Policies, Terms And Conditions Of Sale - WM Coffman
Policies, Terms And Conditions Of Sale - WM Coffman
Policies, Terms And Conditions Of Sale - WM Coffman
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Policies</strong>, <strong>Terms</strong> and <strong>Conditions</strong> of <strong>Sale</strong><br />
The following apply to all <strong>WM</strong> <strong>Coffman</strong> customers:<br />
TO ORDER<br />
Provided you meet the qualifying criteria, a sales representative will<br />
guide you through the set up process. You will be granted a multiplier<br />
code to enter on our electronic price list. When you’re ready to order,<br />
simply email, fax or call our customer service department during the<br />
business hours stated on the back cover.<br />
PRICING<br />
Prices are derived via a multiplier system (set<br />
up at the time of becoming a customer)<br />
and may be reviewed or adjusted to<br />
accommodate for market volatility.<br />
Prices shown on invoices are final<br />
and must be paid accordingly.<br />
TERMS<br />
Subject to credit<br />
approval, payment<br />
terms are Net 30<br />
after the date of the<br />
invoice.<br />
SHIPMENT<br />
Orders will be<br />
processed for<br />
shipment from<br />
one of our two<br />
Distribution Centers<br />
(Austell, GA and<br />
Plano, TX). Shipping<br />
charges are pre-paid<br />
and added to invoices<br />
unless other arrangements<br />
have been pre-approved.<br />
Freight quotes are estimates<br />
and subject to change based on<br />
actual weight at time of shipment.<br />
WARRANTY<br />
For a limited period of one year from date of shipment (12 months),<br />
<strong>WM</strong> <strong>Coffman</strong> products are warranted to be free from manufacturing<br />
defects in material and workmanship (please refer to <strong>WM</strong> <strong>Coffman</strong><br />
Product Specifications for a list of natural variances acceptable<br />
within our family of products). If found to be defective by us, such<br />
products will be exchanged or credited at the customer’s option.<br />
Do not return merchandise without prior approval. <strong>WM</strong> <strong>Coffman</strong><br />
Resources, their employees, servants or agents shall not be<br />
responsible for the improper use of our products. Labor charges<br />
and/or damage incurred during installation, repair or replacement<br />
as well as incidental and consequential damages are excluded. No<br />
other warranties or responsibilities for safety or performance are<br />
either expressed or implied. A complete Limited One Year Warranty<br />
2<br />
statement is available to you and your customers in compliance<br />
with the Magnuson-Moss Warranty Act of 1975. All stair parts are<br />
for interior use and installation only- unless otherwise stated in the<br />
product description.<br />
RETURNS AND CANCELLATIONS<br />
Prior approval must be obtained before returning any<br />
merchandise. All returns are limited to merchandise purchased<br />
during the past 90 days and must be in the original box and be<br />
in good, saleable condition. Merchandise approved for return<br />
is subject to a 25% Restocking Fee. Stock returns will<br />
additionally require a re-purchase of equal value<br />
at the time of the return. Merchandise<br />
must be returned freight prepaid.<br />
Items which have been installed,<br />
painted, or modified for any<br />
reason may not be returned.<br />
In order to insure proper<br />
credit and acceptance of<br />
returns, a <strong>WM</strong> <strong>Coffman</strong><br />
supplied Return<br />
Goods Authorization<br />
number should<br />
be indicated on<br />
returns. RGA is<br />
valid for 30 days.<br />
After an order<br />
has been staged<br />
for shipping<br />
no changes or<br />
modifications are<br />
allowed unless<br />
approved by<br />
customer service.<br />
PAYMENTS<br />
Remittances are payable in U.S. Currency to:<br />
<strong>WM</strong> <strong>Coffman</strong> Resources, LLC<br />
PO Box 677351<br />
Dallas, TX 75267-7351<br />
CLAIMS<br />
SPECIAL ORDERS<br />
Orders for Special or<br />
Custom Parts are not subject<br />
to return or cancellation. A 50%<br />
deposit may be required on any<br />
custom order.<br />
Claims for shortages or manufacturing defects must be made to <strong>WM</strong><br />
<strong>Coffman</strong> within 10 calendar days of the receipt of order. Please verify<br />
counts or identify damages before signing a Bill of Lading receipt.<br />
<strong>WM</strong> <strong>Coffman</strong> is not responsible for shortages unless noted on the<br />
delivery receipt/ Bill of Lading.
ABZ<br />
Antique Bronze<br />
SOLID: A traditional<br />
FORGED construction<br />
AN<br />
Antique Nickel<br />
BLK<br />
Flat Black<br />
Iron Finishes<br />
PC<br />
Gray / Black<br />
LITE IRON: HOLLOW CORE design reduces<br />
weight while maintaining strength.<br />
Wood Species<br />
3<br />
Finishes / Species<br />
ORB<br />
Oil Rubbed<br />
Bronze<br />
Matte Phospate<br />
availability<br />
ORC<br />
Oil Rubbed<br />
Copper<br />
Alder Beech Cherry Maple Oak Poplar<br />
Selected Primed Newels and Balusters available.<br />
SAT<br />
Satin Black
IRON<br />
Iron Collection<br />
Mediterranean<br />
2760 / M133<br />
No AN<br />
2768 / M330<br />
No AN<br />
2798 / M135<br />
No AN<br />
2761 / M134<br />
No AN<br />
2990 / M305<br />
All Finishes<br />
2996 / M100<br />
No PC-Lite,<br />
No AN<br />
4<br />
2762 / M136<br />
No AN<br />
2991 / M308<br />
All Finishes<br />
2997 / M110<br />
No PC-Lite,<br />
No AN<br />
2763 / M137<br />
No AN<br />
2792 / M310<br />
No AN<br />
2998 / M120<br />
No PC-Lite,<br />
No AN<br />
Matte Phosphate Solid Iron Lite Iron<br />
2766 / M131<br />
No AN<br />
2796 / M309<br />
No AN<br />
2999 / M130<br />
No PC-Lite,<br />
No AN<br />
2767 / M132<br />
No AN<br />
2797 / M303<br />
No AN<br />
2995 / M90<br />
No PC-Lite,<br />
No AN
Solid Iron Lite Iron<br />
2970 / R543<br />
Only BLK<br />
2775 / R600<br />
No AN<br />
2971 / R540<br />
Only BLK<br />
2595 / M651<br />
No AN<br />
2770 / R601<br />
No AN<br />
2972 / R550<br />
Only BLK<br />
2596 / M652<br />
No AN<br />
2771 / R602<br />
No AN<br />
2973 / R200<br />
Only BLK<br />
5<br />
2597 / M653<br />
No AN<br />
2772 / R611<br />
No AN<br />
2974 / R210<br />
Only BLK<br />
2598 / M650<br />
No AN<br />
2773 / R612<br />
No AN<br />
2975 / R220<br />
Only BLK<br />
Iron Collection<br />
Venetian 5/8” Round<br />
2976 / R225<br />
Only BLK<br />
Shown: Detail 2598 Baluster<br />
Round 1/2”<br />
Round<br />
9/16”<br />
IRON
IRON<br />
Iron Collection<br />
Twist & Basket<br />
Versatile<br />
Ribbon<br />
1/2"<br />
18"<br />
3"<br />
23"<br />
44"<br />
2550<br />
2550 / 1TW<br />
All Finishes<br />
1/2"<br />
44"<br />
2555 2555/<br />
PLA<br />
All Finishes<br />
1/2"<br />
18"<br />
5"<br />
21"<br />
44"<br />
2560 2560 / 1RIB<br />
All Finishes<br />
1/2"<br />
18"<br />
3 1/4"<br />
6"<br />
16 3/4"<br />
44"<br />
2551 / 2TW<br />
All Finishes<br />
1/2"<br />
18"<br />
26"<br />
44"<br />
2556<br />
2556<br />
/ 1KNUC<br />
All Finishes<br />
No AN - Lite<br />
1/2"<br />
18"<br />
3 5/8"<br />
5 1/2"<br />
16 7/8"<br />
44"<br />
2561 / 2RIB<br />
All Finishes<br />
18"<br />
6<br />
18"<br />
2 1/4"<br />
1/2"<br />
5 3/4"<br />
6"<br />
3 7/8"<br />
4 3/4"<br />
3 7/8"<br />
6"<br />
13 3/4"<br />
44"<br />
2552 2552/<br />
1BASK<br />
All Finishes<br />
1/2"<br />
18"<br />
9"<br />
17"<br />
44"<br />
2557<br />
2557 / 2KNUC<br />
All Finishes<br />
No AN - Lite<br />
6"<br />
1/2"<br />
8 7/8"<br />
5 1/2"<br />
4"<br />
1 5/8"<br />
1 5/8"<br />
5 1/2"<br />
16 7/8" 44"<br />
2562 / M190<br />
All Finishes<br />
2 1/4"<br />
1/2"<br />
18"<br />
3 7/8"<br />
4 3/4"<br />
17 3/8"<br />
44"<br />
2553 / 2BASK<br />
All Finishes<br />
18"<br />
1/2"<br />
15"<br />
6"<br />
23"<br />
44"<br />
2558<br />
2558<br />
2KNUC1BASK<br />
All Finishes<br />
No AN - Lite<br />
18"<br />
6"<br />
1/2"<br />
7 5/8"<br />
4"<br />
12 3/4"<br />
4"<br />
15 5/8" 44"<br />
2563 / M200<br />
All Finishes<br />
Matte Phosphate<br />
1/2"<br />
18"<br />
11"<br />
15"<br />
1/2"<br />
44"<br />
44"<br />
2554<br />
2554 / ITW22 2960 2960/<br />
M340<br />
No AN Only BLK SAT ABZ<br />
Only BLK SAT in Lite<br />
2968<br />
2968<br />
/ WAVE<br />
All Finishes<br />
18"<br />
2 1/4"<br />
1/2"<br />
6"<br />
5 1/2"<br />
