and replacement parts

Open Blast cleaning systems
and replacement parts

Wheelabrator Group is the world-leading designer and manufacturer of surface preparation
equipment.
Within the open blast range is on-site and factory based cleaning and preparation equipment,
plus a wide range of replacement parts, protective clothing and blast media. Wheelabrator Group
can provide full technical support, advice and training based on many years experience.
Wheelabrator Group
open blast cleaning systems
Wheelabrator Group product lines include:
Abrasive Developments, Berger, Clean-Tek, Gutmann, Impact Finishers, Matrasur, OLT,
Pangborn Europe, Schlick, Wheelabrator Sisson Lehmann, Spencer Halstead, Tilghman,
Vacu-Blast, Walther Trowal, Wheelabrator, Wheelabrator Plus
2

3
Contents
2 Introduction
3 Contents
4-5 Blast machines
and spares
6-7 Remote control systems,
Metering valves,
Blast hoses
8 Blast nozzles
9 Hose couplings
10-11 Protective clothing
12-13 Miscellaneous
14-15 Blast rooms,
Abrasive recovery systems

sieves and covers
Sieves ensure that no oversize objects can
enter the blast machine. Covers keep out
rain and provide additional operator safety.
U-600-PBM
U-P-15-24 Sieve
U-P-16-24 Pot cover
U-300-PBM
U-P-15-20 Sieve
U-P-16-20 Pot cover
U-150-PBM
U-P-15-14 Sieve
U-P-16-14 Pot cover
water separator and
pressure regulator
A water separator removes moisture from
the compressed air, ensuring that the
abrasive remains dry.
U-600-PBM,
U-300-PBM,
U-150 PBM
U-P23M Water separator
portable abrasive
blast cleaning
machines
Fabricated from heavy gauge steel, tested to
220 psi, these machines feature full bore
pipework, concave top for rapid filling and
conical bottom for easy media flow. Supplied
with deadman’s control as standard.
pop-up valve and
sealing ring
U-600-PBM,
U-300-PBM,
U-150-PBM
U-P5 Sealing ring
other common
spares
U-600-PBM,
U-300-PBM,
U-150-PBM
U-P2 Pop-up valve
U-600-PBM, U-300-PBM, U-150-PBM
U-HNG2 Hypodermic needle gauge
U-600-PBM, U-300-PBM, U-150-PBM
U-MCB1 Machine hose coupling
U-600-PBM, U-300-PBM, U-150-PBM
U-P14 Inspection door assembly
U-600-PBM, U-300-PBM, U-150-PBM
U-P21 32mm choke valve
abrasive blast machines
Type Height Diameter Capacity Media Capacity Weight
U-150-PBM
U-300-PBM
U-600-PBM
1000 mm
1000 mm
1350 mm
4
355 mm
500 mm
610 mm
60 litres
110 litres
200 litres
wadu soda abrasive
delivery unit
U-150-PBM U-300-PBM U-600-PBM
This machine attaches to a high pressure
washer providing a low cost soda cleaning
machine.
U-A17003 Wadu soda abrasive delivery
unit with nozzle
U-ABDW10025 Spare lance with nozzle
assembly
U-ABDW10013 Nozzle assembly (fan)
U-ABDW10017 Fan nozzle insert
U-ABDW10022 No. 4 fan orifice
U-ABDW10023 No. 5 fan orifice
U-ABDW10024 No. 6 fan orifice nozzle
number denotes
g.p.m. @3000 psi
82 kgs
150 kgs
273 kgs
65 kgs
115 kgs
175 kgs

