SS-16 Brass E10 Spec Sheet ecocirc® E10 - Xylem Applied Water ...

ecocirc ® E10 Circulators Centrifugal Pumps
Applications
•Specifically designed for Recirc Systems
Specifications
Pump:
•Maximum Working Pressure: 150 PSI
•Maximum Working Temperature: 203° F
•Minimum Working Temperature: 50° F
Motor:
•ECM/PM Spherical Motor
•115 Volts, 60 Hertz, 1 Phase
•10-60 Watts Power Consumption
•Automatic Overload Protection
•Low In-Rush Current
Piping Connection
•Flanged with 2- bolt holes
•Sweat
•Union
Features
Compact Design:
Close coupled, space saving design provides easy
installation.
Mounting:
Pump can be mounted horizontally or vertically with
motor end down.
* As defined, by CA AB1953. Less than 0.25% on wetted surface area.
NSF certified.
Construction:
ASTM lead-free* brass construction.
Laing Thermotech
Brass E10 Spec Sheet
Ceramic Bearing Ball and Carbon Bearing Cap:
High density ceramic bearing ball and graphite impeller
bearing cap designed for high efficiency and long life.
Impeller:
Highly efficient and dynamically balanced with carbon
bearing for smooth ultra quiet operation.
Casing:
Casing is lead-free* brass construction.
Mechanical Seal:
Unique patented design has no mechanical seal which is
a potential leak path.
Motor:
Patented spherical motor pump design is ultra quiet
and is designed for continuous operation. All ratings are
within working limits of the motor.
Part
Pump Housing
“O” Ring
Impeller
Bearing
Materials of Construction (Wetted Parts)
Materials
All Other Wetted Parts
Lead-Free* Brass
EPDM
Nylon/PPO
Carbon/Ceramic
Motor Highly Efficient ECM/PM
316 Stainless Steel
* Less than 0.25% Pb on wetted parts surface areas. NSF certified.

* As defined, by CA AB1953. Less than 0.25% on wetted surface area. NSF certified.
ITT
3878 S. Willow, Suite 104
Fresno, CA 93725
Tel: (559) 265-4730 (800) 554-6853
Fax: (559) 265-4740 (800) 453-7523
www.lainginc.itt.com
Copyright © 2011 ITT Corporation. Printed in the U.S.A. April 2011. SS-16
Laing Thermotech
Brass E10 Spec Sheet