Spectre Sensors - Western Gauge and Instruments Ltd.
Spectre Sensors - Western Gauge and Instruments Ltd.
Spectre Sensors - Western Gauge and Instruments Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Spectre</strong> <strong>Sensors</strong><br />
32357 Walker Road, Avon Lake, Ohio 44012-2224<br />
Ph: 440-930-5699 Fax: 440-930-5668<br />
e-mail: sales@spectresensors.com<br />
Terms <strong>and</strong> Conditions<br />
Payment Terms: Net 30 days from the date of invoice, subject to credit approval.<br />
All Orders are subject to acceptance by <strong>Spectre</strong> <strong>Sensors</strong><br />
Price Quotations: All price quotations are firm for 30 days from the date of quotation or as<br />
stipulated in writing<br />
Order Revisions: A charge of $100.00, plus applicable engineering time at $100.00 per hour<br />
<strong>and</strong> material <strong>and</strong> labor charges as required may be added to orders where the purchaser<br />
initiates a change in specification after the order has been released to production.<br />
Cancellations <strong>and</strong> Returns: See the Cancellations <strong>and</strong> Returns policy document.<br />
Special Products: Products made to customer specifications, which are beyond the<br />
st<strong>and</strong>ard, cataloged product capabilities are not returnable. Orders for such products cannot<br />
be cancelled after commencement of the manufacture of the units <strong>and</strong> procurement of any<br />
special materials required.<br />
Claims: Claims concerning defective goods should be made at once <strong>and</strong> must be made<br />
within five (5) working days after discovery. Claims for errors, shortages, etc. must be made<br />
within five (5) working days of receipt of material. Freight claims are the responsibility of the<br />
consignee on all orders shipped FOB Factory (Ex-Works).<br />
Product Change: The right to make changes in design or material when necessary <strong>and</strong><br />
without prior notice, is reserved.<br />
Responsibility <strong>and</strong> Risk: <strong>Spectre</strong> <strong>Sensors</strong> is not responsible for loss due to delays resulting<br />
from any cause other than our own negligence. All goods are at the risk of the purchaser after<br />
they have been received by a licensed carrier in good order.<br />
Fair Labor Act: <strong>Spectre</strong> warrants that all goods are manufactured in accordance with the<br />
requirements of the Fair labor St<strong>and</strong>ards Act of 1938 as amended <strong>and</strong> regulations <strong>and</strong> orders<br />
of the United States Department of Labor issued under Section 14 thereof.<br />
Minimum Invoice: <strong>Spectre</strong> <strong>Sensors</strong> minimum invoice charge is $100.00.<br />
Pricing: All price lists, factory quotations <strong>and</strong> invoices are stated in US Dollars. All invoices<br />
must be paid in US Dollars.<br />
<strong>Spectre</strong> terms.doc
<strong>Spectre</strong> <strong>Sensors</strong> Warranty<br />
All <strong>Spectre</strong> <strong>Sensors</strong> products are warranted to be free from defects in material <strong>and</strong> workmanship for a period of one year from<br />
the date of shipment. The warranty does not cover overpressure of the unit, abuse, customer modifications to the device or<br />
electrical overload.<br />
Where transducers are manufactured with Titanium or Inconel wetted parts, the corrosion resistance warranty will be 5 years<br />
from date of shipment.<br />
For any warranty claims, please refer to the following procedure:<br />
<strong>Spectre</strong> <strong>Sensors</strong> Repair policy<br />
1.) All return requests, regardless of warranty status, require a factory-issued RA (Return Authorization) number. Please be<br />
prepared to supply the following information to obtain an RA number:<br />
Provide information as to the nature of the application <strong>and</strong> reason for the return request.<br />
A purchase order to cover the cost of any repair charges.<br />
2.) Pricing structure <strong>and</strong> definitions of offered procedures:<br />
Evaluation: The process by which the Repair Department will record the unit's incoming data run <strong>and</strong> verify if the unit<br />
meets specification. The charge for evaluation is $50.00. The evaluation fee is waived if the unit is under warranty or<br />
credited to the cost of repair or replacement if not under warranty. If no defect is found, the $50.00 evaluation charge<br />
will apply to cover labor costs.<br />
Certificate of Calibration: Represents a 5 point run traceable to NIST st<strong>and</strong>ards. The charge for a Certificate of<br />
Calibration is $65.00.<br />
Repair: The process of reworking the existing unit to st<strong>and</strong>ard specifications. The charge for repair is 60% of the list<br />
price of a new unit. This charge includes a calibration record representing a 2 point run.<br />
All repairs are subject to both inbound <strong>and</strong> outbound freight charges<br />
3.) SPECTRE SENSORS warrants its repairs to the original consumer/purchaser against defects in materials <strong>and</strong> workmanship<br />
for a period of 90 days from the date of return shipment from SPECTRE SENSORS, as shown in its shipping documents,<br />
subject to the following terms <strong>and</strong> conditions:<br />
Without charge, SPECTRE SENSORS will repair or replace products found to be defective in materials or workmanship within<br />
the warranty period provided that:<br />
The product has not been subjected to abuse, neglect, accident, incorrect wiring, improper installation or servicing, or<br />
use in violation of instructions furnished by SPECTRE SENSORS.<br />
As to any prior defect in materials or workmanship covered by this warranty, the product has not been repaired or<br />
altered by anyone except SPECTRE SENSORS or its authorized service agencies:<br />
