Multi-point Lock MVS 900 - Grundmann

Technical details
MVS 900 counterpressure bolt MVS 900 tapered bolts «S» – hardened MVS 900 conical bolts «K» – hardened
→ The toggle joint gear increases the closing force
in the end phase of the locking procedure.
→ The counterpressure lock prevents the locking
elements from being pushed back from the out
side. The lock must be locked 2x.
→ In locked position, the pressure is released on
the toothed gear and there is no load on the
cylinder.
The counterpressure bolt permits problem-free
use of rotary knob cylinders.
→ For wooden door frames.
→ Matching strike plate art.no. 6/PSR.
→ Contact of door leaf on door frame
ca. 6 mm.
→ Adjustable contact pressure by rotating the
locking bolts.
→ For steel door frames without reinforcement.
→ Low deformation values of frame under loading.
→ Cannot be used for strike plates art.no. 6/PSR.
→ In standing-out position all bolts can be easily
exchanged.
Product overview
MVS 903S MVS 903K MVS 905S MVS 905K MVS 913 MVS 915 MVS 915T
for standard steel frames MVS 903K
lock with triple locking and conical bolts «K»
with latch lever, without strike plate
incl. cylinder fixing screws and
various fixing screws
backset- and handed left/right-data required
Note: Do not use conical bolts «K» in combination
with strike plates 6/PSR.
for wooden door frames MVS 903S
lock with triple locking and tapered bolts «S»
with latch lever, without strike plate
incl. cylinder fixing screws and
various fixing screws
backset- and handed left/right-data required
for standard steel frames MVS 905K
lock with 5x locking and conical bolts «K»
with latch lever, without strike plate
incl. cylinder fixing screws and
various fixing screws
backset- and handed left/right-data required
Note: Do not use conical bolts «K» in combination
with strike plates 6/PSR.
for wooden door frames MVS 905S
lock with 5x locking and tapered bolts «S»
with latch lever, without strike plate
incl. cylinder fixing screws and
various fixing screws
backset- and handed left/right-data required
for wooden door frames MVS 913
lock with triple locking and tapered bolts «S»
with latch lever
incl. strike plate art.no. 3/PSR and 6/PSR
incl. cylinder fixing screws and
various fixing screws
backset- and handed left/right-data required
for wooden door frames MVS 915
lock with 5x locking and tapered bolts «S»
with latch lever
incl. strike plate art.no. 3/PSR and 6/PSR
incl. cylinder fixing screws and
various fixing screws
backset- and handed left/right-data required
for wooden door frames MVS 915T
lock with 4x locking, integrated door catch and tapered
bolts «S» and latch lever
incl. strike plate art.no. 3/PSR, 6/PSR and 6/TSR
incl. cylinder fixing screws and
various fixing screws
backset- and handed left/right-data required, together
with door opening direction (inwards/outwards)
The integrated door catch unit permits the door to
be left ajar with a locking hook. Additional screw-on
lock with cylinder is not required.
Forend-extensions for MVS 990 and MVS 995 see
page 393.
Grundmann | WG | Anti-burglary Locks 193
ANTI-
BURGLARY
FITTINGS