World of Attachments - Davenport Machine
World of Attachments - Davenport Machine
World of Attachments - Davenport Machine
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
25<br />
REVINLOC AND<br />
OFFSIDE MILLING<br />
1380-SA-4-13 and 1380-SA-6-13<br />
Revinloc Attachment For Rotary Slotting<br />
The revinloc attachment can be mounted on any one <strong>of</strong> the rotary slotters. It is used to index a revolving slotter<br />
in relation to a revolving work spindle. Revinloc attachments can be mounted in any position.<br />
Standard revinloc clutches are available with four teeth for slotting squares and six teeth for slotting hexagons.<br />
Parts produced using Rotary Slotter and a Revinloc Clutch<br />
1232-107-SA<br />
Offside Milling Attachment<br />
With the work spindle stopped, the <strong>of</strong>fside milling attachment is used to mill a flat on one side <strong>of</strong> the work<br />
piece. Mounted similar to a rotary slotter, this attachment can be used in any position. The outer spindle is held<br />
stationary while the inner spindle is driven by the center drive.<br />
As shown below, half the milling head has been cut away to permit simultaneous cross drilling or tapping.<br />
Parts machined using Offside Milling Attachment