Replacement parts catalog - Soluciones totales para la fundición

ABRASIVE CYCLONE
The cyclone is specifically intended for use with smaller, lighter metallic abrasives and various non-metallic
abrasives. Its greater efficiency in the removal of small contaminants makes it the preferred device for control of
dust and the salvage of usable abrasive. Air flow through the cyclone causes the heavier usable abrasive particles
to follow the outer air path and flow out the bottom of the trap while the finer particles of abrasive and
contaminants follow the inner air path to the collector. Contact your customer service representative with your
machine serial number and abrasive type and size for a quotation on an abrasive trap.
CYCLONE SEPARATOR SELECTION CHART
CYCLONE CYCLONE
PACKAGE* ONLY
133634 133685 34.00” 18.00” 9.00” 9.00” 9.00” 6.00”
133635 133657 44.75” 24.00” 12.00” 12.00” 11.00” 8.00”
133636 133658 55.38” 30.00” 15.00” 15.00” 13.00” 10.00”
137690 133686 66.00” 36.00” 18.00” 18.00” 16.00” 12.00”
283726 283727 78.00” 42.00” 21.00” 21.00” 18.00” 14.00”
285146 285147 86.00” 48.00” 24.00” 24.00” 20.00” 16.00”
497162 497161 4.00” 60.00” 33.00” 33.00” 24.00” 20.00”
Overhead View
ACCESSORIES AND CONTROLS
A B C D E F
*All cyclone separator packages include cyclone, pipe adapter, drain hose, (2) hose clamps
and a dribble valve. Field assembly required.
A
B I.D. C 2.00"
D I.D.
OUTLET
C
INLET
Wheelabrator Group • 800-544-4144 • fax 706-884-0710 • www.wheelabratorgroup.com
48
F
E
I.D.