4 1/8"<br />
4 3/4"<br />
23 5/8"<br />
2962 / M80<br />
All Finishes<br />
Solid Iron Lite Iron<br />
44"<br />
15"<br />
18"<br />
7"<br />
1/2"<br />
1/2"<br />
18"<br />
8"<br />
6"<br />
12"<br />
15 3/4"<br />
4 1/2"<br />
44"<br />
44"<br />
23 3/4"<br />
2969 / KNOT<br />
Only BLK ABZ<br />
2 1/4"<br />
1/2"<br />
18"<br />
3 7/8"<br />
4 3/4"<br />
17 3/8"<br />
44"<br />
2963 2963 / M85<br />
All Finishes
Matte Phosphate<br />
2580 / M301<br />
All Finishes<br />
2981 / M311<br />
Only BLK<br />
Solid Iron Lite Iron<br />
2581 / M601<br />
No AN<br />
2982 / M331<br />
No PC<br />
2570 / M140<br />
All Finishes<br />
2582 / M325<br />
No AN<br />
2983 / M312<br />
Only BLK<br />
2571 / M150<br />
All Finishes<br />
2583 / M326<br />
No AN<br />
2984 / M332<br />
Only BLK<br />
7<br />
2572 / M160<br />
All Finishes<br />
2584 / M321<br />
No AN<br />
2575 / M143<br />
All Finishes<br />
2585 / M501<br />
All Finishes<br />
Iron Collection<br />
Gothic<br />
Scroll<br />
IRON
IRON<br />
Shown: 2852 Baluster, 2853 Baluster,<br />
2392 Flat Shoe.<br />
Iron Collection<br />
Medallion<br />
4” Medallions for use in Medallion Balusters<br />
2920 / ME03<br />
Only BLK<br />
Mega<br />
2923 / ME07<br />
Only BLK<br />
2921 / US05<br />
Only BLK<br />
2857<br />
MEGA-2KNUC<br />
No AN<br />
2924 / ME07PB<br />
Only BRASS Finish<br />
2850<br />
MEGA-1TW<br />
No AN<br />
2881<br />
MEGA-601<br />
No AN<br />
2922 / ME08<br />
Only BLK<br />
2851<br />
MEGA-2TW<br />
No AN<br />
2885<br />
MEGA-501<br />
No AN<br />
8<br />
Medallion Balusters have 1/2” square tops.<br />
2930 / M401<br />
Only BLK<br />
2852<br />
MEGA-1BASK<br />
No AN<br />
Belly<br />
Belly Balusters<br />
have 1/2”<br />
square tops.<br />
2931 / M402<br />
Only BLK<br />
2853<br />
MEGA-2BASK<br />
No AN<br />
2986<br />
PLA40-BLY<br />
No AN<br />
Matte Phosphate<br />
2932 / M408<br />
Only BLK<br />
2855<br />
MEGA-PLA<br />
No AN<br />
2987<br />
ITW40-BLY<br />
No AN<br />
Solid Iron Lite Iron<br />
2933 / M411<br />
Only BLK<br />
2856<br />
MEGA-1KNUC<br />
No AN<br />
2988<br />
1BASK40-BLY<br />
No AN
Solid Iron Lite Iron<br />
2650<br />
KW14-1TW<br />
Only SAT, PC, ORB<br />
2651<br />
KW14-2TW<br />
Only SAT, PC, ORB<br />
2490 / M590<br />
No AN<br />
4091-KIT<br />
Iron Panel and Cap Kit<br />
No AN<br />
Use with C-4091-IP<br />
Box Newel<br />
(See Page 11)<br />
2652<br />
KW14-1BASK<br />
Only SAT, PC, ORB<br />
2450 / Newel<br />
NEWL-BASK<br />
All Finishes<br />
2653<br />
KW14-2BASK<br />
Only SAT, PC, ORB<br />
2491 / M390<br />
No AN<br />
2452 / Newel<br />
NEWL-TW<br />
All Finishes<br />
2685<br />
KW14-M501<br />
Only SAT, PC, ORB<br />
9<br />
2940 / Newel<br />
NEWL-140<br />
No AN<br />
2492 / M555<br />
No AN<br />
2942 / Newel<br />
NEWL-RIB<br />
All Finishes<br />
Iron Collection<br />
Knee Wall<br />
Shown: 2685 Knee Wall Scroll, 2555 Baluster,<br />
2350 Rake Collar.<br />
Decorative Panels<br />
Decorative Panels have 1/2”<br />
Square Tops<br />
Newels<br />
Shown: Detail 2450 Newel<br />
IRON
IRON<br />
Iron Collection<br />
2340 / FSH01<br />
Flat Shoe<br />
All Finishes<br />
2910 / SCR04<br />
Winged Shoe<br />
All Finishes<br />
2341 / H03<br />
Flat Shoe<br />
All Finishes<br />
2390<br />
MEGA-PSH08<br />
Pitch Shoe<br />
with Set Screw<br />
No AN<br />
Shoe Options 1/2”<br />
2342 / M06<br />
Tall Shoe<br />
with Set Screw<br />
All Finishes<br />
2911 / M020<br />
Round Scalloped<br />
Shoe<br />
No ORC, ORB, AN<br />
Shoe Options 9/16”<br />
2351 / H05P<br />
Pitch Shoe<br />
with Set Screw<br />
All Finishes<br />
2391<br />
MEGA-FSH08<br />
Flat Shoe<br />
No AN<br />
2350 / PSH02<br />
Pitch Shoe<br />
with Set Screw<br />
All Finishes<br />
2912 / M022<br />
Square<br />
Scalloped Shoe<br />
Only BLK, PC<br />
2914 / H04<br />
Winged Shoe<br />
All Finishes<br />
MEGA Shoe Options 3/4”<br />
2392<br />
MEGA-M08<br />
Flat Shoe<br />
with Set Screw<br />
No AN<br />
2345 / AK01<br />
Adj. Knuckle<br />
All Finishes<br />
10<br />
Adjustable Knuckles with Set Screw<br />
2346 / AK02<br />
Fluted Barrel<br />
All Finishes<br />
2347 / AK03<br />
Urn<br />
All Finishes<br />
Universal Remodeling Shoes 1/2” and 9/16”<br />
2330 / RM301<br />
Square Shoe<br />
No AN<br />
2915 / H06<br />
Tall Shoe<br />
with Set Screw<br />
All Finishes<br />
2319<br />
MEGA-RD208<br />
Round Flat<br />
Shoe<br />
No AN<br />
Job-Lot Epoxy Adhesive System<br />
2905<br />
Adhesive Kit<br />
5 oz. Adhesive<br />
Cartridge and<br />
Nozzle to be<br />
2906<br />
used in standard<br />
Extra Nozzle for 2905<br />
caulking gun.<br />
(Approximately 50 balusters per tube. Open work time - 6 minutes)<br />
596000<br />
Tube Iron<br />
Insert - Polymer<br />
2901 / F-300<br />
11oz. Epoxy (Approximately 100 balusters<br />
per tube. Open work time - 25 minutes)<br />
2902 / F-101<br />
Injector Tool<br />
2903<br />
F-120<br />
Nozzle<br />
for 2901<br />
2331 / RM201<br />
Round Shoe<br />
No AN<br />
2916 / R07F<br />
Base Shoe<br />
Only BLK<br />
2329<br />
MEGA-SQ308<br />
Square Flat<br />
Shoe<br />
No AN<br />
2303<br />
2332 / RM020<br />
Round Scalloped Shoe<br />
No AN<br />
Shoe Options 9/16” Dia.<br />
2917 / R06P<br />
Pitch Shoe<br />
with Set Screw<br />
Only BLK<br />
2375 / R10<br />
Round Shoe<br />
5/8” Round<br />
Baluster<br />
No AN<br />
Matte Phosphate<br />
2348 / AK05<br />
Tall Barrel<br />
All Finishes<br />
Solid Iron Lite Iron<br />
2349 / AK04<br />
Fluted Deco<br />
All Finishes<br />
Shoe Options 1/2” Dia.<br />
2370 / R08F<br />
Base Shoe<br />
No AN 2371 / R09P<br />
2918 / RAK03<br />
Adj. Knuckle<br />
with Set Screw<br />
Only BLK<br />
2919 / RD201<br />
Round Flat<br />
Shoe<br />
All Finishes<br />
Pitch Shoe<br />
with Set Screw<br />
No AN<br />
Shoe 5/8” Dia. Universal Shoes 1/2” and 9/16”<br />
2301<br />
2302<br />
2929 / SQ301<br />
Square Flat<br />
Shoe<br />
All Finishes<br />
2333 / R05<br />
Round Flat<br />
Shoe<br />
Black Polymer<br />
Epoxy Glue System<br />
2360 / NC101<br />
Newel Attaching System<br />
2302 Manual Dispenser<br />
Base Collar, Shaft and Screws<br />
2301 Adhesive (Approximately<br />
All Finishes<br />
20 balusters per tube.<br />
2362 / NEWL-FSH01<br />
Open work time - 25 minutes)<br />
Flat Newel Shoe - Only<br />
2303 Mixing Nozzle (Packed 10 ea.) All Finishes
<strong>WM</strong> <strong>Coffman</strong>’s Box Newel Collection offers you the ability to enhance the<br />
appearance of your stair with an impressive and bold style that blends with any of<br />
our rail and baluster profiles.<br />
C-4091<br />
Plain<br />
4 3/4” Top Sq.<br />
6 1/4” Bottom Sq.<br />
C-4291-ADJ<br />
Adjustable 3 1/2” Sq.<br />
Shipped as 2-piece Kit<br />
C-4091-F<br />
Flute<br />
4 3/4” Top Sq.<br />
6 1/4” Bottom Sq.<br />
C-4091-FP<br />
Flat Panel<br />
4 3/4” Top Sq.<br />
6 1/4” Bottom Sq.<br />
Interchangeable Box Newel Caps<br />
The Box Newels shown on this page are<br />
shipped with Interchangeable Flat and Peak<br />
Caps and have Hollow Top Construction<br />
which allows for secure handrail installation<br />
from inside the Box Newel.<br />
C-4091-IP<br />
Interchangeable Panel<br />
4 3/4” Top Sq. / 6 1/4” Bottom Sq.<br />
Use with 4091-KIT<br />
Iron Panel and Cap Kit<br />
(See Page 9)<br />
C-4091-RP<br />
True Raised Panel<br />
4 3/4” Top Sq.<br />
6 1/4” Bottom Sq.<br />
C-4075<br />
Landing<br />
3 1/2” Sq.<br />
11<br />
Box Newels<br />
Shown: C-4091 Box Newel, C-6210 P1 Handrail,<br />
C-5601 Balusters.<br />
Shown: C-4091 Plain Box Newel<br />
Shown: C-4091-F Fluted Box Newel<br />
WOOD
WOOD<br />
Box Newels<br />
Shown: C-4095-F Fluted Box Newel, C-6110<br />
Handrail, C-7112S Up Easing, C-5151 Balusters.<br />
Shown: C-4095 Plain Box Newel<br />
Shown: C-4095-RP Raised Panel Box Newel<br />
<strong>WM</strong> <strong>Coffman</strong> provides a complete selection of Box Newels offered with<br />
complementary sized Landing Newels to provide more design flexibility.<br />
C-4095<br />
Plain<br />
6” Top Sq.<br />
7 1/2” Bottom Sq.<br />
C-4095-RP<br />
Raised Panel<br />
6” Top Sq.<br />
7 1/2” Bottom Sq.<br />
12<br />
C-4695<br />
Plain<br />
4 1/2” Sq.<br />
C-4695-RP<br />
Raised Panel<br />
4 1/2” Sq.<br />
C-4095-F<br />
Flute 6” Top Sq.<br />
7 1/2” Bottom Sq.<br />
C-4090<br />
Plain<br />
4 3/4” Top Sq.<br />
6 1/4” Bottom Sq.<br />
C-4695-F<br />
Flute<br />
4 1/2” Sq.<br />
C-4077<br />
Landing<br />
3 1/2” Sq.
