Oil Catch Can VTA Kit - James Barone Racing

JBR Adjustable Short Shift Plate Kit Pre-Installation Instructions ...

JBR MAZDASPEED 3 Adjustable Short Throw Shifter Plate

• Tug/Pull up on the bottom half of the air box shown below. • Using needle nose pliers remove the MAF wire from the back/bottom half of the air box shown below.

Battery and Battery Box Removal • Pull out on the two tabs holding the top of the battery cover and remove as shown below. • Using a 10mm socket and socket wrench remove the nuts holding the cross bar over the top of the battery and remove the cross bar.

Page 1: James Barone Racing Custom Fabricat
Page 5 and 6: • Using needle nose pliers remove
Page 7 and 8: Short Shift Plate Installation •
Page 9 and 10: • Install each of the 3 bolts wit
Page 11: • Reinstall the battery box, batt

JBR MAZDA 3 Short Throw Shifter Plate Installation - James Barone ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?