ball and roller bearings - NTN Bearing Corporation of

122
SERIES
H 23
HE23
HS23
HA23
Adapter No. d 1 B 1 d 2 B 2 B 3* Weight
H HE HS HA
H
mm
HE
in.
HS
in.
HA
in.
mm in. mm mm mm kg lbs.
H2304 — — — 17 — — — 31 1.102 32 7 — 0.049 0.108
H2305X HE2305 — — 20 3 ⁄4 — — 35 1.142 38 8 — 0.087 0.192
H2306X HE2306X HS2306 — 25 1 7 ⁄8 — 38 1.220 45 8 — 0.126 0.278
H2307X — HS2307 — 30 — 1 1 ⁄8 — 43 1.378 52 9 — 0.165 0.364
H2308X HE2308X HS2308X — 35 1 1 ⁄4 1 3 ⁄8 — 46 1.417 58 10 — 0.224 0.494
H2309X HE2309X HS2309X HA2309 40 1 1 ⁄2 1 5 ⁄8 1 7 ⁄16 50 1.535 65 11 — 0.280 0.617
H2310X HE2310X HS2310 HA2310 45 1 3 ⁄4 1 5 ⁄8 1 11 ⁄16 55 1.654 70 12 — 0.362 0.798
H2311X HE2311XY HS2311 HA2311 50 2 1 7 ⁄8 1 15 ⁄16 59 1.772 75 12 — 0.420 0.926
H2312X — HS2312 — 55 — 2 1 ⁄8 — 62 1.850 80 13 — 0.481 1.06
H2313X HE2313X HS2313X HA2313 60 2 1 ⁄4 2 3 ⁄8 2 3 ⁄16 65 1.969 85 14 — 0.557 1.23
H2315X HE2315X — HA2315 65 2 1 ⁄2 — 2 7 ⁄16 73 2.165 98 15 — 1.050 2.31
H2316X HE2316X — HA2316 70 2 3 ⁄4 — 2 11 ⁄16 78 2.323 105 17 — 1.280 2.82
H2317X HE2317X — HA2317X 75 3 — 2 15 ⁄16 82 2.480 110 18 — 1.450 3.20
H2318X — — HA2318 80 — — 3 3 ⁄16 86 2.559 120 18 — 1.690 3.73
H2319X HE2319X — — 85 3 1 ⁄4 — — 90 2.677 125 19 — 1.920 4.23
H2320X HE2320X — HA2320 90 3 1 ⁄2 — 3 7 ⁄16 97 2.795 130 20 — 2.150 4.74
H2322X HE2322X — HA2322X 100 4 — 3 15 ⁄16 105 3.031 145 21 — 2.740 6.04
H2324X HE2324 — HA2324 110 4 1 ⁄4 4 3 ⁄16 112 4.409 155 22 — 3.190 7.03
H2326 HE2326 — HA2326 115 4 1 ⁄2 4 7 ⁄16 121 4.764 165 23 — 4.600 10.1
H2328 HE2328 — HA2328 125 5 4 15 ⁄16 131 5.157 180 24 — 5.550 12.2
H2330 HE2330 — HA2330 135 5 1 ⁄4 5 3 ⁄16 139 5.472 195 26 — 6.630 14.6
H2332 HE2332 — HA2332 140 5 1 ⁄2 5 7 ⁄16 147 5.787 210 28 — 9.140 20.2
H2334 HE2334 — HA2334 150 6 5 15 ⁄16 154 6.063 220 29 — 10.200 22.5
H2336 HE2336 — HA2336 160 6 1 ⁄4 6 7 ⁄16 161 6.339 230 30 — 11.300 24.9
H2338 HE2338 — HA2338 170 6 1 ⁄2 6 15 ⁄16 169 6.654 240 31 — 12.600 27.8
H2340 HE2340 — HA2340 180 7 7 3 ⁄16 176 6.929 250 32 — 13.900 30.6
H2344 — — — 200 — — 183 7.205 280 32 44 16.700 36.8
H2348 — — — 220 — — 196 7.717 300 34 46 19.700 43.4
H2352 — — — 240 — — 208 8.189 330 36 49 24.200 53.4
H2356 — — — 260 — — 221 8.701 350 38 51 27.800 61.3
* Adapters with the dimension B 3 have a locking device as shown in the right illustration.
Notes: 1. The adapter no. denotes the complete assembly of adapter sleeve, locknut and lockwasher or lockplate.
2. Suffix X denotes the narrow slot type of adapter sleeve. The straight inner tab type of lockwasher (also denoted by suffix X) should be used with sleeve.
3. Suffix Y denotes a non-standard thread. This is necessary in certain cases because of the thin section of the sleeve.
4. The weights given in above table are for adapters of type H. There is little difference in the weights of other types of the same size.