You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MSD</strong> SYSTEMS Installing to an <strong>MSD</strong> Distributor.<br />
NOTE: SEE FIGURE 2 FOR COMMON MAGNETIC PICKUPS.<br />
GM IGNITIONS Wiring with an <strong>MSD</strong> Wiring Harness.<br />
TO<br />
TACH<br />
<strong>CDI</strong> MULTI-SPARK<br />
IGNITION<br />
PN 5520<br />
WWW.STREET-FIRE.COM<br />
TO<br />
TACH<br />
®<br />
®<br />
<strong>CDI</strong> MULTI-SPARK<br />
IGNITION<br />
PN 5520<br />
WWW.STREET-FIRE.COM<br />
GRAY<br />
GRAY<br />
SMALL<br />
RED<br />
WHITE<br />
SMALL RED<br />
INSTALLATION INSTRUCTIONS<br />
WHITE (NOT USED)<br />
ORANGE<br />
GM IGNITIONS Wiring a Dual Connector Coil.<br />
BOTH PINKS<br />
TO<br />
TACH<br />
®<br />
<strong>CDI</strong> MULTI-SPARK<br />
IGNITION<br />
PN 5520<br />
WWW.STREET-FIRE.COM<br />
GRAY<br />
RED<br />
RED<br />
SMALL<br />
RED<br />
WHITE<br />
ORANGE<br />
BLACK<br />
BLACK<br />
DISTRIBUTOR<br />
WITH<br />
MAGNETIC PICKUP<br />
NOTE: For a direct plug-in, use <strong>MSD</strong><br />
Harness PN 8876.<br />
NOTE: Cut and splice the two Pink wires<br />
(coil positive) together and connect<br />
to Orange wire of the ignition. Cut<br />
and splice the twoWhite wires (coil<br />
negative) together and connect<br />
to the White of the ignition. If the<br />
vehicle is not equipped with a<br />
factory tach, there will only be one<br />
White wire.<br />
Harness PN 8876 - Dual Connector Coil.<br />
Harness PN 8877 - 1996-on GM Vehicles.<br />
S T R E E T F I R E • www.STREET- FIRE.com • (915) 857-5200 • FAX (915) 857-3344