accustrip soda blast machines
Accustrip Model 11SX U-A11001
Accustrip Model 12SX U-A12002
For use with bicarbonate of soda based media in sensitive
areas. Operates at pressures as low as 0.5 bar (7 psi)
U-A24120 Pot cover
U-A44100 Pressure regulator
U-A22101 Pop-up valve
U-A22102 Sealing ring
U-A98524 Machine hose coupling
amphibian blast
machines
The addition of water reduces abrasive
consumption and controls dust emissions.
Fabricated from heavy gauge steel, tested to
220 psi, these machines feature full bore
pipework, concave top for rapid filling and
conical bottom for easy media flow. Supplied
with deadman’s control as standard.
EMP multi-fit feed
valves & guns
VB14346 feed valve
This type of valve is for use where changes in media size
necessitate quick alteration of the feed orifice and for
easy removal of debris blocking the orifice.
The valve can be used on a range of blasting machines
including Wheelabrator (Vacu-Blast), and most other
European machines.
VB14346 & VB14328 suction guns
These types of gun are designed to replace guns on a range
of competitors' machines and are manufactured from existing
Vacu-Blast parts available from stock.
The hose has been designed to fit most machines with three
feed hopper outlets - 10, 16 and 19 mm.
The blast hose is connected to the feed arrangement below
the storage hopper at one end, the other is connected directly
on to the blast gun. Abrasive is fed to the gun through the
hose which has an internally wound anti-static conductor.
U-DYNA-MIX1 U-DYNA-MIX3 U-DYNA-MIX5
Type Height Diameter Capacity Media Capacity Weight
U-DYNA-MIX1
U-DYNA-MIX3
U-DYNA-MIX5
1000 mm
1000 mm
1350 mm
5
355 mm
500 mm
610 mm
60 litres
110 litres
200 litres
30 kgs*
75 kgs*
125 kgs*
NEW !
72 kgs
130 kgs
205 kgs
*when mixed with water

abrasive metering valve
Thompson valve
This Wheelabrator manufactured precision metering valve with
‘normally closed’ operation is particularly suitable for use with
very fine media or where the use of abrasive is to be
minimalised.
M2149-007 Thompson valve
particularly suitable
for fine media
M2149-000-13 Tungsten carbide
sleeve for Thompson
valve
M2149-100-13 Urethane sleeve
for Thompson valve
M2149-000-14 Insert
M2149-007-15 Pipe nipple
Micro valve
Also from Wheelabrator, this valve has a normally open
operation giving precise control of media flow.
M2125-177 Micro valve, a
smaller version of
the Thompson valve
M2125-100-99 Repair kit
M2125-000-05 Plunger
M2125-000-06 Body
M2149-000-06 Plunger seal
M2125-100-08 Urethane sleeve
remote control systems and
silencers 1¼ U-RCV 100C
and 1½ U-RCV 2000
abrasive metering valves
U-GMV-4
abrasive metering valves
A choice of four abrasive metering valves is available and can be
specified on new equipment or retro fitted to existing machines.
U-GMV-1 Grit metering valve for all common abrasives
U-GMV-2 Upper flange
U-GMV-3 Spare liner rubber (black)
U-GMV-3R Spare liner linatex (red)
U-GMV-4 Lower flange and tee
U-P8A 1¼” forged steel nipple
U-FSV-1 Expendable abrasive valve for non-metallic
media
U-P8RLY 1¼” rubber lined Y piece
U-PN2 1¼” rubber lined nipple
remote control systems and
silencers
Operated by a deadman’s switch at the nozzle, Wheelabrator
Group offers a choice of three types.
U-RCV100C 1¼” bore valve fits most machines
U-RCV-2000 1½” bore system
M2223-000 As used on machines made on mainland Europe
U-RCV100C Remote control silencer and valve (1¼”)
U-RCV110 Silencer and cartridge
U-RCV111 Cartridge
U-RCVREP-1 Repair kit
U-RCV2000 Remote control silencer and valve (1½”)
U-RCV110 Silencer and cartridge
U-RCV111 Cartridge
U-RCVREP-1 Repair kit
M2223-000 Schmidt combo valve (1¼”)
M2223-000-99 Repair kit
U-RM21A Deadman’s control handle for U-RCV100C & 2000
U-RM22 Rubber insert for above
U-DMH3-1 Deadman’s control
U-DMH3-6 Rubber insert for above
remote control systems & metering
6
blast hoses U-BH deadman’s and twinline
control airlines U-HOSE-

