26.03.2013 Views

Industrial Lighting - THORN Lighting

Industrial Lighting - THORN Lighting

Industrial Lighting - THORN Lighting

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Zone 2 Fluorescent<br />

A linear twin lamp fluorescent<br />

luminaire suitable for areas<br />

where concentration of<br />

flammable gases or combustible<br />

dust are present<br />

Ordering Guide Lamps to be ordered separately.<br />

www.thornlighting.com.au<br />

• Electronic Ballast provides<br />

high luminous efficiency, lower<br />

energy consumption and<br />

longer service life of the lamps<br />

• Emergency operation can be<br />

set for 2 hour duration<br />

• Central locking system<br />

operated by standard SW13<br />

hex socket key enables fixture<br />

to be opened from one point<br />

of housing<br />

• Diffuser hinges from either side<br />

and is also designed to act<br />

as a convenient lamp support<br />

when open to simplify lamp<br />

replacement<br />

• IIC gas group<br />

• Exn compliant<br />

Description ILCOS Code Socket Wt (kg) Temp Class SAP Code<br />

ZONE 2 FLUORESCENT 2X18W HF FD G13 4.0 T4 96064663<br />

ZONE 2 FLUORESCENT 2X18W HF E2M FD G13 6.0 T4 96064664<br />

ZONE 2 FLUORESCENT 2X36W HF FD G13 6.0 T4 96061948<br />

ZONE 2 FLUORESCENT 2X36W HF E2M<br />

Accessory<br />

FD G13 8.0 T4 96064665<br />

ZONE 1/2 FLUORESCENT CEILING BRA KIT<br />

HF - High frequency, E2M - 2 hour maintained emergency<br />

96064666<br />

1632<br />

1660<br />

T26 (FD) G13 18-36W<br />

AS/NZS60598<br />

IP66<br />

Class I Electrical<br />

Materials/Finish<br />

Body: fibreglass reinforced<br />

polyester (GRP), grey.<br />

Diffuser: moulded<br />

polycarbonate, clear.<br />

Gasket: polyurethane foam.<br />

Cable entry: brass.<br />

Installation/Mounting<br />

Surface mounted with through<br />

wiring terminal block at each<br />

end of the fixture internally wired<br />

(4mm²) to facilitate ease of<br />

connection. 4 x M20 threaded<br />

metal entries. Ceiling mount<br />

bracket accessory available for<br />

increased support.<br />

Specification<br />

To specify state:<br />

Twin lamps linear fluorescent<br />

luminaire suitable for Zone 2,<br />

Zone 21 & 22 T4 hazardous<br />

applications.<br />

As Thorn Zone 2 Fluorescent.<br />

Compliances<br />

Australian Standard 2238<br />

Electrical Equipment for<br />

Explosive Atmosphere.<br />

Certificate of Compliance Aus<br />

Ex 3723. Australian Standard<br />

1939 Degrees of Protection of<br />

Electrical Equipment IP66.<br />

120°<br />

188<br />

46<br />

150°<br />

Cd/1000lm<br />

200 150°<br />

65<br />

130<br />

50<br />

90° 90°<br />

60°<br />

30°<br />

Zone 2 Fluorescent<br />

Lamp: 2x18W T26<br />

150<br />

100<br />

0°<br />

30°<br />

120°<br />

60°<br />

<strong>Lighting</strong> people and places<br />

177<br />

INDUSTRIAL<br />

HAZARDOUS AREA LUMINAIRES

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!