Shown: C-4890 Mission Box Newel<br />
C-6700 P1 Handrail, C-5360 Balusters<br />
C-4891-FP<br />
Flat Panel<br />
6” Top Sq.<br />
7 1/2” Bottom Sq.<br />
FREE!<br />
C-4099<br />
Newel Sleeve 3 1/2”<br />
Mouldings Shipped Loose<br />
(2 Profile Options:<br />
C-4091 and C-4095)<br />
C-4691-FP<br />
Flat Panel<br />
4 1/2” Sq.<br />
C-4891-RP<br />
True Raised Panel<br />
6” Top Sq.<br />
7 1/2” Bottom Sq.<br />
C-4890<br />
Mission<br />
6” Top Sq.<br />
7 1/2” Bottom Sq.<br />
C-4690<br />
Mission<br />
4 1/2” Sq.<br />
13<br />
C-4691-RP<br />
True Raised<br />
Panel<br />
4 1/2” Sq.<br />
EZ Mount Installation System<br />
Exclusively from <strong>WM</strong> <strong>Coffman</strong>, the EZ Mount Base Block<br />
Installation System (includes block, 4 lag screws and<br />
washers) is included with all 6 1/4” and 7 1/2” Box Newels.<br />
Box Newels<br />
Shown: C-4891-FP Flat Panel Newel, C-6110 P1<br />
Handrail, C-7112S Up Easing, C-5141 Balusters.<br />
Shown: C-4891-RP True Raised Panel Box Newel<br />
Shown: C-4691-RP True Raised Panel Box Newel<br />
WOOD
WOOD<br />
Traditional Over-the-Post<br />
Shown: C-6010 Handrail, C-5015<br />
Blusters, C-4065 Starting<br />
Newel, C-7030 LH Volute,<br />
C-8010 Starting Step.<br />
Enlarged for<br />
Detail. All Long<br />
Block (LB)<br />
balusters are<br />
designed and<br />
shipped with<br />
removable pin.<br />
C-4065<br />
2 3/4” Dia.<br />
Adjustable<br />
C-4030<br />
3” Sq.<br />
C-4035<br />
3” Sq.<br />
Enlarged for<br />
Detail. All<br />
Adjustable<br />
Newels are<br />
bored and<br />
shipped with<br />
loose dowel.<br />
The Traditional Collection<br />
derives its beautiful<br />
style from the Georgian,<br />
Federal and Greek Revival<br />
periods of architecture.<br />
Graceful tapers and<br />
delicate beadwork are<br />
brought together to create<br />
a time-honored look.<br />
C-5015<br />
1 1/4” Sq.<br />
C-4038<br />
3” Sq.<br />
C-5015<br />
1 1/4” Sq.<br />
C-5040<br />
1 1/8” Dia.<br />
Newel top<br />
diameter is 1”<br />
C-4039<br />
3” Sq.<br />
C-5015<br />
1 1/4” Sq.<br />
C-5015<br />
1 1/4” Sq.<br />
C-5040 C-5040<br />
1 1/8” Dia. 1 1/8” Dia.<br />
C-4014<br />
3” Sq.<br />
Adjustable<br />
14<br />
C-5015<br />
1 1/4” Sq.<br />
C-4010<br />
3” Sq.<br />
C-5610<br />
1 1/4” Sq.<br />
C-6010<br />
C-5015<br />
1 1/4” Sq.<br />
C-4011<br />
3” Sq.<br />
C-5610<br />
1 1/4” Sq.<br />
<strong>WM</strong>-5015-LB<br />
1 1/4” Sq.<br />
PR5015RP-34<br />
C-4015<br />
3” Sq.<br />
C-5610<br />
1 1/4” Sq.<br />
C-6016 (7 piece)<br />
Bending Rail with<br />
Bending Mould<br />
<strong>WM</strong>-5015-LB<br />
1 1/4” Sq.<br />
PR5015RP-38<br />
C-5610<br />
1 1/4” Sq.<br />
C-4017<br />
3” Sq.<br />
<strong>WM</strong>-5015-LB<br />
1 1/4” Sq.<br />
PR5015RP-42<br />
C-4535<br />
3” Sq.<br />
Newel top<br />
diameter is 1”<br />
C-4019<br />
3” Sq.
C-6010 P<br />
with Fillet<br />
Newels at right are<br />
available in 2 options.<br />
For Ball Top specify (BT)<br />
C-4540<br />
3” Sq.<br />
B-48-6.5-MT<br />
C-4542<br />
3” Sq.<br />
B-54-6.5-MT<br />
C-6050<br />
Fillet<br />
C-6045<br />
Shoe Rail with<br />
Fillet<br />
C-4040<br />
3” Sq.<br />
C-4545<br />
3” Sq.<br />
B-54-10-MT<br />
C-4042<br />
3” Sq.<br />
C-4546<br />
3” Sq.<br />
B-54-13-MT<br />
C-7098<br />
1 Riser<br />
No Cap<br />
C-4045<br />
3” Sq.<br />
C-4547<br />
3” Sq.<br />
B-60-15-MT<br />
C-4046<br />
3” Sq.<br />
C-4548<br />
3” Sq.<br />
15<br />
C-7099<br />
2 Riser<br />
No Cap<br />
C-5067 C-5067 C-5067 C-5067 C-5067 C-5070 C-5070 C-5070 C-5070 C-5070<br />
1 1/4” Sq. 1 1/4” Sq. 1 1/4” Sq. 1 1/4” Sq. 1 1/4” Sq. 1 1/4” Sq. 1 1/4” Sq. 1 1/4” Sq. 1 1/4” Sq. 1 1/4” Sq.<br />
Traditional Post-to-Post<br />
C-4055 C-4046S<br />
3” Sq. 3” Sq.<br />
Ball Top not available<br />
C-4550BT<br />
3” Sq.<br />
C-4555BT<br />
3” Sq.<br />
Shown: C-6010 P Handrail,<br />
C-5067 Balusters, C-4040<br />
Starting Newel.<br />
C-4556BT<br />
3” Sq.<br />
C-5070-LB C-5070-LB<br />
1 1/4” Sq. 1 1/4” Sq.<br />
C-5067-LB<br />
1 1/4” Sq.<br />
C-5067-LB<br />
1 1/4” Sq.<br />
C-5105-LB C-5105-LB<br />
1 1/4” Sq. 1 1/4” Sq.<br />
WOOD
WOOD<br />
Classic Over-the-Post<br />
Shown: C-6210 Handrail, C-5611 Balusters, C-4210<br />
Starting Newel, C-7230 LH Volute, C-8010 Starting<br />
Step.<br />
Shown: C-4662 Newel<br />
Shown: C-4210 Newel<br />
Shown: C-5611 Baluster<br />
Inspired by the timeless appeal of Greek and Roman architecture, the Classic<br />
Collection is a blend of fine craftsmanship and purity of proportion. Balanced<br />
turnings accentuate an expertly carved urn, resulting in a profile recognized for<br />
its refined design.<br />
C-5611<br />
1 3/4” Sq.<br />
C-6210<br />
C-5611<br />
1 3/4” Sq.<br />
16<br />
C-5611<br />
1 3/4” Sq.<br />
Newel top diameters are 2 1/8”<br />
C-4662<br />
3 3/8” Dia.<br />
Adjustable<br />
C-6216<br />
Bending Rail with Bending Mould<br />
C-5611<br />
1 3/4” Sq.<br />
C-4210<br />
3 1/2” Sq.<br />
use with Starting<br />
Easing<br />
C-5611-LB<br />
1 3/4” Sq.<br />
C-4215<br />
3 1/2” Sq.<br />
Intermediate<br />
or Landing<br />
Enlarged for<br />
Detail. All Long<br />
Block (LB)<br />
balusters are<br />
designed and<br />
shipped with<br />
removable pin.<br />
C-5611-LB<br />
1 3/4” Sq.
C-6007<br />
Fillet<br />
C-7298<br />
1 Riser<br />
No Cap<br />
C-4001<br />
3 1/2” Sq.<br />
C-6006<br />
Shoe Rail with<br />
Fillet<br />
C-4002<br />
3 1/2” Sq.<br />
C-7299<br />
2 Riser<br />
No Cap<br />
C-4003<br />
3 1/2” Sq.<br />
C-6210 P1<br />
with Fillet<br />
C-4003 L<br />
3 1/2” Sq.<br />
Enlarged for<br />
Detail Enlarged for<br />
Detail<br />
C-4007<br />
3 1/2” Sq.<br />
C-4008<br />
3 1/2” Sq.<br />
C-4009<br />
3 1/2” Sq.<br />
C-4004*<br />
3 1/2” Sq.<br />
Newel Top Detail<br />
C-4005*<br />
3 1/2” Sq.<br />
C-5601<br />
1 3/4” Sq.<br />
17<br />
C-5601<br />
1 3/4” Sq.<br />
C-4006<br />
3 1/2” Sq.<br />
No BT<br />
Classic Post-to-Post<br />
Shown: C-6210 P1 Handrail, C-5601 Balusters,<br />
C-4240 Starting Newel.<br />
C-5601<br />
1 3/4” Sq.<br />
Newel Top Detail<br />
C-4240<br />
3 1/2” Sq.<br />
C-5601<br />
1 3/4” Sq.<br />
C-4242<br />
3 1/2” Sq.<br />
C-5601<br />
1 3/4” Sq.<br />
C-4245<br />
3 1/2” Sq.<br />
WOOD
WOOD<br />
Bristol Over-the-Post Bristol Post-to-Post<br />
C-5151<br />
1 3/4” Sq.<br />
C-6110<br />
C-4162<br />
3 1/4” Sq.<br />
Adjustable<br />
C-5151<br />
1 3/4” Sq.<br />
Elegant detailing and simple<br />
design gives the Bristol<br />
Collection tremendous<br />
versatility. Balusters and<br />
newels feature handsome vase.<br />
C-6116<br />
Bending Rail with Bending Mould<br />
C-5151<br />
1 3/4” Sq.<br />
C-4111<br />
3 1/4” Sq.<br />
D-48-0-PT<br />
Shown: C-6116 Bending Rail,<br />
C-5151 Balusters, C-4162<br />
Starting Newel, C-7130 LH Volute,<br />
C-7135 RH Volute.<br />
C-4115<br />
3 1/4” Sq.<br />
C-5151-LB<br />
1 3/4” Sq.<br />
C-4119<br />
3 1/4” Sq.<br />
D-ST-48<br />
C-5151-LB<br />
1 3/4” Sq.<br />
Newel top<br />
diameter is 1”<br />
18<br />
C-6006<br />
Shoe Rail<br />
with Fillet<br />
C-4172<br />
3 1/4” Sq.<br />
D-54-6.5-AT<br />
Enlarged<br />
for Detail.<br />
All Long<br />
Block (LB)<br />
balusters are<br />
designed and<br />
shipped with<br />
removable<br />
pin.<br />
C-6007<br />
Fillet<br />
C-4175<br />
3 1/4” Sq.<br />
D-54-10-AT<br />
Shown: C-6110 P1 Handrail,<br />
C-5141 Balusters, C-4172<br />
Starting Newel<br />
C-5141<br />
1 3/4” Sq.<br />
C-7199<br />
2 Riser<br />
No Cap<br />
C-5141<br />
1 3/4” Sq.<br />
C-4176<br />
3 1/4” Sq.<br />
D-54-13-AT<br />
C-6110 P1<br />
with Fillet<br />
C-5141<br />
1 3/4” Sq.<br />
C-4179<br />
6” Sq.<br />
D-6-6-60-AT
