FIM STANDARDS FOR TRACK RACING CIRCUITS (STRC ...
FIM STANDARDS FOR TRACK RACING CIRCUITS (STRC ...
FIM STANDARDS FOR TRACK RACING CIRCUITS (STRC ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10.1 Wooden Fence<br />
A fence constructed of wooden planks must:<br />
a) be at least 25mm in thickness,<br />
b) be adequately proofed against rotting and other deterioration,<br />
c) where of plank construction must be erected horizontally,<br />
<br />
<br />
the fence.<br />
e) have the inside surface of the entire fence painted to clearly contrast with the<br />
colour of the track surface.<br />
<br />
<br />
rounded cap. This cap must not overhang on the inside of the fence.<br />
10.2 Board Material<br />
A fence constructed of other approved board material must:<br />
a) be at least 19mm in thickness,<br />
b) be correctly proofed against rotting and other deterioration,<br />
<br />
<br />
into the ground. Stanchions must not protrude above the top of the fence.<br />
d) have the inside surface of the entire fence painted to clearly contrast with the<br />
colour of the track surface.<br />
<br />
<br />
rounded cap. This cap must not overhang on the inside of the fence.<br />
10.3 Kick Board<br />
The base of the safety fence, irrespective of the type of construction (other than<br />
concrete, timber, or rubber belting), must be equipped with a kick board on the<br />
track side of the fence, 300 mm in height and constructed of wood, or other<br />
approved material.<br />
<br />
<br />
fence.<br />
<br />
<br />
ground. These supports must be separated from the fence stanchions.<br />
c) sections of the kickboard must be painted to contrast with the colour of the<br />
track surface.<br />
30<br />
Normes / Standards