and replacement parts

last hoses
Top quality, 12 bar, SWP anti-static hoses, conforming to all the
latest European standards.
Available in lengths of 10, 20, 30 or 40 m, and in diameters from
13 mm inside diameter to 42 mm.
Shotblast hose 12 bar SWP
U-BH1 13 mm x 28 mm blast hose
U-BH2 19 mm x 33 mm blast hose
U-BH3 25 mm x 39 mm blast hose
U-BH4 32 mm x 48 mm blast hose
U-BH5 38 mm x 56 mm blast hose
U-BH6 42 mm x 60 mm blast hose
U-BH7 32 mm x 53 mm blast hose
deadman’s and twinline
control airlines
Deadman’s control airlines
U-HOSE-7DR 6 mm red deadman’s control lines 20 m lengths
U-HOSE-7DY 6 mm yellow deadman’s control lines 20 m lengths
U-HOSE-7CR 6 mm red deadman’s control lines 10 m lengths
U-HOSE-7CY 6 mm yellow deadman’s control lines 10 m lengths
Twinline control airlines
U-HOSE-7T10 6 mm twinline in 10 m lengths
U-HOSE-7T20 6 mm twinline in 20 m lengths
valves • blasthoses
7
compressor air supply hose
and couplings
This machine attaches to a high pressure washer providing a
low cost soda cleaning machine
Compressor air supply hose and couplings
U-AH5 19 mm (¾”) x 15 m
U-AH6 50 mm (2”) x 10 m
U-AH7 50 mm (2”) x 20 m
U-AH8 39 mm (1½”) x 10 m
U-AH9 39 mm (1½”) x 20 m
U-AHC1 19 mm (¾”) male threaded air hose coupling
U-AHC2 19 mm (¾”) female threaded air hose coupling
U-AHC3 Tail piece coupling with clamps for 19 mm
i/d air hose
U-AHC15 Gaskets for 19 mm air hose coupling
U-AHC6 37 mm (1½”) air hose coupling with clamps
U-AHC8 50 mm (2”) air hose coupling with clamps
other parts for airlines &
couplings
U-SCR1 Screws for securing couplings and nozzle
holders (100)
U-SC1 Whipcheck safety cable
U-A18 6 mm nut for use with U-A16 tailpiece
U-RM23 6 mm brass connectors for use with
U-A16 & U-A18
U-A16 6 mm tail piece for deadman’s helmet airlines
U-A17 12 mm O clip for deadman’s helmet airlines