The Marion Collection provides<br />
a versatile look that easily<br />
adapts to any setting. Urns,<br />
vases and transitional carvings<br />
combine to create strong lines<br />
that enhance any home’s decor.<br />
Shown: C-6719 Handrail, C-5251<br />
Balusters, C-4257 Starting<br />
Newel, C-7730 LH Volute, C-8010<br />
Starting Step.<br />
C-6719<br />
C-5251<br />
1 3/4” Sq.<br />
Marion Over-the-Post Marion Post-to-Post<br />
C-6716<br />
Bending Rail with<br />
Bending Mould<br />
C-5251 C-5251 C-5251 C-5251-LB C-5251-LB<br />
1 3/4” Sq. 1 3/4” Sq. 1 3/4” Sq. 1 3/4” Sq. 1 3/4” Sq.<br />
Newel top<br />
diameters are 2 3/16”<br />
19<br />
Shown: C-6719 P1 Handrail, C-5241<br />
Balusters, C-4282 Starting Newel.<br />
C-5241<br />
1 3/4” Sq.<br />
C-4257 C-4272 C-4277<br />
3 1/4” Dia. 3 1/2” Sq. 3 1/2”Sq.<br />
Adjustable use with<br />
C-4282<br />
volute or<br />
3 1/2” Sq.<br />
Starting Easing<br />
C-6719 P1<br />
with Fillet<br />
C-6006<br />
Shoe Rail<br />
with Fillet<br />
C-5241<br />
1 3/4” Sq.<br />
C-4282 L<br />
3 1/2” Sq.<br />
C-6007<br />
Fillet<br />
C-5241<br />
1 3/4” Sq.<br />
C-4287<br />
3 1/2” Sq.<br />
C-7799<br />
2 Riser<br />
No Cap<br />
C-5241<br />
1 3/4” Sq.<br />
Newel Top Detail<br />
WOOD
WOOD<br />
Chippendale Over-the-Post Chippendale Post-to-Post<br />
C-5211<br />
1 3/4” Sq.<br />
Flute<br />
C-4252<br />
3 1/4” Dia.<br />
Flute<br />
Adjustable<br />
The Chippendale Collection<br />
celebrates the refined style<br />
made famous by the master<br />
furniture maker, Thomas<br />
Chippendale. Balusters and<br />
newels feature carefully-crafted<br />
flutes and graceful proportions<br />
that produce the elegant appeal<br />
of this classic design.<br />
Shown: C-6719 Handrail, C-5211<br />
Balusters, C-4252 Starting Newel,<br />
C-7730 LH Volute, C-7735 RH<br />
Volute.<br />
C-6719 C-6716<br />
Bending Rail with Bending Mould<br />
C-5211<br />
1 3/4” Sq.<br />
Flute<br />
C-5211<br />
1 3/4” Sq.<br />
Flute<br />
C-5211<br />
1 3/4” Sq.<br />
Flute<br />
Newel top<br />
diameters are 2 3/16”<br />
C-4270<br />
3 1/2” Sq.<br />
Flute<br />
use with<br />
Volute or<br />
Starting Easing<br />
C-4275<br />
3 1/2” Sq.<br />
Flute<br />
Intermediate<br />
or Landing<br />
20<br />
C-6006<br />
Shoe Rail<br />
with Fillet<br />
C-5201<br />
1 3/4” Sq.<br />
Flute<br />
Newel Top Detail<br />
C-6007<br />
Fillet<br />
C-5201<br />
1 3/4” Sq.<br />
Flute<br />
C-4280<br />
3 1/2” Sq.<br />
Flute<br />
Shown: C-6719 P1 Handrail,<br />
C-5201 Balusters, C-4280<br />
Starting Newel.<br />
C-7799<br />
2 Riser<br />
No Cap<br />
C-5201<br />
1 3/4” Sq.<br />
Flute<br />
C-4280 L<br />
3 1/2” Sq.<br />
Flute<br />
C-5201<br />
1 3/4” Sq.<br />
Flute<br />
C-6719 P1<br />
with Fillet<br />
C-4285<br />
3 1/2” Sq.<br />
Flute
Art Deco Over-the-Post Art Deco Post-to-Post<br />
Shown: C-6810 Handrail, C-5845<br />
Balusters, C-4810 Starting Newel,<br />
C-7831 Vertical Volute, C-8029<br />
Tread Brackets.<br />
C-6810<br />
C-5845<br />
1 9/16”<br />
Dia.<br />
Note: Placement<br />
of Art Deco<br />
Newels will<br />
sometimes differ<br />
from standard<br />
newel locations<br />
because of the<br />
contemporary<br />
styling of the Art<br />
Deco fittings.<br />
C-5845<br />
1 9/16”<br />
Dia.<br />
C-4862<br />
3 1/4” Dia.<br />
Adjustable<br />
C-5845<br />
1 9/16”<br />
Dia.<br />
C-4810<br />
3 1/2” Sq.<br />
use with<br />
Vertical<br />
Volute or<br />
Starting Easing<br />
Newel top<br />
diameters are 1 1/8”<br />
C-4815<br />
3 1/2” Sq.<br />
Intermediate<br />
or Landing<br />
21<br />
The Art Deco Collection<br />
replicates the sense of design<br />
that helped transform this<br />
fashionable look into an<br />
enduring style. Soft curves<br />
and elongated tapers unite<br />
to emphasize the refreshing<br />
proportions that complement so<br />
many interior decorating styles.<br />
Shown: C-6810 Handrail, C-5845<br />
Balusters, C-4840 Starting Newel,<br />
C-8029 Tread Brackets.<br />
C-6810 C-6810 C-7899<br />
2 Riser<br />
No Cap<br />
C-5845<br />
1 9/16”<br />
Dia.<br />
C-5845<br />
1 9/16”<br />
Dia.<br />
Newel Top Detail<br />
C-5845<br />
1 9/16”<br />
Dia.<br />
C-4840<br />
3 1/2” Sq.<br />
C-4845<br />
3 1/2” Sq.<br />
WOOD
WOOD<br />
Richmond Over-the-Post Richmond Post-to-Post<br />
C-6410<br />
Newel top<br />
diameters are 1”<br />
The Richmond Collection<br />
handrail features a deeply<br />
carved profile that transitions<br />
gracefully into a richly<br />
proportioned peak. Combined<br />
with bold turnings, this<br />
Collection creates a look that<br />
is pleasing to the eye.<br />
C-6416<br />
Bending Rail with Bending Mould<br />
C-4410<br />
3 1/4” Sq.<br />
C-42-0-PT<br />
Enlarged<br />
for Detail.<br />
All Long<br />
Block (LB)<br />
balusters are<br />
designed and<br />
shipped with<br />
removable pin.<br />
C-4415<br />
3 1/4” Sq.<br />
C-48-0-PT<br />
C-5341-LB<br />
1 5/8” Sq.<br />
C-4419<br />
3 1/4” Sq.<br />
C-ST-48<br />
C-5341-LB<br />
1 5/8” Sq.<br />
22<br />
C-6410 P1<br />
with Fillet<br />
C-4440<br />
3 1/4” Sq.<br />
C-48-6.5-BT<br />
C-5341-LB<br />
1 5/8” Sq.<br />
C-4442<br />
3 1/4” Sq.<br />
C-54-6.5-BT<br />
Shown: C-6410 Handrail,<br />
C-4695-F Fluted Box Newel,<br />
C-7499 Gooseneck, C-7412S Up<br />
Easing.<br />
C-6006<br />
Shoe Rail<br />
with Fillet<br />
C-5341-LB<br />
1 5/8” Sq.<br />
C-4445<br />
3 1/4” Sq.<br />
C-54-10-BT<br />
C-6007<br />
Fillet<br />
C-4446<br />
3 1/4” Sq.<br />
C-54-13-BT
Newel Top<br />
Detail<br />
C-5005<br />
1 3/4” Sq.<br />
C-4001<br />
3 1/2” Sq.<br />
C-6005 P1<br />
1 3/4” Plow<br />
with Fillet<br />
C-5005<br />
1 3/4” Sq.<br />
C-4002<br />
3 1/2” Sq.<br />
C-6007<br />
Fillet<br />
C-4003<br />
3 1/2” Sq.<br />
C-6006<br />
Shoe Rail<br />
with Fillet<br />
C-5601<br />
1 3/4” Sq.<br />
C-4003 L<br />
3 1/2” Sq.<br />
<strong>WM</strong> <strong>Coffman</strong>’s Hampton<br />
Collection offers a<br />
combination of pure straight<br />
lines, detailed carvings and<br />
bold proportions.<br />
C-5601<br />
1 3/4” Sq.<br />
Enlarged for<br />
Detail<br />
C-4004*<br />
3 1/2” Sq.<br />
C-5601<br />
1 3/4” Sq.<br />
C-4005*<br />
3 1/2” Sq.<br />
23<br />
C-5601<br />
1 3/4” Sq.<br />
Hampton Post-to-Post<br />
C-4006<br />
3 1/2” Sq.<br />
No BT<br />
Shown: C-6005 P1 Handrail, C-6006 Shoe Rail,<br />
C-5005 Balusters, C-4004 Starting Newels.<br />
C-5601<br />
1 3/4” Sq.<br />
C-4070<br />
3” Sq.<br />
C-5360<br />
1 3/4” S4S<br />
Newel Top Detail<br />
C-4072<br />
3” Sq.<br />
C-5360<br />
1 3/4” S4S<br />
C-4073<br />
3” Sq.<br />
C-4073 L<br />
3” Sq.<br />
WOOD
WOOD<br />
Craftsman Post-to-Post<br />
Shown: C-6700 P1 Handrail, C-5360 Balusters,<br />
C-4076 Starting Newel.<br />
Shown: C-4074 EE Newel<br />
<strong>WM</strong> <strong>Coffman</strong>’s Craftsman Collection of newels, balusters and handrails offer the<br />
contemporary look of modern components. The straight lines and eased edges<br />
will please the eye and the touch.<br />
Shown: C-4076 Newel<br />
C-4074<br />
3” Sq.<br />
C-4076<br />
3 1/2” Sq.<br />
24<br />
C-4074 EE<br />
3” Sq.<br />
C-4076 EE<br />
3 1/2” Sq.<br />
Top View showing<br />
Eased Edge<br />
C-5060<br />
1 1/4” S4S<br />
C-5360<br />
1 3/4” S4S<br />
C-6700 P<br />
with Fillet<br />
C-6001<br />
Shoe Rail<br />
with Fillet<br />
C-5060<br />
1 1/4” S4S<br />
C-5360<br />
1 3/4” S4S<br />
C-6700 P1<br />
with Fillet<br />
C-6002<br />
Shoe Rail<br />
with Fillet<br />
C-5060 EE<br />
1 1/4” Sq.<br />
C-5360 EE<br />
1 3/4” Sq.<br />
Top View showing<br />
Eased Edge<br />
C-5060 EE<br />
1 1/4” Sq.<br />
C-5360 EE<br />
1 3/4” Sq.