last hoses
Top quality, 12 bar, SWP anti-static hoses, conforming to all the
latest European standards.
Available in lengths of 10, 20, 30 or 40 m, and in diameters from
13 mm inside diameter to 42 mm.
Shotblast hose 12 bar SWP
U-BH1 13 mm x 28 mm blast hose
U-BH2 19 mm x 33 mm blast hose
U-BH3 25 mm x 39 mm blast hose
U-BH4 32 mm x 48 mm blast hose
U-BH5 38 mm x 56 mm blast hose
U-BH6 42 mm x 60 mm blast hose
U-BH7 32 mm x 53 mm blast hose
deadman’s and twinline
control airlines
Deadman’s control airlines
U-HOSE-7DR 6 mm red deadman’s control lines 20 m lengths
U-HOSE-7DY 6 mm yellow deadman’s control lines 20 m lengths
U-HOSE-7CR 6 mm red deadman’s control lines 10 m lengths
U-HOSE-7CY 6 mm yellow deadman’s control lines 10 m lengths
Twinline control airlines
U-HOSE-7T10 6 mm twinline in 10 m lengths
U-HOSE-7T20 6 mm twinline in 20 m lengths
valves • blasthoses
7
compressor air supply hose
and couplings
This machine attaches to a high pressure washer providing a
low cost soda cleaning machine
Compressor air supply hose and couplings
U-AH5 19 mm (¾”) x 15 m
U-AH6 50 mm (2”) x 10 m
U-AH7 50 mm (2”) x 20 m
U-AH8 39 mm (1½”) x 10 m
U-AH9 39 mm (1½”) x 20 m
U-AHC1 19 mm (¾”) male threaded air hose coupling
U-AHC2 19 mm (¾”) female threaded air hose coupling
U-AHC3 Tail piece coupling with clamps for 19 mm
i/d air hose
U-AHC15 Gaskets for 19 mm air hose coupling
U-AHC6 37 mm (1½”) air hose coupling with clamps
U-AHC8 50 mm (2”) air hose coupling with clamps
other parts for airlines &
couplings
U-SCR1 Screws for securing couplings and nozzle
holders (100)
U-SC1 Whipcheck safety cable
U-A18 6 mm nut for use with U-A16 tailpiece
U-RM23 6 mm brass connectors for use with
U-A16 & U-A18
U-A16 6 mm tail piece for deadman’s helmet airlines
U-A17 12 mm O clip for deadman’s helmet airlines

tungsten carbide nozzles
Wheelabrator Group tungsten carbide nozzles have an
aluminium jacket, 32 mm diameter entry and 50 mm thread. Fine
thread versions available.
U-TCN-32-4/50 6.5 mm bore x 140 mm long
U-TCN-32-5/50 8 mm bore x 150 mm long
U-TCN-32-6/50 9.5 mm bore x 175 mm long
U-TCN-32-7/50 11 mm bore x 205 mm long
U-TCN-32-8/50 13 mm bore x 235 mm long
U-NG32 Nozzle gaskets (for 32 mm entry) (10)
silicon carbide nozzles
These long life, light weight nozzles have a soft nylon jacket,
32 mm diameter entry and 50 mm thread.
U-SCN-5/50 8 mm bore x 150 mm long
U-SCN-6/50 9.5 mm bore x 175 mm long
U-SCN-7/50 11 mm bore x 205 mm long
U-SCN-8/50 12.5 mm bore x 235 mm long
U-NG-32 Spare nozzle gaskets (10)
blast nozzles
tungsten carbide nozzles
U-TCN-32
silicon carbide nozzles
U-SCN
8
other nozzles
Boron Alloy Nozzles - Low cost disposable nozzles
held in the holder by a retainer.
U-CBSD-5 8 mm bore x 150 mm long
U-CBSD-6 9.5 mm bore x 175 mm long
U-CBSD-6 11 mm bore x 205 mm long
U-CBSD-8 12.5 mm bore x 235 mm long
U-LR1 Retainer
Tungsten carbide angled nozzles
U-CAM-4-1-50 6.35 mm bore x 76 mm long, 1 x
U-CAM-4-3-50 6.35 mm bore x 76 mm long, 3 x
U-CAM-5-1-50 8.00 mm bore x 76 mm long, 1 x
U-CAM-5-3-50 8.00 mm bore x 76 mm long, 3 x
U-CAM-6-1-50 9.50 mm bore x 76 mm long, 1 x
U-CAM-7-3-50 9.50 mm bore x 76 mm long, 3 x
M5000 Silicon nitride nozzles
M5000-105 8 mm bore x 150 mm long
M5000-106 9.5 mm bore x 175 mm long
M5000-107 11 mm bore x 205 mm long
M5000-108 12.5 mm bore x 235 mm long
U-CSD Boron carbide nozzle
U-CSD-4/50 6.5 mm bore x 140 mm long
U-CSD-5/50 8 mm bore x 150 mm long
U-CSD-6/50 9.5 mm bore x 175 mm long
U-CSD-7/50 11 mm bore x 205 mm long
U-CSD-8/50 13.5 mm bore x 235 mm long
U-CT Short tungsten carbide nozzles
U-CT-2L 3.20 mm bore x 45 mm long
U-CT-3L 4.80 mm bore x 45 mm long
U-CT-4L 6.35 mm bore x 45 mm long
U-CT-5L 8.00 mm bore x 45 mm long
U-CT-6L 9.50 mm bore x 45 mm long
nozzle U-CAM nozzles U-CT

