14260_10 - abs Fire Fighting srl

Technical Bullettin
code
1370 14260_10
According directive 96/98/EC, EN 1866 and with CE-mark
The wheeled fire extinguisher is manufactured according to
Directive 96/98/EC (MED) with modules B and D. As with portable
extinguishers, wheeled units also have to comply with high
standards to ensure their extinguishing capability
(fire rating), quality and reliability.
We at a.b.s. know how important it is to make the right choice in
fire fighting.
Recently, a new European standard for wheeled extinguishers,
EN 1866, was introduced.
The a.b.s. wheeled extinguisher range is one of the first in Europe
to comply with this standard.
The wheeled units also carry the CE mark so the range can boast
three quality guarantees :a.b.s. (ISO 9001), compliance with
EN 1866 and the CE mark.
The standard EN1866 defines important minimum levels of
pressure retention, corrosion protection, operating temperatures
and fire rating.
a.b.s. S.r.l. (Milan) Italy
Lombardia Street 310, 20861 Brugherio
Tel. +39 039 839631 - Fax. +39 039 8396349
e-mail:info@absfire.it - www.absfire.it - Capital 2.000.000
14260_10 Foam Wheeled lt 50 Stainless steel
Approved EN 1866-1:2008, Marina MED, higest rate achieved - A IVB
Technical Characteristics
Wheeled extinguisher is designed for professional use under
severe circumstances, resulting in a high level of quality and ease
of use.
The cylinder, CE marked, it has the welded frame or detachable
frame.
Ease of mobility is achieved as a result of the large wheels with
solid rubber tyres and push bar also ensuring good stability during
operation.
Headcap 2" BSP
The headcap is made of brass and equipped with a spring loaded
safety valve to prevent an unsafe situation,as a result of overfilling
or during accidental unscrewing from the cylinder neck gear.
Discharge device
Equipped with a highly flexible hose made in EPDM rubber with
an excellent resistance manufactured from selected synthetic
materials complete with a pistol.
The specially designed ergonomic patented foam nozzle ensures a
steady flow of foam with a very low drop in pressure.
Propellant bottle
N2 nitrogen bottle, chromemolybdenum carbon steel, is made
according to directive EN 1964-1 ECC.
Before painting it is cleaned by sand blasting thus ensuring a raw
surface for a perfect and strong grasp of the epoxy polyester
powder coating.
This red RAL 3000 u.v. repellent is resistant to scratches and
knocks as well to corrosive weather conditions.
It is delivered complete with a brass handwheel valve and safety
valve.
Extinguishing agent
Organic solid materials,
wood rubber, textiles etc.
Sealfire ® Super concentrate is the most powerful product
registered by a.b.s. s.r.l. formulated for fire extinguisher.
It is an additive AFFF based, specially formulated for best sealing
effects.
Cartridge
operated
Stainless
Steel
Cylinder
Advantages
Technical data are subject to modification
for improvements without prior notice
Flammable liquids,
gasoline, oil etc.
WWW.absfire.it
• Very mobile and easy to operate
• Excellent quality, therefore a long operational lifetime
• Good ergonomy, easy to drive
• Extremely high ratings on A, B fires
(solid combustibles, liquid fuels)
• Can be used at low temperatures (+0°C)
On request -30°C or -20°C.
• Easy to service
• First in Europe in accordance with the new EN 1866 standards
• With CE approval
• Other Foam types available.
- Test method and result -
The 233B tray has been used and four 21B trays have been
installed alongside, as from the following design.
21 B
Ø 920 mm
21 B
Ø 920 mm
233 B
Ø 3 mt
CSI Certificate
MED/0497/140/09
Swivel coupling
It allows easy unroling
of the hose avoiding
twisting
ON REQUEST
N2 Pressure reducer
21 B
Ø 920 mm
21 B
Ø 920 mm
The propellant used has been heptane.
Two fire tests have been performed, with extincion time of
respectively 9 and 10 seconds; the test result was positive.
Classification obtained: - EN 1866 - 233 IV B - the highest.
Data Sheet Code Date Check Rev Pag.