C-7023<br />
Quarterturn<br />
C-6040 C-6040<br />
C-7024<br />
Starting Easing<br />
C-3621<br />
Premium Handrail Bracket<br />
Wall-to-Center – 2-3/8”<br />
Available Finishes<br />
C-3621PB Polished Brass 573003<br />
C-3621AB Antique Brass 573009<br />
C-3621BN Brushed Nickel 573007<br />
C-3621CHR Chrome 573006<br />
C-3621BC Brushed Chrome 573010<br />
C-3621B Textured Black 573008<br />
C-3621SB Satin Black 573021<br />
C-3621ORB Oil Rubbed Bronze 573015<br />
C-7217<br />
Rosette<br />
C-3631<br />
Standard Wall Rail Bracket<br />
Wall-to-Center – 2-3/4”<br />
Available Finishes<br />
C-3631PB Polished Brass 573002<br />
C-3631BN Brushed Nickel 573039<br />
C-3631CHR Chrome 573020<br />
C-3631FB Flat Black 573022<br />
C-3631SB Satin Black 573023<br />
C-3631ORB Oil Rubbed Bronze 573105<br />
C-7317<br />
Rosette<br />
Wall Rails, Brackets, Rosettes<br />
C-7025<br />
Over Easing<br />
Wall Rails<br />
Wall Rail Brackets<br />
C-3622<br />
Premium Handrail Bracket<br />
Wall-to-Center – 3-3/8”<br />
Available Finishes<br />
C-3622PB Polished Brass 573014 C-<br />
3622BN Brushed Nickel 573024<br />
C-3622ORB Oil Rubbed Bronze 573025<br />
Rail brackets are shipped with<br />
all installation hardware.<br />
Rosettes<br />
C-7237<br />
Rosette<br />
25<br />
C-6042 C-6042<br />
C-7005<br />
Quarterturn<br />
C-3632<br />
Long Arm Standard<br />
Wall Rail Bracket<br />
Wall-to-Center – 3-1/2”<br />
Available Finishes<br />
C-3632 PB Polished Brass 573038<br />
C-3632 BN Brushed Nickel 573138<br />
C-3632 ORB Oil Rubbed Bronze 573135<br />
Use with Iron Collection<br />
C-3611<br />
Iron Handrail Bracket<br />
Wall-to-Center – 3-1/4”<br />
Available Finishes<br />
C-3611BLK Flat Black 573013<br />
C-3611SAT Satin Black 573016<br />
C-3611PC Gray/Black 573012<br />
C-3611ABZ Antique Bronze 573011<br />
C-3611ORB Oil Rubbed Bronze 573019<br />
C-3611ORC Oil Rubbed Copper 573018<br />
C-3611AN Antique Nickel 573017<br />
C-7337<br />
Rosette<br />
C-7318<br />
Rosette<br />
ACCESSORIES
ACCESSORIES<br />
Fittings Traditional / Classic<br />
Traditional<br />
C-6010<br />
Classic<br />
C-6210<br />
C-7016<br />
C-7216<br />
Over Easing<br />
Returned End<br />
C-7001<br />
Rail Drop<br />
C-7031<br />
Vertical Volute<br />
C-7010<br />
C-7210<br />
Starting Easing<br />
With Cap<br />
C-7018<br />
Newel Cap<br />
C-7007<br />
C-7207<br />
Coped End<br />
Starting Fittings<br />
4 7/8” Center<br />
of Rail to Center<br />
of Newel Cap<br />
C-7030<br />
C-7230<br />
Left Hand<br />
Volute<br />
4 7/8” Center<br />
of Rail to Center<br />
of Newel Cap<br />
C-7040<br />
C-7240<br />
Left Hand<br />
Turnout<br />
C-7009<br />
C-7209<br />
Returned End<br />
C-7019<br />
C-7219<br />
Opening Cap<br />
C-7035<br />
C-7235<br />
Right Hand<br />
Volute<br />
C-7045<br />
C-7245<br />
Right Hand<br />
Turnout<br />
C-7020<br />
C-7220<br />
Tandem Cap<br />
Transition Fittings<br />
C-7011<br />
C-7211<br />
Level Quarterturn<br />
90º<br />
Gooseneck Fittings<br />
26<br />
C-7033<br />
C-7233<br />
Left Hand<br />
Volute Ascending<br />
C-7041<br />
C-7241<br />
Left Hand<br />
Turnout<br />
C-7021<br />
C-7221<br />
Quarterturn<br />
Cap 90º<br />
5 1/4” Center<br />
of Rail to Center<br />
of Newel Cap<br />
2 7/8” Center<br />
of Rail to Center<br />
of Newel Cap<br />
C-7012S<br />
C-7212S<br />
Up Easing<br />
C-7038<br />
C-7238<br />
Right Hand<br />
Volute Ascending<br />
C-7046<br />
C-7246<br />
Right Hand<br />
Turnout<br />
C-7013<br />
C-7213<br />
Over Easing<br />
C-7022<br />
C-7222<br />
Level Cap 45º<br />
C-7014S<br />
C-7214S<br />
Up Easing 90º<br />
Traditional / Classic<br />
The second digit of the Fitting<br />
part number identifies the<br />
profile and must match<br />
the second digit of the Rail<br />
number.<br />
Example:<br />
C-70XX Fittings = C-6010 Rail<br />
C-72XX Fittings = C-6210 Rail<br />
C-7026<br />
C-7226<br />
Level Turn 45º<br />
C-7015<br />
C-7215<br />
Starting Easing<br />
Returned End<br />
C-7047<br />
C-7247<br />
5” Center to Center Left<br />
or Right (LH shown)<br />
C-7050 C-7055<br />
C-7060 C-7065<br />
C-7061 C-7066<br />
C-7071 C-7076<br />
C-7081 C-7086<br />
C-7250 C-7255<br />
C-7260 C-7265<br />
C-7261 C-7266<br />
C-7271 C-7276<br />
C-7281 C-7286<br />
Left Hand Right Hand Left Hand Right Hand Left Hand Right Hand Left Hand Right Hand Left Hand Right Hand<br />
2 Riser No Cap 90º 2 Riser With Cap 90º 2 Riser With Cap 45º 2 Riser No Cap 90º 2 Riser With Cap 90º<br />
5 1/2” Center of rail to Center of Rail<br />
C-7091<br />
C-7291<br />
Left Hand<br />
C-7094<br />
C-7294<br />
Right Hand<br />
2 Riser Landing Return<br />
No Cap 180º<br />
C-7089<br />
C-7289<br />
2 Riser with<br />
Tandem Cap<br />
C-7097<br />
C-7297<br />
2 Riser with Cap<br />
C-7098<br />
C-7298<br />
1 Riser No Cap<br />
C-7099<br />
C-7299<br />
2 Riser No Cap
C-7109<br />
C-7709<br />
Returned<br />
End<br />
C-7110 / C-7410<br />
C-7710<br />
Starting Easing<br />
with Newel Cap<br />
C-7160<br />
C-7460<br />
C-7760<br />
Left Hand<br />
C-7111<br />
C-7411<br />
C-7711<br />
Level<br />
Quarterturn<br />
90º<br />
C-7140 / C-7440<br />
C-7740<br />
Left Hand<br />
Turnout<br />
C-7165<br />
C-7465<br />
C-7765<br />
Right Hand<br />
C-7112S<br />
C-7412S<br />
C-7712S<br />
Up Easing<br />
C-7130 / C-7430<br />
C-7730<br />
Left Hand Volute<br />
4 7/8” Center<br />
of Rail to Center<br />
of Newel Cap<br />
5” Center<br />
of Rail to Center<br />
of Newel Cap<br />
C-7145 / C-7445<br />
C-7745<br />
Right Hand<br />
Turnout<br />
C-7113<br />
C-7413<br />
C-7713<br />
Over<br />
Easing<br />
C-7171<br />
C-7471<br />
C-7771<br />
Left Hand<br />
C-7135 / C-7435<br />
C-7735<br />
Right Hand Volute<br />
C-7114S<br />
C-7414S<br />
C-7714S<br />
Up Easing<br />
90º<br />
C-7176<br />
C-7476<br />
C-7776<br />
Right Hand<br />
2 Riser With Cap 90º 2 Riser No Cap 90º<br />
Art Deco<br />
C-6810<br />
C-7811<br />
Level Quarterturn<br />
90º<br />
C-7812S<br />
Up Easing<br />
C-7819<br />
Opening Cap<br />
C-7810<br />
Starting Easing<br />
C-7831<br />
Vertical Volute<br />
Fittings Bristol / Richmond / Marion<br />
Starting Fittings<br />
Transition Fittings<br />
C-7119<br />
C-7419<br />
C-7719<br />
Opening<br />
Cap<br />
Gooseneck Fittings<br />
C-7181<br />
C-7481<br />
C-7781<br />
Left Hand<br />
Art Deco<br />
4 7/8” Center<br />
of Rail to Center<br />
of Newel Cap<br />
C-7840<br />
Left Hand<br />
Turnout<br />
27<br />
C-7120<br />
C-7420<br />
C-7720<br />
Tandem<br />
Cap<br />
C-7186<br />
C-7486<br />
C-7786<br />
Right Hand<br />
2 Riser With Cap 90º<br />
C-7845<br />
Right Hand<br />
Turnout<br />
Bristol Richmond Marion<br />
C-6110 C-6410 C-6719<br />
Bristol / Richmond / Marion<br />
The second digit of the Fitting part number<br />
identifies the profile and must match the second<br />
digit of the Rail part number.<br />
Example:<br />
C-71XX Fittings = C-6110 Rail<br />
C-74XX Fittings = C-6410 Rail<br />
C-77XX Fittings = C-6719 Rail<br />
C-7121<br />
C-7421<br />
C-7721<br />
Quarterturn<br />
Cap<br />
90º<br />
C-7122<br />
C-7422<br />
C-7722<br />
Level Cap<br />
45º<br />
C-7189<br />
C-7489<br />
C-7789<br />
2 Riser With<br />
Tandem Cap<br />
C-7126<br />
C-7426<br />
C-7726<br />
Level<br />
Turn 45º<br />
C-7197<br />
C-7497<br />
C-7797<br />
2 Riser With<br />
Cap<br />
C-7147<br />
C-7447<br />
C-7747<br />
5” Center to Center<br />
Left or Right<br />
(LH shown)<br />
C-7199<br />
C-7499<br />
C-7799<br />
2 Riser No<br />
Cap<br />
C-7850 C-7855 C-7871 C-7876<br />
Left Hand Right Hand Left Hand Right Hand<br />
2 Riser No Cap 90º 2 Riser No Cap 90º<br />
NOTE: The contemporary styling of Art Deco is achieved by using fittings<br />
designed without caps. Placement of Art Deco newels on intermediate<br />
landings and balconies will differ from standard newel locations.<br />
C-7899<br />
2 Riser No<br />
Cap<br />
ACCESSORIES
ACCESSORIES<br />
Starting Steps<br />
28<br />
C-8010 C-8010<br />
Bullnose<br />
C-8015<br />
C-8016<br />
Adjustable Double End Bullnose<br />
C-8030<br />
C-8050<br />
Starting Step Moulding Sets<br />
Starting steps are shipped complete with the starting riser, starting tread,<br />
and all cove and shoe moulding.<br />
Usable with all turnouts and volutes.<br />
Usable with all turnouts and<br />
volutes. Three adjustable sizes<br />
allow job site trimming for exact<br />
finished fit.<br />
C-8030<br />
Half Circle<br />
Use with Ascending Volutes, and<br />
usable with larger profile Volutes,<br />
PTP systems and Box Newels.<br />
C-8010COVE<br />
Complete Set C-8010 Cove Moulding (60”)<br />
C-8095 Profile<br />
C-8010SHOE<br />
Complete Set C-8010 Shoe Moulding (60”)<br />
C-8085 Profile<br />
C-8015COVE<br />
Complete Set C-8015 Cove Moulding (60”)<br />
C-8095 Profile<br />
C-8015SHOE<br />
Complete Set C-8015 Shoe Moulding (60”)<br />
C-8085 Profile
The products in<br />
this section are<br />
manufactured under<br />
highly controlled<br />
standards for beauty<br />
that will last a lifetime.<br />
All are manufactured<br />
without the use of<br />
finger-joints, excluding<br />
landing tread (which<br />
may contain a single<br />
finger-joint in 14’ and<br />
16’) and skirtboard.<br />
C-8028<br />
C-8028V (Veneered)<br />
Tread Bracket<br />
1/4” Thick<br />
C-8029<br />
C-8029V (Veneered)<br />
Tread Bracket<br />
1/4” Thick<br />
C-8085<br />
Shoe Mould<br />
1/2” x 3/4”<br />
C-8071<br />
5-1/4” x 12”<br />
Tread Cap with<br />
Mitered Return Nosing<br />
and Cove Left or Right<br />
(RH shown)<br />
C-8095<br />
Cove Mould<br />
13/16” x 5/8”<br />
C-8070<br />
Tread Blanks<br />
S4S - Size Varies<br />
8070 MR<br />
C-8070<br />
Coped Return Tread<br />
Tread<br />
1-1/32” x 10-1/2” and 11-1/2”<br />
No Return<br />
1-1/32” x 10-1/2”, 11-1/2” and 13”<br />
C-8070<br />
Tread Blanks<br />
Nosed 2 Sides - Size Varies<br />
C-6973<br />
Skirtboard<br />
1” x 8” (Actual 11/16” x 7 1/4”)<br />
C-8080-13<br />
13” Return Nosing<br />
1-1/4” x 1-1/32”<br />
C-8072<br />
5-1/4” x 12”<br />
Tread Cap with<br />
Nosing and Cove<br />
C-6975<br />
Skirtboard<br />
1” x 12” (Actual 11/16” x 11 1/4”)<br />
C-8080-12 MR<br />
C-8080-13 MR<br />
Coped Return Nosing<br />
1-1/4” x 1-1/32” x 11-3/4”<br />
and 12-3/4”<br />
Tread and Riser Caps<br />
C-8076<br />
5-1/4” x 8” Riser Cap<br />
C-8075<br />
Riser<br />
3/4” x 7-1/2” and 8”<br />
29<br />
C-8011<br />
Reversible Starting<br />
End Cap. Includes<br />
Cove and Shoe<br />
Mldgs.<br />
Treads and Risers<br />
C-8070 Hybrid<br />
Reversible (Oak Reveal) Tread<br />
1-1/32” x 11-1/2”<br />
C-8080<br />
Nosing<br />
1-1/4” x 1-1/32”<br />
and 3/4”<br />
Lineal Stock<br />
C-8090 / C-8590 / C-8690<br />
Landing Tread<br />
C-8090 3-1/2” Wide<br />
C-8590 5-1/4” Wide<br />
C-8690 6-1/2” Wide<br />
Landing Tread<br />
BENDING LANDING TREAD<br />