nylon hose couplings
U-QCN0 Nylon hose coupling for use
with 33 mm o/d hose
U-QCN1 Nylon hose coupling for use
with 39 mm o/d hose
U-QCN2 Nylon hose coupling for use
with 48 mm o/d hose
U-QCN3 Nylon hose coupling for use
with 53 mm o/d hose
brass hose couplings
U-QCB0 Brass hose coupling for use
with 28 mm o/d hose
U-QCB1 Brass hose coupling for use
with 39 mm o/d hose
U-QCB2 Brass hose coupling for use
with 48 mm o/d hose
U-QCB3 Brass hose coupling for use
with 53 mm o/d hose
U-MCB1 32 mm (1 ¼”) threaded machine
coupling
See page 15 for Air Consumption Guide
hose couplings
9
nylon nozzle holders
U-NHP0 Nylon nozzle holder for use
with 28 mm o/d hose
U-NHP1 Nylon nozzle holder for use
with 39 mm o/d hose
U-NHP2 Nylon nozzle holder for use
with 48 mm o/d hose
U-NHP3 Nylon nozzle holder for use
with 53 mm o/d hose
U-NHP-75 Nylon nozzle holder for use
with 33 mm o/d hose
U-LR1 Retainer for flanged ‘Hard Hitter’
nozzles
coupling & nozzle gaskets
U-CG1 Gaskets (10) for use with
brass couplings
U-CG2 As above (10) for use with
U-QCN2 & 3 nylon couplings
U-CG2 Gaskets (10) for use with
U-QCN1 nylon couplings
U-CG15 Gaskets (10) for use with
U-QCN0 nylon couplings
U-NG1 Gaskets (10) for ‘Hard Hitter’
nozzles and retainer
U-NG25 Gaskets (10) for use with
NHP0 & 1 nozzle holder
U-NG32 Gaskets (10) for use with
U-NHP2 & 3 nozzle holder
U-CT1 Hose ties (20) for securing
control hose to blast hose

nova 2000 air fed blast helmet
Item Part Number Description
2 U-NV2002 Nylon respirator cape
U-NV2002FC Fluorescent cape
U-NV2002L Leather respirator cape
U-NV2002S0 Fluorescent cape (safety orange)
U-NV2002XL Nylon respirator cape (x long)
3 U-NV2003 Window frame gasket
4 U-NV2004 Visor for Nova helmet
5/6 U-NV2006/7 Locknut & reducing nipple
7 U-NV2008 Helmet clip (Nova)
8 U-NV2009 Helmet padding / top
U-NV2009/10LH Helmet lining kit (large)
U-NV2009/10SH Helmet lining kit (small)
9 U-NV2010 Helmet padding right & left
10 U-NV2012 Inner bib for cape
11 U-NV2013 Cape connection-cover strip
12 U-NV2016 Flow control valve & belt
13 U-NV2018 Inner lens (pkt 10)
14 U-NV2031 Outer lens (pkt 50)
15 U-NV2017 Tear off lens (pkt 50)
17 U-NV2022 Belt & buckles
18 U-NV2021 Breathing air tube
19 U-NV2023 Breathing tube & flow control assembly
20 U-NV2024CE Saftey quick release tail
21 U-NV2025CE Quick release coupler
23 U-NV2028CE Breathing air supply (10 mtr length)
U-NV2029CE Air supply hose (20 mtr length)
25 U-NV2032 Flow indicator (marked NV2030)
U-N2000CE Nova 2000 Helmet
protective clothing
nova 2000 helmet nova 2000 helmet
10