Fire Extinguisher 14260_10 26/09/11 RB 1/AS 1/2

Technical Bullettin
code
1370 14260_10
Cylinder "Ø"........................................................................: 315 -0 +15 mm
Material..................................................................................................: AISI 304
Operating pressure.......................................................... : 13 bar a 20°C
Test pressure according 97/23/EC.........................................: 30 bar
Burst pressure....................................................................................: >55 bar
Temperature range...............................................................: +0°C +60°C
Extinguishing agent A.F.F.F............................................:2% Sealfire ®
Propellant cylinder.................................................................: (N2) 105 bar
Complete replacement spare parts
31303_9 Including:
Sealfire, 2 lt N2 cylinder, O-ring 2” and 4”, washer
rings,filter+coupling, safety seal.
15
11
Detachable frame
No welding on the
cylinder ensure better
and higher safety.
6 8
18
Welded frame.
The axe and carring
handle are welded on
the cylinder body.
14
5
13
3
4
10
1
9
16
a.b.s. S.r.l. (Milan) Italy
Lombardia Street 310, 20861 Brugherio
Tel. +39 039 839631 - Fax. +39 039 8396349
e-mail:info@absfire.it - www.absfire.it - Capital 2.000.000
7 12
OPTIONAL
Large cap 4” with
1/4” safety valve,
vent valve, gauge.
Technical specifications
17
2
STANDARD
2” cap with
1/4” safety valve.
Nominal charge......................................................................................... : 50 lt
Discharge time ~.................................................................................: 47 sec
Jet length ~.................................................................................................... : 8 m
Dimensions
Height ~................................................................................................: 1145 mm
Width ~.................................................................................................. : 455 mm
Depth ~.................................................................................................. : 550 mm
Weight ~....................................................................................................... : 85 kg
The SOLAS Convention Chapter II-2 part C lays the obligation
of the provision of replacement spare change for the 100%
for the first 10 extinguishers installed, while the remaining fire
extinguishers are needed the 50% of the replacement spare.
The maximum quantity of refills shown are 60.
Pos. Description Code Q.ty
1 Cylinder (lt 64) Stainless steel 27830 1
2 Valve G.2” with safety valve 21822 1
Technical data are subject to modification
for improvements without prior notice
Spare part list
WWW.absfire.it
3 3/4” Handwheel valve 21818 1
4 N2 nitrogen cylinder PED-CE (105bar) 20102 1
5 Adaptor for N2 cylinder 20008 1
6 Foam nozzle light alloy 21006 1
7 Trigger valve brass 3/4” 66030 1
8 Discharge hose L 5 mt 20649 1
On request hose L 10 mt 20649_1
9 Ø 300 mm wheels rubber and plastic 21931 2
10 Sealfire 1 lt 21093 1L
11 Washer ring teflon 3/4” - 13x24x2 20049 1
12 Manometer Ø 27 Brass 21522 1
13 Safety pin 21018 1
14 Washer ring 11x19x2 20021_1 1
15 Siphon tube 21706 1
16 3/4” Filter + coupling 83011 + 20024 1
17 Safety valve CE 1/4” 28024 1
18 Cap for protection foot cylinder 28072 2
3-4 Spare charged Cartridge 2 L-105 bar 41231
Available antifreeze -20°C or -30°C
The use of non original spare parts may cause malfunctions loss
Maintenance and Guarantee
The family 14260_10 include more than one type of version.
14260_11 - Cap 4” - Welded frame - Stainless steel cylinder.
14260_12 - Cap 4” - Detachable frame - Stainless steel cylinder.
14260_13 - 2” valve - Welded frame - Cylinder painted inside.
14260_14 - Cap 4” - Welded frame - Cylinder painted inside.
14260_15 - Cap 4” - Detachable frame - Cylinder painted inside.
14260_16 - 2” valve - Detachable frame - Cylinder painted inside.
14260_17 - 2” valve - Detachable frame - Stainless steel cylinder.
In accordance with the Directive 96/98/EC by the SOLAS 74
convention, resolutions and circulars of the IMO, EN 1866-1:2007
on the Annex A.1/3.52 Directive 2008/67/CE of the certificate and
Notified by CSI SpA - No 0497.
Maintenance must be made periodically by, trained and certified staff, according to the local regulations of the country where it is located.
The extinguisher is guaranteed for 12 months from the date of the supply. The guarantee includes, repairing or replacement, as manufacturer
option. Unit must be sent back to the factory free of charge, only when authorized written agreement with our sales office has been reached.
The guarantee expires in case of tampering and bad maintenance made by not-authorized staff, or transport damages.
It must be recharged only by staff authorized and certified by a.b.s. S.r.l., use only genuine original spare parts.
Data Sheet Code Date Check Rev Pag.