C-8596 – 5-1/4” 20 Piece<br />
C-8696 – 6-1/2” 26 Piece<br />
C-8081<br />
Nosing and Cove<br />
1-1/4” x 1-27/32”<br />
Lineal Stock<br />
C-8010-2<br />
Reversible Starting<br />
End Cap (No Notch).<br />
Moulding Not Included.<br />
C-8079<br />
Reversible False<br />
Tread / Riser (oak)<br />
ACCESSORIES
ACCESSORIES<br />
Hardware and Accessories<br />
C-3010<br />
Flush Rail Plug<br />
1/2” Diameter<br />
C-3301<br />
Rail & Post Fastener<br />
Includes Fastener,<br />
Washer, Nut and Plugs<br />
C-3201<br />
Baluster Fastener<br />
Drill Driver Kit<br />
Includes — 4 Baluster Fasteners<br />
C-3008<br />
Sure Tite<br />
Newel Fastening<br />
System Includes -<br />
Lag Bolt, Washer,<br />
Nut and 1-1/2”<br />
Plugs<br />
C-3015<br />
Button Plug<br />
1/2” Diameter<br />
C-3901<br />
Rail Bolt Wrench<br />
C-3000<br />
Flush Rail Plug<br />
1” Diameter<br />
C-3505-30 - 3”<br />
C-3505-35 - 3-1/2”<br />
L-Bracket Post Fastener<br />
C-3020<br />
Button Plug<br />
1” Diameter<br />
30<br />
C-3302<br />
Rail & Post Fastener<br />
Includes Fastener,<br />
Washer, Nut and Plugs<br />
C-3203 - 50 Pack<br />
C-3203 B - 100 Bulk Pack<br />
2-1/2” Baluster Fasteners<br />
400476<br />
C-3501 Molding Kit (oak)<br />
C-3284<br />
Thread Lock<br />
C-3001<br />
3-1/2” Rail Bolt<br />
C-3009<br />
Newel Anchoring<br />
Hardware<br />
C-3283<br />
Key Lock<br />
2” x 2 5/8” x 3/8”<br />
C-3501<br />
Newel Plate Fastener<br />
4-5/8” x 4-5/8”. Includes<br />
Plate and 13, 3”<br />
Fastening Screws<br />
C-3520-30 - 3”<br />
C-3520-325 - 3-1/4”<br />
C-3520-35 - 3-1/2”<br />
Post Mounting System<br />
C-3520TRIM<br />
2’-0” Piece Colonial 4J Molding<br />
C-3032<br />
Rail Bolt Driver<br />
EZM-01<br />
EZ mount for C-4091<br />
C-3099<br />
Miter Jig<br />
RP-100<br />
Removable<br />
Pin<br />
(LB Balusters)
31<br />
Stair Anatomy
Ordering Specifications for Newels<br />
NEWELS<br />
Newels serve as the main structural support of the balustrade portion of the stair. Proper<br />
placement, coupled with proper installation techniques, is critical to a structurally sound and code<br />
compliant staircase. Newels should be placed at the top and bottom of every stair, at all directional<br />
changes, and at intervals of not more than 8' on level balcony runs.<br />
BALCONY INTERMEDIATE NEWELS<br />
Balcony<br />
intermediate<br />
newels will<br />
have level<br />
Check local building codes for required height and baluster spacing.<br />
PTP newels are designed with<br />
upper (top) square blocks that<br />
will receive the handrail.<br />
Standard block sizes (5", 10" and<br />
13") are provided for use at<br />
various locations of the stair.<br />
INTERMEDIATE LANDING NEWELS<br />
Intermediate landing newels will have<br />
angled rail entering and exiting the upper<br />
square block from adjacent sides.<br />
Because the newel is basically making up<br />
for two rise dimensions in the stair (the<br />
last rise before the intermediate landing<br />
as well as the first<br />
rise of the second<br />
straight run), a<br />
longer square<br />
block is necessary to keep<br />
consistent rake rail heights<br />
LANDING<br />
from the first run to the second. A newel<br />
with a minimum 13" top block will be<br />
required.<br />
rail entering and exiting the upper block<br />
of the newel. A 5" top block is<br />
recommended.<br />
POST-TO-POST NEWELS<br />
BALCONY<br />
32<br />
LANDING<br />
UP<br />
INTERMEDIATE<br />
LANDING NEWEL<br />
BALCONY<br />
LANDING NEWEL<br />
STARTING<br />
NEWEL<br />
INTERMEDIATE<br />
BALCONY NEWEL<br />
STARTING NEWELS<br />
A 5" top block will always work<br />
at the beginning of the stair.<br />
Larger top blocks are<br />
unnecessary<br />
and can<br />
appear topheavy.<br />
BALCONY<br />
BALCONY LANDING NEWELS<br />
Balcony newels will have angled<br />
rail entering from the lower side<br />
of the newel with level rail exiting<br />
from the top<br />
of the upper<br />
BALCONY<br />
block.<br />
Because<br />
only one rise dimension is<br />
involved, a 10" top block will<br />
normally be required.<br />
USE OF FITTINGS<br />
WITH PTP NEWELS<br />
The use of easings<br />
and goosenecks in<br />
PTP systems make<br />
the need for longer<br />
square blocks<br />
unnecessary. Order a<br />
5" top block newel at<br />
all locations.<br />
BALCONY
10"<br />
All Over-the-Post newels are<br />
manufactured with a 3/4"<br />
diameter pin turned into the<br />
top of the newel that will be<br />
installed into the underside of<br />
the fittings used in the rail<br />
system.<br />
OTP newels are manufactured<br />
in both doweled bottom and<br />
square bottom designs.<br />
Doweled bottom newels have<br />
a 1-1/2" diameter dowel<br />
designed into the bottom of<br />
the newel that is used to<br />
install the starting newel into<br />
a starting step. The height of<br />
these newels cannot be<br />
adjusted, making correct<br />
specification critical in<br />
achieving desired rake rail<br />
height.<br />
ADJUSTABLE NEWELS<br />
An option available in all <strong>WM</strong><br />
<strong>Coffman</strong> families to the fixed<br />
length doweled newels is the<br />
adjustable newel. These<br />
newels have a 1-1/2” diameter<br />
by 10” deep hole bored into the<br />
bottom of the newel and are<br />
shipped with a loose 19” dowel<br />
in the carton. These newels<br />
allow the installer to trim the<br />
newel (up to 4”) to achieve<br />
exact rake rail<br />
heights over<br />
a wide variety<br />
of applications.<br />
4"<br />
Range<br />
of Cut<br />
Ordering Specifications for Newels<br />
Check local building codes for required height and baluster spacing.<br />
OVER-THE-POST NEWELS<br />
Recommended heights for the following newel placements are based on a 34" rake rail<br />
height, a 7-1/2" rise, a 10" run, and a 1-1/4" tread overhang and are dependent on the location<br />
of the newel matching the standard location listed with the application. Variances of up to 3/4"<br />
can be expected in certain conditions and should be accounted for when trying to achieve<br />
minimum code heights.<br />
OTP STARTING NEWEL HEIGHTS (For 34" Rake Rail Height)<br />
STARTING TURNOUT VOLUTE ASCENDING VERTICAL<br />
EASING VOLUTE VOLUTE<br />
Net Measurement Net Measurement Net Measurement Net Measurement Measurement<br />
36-1/2" 40-1/2" 39" 36" 33-7/8"<br />
NET<br />
MEASUREMENT<br />
NEWEL<br />
CENTERED<br />
ON RISER<br />
NOTE: Rake rail height requirements other than 34" can be adjusted on<br />
a 1:1 basis. Example: For a 36" rake rail height, add 2" to the base<br />
number. For a 30" rake rail height, subtract 4". Check local building<br />
codes.<br />
NOTE: 1" movement in the newel from standard placement will change<br />
the rail height by approximately 3/4". Moving newel placement away<br />
from the second riser raises the rail height and moving it closer to the<br />
second riser will lower the rail height.<br />
33<br />
NET<br />
MEASUREMENT<br />
PLACEMENT<br />
DICTATED BY<br />
TEMPLATE<br />
MEASUREMENT:<br />
TOP OF TREAD TO<br />
TOP OF NEWEL<br />
NEWEL<br />
CENTERED<br />
ON RISER
Ordering Specifications for Balusters<br />
All balusters fall into one of the following categories:<br />
PIN TOP - Pin top balusters have turned, round tops that will<br />
be inserted into holes drilled into unplowed handrail.<br />
SQUARE TOP - Square top balusters have a turned portion,<br />
leaving a square upper and lower portion. Installation of<br />
square top balusters will require a plowed handrail.<br />
FORGED IRON PIN TOP - Forged baluster pin tops are 1/2"<br />
diameter.<br />
The stair’s rake and balcony rail height, along with code considerations on<br />
baluster spacing, will determine the length and quantity of balusters required on<br />
any given job. The tables below list the quantity and length of the balusters<br />
necessary for each rake application for a 34" rake rail height.<br />
BALUSTER QUANTITY AND LENGTH (For 34" Rake Rail Height)<br />
STARTING EASING TURNOUT VOLUTE ASCENDING VOLUTE VERTICAL VOLUTE<br />
BALUSTERS UNDER STARTING FITTINGS<br />
QUANTITY – 1<br />
QUANTITY – 2<br />
C-7?40, C-7?45<br />
QUANTITY – 6<br />
1-1/4" SQUARE<br />
QUANTITY – 6<br />
1-1/4" SQUARE<br />
QUANTITY – 1<br />
LENGTH 39"<br />
QUANTITY – 1<br />
C-7?41, C-7?46<br />
LENGTH 43"<br />
QUANTITY – 5<br />
1-3/4" SQUARE<br />
LENGTH 41"<br />
BALUSTERS ON TREADS<br />
QUANTITY – 5<br />
1-3/4" SQUARE<br />
LENGTH 39"<br />
LENGTH 39"<br />
FRONT BALUSTER – 36" SECOND BALUSTER – 39" THIRD BALUSTER (optional) – 41"<br />
Adjustments to rake rail heights from 34" can be accommodated on a 1:1 basis.<br />
Examples: For a 36" rail height, simply add 2" to the given length and order the<br />
nearest baluster length (rounding up if necessary). For a 30" rake rail height,<br />
subtract 4" from the given length and order the nearest baluster length (rounding<br />
up if necessary).<br />
NOTE: 44" balusters are available in all square bottom profiles.<br />
Check local building codes for required height and baluster spacing.<br />
PIN TOP<br />
SQUARE TOP<br />
34<br />
Baluster length<br />
requirements for the<br />
balcony will match the<br />
balcony rail height. If an<br />
exact baluster length is not<br />
available, simply round up<br />
to the next available<br />
length. (Example: For a 38"<br />
balcony rail height, order a<br />
39" baluster.)<br />
1-1/4" BALUSTER SQUARE 1-3/4" BALUSTER SQUARE<br />
4-1/2"<br />
All baluster pins are 3/4" long by 3/4"<br />
diameter and are turned with chamfered<br />
bottoms and a centered glue ring.<br />
Exception: 5015H, 5610H pins are 5/8" long by<br />
5/8" diameter.<br />
Top diameter on the pin top balusters will<br />
vary according to baluster size.<br />
1-1/4" Baluster - 5/8" diameter<br />
1-5/8" Baluster - 5/8" diameter<br />
1-3/4" Baluster - 3/4" diameter<br />
(except C-5611 which is 5/8")<br />
1-9/16" Baluster - 3/4" diameter<br />
Forged - 1/2" diameter<br />
All pin top balusters have a<br />
guaranteed 3" minimum top<br />
straight portion for trimming<br />
and insertion.<br />
CUT-AWAY<br />
VIEW OF RAIL<br />
BALCONY BALUSTER LENGTH<br />
BALCONY BALUSTER QUANTITY<br />
4-5/8"<br />
BALCONY BALUSTER<br />
LENGTH = BALCONY<br />
RAIL HEIGHT<br />
Exception: For 1-3/4" Pin Top Baluster<br />
with 5/8" diameter tops (i.e. C-5611) use:<br />
4-1/2"<br />
MAXIMUM CENTER-TO-CENTER SPACING<br />
(Under 4" Sphere Rule)<br />
Spacing codes vary but generally fall under the 4"<br />
sphere rule. The dimensions listed are recommended<br />
center-to-center spacing measurements that will<br />
safely comply with this code.<br />
To obtain the quantity of balusters for individual balcony<br />
runs, divide the length of the balcony run by the<br />
corresponding center-to-center spacing and round down.