The NOVA 2000 air fed blast helmet consists of three
components:
Helmet Assembly, Breathing Tube Assembly, Air Supply Hose.
All three components must be present and correctly assembled
to constitute the EN 271, AS/NZS 1715 apparatus approvals.
11
other operator protection
equipment
U-USFBS-1 Blast suit - red (small)
U-USFBS-1/B Blast suit - blue (small)
U-USFBS-2 Blast suit - red (medium)
U-USFBS-2/B Blast suit - blue (medium)
U-USFBS-3 Blast suit - red (large)
U-USFBS-3/B Blast suit - blue (large)
U-USFBS-4 Blast suit - red (x large)
U-USFBS-4/B Blast suit - blue (x large)
U-USFBS-5 Blast suit - red (xx large)
U-USFPS-1 Protective overalls -
heavy duty (small)
U-USFPS-2 Protective overalls -
heavy duty (medium)
U-USFPS-3 Protective overalls -
heavy duty (large)
U-USFPS-4 Protective overalls -
heavy duty (x large)
U-USFPS-5 Protective overalls -
heavy duty (xx large)
U-PPC-1 Disposable cotton overalls
U-PPH-1 Paint/dust hoods (cotton)
U-BPG-1 Blast gloves - cotton & leather
U-RRG-1 24” Blast gloves -
rubber reinforced
U-RRG-2 17” Blast gloves -
rubber reinforced
U-ABF-1S Air breathing filter for blast
helmet (single operator)
U-ABF-1T Air breathing filter for blast
helmet (two operators)
U-ABF-2 Breathing filter replacement
cartridge
U-ED1 Ear defenders (Apollo helmet)
spares for cavalier air fed
blast helmet
U-SBM-4367 Spare inner lens
U-SBM-4373 Spare intermediate lenses
(pkt 100)
U-SBM-0003 Outer lenses (pkt 100)
U-SBM-4435 Spare cape & muffler
U-SB-6 Latex cover
Other Blast Helmets
Competitively priced spares and replacement lenses are
available for almost all types of helmet - a sample may be
required. Please note - outer lens may or may not be OEM
replacement. If concerned please enquire when ordering.

lighting pipe internal blast tools
U-BLB1-B Blast hose lamp complete with bulb
U-BL2-B Replacement bulb
U-BL3 Replacement lenses (100)
U-BL4 Front end cap
U-UN120 Portable shotblast lamp with shatterproof bowl
miscellaneous
lighting U-BLB1-B. pipe internal blast tool
U-TB-1/13
12
Rotorblast: for pipes 165 mm to 915 mm
Tublast: for pipes 50 mm to 75 mm
Tublast & collars: for pipes 75 mm to 125 mm
Tublast & carriage: for pipes 125 mm to 300 mm
Miniblast: for pipes 19 mm to 50 mm
U-RB-1 Rotorblast with centering carriage
(nozzles not included)
U-TB-1/13 Tublast complete with U-TB-1 &
U-TB-2 centering devices
U-TB-1 Collars for Tublast including studs
(various lengths)
U-TB-2 Carriage for Tublast
U-MB-1 Miniblast
U-RB-16 Nozzle for Rotorblast -
6.00 mm x 45 mm long
U-RB-17 Nozzle for Rotorblast -
8.00 mm x 45 mm long
U-RB-18 Nozzle for Rotorblast -
8.00 mm x 80 mm long
U-RB-19 Nozzle for Rotorblast -
9.50 mm x 100 mm long
U-RB-20 Nozzle for Rotorblast -
9.50 mm x 45 mm long
U-KTB-8 Nozzle for Tublast - 13.00 mm bore
U-KTB-10 Nozzle for Tublast - 16.00 mm bore

abrasive transfer systems
The Jetpump offers a low cost means of transferring franular
material from one area to another using compressed air as a
power source. Typically, the unit is used to remove spent
abrasive from the inside of tanks and vessels, through man
access holes to waste disposal skips. The system simply
sucks up abrasive on recovery and blows it out on discharge.
It requires 250 cfm of air at 90 psi to recover at a rate of 3
tonnes per hour for expendable abrasive. When ordering, a
vacuum recovery hose will be required and the total length of
recovery should be covered mainly by a 63 mm diameter
suction hose with a 100 mm discharge hose kept to a
minimum length.
U-JP1 Jet pump transfer system
U-SH3 63 mm diameter suction hose
U-SH5 100 mm diameter discharge hose
13
pipe internal coating tools
Effective: Coats the inside of pipes by centrifugal force
evenly and quickly, without the need to rotate
the pipes.
Simple: Used directly from an airless spray unit high
pressure paint hose. No additional hose or gun
required.
Flexible: Easy adjustable legs can be adjusted to suit a
range of pipe diameters.
U-IPC300 Pipe Coater: for pipes 125 mm to 300 mm
U-IPC900 Pipe Coater: for pipes 300 mm to 900 mm