Fire Extinguisher 14260_10 26/09/11 RB 1/AS 2/2

Technical Bullettin
code
1370 14289_10
According directive 96/98/EC, EN 1866 and with CE-mark
The wheeled fire extinguisher is manufactured according to
Directive 96/98/EC (MED) with modules B and D. As with portable
extinguishers, wheeled units also have to comply with high
standards to ensure their extinguishing capability
(fire rating), quality and reliability.
We at a.b.s. know how important it is to make the right choice in
fire fighting.
Recently, a new European standard for wheeled extinguishers,
EN 1866, was introduced.
The a.b.s. wheeled extinguisher range is one of the first in Europe
to comply with this standard.
The wheeled units also carry the CE mark so the range can boast
three quality guarantees :a.b.s. (ISO 9001), compliance with
EN 1866 and the CE mark.
The standard EN1866 defines important minimum levels of
pressure retention, corrosion protection, operating temperatures
and fire rating.
a.b.s. S.r.l. (Milan) Italy
Lombardia Street 310, 20861 Brugherio
Tel. +39 039 839631 - Fax. +39 039 8396349
e-mail:info@absfire.it - www.absfire.it - Capital 2.000.000
14289_10 Foam Wheeled lt 100 Stainless steel
Approved EN 1866-1:2008, Marina MED, higest rate achieved - A IVB
Technical Characteristics
Wheeled extinguisher is designed for professional use under
severe circumstances, resulting in a high level of quality and ease
of use.
The cylinder, CE marked, it has the welded frame or detachable
frame.
Ease of mobility is achieved as a result of the large wheels with
solid rubber tyres and push bar also ensuring good stability during
operation.
Headcap 2" BSP
The headcap is made of brass and equipped with a spring loaded
safety valve to prevent an unsafe situation,as a result of overfilling
or during accidental unscrewing from the cylinder neck gear.
Discharge device
Equipped with a highly flexible hose made in EPDM rubber with
an excellent resistance manufactured from selected synthetic
materials complete with a pistol.
The specially designed ergonomic patented foam nozzle ensures a
steady flow of foam with a very low drop in pressure.
Propellant bottle
N2 nitrogen bottle, chromemolybdenum carbon steel, is made
according to directive EN 1964-1 ECC.
Before painting it is cleaned by sand blasting thus ensuring a raw
surface for a perfect and strong grasp of the epoxy polyester
powder coating.
This red RAL 3000 u.v. repellent is resistant to scratches and
knocks as well to corrosive weather conditions. It is delivered
complete with a brass handwheel valve and safety valve.
Extinguishing agent
Organic solid materials,
wood rubber, textiles etc.
Sealfire ® Super concentrate is the most powerful product
registered by a.b.s. s.r.l. formulated for fire extinguisher.
It is an additive AFFF based, specially formulated for best sealing
effects.
Cartridge
operated
Stainless
Steel
Cylinder
Advantages
Technical data are subject to modification
for improvements without prior notice
Flammable liquids,
gasoline, oil etc.
WWW.absfire.it
• Very mobile and easy to operate
• Excellent quality, therefore a long operational lifetime
• Good ergonomy, easy to drive
• Extremely high ratings on A, B fires
(solid combustibles, liquid fuels)
• Can be used at low temperatures (+0°C)
On request -30°C or -20°C.
• Easy to service
• First in Europe in accordance with the new EN 1866 standards
• With CE approval
• Other Foam types available.
- Test method and result -
The 233B tray has been used and four 21B trays have been
installed alongside, as from the following design.
21 B
Ø 920 mm
21 B
Ø 920 mm
233 B
Ø 3 mt
CSI Certificate
MED/0497/143/09
Swivel coupling
It allows easy unroling
of the hose avoiding
twisting
ON REQUEST
N2 Pressure reducer
21 B
Ø 920 mm
21 B
Ø 920 mm
The propellant used has been heptane.
Two fire tests have been performed, with extincion time of
respectively 9 and 10 seconds; the test result was positive.
Classification obtained: - EN 1866 - 233 IV B - the highest.
Data Sheet Code Date Check Rev Pag.
Fire Extinguisher 14289_10 26/09/11 RB 1/AS 1/2

Technical Bullettin
code
1370 14289_10
Cylinder "Ø"........................................................................................ : 400 mm
Material............................................................................................... : AISI 304
Operating pressure.......................................................... : 13 bar a 20°C
Test pressure according 97/23/EC.........................................: 30 bar
Burst pressure....................................................................................: >55 bar
Temperature range...............................................................: +0°C +60°C
Extinguishing agent A.F.F.F...........................................:2% Sealfire ®
Propellant cylinder.................................................................: N2 (155 bar)
Complete replacement spare parts
31303_19 Including:
Sealfire, 3 lt N2 cylinder, O-ring 2” and 4”, washer
rings,filter+coupling, safety seal.