RAIL AND LINEAL BALUSTRADE COMPONENTS<br />
Rail and lineal balustrade components, like other lineal products, are<br />
offered in even lengths from 4' to 16'. For rake portions of the stair,<br />
measure along the slope of the stair or use the lineal formula:<br />
Number of Treads x 13" (rounded up to the nearest even length).<br />
SQUARE<br />
TOP<br />
BALUSTER<br />
PLOWED RAIL is moulded<br />
with a recessed bottom<br />
for insertion of square<br />
top balusters.<br />
UNPLOWED RAIL has a<br />
flat bottom that will be<br />
drilled for the insertion of<br />
pin top blausters.<br />
Ordering Specifications for Rails<br />
PIN TOP<br />
BALUSTER<br />
LINEAL RAIL COMPONENTS consist of sub rail, shoe rail, and<br />
fillet. Shoe rail is a plowed moulding designed to accept the<br />
bottom of the baluster. Sub rail is used under unplowed handrail<br />
with square top balusters in Post-to-Post systems to provide a<br />
more substantial look to the balustrade. Fillet is a finished<br />
moulding that will be installed between the balusters in plowed<br />
rail, shoe rail and sub rail.<br />
PLOWED RAIL<br />
SUB RAIL<br />
FILLET<br />
Check local building codes for required height and baluster spacing.<br />
SUB RAIL SHOE RAIL<br />
SHOE RAIL<br />
FILLET<br />
35<br />
BENDING RAIL BALUSTRADE COMPONENTS<br />
BENDING RAIL<br />
BENDING RAIL<br />
MINIMUM<br />
RADIUS<br />
BENDING<br />
MOULD<br />
The key components of curved rail construction are bending rails<br />
and bending moulds. Bending rail is most easily understood when<br />
imagining a standard rail profile cut into thin, vertical strips.<br />
Bending mould is a form, moulded to the outside profile of the<br />
handrail, that is used to cradle the bending rail as it is being<br />
shaped to the stair.<br />
Each ply comprising the bending rail is designed and<br />
manufactured with a tongue and groove bead to create an<br />
alignment of the plys. When assembled,<br />
<strong>WM</strong> <strong>Coffman</strong> bending rail results in a<br />
match of the standard rail profile.<br />
The minimum radius achievable with each rail profile will<br />
depend on several factors. These factors include such<br />
variables as the thickness of each ply, the overall<br />
thickness of the handrail, the height of the handrail, the<br />
angle of the stair, and whether the rail is bent on the<br />
rake or on the level portion of the stair. The minimum<br />
recommended radius for use on both rake and level<br />
applications are listed in the chart for each <strong>Coffman</strong><br />
bending rail profile.<br />
RAIL ITEM RAKE RAIL BALCONY RAIL<br />
TRADITIONAL C-6016 42" 48"<br />
BRISTOL C-6116 48" 54"<br />
CLASSIC C-6216 48" 54"<br />
RICHMOND C-6416 48" 54"<br />
MARION C-6716 48" 54"<br />
CHIPPENDALE C-6716 48” 54”
Ordering Specifications for Fittings<br />
FITTINGS<br />
Fittings, components used within rail systems, can be<br />
incorporated into both PTP and OTP stairs. In OTP rail systems,<br />
fittings are required to start the rail system, to make<br />
directional and height transitions, to carry the rail over<br />
intermediate balcony newels, and to terminate the rail when<br />
using a half newel. A good check of any Over-the-Post parts<br />
list is to make certain that a fitting is ordered for each newel,<br />
including half newels, in the stair. NOTE: <strong>WM</strong> <strong>Coffman</strong> fittings<br />
are shipped with all necessary rail bolts, 1" tapered rail plugs,<br />
templates, and full instructions to provide a quick, accurate,<br />
and professional installation.<br />
FITTING DEFINITIONS<br />
FITTING ORIENTATION<br />
Fitting orientation is<br />
determined from the<br />
bottom of the stair looking<br />
up. All fittings in the photo<br />
to the right are right-hand.<br />
GOOSENECK FITTINGS<br />
Gooseneck fittings are used to<br />
accommodate transitions in<br />
height and/or direction at<br />
intermediate and balcony<br />
landings.<br />
NOTE: It is recommended that a<br />
minimum difference of 4"<br />
between rake rail height and<br />
balcony rail height be kept on all<br />
Over-the-Post systems.<br />
GOOSENECK<br />
FITTING<br />
Check local building codes for required height and baluster spacing.<br />
ONE-RISE GOOSENECK<br />
DESIGNED FOR A 4" DIFFERENCE<br />
IN RAKE TO BALCONY HEIGHT<br />
BALCONY<br />
RAIL HEIGHT<br />
EX. 38"<br />
ONE-RISE<br />
GOOSENECK<br />
RAKE<br />
RAIL HEIGHT<br />
EX. 34"<br />
36<br />
CAP VS. NO CAP<br />
All fittings fall into two<br />
categories: (1) those designed<br />
and manufactured with a cap<br />
and (2) those manufactured<br />
without a cap.<br />
All fittings with caps have a 3/4"<br />
diameter hole bored in the<br />
under side of the cap to receive<br />
the top pin of the Over-the-<br />
Post newel. Fittings without<br />
caps are designed to carry the<br />
baluster line through a<br />
transition without the use of a<br />
newel. Capped fittings are<br />
clearly identified in both the<br />
drawings and product<br />
descriptions.<br />
CAP<br />
ONE-RISE VS. TWO-RISE<br />
Most goosenecks are offered in both onerise<br />
and two-rise versions. The one-rise<br />
gooseneck is manufactured with the<br />
lower easing attached and is limited to<br />
use on stairs where the difference in rake<br />
rail height to balcony rail height is 4"<br />
(Example: 34" rake rail height to 38"<br />
balcony rail height). The corresponding<br />
two-rise gooseneck makes the same<br />
height and/or directional change as its<br />
one-rise counterpart but is shipped with<br />
the lower easing unattached. This<br />
versatile two-piece design allows the<br />
installer to trim or extend the straight<br />
section of the gooseneck to a height that<br />
will work in any situation. Two-rise<br />
goosenecks work in applications where<br />
the difference in rake rail height is less<br />
than 4" (Example: 34-1/2" to 38"), greater<br />
than 4" (Example: 34" to 42"), or unknown<br />
at the time of ordering.<br />
NO CAP<br />
ONE-RISE<br />
GOOSENECK<br />
FITTINGS<br />
TWO-RISE GOOSENECK<br />
TWO-RISE
NEWEL<br />
NO<br />
NEWEL<br />
2nd FLOOR<br />
PLATFORM<br />
C-7281<br />
C-7081<br />
Left Hand<br />
C-7050 C-7055<br />
Left Hand Right Hand<br />
2 Riser No Cap<br />
With Cap<br />
C-7286<br />
C-7086<br />
Right Hand<br />
SPECIALTY FITTINGS<br />
OVER EASING<br />
An over easing is<br />
designed to carry<br />
the rail system<br />
from the rake<br />
(angled) portion<br />
of the stair to the<br />
2nd FLOOR<br />
PLATFORM<br />
NO<br />
NEWEL<br />
level, balcony portion without the use of a<br />
gooseneck. This elegant, flowing look is<br />
achieved by combining the over easing<br />
with a transitional fitting such as a<br />
tandem cap.<br />
90° UP EASING<br />
90° up easings are used to make a<br />
horizontal to vertical 90° transition in a<br />
rail system.<br />
S-SERIES FITTINGS<br />
<strong>WM</strong> <strong>Coffman</strong>’s<br />
S-Series fittings<br />
accommodate the<br />
continuous rail codes<br />
on partial-open<br />
stairs. Specify Right-<br />
Hand or Left-Hand<br />
(from the bottom of<br />
the stair looking up).<br />
C-7013<br />
OVER EASING<br />
C-7089 (LOWER EASING DISCARDED)<br />
NEWEL<br />
Ordering Specifications for Fittings<br />
SUGGESTED GOOSENECKS FOR SOME COMMON APPLICATIONS<br />
C-7020 TANDEM CAP<br />
C-7014S<br />
90° UP EASING<br />
C-7047<br />
LEFT-HAND<br />
S-FITTING<br />
Check local building codes for required height and baluster spacing.<br />
NEWEL<br />
5 1/2" Center of Rail<br />
to Center of Rail<br />
PLATFORM<br />
2nd FLOOR2nd FLOOR<br />
WELLHOLE 5 1/2"<br />
WELLHOLE 5 1/2"<br />
C-7291<br />
C-7091<br />
Left Hand<br />
C-7294<br />
C-7094<br />
Right Hand<br />
Landing Return<br />
C-7060 C-7065<br />
Left Hand Right Hand<br />
2 Riser With Cap<br />
C-7019 OPENING CAP C-7007 COPED END<br />
37<br />
PLATFORM<br />
NEWEL<br />
NO<br />
NEWEL<br />
NEWEL NEWEL<br />
C-7297<br />
C-7097<br />
With Cap<br />
RAIL PROFILE<br />
COPED (SHAPED)<br />
INTO END OF<br />
FITTING<br />
COPED ENDS<br />
Some <strong>WM</strong> <strong>Coffman</strong> families contain a<br />
Coped End which is a fitting that has the<br />
profile of the rail shaped, or coped, into<br />
one end of a straight piece of rail. This<br />
fitting is used in conjunction with an<br />
opening cap (Example C-7019) or a<br />
gooseneck incorporating an opening cap<br />
(Example C-7097), to accomodate<br />
nonstandard angle changes.<br />
C-7086 TWO-RISE GOOSENECK WITH CAP<br />
C-7011 LEVEL<br />
QUARTERTURN NO CAP<br />
COMBINING FITTINGS<br />
Standard fittings will sometimes have to<br />
be site-assembled to complete a height<br />
and/or directional transition. Basically all<br />
stair applications can be satisfied using a<br />
combination of currently available <strong>WM</strong><br />
<strong>Coffman</strong> fittings.<br />
In the example shown of a 180° turn<br />
at balcony, you will need a two-rise<br />
gooseneck with cap that turns right 90°<br />
to sit on top of the newel along with a<br />
level quarterturn without a cap to<br />
complete the 180° turn.<br />
2nd FLOOR<br />
C-7289<br />
C-7089<br />
With<br />
Tandem Cap<br />
C-7271<br />
C-7071<br />
Left Hand<br />
No Cap<br />
C-7276<br />
C-7076<br />
Right Hand<br />
2nd FLOOR<br />
NO<br />
NEWEL<br />
SQUARE TOP<br />
NEWEL<br />
STANDARD VOLUTE<br />
(C-7035) FOR 34"<br />
RAKE RAIL HEIGHT<br />
C-7299<br />
C-7099<br />
No Cap<br />
ASCENDING VOLUTE<br />
C-7033 FOR SAME 34"<br />
RAKE RAIL HEIGHT<br />
ASCENDING VOLUTES<br />
<strong>WM</strong> <strong>Coffman</strong>’s ascending volutes<br />
(C-7X33, C-7X38) are designed to begin<br />
their ascent much sooner than their<br />
standard counterparts, allowing for the<br />
use of a shorter newel and shorter<br />
balusters on top of the bullnose starting<br />
step. This lower, more proportional<br />
beginning of an Over-the-Post system,<br />
coupled with the graceful, flowing<br />
transition from the volute to the rail,<br />
makes the ascending volute an attractive<br />
addition to any stair.