Blast room internal view
Blast room external view
Component being cleaned
blast rooms
Component being cleaned
blast rooms
A full range of blast rooms is available from Wheelabrator
Group incorporating all types of recovery systems.
Typically manufactured from 3 mm thick castellated steel, the
rooms come complete with protective rubber sheeting lining the
inside of the walls and doors.
Rooms are carefully designed to provide excellent air flow
through the room which is vital to provide the operator with
clear visibility and prevent recontamination of the recycled
abrasive.
dust collectors
Wheelabrator Group is able to offer a range of dust collectors
for site and fixed use. Purpose designed units in the 5000 to
10000 cfm range are available - details on request.
Replacement filter bags and cartridges are available for most
dust collectors at very competitive prices. Please call our sales
office for a quotation - in some cases a sample of the filter
bag/cartridge may be required.
14

vacuum abrasive
recovery system
Wheelabrator offers this compact unit to provide a quick and
efficient method of abrasive recovery and cleaning. It therefore
brings all the benefits of efficient blast cleaning and media
recovery to even those with a modest budget. Minimal or no
civil work is required to install the unit.
screw recovery
system
For many years the screw system has been the standard
means of full floor recovery from blast rooms. Electrically driven
longitudinal screws push the abrasive to a cross screw which
feeds a bucket elevator. The screws are mounted in troughs
which are sunk into the floor - typically these are sunk as low
as possible to provide a wider floor recovery area per screw.
Local water table levels and cost of excavation should be
considered when choosing the system.
All systems have grid floors for the operator to walk on and
allow abrasive to fall through.
abrasive recovery systems
Air Consumption Guide
Nozzle Nozzle (psí) 50 60 70 80 90 100 125
Orifice Pressure (bar) 3.5 4.2 4.9 5.6 6.3 7 8.6
3/16” / 5 mm
¼” / 6 mm
5/16” / 8 mm
Air (CFM)
M3/min
H.P.
Kw
Abrasive Ib/hr
Abrasive kg/hr
Air (CFM)
M3/min
H.P.
Kw
Abrasive Ib/hr
Abrasive kg/hr
Air (CFM)
M3/min
H.P.
Kw
Abrasive Ib/hr
Abrasive kg/hr
26
0.73
6
4.5
150
85
47
1.31
11
7.9
268
152
80
2.16
17
18
470
255
30
0.84
7
5.3
171
97
54
1.51
12
9
312
178
90
2.5
20
20
530
302
33
0.92
8
5.6
196
111
61
1.71
14
10.1
354
200
100
2.83
25
23
600
342
38
1.06
9
6.4
216
123
68
1.9
16
11.6
408
231
115
3.16
27
26
675
380
41
1.15
10
7.1
238
136
74
2.08
17
12.4
448
254
125
3.53
28
28
750
420
45
1.26
10
7.5
264
150
81
2.27
18
13.5
494
280
140
3.84
31
31
810
460
15
55
1.54
12
9
319
180
98
2.75
22
16.2
606
336
170
4.71
36
37
980
552
Vacuum abrasive recovery system
Screw recovery system
Nozzle 50 60 70 80 90 100 125
Orifice 3.5 4.2 4.9 5.6 6.3 7 8.6
3/8” / 9.50 mm
7/16” / 11 mm
1/2” / 12 mm
110
3.02
25
18
675
378
150
4.12
35
24.8
900
507
200
5.46
45
32.6
1160
657
125
3.53
29
21
775
433
170
4.76
40
28.5
1030
585
225
6.28
50
37.5
1350
756
145
4
32
24
875
490
200
5.44
45
32.6
1200
655
250
7.06
55
42
1500
856
160
4.5
35
27
975
544
215
6.09
50
36.4
1300
744
275
7.85
63
46.9
1700
951
175
4.85
40
28.9
1060
596
240
6.73
55
40.1
1450
820
300
8.85
70
51.8
1850
1050
200
5.5
45
33
1100
653
255
7.11
60
42.4
1585
896
340
9.46
75
56.3
2025
1148
235
6.64
52
39.6
1395
784
315
8.8
70
50.9
1930
1075
410
11.46
95
67.6
2460
1378