15
11
Detachable frame
No welding on the
cylinder ensure better
and higher safety.
6 8
18
Welded frame.
The axe and carring
handle are welded on
the cylinder body.
14
5
13
3
4
10
1
9
16
a.b.s. S.r.l. (Milan) Italy
Lombardia Street 310, 20861 Brugherio
Tel. +39 039 839631 - Fax. +39 039 8396349
e-mail:info@absfire.it - www.absfire.it - Capital 2.000.000
7 12
OPTIONAL
Large cap 4” with
1/4” safety valve,
vent valve, gauge.
Technical specifications
17
2
STANDARD
2” cap with
1/4” safety valve.
Nominal charge.......................................................................................: 100 lt
Discharge time ~.................................................................................: 99 sec
Jet length ~.................................................................................................... : 8 m
Dimensions
Height ~................................................................................................: 1335 mm
Width ~.................................................................................................. : 550 mm
Depth ~.................................................................................................. : 670 mm
Weight ~......................................................................................................: 160 kg
The SOLAS Convention Chapter II-2 part C lays the obligation
of the provision of replacement spare change for the 100%
for the first 10 extinguishers installed, while the remaining fire
extinguishers are needed the 50% of the replacement spare.
The maximum quantity of refills shown are 60.
Technical data are subject to modification
for improvements without prior notice
Spare part list
Pos. Description Code Q.ty
1 Cylinder (lt 130) Stainless steel 27033 1
2 Valve G.2” with safety valve 21822 1
WWW.absfire.it
3 3/4” Handwheel valve 21818_1 1
4 3 lt N2 cylinder PED-CE (155bar) 20108 1
5 Adaptor for N2 cylinder 20008 1
6 Foam nozzle light alloy 21006 1
7 Trigger valve brass 3/4” 66030 1
8 Discharge hose L 5 mt 20649 1
On request hose L 10 mt 20649_1
9 Ø 300 mm wheels rubber and plastic 21931 2
10 Sealfire2L 21171 2 lt
11 Washer ring teflon 3/4” - 13x24x2 20049 1
12 Manometer Ø 27 Brass 21534 1
13 Plastic seal 28004 1
14 Washer ring 11x19x2 20021_1 1
15 Siphon tube 21743 1
16 3/4” Filter + coupling 83011 + 20024 1
17 Safety valve 1/4” (22 bar) 28024 1
18 Cap for protection foot cylinder 28073 2
3+4 Spare charged cartridge 3 lt - 155 bar 41231
Available antifreeze -20°C or -30°C
The use of non original spare parts may cause malfunctions loss
Maintenance and Guarantee
The family 14289_10 include more than one type of version.
14289_11 - Cap 4” - Welded frame - Stainless steel cylinder.
14289_12 - Cap 4” - Detachable frame - Stainless steel cylinder.
14289_13 - 2” valve - Welded frame - Cylinder painted inside.
14289_14 - Cap 4” - Welded frame - Cylinder painted inside.
14289_15 - Cap 4” - Detachable frame - Cylinder painted inside.
14289_16 - 2” valve - Detachable frame - Cylinder painted inside.
14289_17 - 2” valve - Detachable frame - Stainless steel cylinder.
In accordance with the Directive 96/98/EC by the SOLAS 74
convention, resolutions and circulars of the IMO, EN 1866-1:2007
on the Annex A.1/3.52 Directive 2008/67/CE of the certificate and
Notified by CSI SpA - No 0497.
Maintenance must be made periodically by, trained and certified staff, according to the local regulations of the country where it is located.
The extinguisher is guaranteed for 12 months from the date of the supply. The guarantee includes, repairing or replacement, as manufacturer
option. Unit must be sent back to the factory free of charge, only when authorized written agreement with our sales office has been reached.
The guarantee expires in case of tampering and bad maintenance made by not-authorized staff, or transport damages.
It must be recharged only by staff authorized and certified by a.b.s. S.r.l., use only genuine original spare parts.
Data Sheet Code Date Check Rev Pag.
