Stop & Go Automatic Resetting Device for MCB, RCD and ... - Legrand
Stop & Go Automatic Resetting Device for MCB, RCD and ... - Legrand
Stop & Go Automatic Resetting Device for MCB, RCD and ... - Legrand
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Stop</strong> & <strong>Go</strong> <strong>Automatic</strong> <strong>Resetting</strong> <strong>Device</strong><br />
<strong>for</strong> <strong>MCB</strong>, <strong>RCD</strong> <strong>and</strong> RCBOs<br />
CAT NO. 07381 <strong>and</strong> 07382<br />
In case of unwanted tripping after an electrical fault (earth leakage current or short-circuit), these STOP & GO devices:<br />
■ Check that there is no permanent electrical fault on the circuit be<strong>for</strong>e reclosing the associated device<br />
■ Reclose the associated device, if the fault is not permanent<br />
■ Signal a warning via visual or audio signal if the fault is permanent<br />
■ Test the residual current device automatically <strong>and</strong> periodically (Autotest model)<br />
■ Reduce unnecessary site intervention<br />
■ OFF position can be padlocked<br />
■ Compatible with the following devices: (mounted on right side of the STOP & GO)<br />
- <strong>RCD</strong>’s : 2P - 2 Modules<br />
- RCBO’s : 2P - 2 Modules<br />
- RCBO’s : 2P - 4 Modules<br />
- <strong>MCB</strong>’s : 2P < 63A - 2 Modules<br />
■ Complies with ROHS - halogen free<br />
■ Pre-wired <strong>for</strong> a user-friendly <strong>and</strong> fast installation
Product specifications<br />
Cat No 07381 07382<br />
Model St<strong>and</strong>ard <strong>Automatic</strong> periodic self test (every 56 days)<br />
230V ~ 50/6OHz<br />
230V ~ 50/6OHz<br />
Voltage<br />
Min = 195V ~<br />
Min = 195V ~<br />
Max = 250V ~<br />
Max = 250V ~<br />
Max operating power 20VA 20VA<br />
Short-circuit withst<strong>and</strong> 1500A 1500A<br />
Endurance 4000 operations 4000 operations<br />
Material Polycarbonate with 10% fibreglass Polycarbonate with 10% fibreglass<br />
Protection IP20, IK 02 IP20, IK 02<br />
Average weight 0.360kg 0.360kg<br />
Operating ambient temperature from -5°C to 60°C from -5°C to 60°C<br />
Number of modules 3 3<br />
Mounting DIN rail DIN rail<br />
Installation with STOP&GO<br />
Installation without STOP&GO<br />
HPM Legr<strong>and</strong> - AUS<br />
1300 369 777<br />
www.legr<strong>and</strong>.com.au<br />
HPM Legr<strong>and</strong> - NZ<br />
0800 476 009<br />
www.legr<strong>and</strong>.co.nz<br />
STOP&GO automatic resets the<br />
associated protection device in<br />
order to immediatly re-establish<br />
power supply<br />
Mains fault due to temporarily<br />
electrical disturbances<br />
Electrical devices are not powered<br />
anymore<br />
Alarm Heating Swimming pool Refrigerator<br />
Access control Freezer Aquarium Watering<br />
<strong>Stop</strong> & <strong>Go</strong> <strong>Automatic</strong> <strong>Resetting</strong> <strong>Device</strong><br />
<strong>for</strong> <strong>MCB</strong>, <strong>RCD</strong> <strong>and</strong> RCBOs<br />
CAT NO. 07381 <strong>and</strong> 07382<br />
Refer to your group buying office, HPM Legr<strong>and</strong> Sales Representative or<br />
HPM Legr<strong>and</strong> Sales Office <strong>for</strong> pricing.