Operating and installation instructions Frost-free freezer FN ... - Miele
Operating and installation instructions Frost-free freezer FN ... - Miele
Operating and installation instructions Frost-free freezer FN ... - Miele
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installing in a side-by-side combination<br />
To avoid a build-up of condensation<br />
<strong>and</strong> resultant damage, refrigerators <strong>and</strong><br />
<strong>free</strong>zers should not normally be<br />
installed side-by-side.<br />
However, this appliance has side wall<br />
heating, <strong>and</strong> can be installed<br />
side-by-side with certain other <strong>Miele</strong><br />
appliances.<br />
Your dealer will be able to advise<br />
you on which models are suitable.<br />
Installation<br />
^ This appliance must be installed to<br />
the left of any refrigerator when<br />
viewed from the front. The side wall<br />
heating in the right-h<strong>and</strong> wall is<br />
designed to prevent the build-up of<br />
condensation between the two<br />
appliances.<br />
^ Place the two appliances as close as<br />
possible to their final position so that<br />
they can be aligned for any<br />
unevenness in the floor. The back of<br />
the appliances still need to be kept<br />
accessible to complete the<br />
<strong>installation</strong>.<br />
34<br />
Joining the two appliances<br />
together<br />
You will need a spirit level,<br />
spanners, a torque screwdriver <strong>and</strong><br />
a socket wrench.<br />
^ Before starting, peel off any<br />
protective foil from the appliance<br />
casing.<br />
^ Place the appliances next to one<br />
another so that the fronts are aligned,<br />
leaving a gap of 10 mm between<br />
them.<br />
^ Align both appliances using a spirit<br />
level.<br />
– Align front feet a using a spanner<br />
b.