SECTION 07115 ASPHALT MASTIC DAMPPROOFING ... - mavcon
SECTION 07115 ASPHALT MASTIC DAMPPROOFING ... - mavcon
SECTION 07115 ASPHALT MASTIC DAMPPROOFING ... - mavcon
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. Wind-Speed Warranty Period: Asphalt shingles will resist blow-off or damage caused by<br />
wind speeds up to 80 mph for 5 years from date of substantial completion.<br />
3. Algae-Discoloration Warranty Period: Asphalt shingles will not discolor 10 years from<br />
date of substantial completion.<br />
1.7 MAINTENANCE<br />
A. Extra Materials: Furnish 100 sq ft of each shingle type, in unbroken bundles, that match<br />
products installed and packaged with protective covering for storage and identified with labels<br />
describing contents.<br />
PART 2 -PRODUCTS<br />
2.1 MANUFACTURERS<br />
A. Basis of Design: Contract Documents are based on products specified below to establish a<br />
standard of quality. Other available manufacturers with products having equivalent characteristics<br />
may be considered, provided deviations are minor and does not change concept expressed<br />
in Contract Documents as judged by Architect.<br />
1. Manufacturer: Elk Corporation of Dallas, a subsidiary of GAF Materials Corp.<br />
2. Shingles: Prestique 1 High Definition.<br />
3. Hip and Ridge Shingles: Ridgecrest.<br />
4. Starter Strips: Elk Starter Strip.<br />
5. Paint: Elk Roof Accessory Paint.<br />
6. Color: As selected from manufacturers standard colors available.<br />
2.2 <strong>ASPHALT</strong> SHINGLES<br />
A. Glass-Fiber-Reinforced, Laminated-Strip Asphalt Shingles:<br />
1. Product Quality Standard: ASTM D 3462.<br />
2. Description: Laminated, multi-ply overlay construction, glass-fiber reinforced, mineralgranule<br />
surfaced, and self-sealing; granules treated to resist algae discoloration.<br />
2.3 UNDERLAYMENT MATERIALS<br />
A. Rubberized Asphalt Underlayment:<br />
1. Product Quality Standard: ASTM D 1970; except thermally stable after being tested to<br />
240 degrees F.<br />
2. Description: Minimum 40 mils thick, cold applied, self-adhering sheet consisting of slipresisting<br />
polyethylene-film reinforcing and top surface laminated to rubberized asphalt<br />
adhesive, with release-paper backing.<br />
3. Surface Primer / Conditioner: Product as provided by underlayment manufacturer.<br />
4. Acceptable Manufacturers and Products:<br />
a. Carlisle Coatings & Waterproofing Inc.; CCW-WIP-300HT.<br />
b. Grace Construction Products; Ultra.<br />
c. Henry Co.; Blueskin PE200HT.<br />
Central Fire Station, Temple, TX , August 17,2009<br />
WHJ Architect Project No. 0818 Asphalt Shingles - Alternate No. 1 07311 -3
Change language