“The Americans with Disabilities Act (ADA)” Compliant Components<br />
STARTING STEPS<br />
The following <strong>WM</strong> <strong>Coffman</strong> components are in compliance with the<br />
2010 ADA Standards for Accessible Design:<br />
Stair Component Page<br />
C-8010 ..................................................................................<br />
C-8015 ..................................................................................<br />
C-8016 ..................................................................................<br />
C-8030 ..................................................................................<br />
C-8050 ..................................................................................<br />
TREADS AND RISERS<br />
C-8070 (1- 1/32” x 11-1/2” and 13”) .....................................<br />
C-8070 MR (1-1/32” x 11-1/2”) .............................................<br />
C-8070 MR45 (3/4” x 11-1/2”) ..............................................<br />
C-8090 / C-8590 / C-8690 Landing Tread ............................<br />
C-8080 Nosing (all) ..............................................................<br />
C-8081 Nosing and Cove (all) ..............................................<br />
WALL RAILS<br />
C-6040 Hand Rail .................................................................<br />
C-6042 Hand Rail .................................................................<br />
WALL RAIL BRACKETS<br />
C-3611 ..................................................................................<br />
C-3621 ..................................................................................<br />
C-3622 ..................................................................................<br />
C-3631 ..................................................................................<br />
C-3632 ..................................................................................<br />
FITTINGS<br />
C-7005 ..................................................................................<br />
C-7023 ..................................................................................<br />
C-7024 ..................................................................................<br />
C-7025 ..................................................................................<br />
It is in your best interest to always check for updates to this material as regulations are added and modified over time.<br />
For information about the ADA, including the 2010 ADA regulations, please visit the Department’s website<br />
www.ADA.gov; or, for answers to specific questions, call the toll-free ADA Information Line at 800-514-0301<br />
38<br />
28<br />
28<br />
28<br />
28<br />
28<br />
29<br />
29<br />
29<br />
29<br />
29<br />
29<br />
25<br />
25<br />
25<br />
25<br />
25<br />
25<br />
25<br />
25<br />
25<br />
25<br />
25<br />
Shown here: C-8010<br />
Shown here: C-8090 /<br />
C-8590 / C-8690<br />
Landing Tread<br />
Shown here: C-6040<br />
Hand Rail<br />
Shown here: C-3611<br />
Shown here: C-7005
ITEM PAGE<br />
IRON COLLECTION<br />
2XXX--------------------------3-10<br />
ACCESSORIES<br />
23XX----------------------------10<br />
29XX----------------------------10<br />
3000----------------------------30<br />
3001----------------------------30<br />
3008----------------------------30<br />
3009----------------------------30<br />
3010----------------------------30<br />
3015----------------------------30<br />
3020----------------------------30<br />
3032----------------------------30<br />
3099----------------------------30<br />
3201----------------------------30<br />
3203----------------------------30<br />
3203B---------------------------30<br />
3283----------------------------30<br />
3284----------------------------30<br />
3301----------------------------30<br />
3302----------------------------30<br />
3501----------------------------30<br />
3505----------------------------30<br />
3520----------------------------30<br />
3611----------------------------25<br />
3621----------------------------25<br />
3622----------------------------25<br />
3631----------------------------25<br />
3632----------------------------25<br />
3901----------------------------30<br />
7217----------------------------25<br />
7237----------------------------25<br />
7317----------------------------25<br />
7318----------------------------25<br />
7337----------------------------25<br />
8028----------------------------29<br />
8029-------------------------21,29<br />
400476--------------------------30<br />
596000--------------------------30<br />
EZM-01-------------------------30<br />
RP-100--------------------------30<br />
NEWELS<br />
2450------------------------------9<br />
2452------------------------------9<br />
2940------------------------------9<br />
2942------------------------------9<br />
4001-------------------------17,23<br />
4002-------------------------17,23<br />
4003-------------------------17,23<br />
4003L------------------------17,23<br />
4004-------------------------17,23<br />
4004BT ----------------------17,23<br />
4005-------------------------17,23<br />
4005BT ----------------------17,23<br />
4006-------------------------17,23<br />
4007----------------------------17<br />
4008----------------------------17<br />
4009----------------------------17<br />
4010----------------------------14<br />
4011----------------------------14<br />
4014----------------------------14<br />
ITEM PAGE<br />
4015----------------------------14<br />
4017----------------------------14<br />
4019----------------------------14<br />
4030----------------------------14<br />
4035----------------------------14<br />
4038----------------------------14<br />
4039----------------------------14<br />
4040----------------------------15<br />
4040BT -------------------------15<br />
4042----------------------------15<br />
4042BT -------------------------15<br />
4045----------------------------15<br />
4045BT -------------------------15<br />
4046----------------------------15<br />
4046BT -------------------------15<br />
4046SBT ------------------------15<br />
4055----------------------------15<br />
4055BT -------------------------15<br />
4065----------------------------14<br />
4070----------------------------23<br />
4072----------------------------23<br />
4073----------------------------23<br />
4073L---------------------------23<br />
4074----------------------------24<br />
4074EE-------------------------24<br />
4075----------------------------11<br />
4076----------------------------24<br />
4076EE-------------------------24<br />
4077----------------------------12<br />
4090----------------------------12<br />
4091----------------------------11<br />
4091-KIT-------------------------9<br />
4095----------------------------12<br />
4099----------------------------13<br />
4111----------------------------18<br />
4115----------------------------18<br />
4119----------------------------18<br />
4162----------------------------18<br />
4172----------------------------18<br />
4175----------------------------18<br />
4176----------------------------18<br />
4179----------------------------18<br />
4210----------------------------16<br />
4215----------------------------16<br />
4240----------------------------17<br />
4242----------------------------17<br />
4245----------------------------17<br />
4252----------------------------20<br />
4257----------------------------19<br />
4270----------------------------20<br />
4272----------------------------19<br />
4275----------------------------20<br />
4277----------------------------19<br />
4280----------------------------20<br />
4280L---------------------------20<br />
4282----------------------------19<br />
4282L---------------------------19<br />
4285----------------------------20<br />
4287----------------------------19<br />
4291-ADJ-----------------------11<br />
4410----------------------------22<br />
4415----------------------------22<br />
4419----------------------------22<br />
4440----------------------------22<br />
4442----------------------------22<br />
4445----------------------------22<br />
39<br />
ITEM PAGE<br />
4446----------------------------22<br />
4535----------------------------14<br />
4540----------------------------15<br />
4542----------------------------15<br />
4545----------------------------15<br />
4546----------------------------15<br />
4547----------------------------15<br />
4548----------------------------15<br />
4550BT -------------------------15<br />
4555BT -------------------------15<br />
4556BT -------------------------15<br />
4662----------------------------16<br />
4690----------------------------13<br />
4691----------------------------13<br />
4695-------------------------12,22<br />
4810----------------------------21<br />
4815----------------------------21<br />
4840----------------------------21<br />
4845----------------------------21<br />
4862----------------------------21<br />
4890----------------------------13<br />
4891----------------------------13<br />
BALUSTERS<br />
24XX-----------------------------9<br />
25XX--------------------------5,6,7<br />
26XX-----------------------------9<br />
27XX----------------------------4,5<br />
28XX-----------------------------8<br />
29XX----------------------4,5,6,7,8<br />
5005----------------------------23<br />
5015----------------------------14<br />
5040----------------------------14<br />
5060----------------------------24<br />
5060EE-------------------------24<br />
5067----------------------------15<br />
5070----------------------------15<br />
5105----------------------------15<br />
5141-------------------------13,18<br />
5151-------------------------12,18<br />
5201----------------------------20<br />
5211----------------------------20<br />
5241----------------------------19<br />
5251----------------------------19<br />
5341----------------------------22<br />
5360----------------------12,23,24<br />
5360EE-------------------------24<br />
5601----------------------11,17,23<br />
5610----------------------------14<br />
5611----------------------------16<br />
5845----------------------------21<br />
RAIL, SHOE and FILLET<br />
6001----------------------------24<br />
6002----------------------------24<br />
6005P1--------------------------23<br />
6006--------17,18,19, 20, 22, 23, 25<br />
6007--------17,18,19, 20, 22, 23, 25<br />
6010----------------------14,15,26<br />
6016----------------------------14<br />
6040----------------------------25<br />
6042----------------------------25<br />
6045----------------------------15<br />
6050----------------------------15<br />
ITEM PAGE<br />
6110-------------------12,13,18, 27<br />
6116----------------------------18<br />
6210------------------11,16, 17, 26<br />
6216----------------------16,17,21<br />
6410-------------------------22,27<br />
6416----------------------------22<br />
6700-------------------------13,24<br />
6716-------------------------19,20<br />
6719----------------------19,20,27<br />
6810-------------------------21,27<br />
6816----------------------------21<br />
FITTINGS<br />
70XX-------------------------25,26<br />
71XX----------------------------27<br />
72XX----------------------------26<br />
74XX----------------------------27<br />
77XX----------------------------27<br />
78XX----------------------------27<br />
7005----------------------------25<br />
7023----------------------------25<br />
7024----------------------------25<br />
7025----------------------------25<br />
STARTING STEPS<br />
8010----------------------14,16,28<br />
8010-2--------------------------29<br />
8011----------------------------29<br />
8015----------------------------28<br />
8016----------------------------28<br />
8030----------------------------28<br />
8050----------------------------28<br />
TREADS, RISERS,<br />
and TREAD ACCESSORIES<br />
6973----------------------------29<br />
6975----------------------------29<br />
8070----------------------------29<br />
8071----------------------------29<br />
8072----------------------------29<br />
8075----------------------------29<br />
8076----------------------------29<br />
8079----------------------------29<br />
8080----------------------------29<br />
8080-13-------------------------29<br />
8080MR-------------------------29<br />
8081----------------------------29<br />
8085----------------------------29<br />
8090----------------------------29<br />
8095----------------------------29<br />
8590----------------------------29<br />
8596----------------------------29<br />
8690----------------------------29<br />
MISCELLANEOUS<br />
Index<br />
Company <strong>Policies</strong>----------------2<br />
Finishes / Species----------------3<br />
Stair Anatomy-------------------31<br />
Ordering Specifications------32-37<br />
ADA Compliant Components----38