Fire Extinguisher 14289_10 26/09/11 RB 1/AS 2/2

Technical Bullettin
code
1370 14284_10
According directive 96/98/EC, EN 1866 and with CE-mark
The wheeled fire extinguisher is manufactured according to
Directive 96/98/EC (MED) with modules B and D.
As with portable extinguishers, wheeled units also have to comply
with high standards to ensure their extinguishing capability
(fire rating), quality and reliability.
We at a.b.s. know how important it is to make the right choice in
fire fighting.
Recently, a new European standard for wheeled extinguishers,
EN 1866, was introduced.
The a.b.s. wheeled extinguisher range is one of the first in Europe
to comply with this standard.
The wheeled units also carry the CE mark so the range can boast
three quality guarantees :a.b.s. (ISO 9001), compliance with
EN 1866 and the CE mark.
The standard EN1866 defines important minimum levels of
pressure retention, corrosion protection, operating temperatures
and fire rating.
a.b.s. S.r.l. (Milan) Italy
Lombardia Street 310, 20861 Brugherio
Tel. +39 039 839631 - Fax. +39 039 8396349
e-mail:info@absfire.it - www.absfire.it - Capital 2.000.000
14284_10 Foam Wheeled lt 150 Stainless steel
Approved EN 1866-1:2008, Marina MED, higest rate achieved - A IVB
Technical Characteristics
Wheeled extinguisher is designed for professional use under
severe circumstances, resulting in a high level of quality and ease
of use.
The cylinder, CE marked, it has the welded frame or detachable
frame.
Ease of mobility is achieved as a result of the large wheels with
solid rubber tyres and push bar also ensuring good stability during
operation.
Headcap 2" BSP
The headcap is made of brass and equipped with a spring loaded
safety valve to prevent an unsafe situation,as a result of overfilling
or during accidental unscrewing from the cylinder neck gear.
Discharge device
Equipped with a highly flexible hose made in EPDM rubber with
an excellent resistance manufactured from selected synthetic
materials complete with a pistol.
The specially designed ergonomic patented foam nozzle ensures a
steady flow of foam with a very low drop in pressure.
Propellant bottle
N2 nitrogen bottle, chromemolybdenum carbon steel, is made
according to directive EN 1964-1 ECC.
Before painting it is cleaned by sand blasting thus ensuring a raw
surface for a perfect and strong grasp of the epoxy polyester
powder coating.
This red RAL 3000 u.v. repellent is resistant to scratches and
knocks as well to corrosive weather conditions. It is delivered
complete with a brass handwheel valve and safety valve.
Extinguishing agent
Organic solid materials,
wood rubber, textiles etc.
Sealfire ® Super concentrate is the most powerful product registered
by a.b.s. s.r.l. formulated for fire extinguisher.
It is an additive AFFF based, specially formulated for best sealing
effects.
Cartridge
operated
Stainless
Steel
Cylinder
Advantages
Technical data are subject to modification
for improvements without prior notice
WWW.absfire.it
• Very mobile and easy to operate
• Excellent quality, therefore a long operational lifetime
• Good ergonomy, easy to drive
• Extremely high ratings on A, B fires
(solid combustibles, liquid fuels)
• Can be used at low temperatures (+0°C)
On request -30°C or -20°C.
• Easy to service
• First in Europe in accordance with the new EN 1866 standards
• With CE approval
• Other Foam types available.
- Test method and result -
The 233B tray has been used and four 21B trays have been
installed alongside, as from the following design.
21 B
Ø 920 mm
21 B
Ø 920 mm
Flammable liquids,
gasoline, oil etc.
233 B
Ø 3 mt
CSI Certificate
MED/0497/145/09
Swivel coupling
It allows easy unroling
of the hose avoiding
twisting
ON REQUEST
N2 Pressure reducer
21 B
Ø 920 mm
21 B
Ø 920 mm
The propellant used has been heptane.
Two fire tests have been performed, with extincion time of
respectively 9 and 10 seconds; the test result was positive.
Classification obtained: - EN 1866 - 233 IV B - the highest.
Data Sheet Code Date Check Rev Pag.
Fire Extinguisher 14284_10 26/09/11 RB 1/AS 1/2

Technical Bullettin
code
1370 14284_10
Cylinder "Ø"..........................................................................................: 450 mm
Material................................................................................................. : AISI 304
Operating pressure.......................................................... : 13 bar a 20°C
Test pressure according 97/23/EC.........................................: 30 bar
Burst pressure....................................................................................: >55 bar
Temperature range...............................................................: +0°C +60°C
Extinguishing agent A.F.F.F............................................:2% Sealfire ®
Propellant cylinder........................................................................................: N2
Complete replacement spare parts
31303_18 Including:
Sealfire, 3 lt N2 cylinder, O-ring 2” and 4”, washer
rings,filter+coupling, safety seal.
