Bulletin 1728F-804: Specifications and Drawings for 12.47/7.2 kV ...

BULLETIN 1728F-804: INDEX (Continued)
SECTION CATEGORY DESCRIPTIONS
W WOOD POLES, CROSSARMS AND BRACES
Index W
Construction Specifications for Poles and Crossarms
Pole Setting Depths (Table)
Pole and Crossarm Guides and Assembly Drawings
Y VOLTAGE ALTERATION EQUIPMENT ASSEMBLY UNITS
Index Y
Voltage Alteration Equipment Construction Drawings
EXHIBITS
1 CALCULATIONS AND TABLES OF MAXIMUM LINE ANGLES
Calculation of Maximum Line Angles
Table I: Maximum Line Angles (Pin Insulators) - 500 lbs./Conductor
Table II: Maximum Line Angles (Pin Insulators) - 750 lbs./Conductor
Table III: Maximum Line Angles (Pin Insulators) - 1,000 lbs./Conductor
Table IV: Maximum Line Angles (Pin Insulators) - 1,500 lbs./Conductor
Table V: Maximum Line Angles (Pin Insulators) - 2,000 lbs./Conductor
Table VI: Maximum Line Angles (Spool Insulators) - 1,500 lbs./Conductor
Table VII: Maximum Line Angles (Spool Insulators) - 2,250 lbs./Conductor
2 LONGITUDINAL LOADING ON CROSSARM ASSEMBLIES
TABLE A: Permitted Unbalanced Conductor Tension - (1 phase/side of pole)
TABLE B: Permitted Unbalanced Conductor Tension - (2 phases/side of pole)
3 DISPOSITION OF ASSEMBLIES IN BULLETIN 50-3 (D 804)
4 NEW ASSEMBLIES AND GUIDE DRAWINGS IN BULLETIN 1728F-804
5 RUS STANDARD FORMAT AND MEANING OF OVERHEAD
DISTRIBUTION ASSEMBLY NUMBERS
6 TABLE OF SELECTED SI TO METRIC CONSVERSIONS