PUNCHING DRILLING CUTTING DEBURRING - Alfra

Accessories – Adaptors
■ You use FEIN Magnet Drilling Machines?
■ You do not want to do without ALFRA Rotabest ® Cutters?
■ No Problem – we have the suitable adaptors
Prod.-No.
Adaptor with internal thread M18 x 6P 1.5 20201
Adaptor for the use of Rotabest ® HSS-Co-Eco and HSS-Co
RQX cutters from Ø 12 to 32.0 mm and Rotabest TCT cutters
from Ø 14.0 to 32.0 mm on: FEIN Core Drilling Machines
Type KBM 542
Adaptor with external thread (inc. ejector pin) 20202
Adaptor for use of Fein cutters with internal thread
M18 x 6P 1.5 on Metal Core Drilling Machines with Weldon shank.
Ejector pin to fit Prod.-No. 20202 – separate 20203
Adaptor 20204
Adaptor for the use of all cutters with Weldon shank on
Fein Quick IN quick change system.
This adaptor is unnecessary when using our HSS Eco cutters
in series Prod. No. 1909... and 2009...
Ejector pin for HSS cutter, Cutting depth 25 mm 1950500
Ejector pin for HSS cutter, Cutting depth 50 mm 1975500
Extension Adaptor 20206
with Weldon shank and ejector pin.
For the use of cutters 25 – 35 – 50 mm cutting depth in
cases when the surface of the material to be drilled is lower
than the support surface of the machine. The first ejector pin
releases the second ejector pin, the coolant flows through
the hole to the cutter.
Total length of Adaptor: 80 mm
Diameter: 30 mm
Ejector pin: 6.35 x 77 mm, Prod.-No. 1926500
Adaptor cpl. with ejector pin+ Allen key 20210
Adaptor for the use of cutters with FEIN Quick IN shank on
Metal Core Drilling Machines with Weldon tool holder.
Replacement ejector pin (for adaptor only) 6.35 x 125 mm 1936501
Adaptor for TCT Hole Saws, type MBS 060WD
on Metal Core Drilling Machines with Weldon tool holder
(incl. ejector pin Prod. No. 1950500
Prod.-No. 20201
Prod.-No. 20202
Prod.-No. 20204
Prod.-No. 20206
Prod.-No. 20210
Prod. No. 060WD
Weldon
FEIN/Hitachi
M18 x 6P 1.5
Internal Thread
B
FEIN/Hitachi
M18 x 6P 1.5
Internal Thread
Weldon FEIN-Quick IN
Weldon
Weldon
FEIN-Quick INNEW
NEW
B/33