FIM STANDARDS FOR TRACK RACING CIRCUITS (STRC ...

APPENDIX 079
FIM STANDARDS FOR TRACK RACING CIRCUITS (STRC)
079.1 GENERAL
The “FIM Standards for Track Racing Circuits” (STRC) determine the necessary
standards for obtaining an FIM Track Racing licence.
The FIM Championships must be held on Track Racing circuits which are
homologated by the FIM, as stipulated in the FIM Sporting Code under Art. 10.8.
079.2 INSPECTION AND HOMOLOGATION PROCEDURE
079.2.1 Request for a track inspection
Each FMN can apply for a track inspection by the FIM Administration. Every
application for an FIM track inspection must be submitted together with an
accurate plan-drawing of the track to the scale 1:500. This plan-drawing
must also indicate the pits area, the changing room, the amenities and
accommodation for the public, as well as all relevant dimensions and necessary
information.
An accurate construction-drawing of the safety barrier to the scale 1:10 must
also be submitted.
ONE EVENT TRACK
Inspection:
STRC shall be used as guideline for the inspection, however at all times safety
for the competitor (and spectators) must be the priority consideration.
A pre-inspection of the venue must be held during the season preceding the that
in which it is intended to stage the meeting (an absolute minimum of two months
before the proposed event). Only in exceptional circumstances as agreed in
advance, and in writing by the CCP will this stipulation be varied.
A complete track inspection MUST also be completed a minimum of two days
before the proposed event. The persons present at the inspection MUST
include the appointed CCP inspector, an FMN delegate, the track Owner and/or
organiser. It is also recommended that one rider shall be present.
3
Normes / Standards