11 17 6 8
Stainless
Steel
Cylinder
Detachable frame
No welding on the
cylinder ensure better
and higher safety.
18
14
5
13
3
4
10
1
9
15
16
Welded frame.
The axe and carring
handle are welded on
the cylinder body.
7 12
OPTIONAL
Large cap 4” with
1/4” safety valve,
vent valve, gauge.
a.b.s. S.r.l. (Milan) Italy
Lombardia Street 310, 20861 Brugherio
Tel. +39 039 839631 - Fax. +39 039 8396349
e-mail:info@absfire.it - www.absfire.it - Capital 2.000.000
17
Technical specifications
2
STANDARD
2” cap with
1/4” safety valve.
The use of non original spare parts may cause malfunctions loss
Maintenance and Guarantee
Nominal charge........................................................................................: 150 lt
Discharge time ~................................................................................: 150 sec
Jet length ~......................................................................................................: 8 m
Dimensions
Height ~................................................................................................: 1380 mm
Width ~.................................................................................................. : 700 mm
Depth ~.................................................................................................. : 900 mm
Weight ~......................................................................................................: 230 kg
The SOLAS Convention Chapter II-2 part C lays the obligation
of the provision of replacement spare change for the 100%
for the first 10 extinguishers installed, while the remaining fire
extinguishers are needed the 50% of the replacement spare.
The maximum quantity of refills shown are 60.
Technical data are subject to modification
for improvements without prior notice
Spare part list
Pos. Description Code Q.ty
1 Cylinder (lt 180) Stainless steel 27006 1
WWW.absfire.it
2 Valve G.2” with safety valve 21822 1
3 3/4” Handwheel valve 21818_1 1
4 3 lt N2 cylinder PED-CE (160 bar) 20108 1
5 Adaptor for N2 cylinder 20008 1
6 Foam nozzle light alloy 21006 1
7 Trigger valve brass 3/4” 66030 1
8 Discharge hose L 5 mt 20649 1
On request hose L 10 mt 20649_1
9 Ø 400 mm wheels rubber and plastic 21941 2
10 Sealfire 33395 3 lt
11 Washer ring teflon 3/4” - 13x24x2 21049 1
12 Manometer Ø 27 Brass 21522 1
13 Safety pin 21018 1
14 Washer ring 11,6x18,5x2 21021_1 1
15 Siphon tube 21730 1
16 3/4” Filter + coupling 83011 + 20024 1
17 Safety valve 28024 1
18 Cap for protection foot cylinder 28073 2
3-4 Spare charged Cartridge 3 L-160 bar 41231_2
Available antifreeze -20°C or -30°C
The family 14284_10 include more than one type of version.
14284_11 - Cap 4” - Welded frame - Stainless steel cylinder.
14284_12 - Cap 4” - Detachable frame - Stainless steel cylinder.
14284_13 - 2” valve - Welded frame - Cylinder painted inside.
14284_14 - Cap 4” - Welded frame - Cylinder painted inside.
14284_15 - Cap 4” - Detachable frame - Cylinder painted inside.
14284_16 - 2” valve - Detachable frame - Cylinder painted inside.
14284_17 - 2” valve - Detachable frame - Stainless steel cylinder.
In accordance with the Directive 96/98/EC by the SOLAS 74
convention, resolutions and circulars of the IMO, EN 1866-1:2007
on the Annex A.1/3.52 Directive 2008/67/CE of the certificate and
Notified by CSI SpA - No 0497.
Maintenance must be made periodically by, trained and certified staff, according to the local regulations of the country where it is located.
The extinguisher is guaranteed for 12 months from the date of the supply. The guarantee includes, repairing or replacement, as manufacturer
option. Unit must be sent back to the factory free of charge, only when authorized written agreement with our sales office has been reached.
The guarantee expires in case of tampering and bad maintenance made by not-authorized staff, or transport damages.
It must be recharged only by staff authorized and certified by a.b.s. S.r.l., use only genuine original spare parts.
Data Sheet Code Date Check Rev Pag.
Fire Extinguisher 14284_10 26/09/11 RB 1/AS 2/2