ASIA
China
Wheelabrator Group Ltd.
Unit 4707, 47/F, Hong Kong New World Tower
300, Huaihai Road Central
Shanghai 200021
T: +86 21 5116 2881
F: +86 21 5116 2892
E: info.shanghai@wheelabratorgroup.com.cn
Hong Kong
Wheelabrator Group Ltd.
Unit 03, 11th Floor., Futura Plaza,
111-113 How Ming Street,
Kwun Tong, Kowloon, Hong Kong
T: +852 2827 1927
F: +852 2877 6839
E: info@wheelabratorgroup.com.hk
BELGIUM
Wheelabrator Group N.V.
Airport Ring Center
Maalbeekweg 61, B-1930 Zaventem
T: +32 27190140
F: +32 27190145
E: info@wheelabratorgroup.be
CANADA
Wheelabrator Group
1219 Corporate Drive
Burlington, Ontario L7L 5V5
T: +1 (800) 845 8508
T: +1 (905) 319 7930
F: +1 (905) 319 7561
E: info@wheelabratorgroup.com
CZECH REPUBLIC & SLOVAKIA
Wheelabrator Group s.r.o.
Dárská 12/516
CZ-198 00 Praha 9
T: +420 281 866 009
F: +420 281 868 674
E: info@wheelabratorgroup.cz
FRANCE
Wheelabrator Group
28-30 Rue de Tournenfils, BP 19
91541 Mennecy-Cedex
T: +33 (0) 1 64 57 21 21
F: +33 (0) 1 64 57 05 59
E: contact@wheelabratorgroup.fr
Wheelabrator Group (Technology Centre)
24, rue Camille Didier BP 39
F-08001 Charleville-Mézières Cédex
T: +33 (0) 324 33 63 21
F: +33 (0) 324 37 39 37
E: sisson-lehmann@wheelabratorgroup.fr
GERMANY
Wheelabrator Group GmbH
Poll-Vingster Strasse 107
D- 51105 Köln
T: +49 (0) 221 83 94 0
F: +49 (0) 221 83 94 444
E: info@wheelabratorgroup.de
Wheelabrator Group GmbH (Technology Centre)
Heinrich-Schlick-Strasse 2
D-48629 Metelen
T: +49 (0) 25 56 88 0
F: +49 (0) 25 56 88 150
E:kontakt@wheelabratorgroup.de
ITALY
Pangborn Europe Srl. (Technology Centre)
Via E. Fermi 75
I-21042 Caronno Pertusella Varese (VA)
T: +39 02 9639951
F: +39 02 9656741
E: pbeurope@pangborneurope.it
MEXICO
WG Plus Mexico S. De R.L. de C.V.
Av. Universidad 1290, Local #19,
Colonia Casa Bella
San Nicolas de los Garza, Mexico 66428
T: +52 81 8302 3631
F: +52 81 8302 3632
E: mexico@wheelabratorgroup.com
POLAND
Wheelabrator Schlick Sp. z o.o.
Zaklad Produkcyjny, ul. Berdychów 57a
PL 62-410 Zagórów
T: +48 (0) 63 2761819
F: +48 (0) 63 2761920
E: info@wheelabratorgroup.pl
ROMANIA
Wheelabrator Group S.R.L.
67-77 Biharia Street, Sector 1
715315 Bucuresti Romania
T: +40 21 2011 780
F: +40 21 2011 790
E: info@wheelabratorgroup.ro
RUSSIA
Wheelabrator Group
Ul. Malakhitovaya 27, Building 1
129128 Moscow
T: +7 495 1815548
F: +7 495 1815571
E: info@wheelabratorgroup.ru
SPAIN
Wheelabrator Group S.L.U.
Constitución, 19 Bloque 8 – 2a 9a
E-08014 Barcelona
T: + 34 93 421 1266
F: + 34 93 422 3137
E: contact@wheelabratorgroup.es
UNITED KINGDOM
Wheelabrator Group Ltd.
P.O. Box 60, Craven Road, Altrincham
UK. WA14 5EP
T: +44 (0) 161 928 6388
F: +44 (0) 161 929 0381
E: uk-info@wheelabratorgroup.co.uk
USA
Wheelabrator Group
1606 Executive Drive
LaGrange, GA 30240
T: +1 (800) 544 4144 • T: +1 (706) 884 6884
F: +1 (706) 884 0568
E: info@wheelabratorgroup.com
www.wheelabratorgroup.com
Wheelabrator Group Ltd.
P.O. Box 60, Craven Road
Altrincham, UK
WA14 5EP
T: +44 (0) 161 928 6388
F: +44 (0) 161 929 0381
E: uk-info@wheelabratorgroup.co.uk
W: www.wheelabratorgroup.com