The Serial Number has not been removed, defaced or otherwise changed;<br />
If examination discloses, in the judgment of SPECTRE SENSORS, a defect in materials or workmanship which<br />
developed under normal installation, use <strong>and</strong> service.<br />
SPECTRE SENSORS is notified in advance of, <strong>and</strong> approves, the return <strong>and</strong> the products are returned to SPECTRE<br />
SENSORS transportation prepaid.<br />
This warranty is <strong>Spectre</strong> <strong>Sensors</strong>’ only warranty <strong>and</strong> is in lieu of any other warranty expressed or implied, including<br />
any warranty of merchantability or fitness. No representative or person is authorized to offer any other warranty or to<br />
assume for <strong>Spectre</strong> <strong>Sensors</strong> any other liability in connection with the sale of its products. <strong>Spectre</strong> <strong>Sensors</strong> does not<br />
assume the costs of removal <strong>and</strong>/or installation of the product or any other incidental costs which may arise as a result<br />
of any defect in materials or workmanship, nor will <strong>Spectre</strong> <strong>Sensors</strong> be liable for any consequential damages resulting<br />
from the use or installation of its product.<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
Ph: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: sales@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
32357 Walker Road, Avon Lake, OH 44012-2224<br />
Ph: 440-930-5699 Fax: 440-930-5668<br />
e-mail: sales@spectresensors.com<br />
Cancellation <strong>and</strong> Return Material Policy<br />
Sales Order Cancellations<br />
All order cancellations must be received in writing via email, fax or mail <strong>and</strong> are subject to a 25%<br />
cancellation fee if the order has been released to production. If the order has shipped from the factory,<br />
it cannot be cancelled. No products may be returned for credit without the written consent of <strong>Spectre</strong><br />
<strong>Sensors</strong> in advance of such a return<br />
Returns<br />
In general, all purchases of <strong>Spectre</strong> <strong>Sensors</strong> product are considered final.<br />
Any request to return any <strong>Spectre</strong> product must be reviewed <strong>and</strong> approved by <strong>Spectre</strong>’s<br />
management.<br />
Product that is older than 3 months from date of shipment will not be considered for return.<br />
Product that is under 3 months old, if return is approved, will be subject to a 50% restocking fee.<br />
All requests for return must be made in writing <strong>and</strong> include a list of products to be returned<br />
along with model numbers, serial numbers <strong>and</strong> original order information.<br />
All products must be in their original packaging <strong>and</strong> be new <strong>and</strong> unused.<br />
Product that is not of current design cannot be returned. Non-st<strong>and</strong>ard <strong>and</strong> custom product<br />
cannot be returned.<br />
Products that have been rendered obsolete cannot be returned.<br />
Any product returned to <strong>Spectre</strong> <strong>Sensors</strong> must be accompanied by a Return Goods Authorization<br />
(RGA) number issued by the Sales Department. Products returned to <strong>Spectre</strong> <strong>Sensors</strong> without an RGA<br />
will be not be processed for any reason <strong>and</strong> shipment may be refused.<br />
<strong>Spectre</strong> cancellation & return policy.doc
<strong>Spectre</strong> <strong>Sensors</strong><br />
32357 Walker Road, Avon Lake, Ohio 44012<br />
Ph: 440-930-5699 Fax: 440-930-5668<br />
e-mail: sales@spectresensors.com<br />
Material Return / Repair Form<br />
Return Authorization Number: Date:<br />
NOTE: Return unit(s) to address shown at the bottom of this form!<br />
Customer name <strong>and</strong> address:<br />
Transducer Make <strong>and</strong> Model Number:<br />
Serial Number:<br />
Nature of problem:<br />
Contact:<br />
Phone:<br />
Fax:<br />
Email:<br />
(Note: Units returned for warranty repair that exhibit no defects will be subject to a $50.00/unit inspection charge. If a factory defect is found,<br />
no inspection charge will apply)<br />
This area for <strong>Spectre</strong> <strong>Sensors</strong> use:<br />
Inspected by:<br />
Condition as found:<br />
Condition as left:<br />
Cost to repair:<br />
Return unit(s) for repair, along with this form to the following address:<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
Repair Center<br />
7610 Transit Road<br />
Williamsville, NY 14221<br />
Please mark the outside of the shipping carton with the Return Authorization number to<br />
insure quickest h<strong>and</strong>ling.
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 1000 General Purpose Pressure Transducer<br />
Eliminate Drift – Fused Bond sensor technology for long-term<br />
stability<br />
Eliminate Noise – Maximum RFI/EMI protection on every<br />
transducer<br />
Outputs - 4-20mA, 0-5V & 0-10V – custom outputs available<br />
Pressure ranges 0-10” WC to 0-30,000 PSI<br />
Accuracies to 0.1% BFSL<br />
Unparalleled long-term stability<br />
Temperature compensation at the sensor element.<br />
Custom designs available (contact factory)<br />
<strong>Spectre</strong>’s Model 1000 is specifically engineered to eliminate the two most common problems with pressure transducers, noise <strong>and</strong><br />
drift. It’s large, raw sensor output (10-70X that of a bonded foil strain gauge device), The long term stability of Model 1000 <strong>and</strong><br />
st<strong>and</strong>ard RF!/EMI protection provide the most rugged <strong>and</strong> reliable transducer for industrial applications. Originally designed to<br />
withst<strong>and</strong> the rigorous testing requirements of defense <strong>and</strong> space applications, The Model 1000 offers aerospace performance to<br />
the industrial marketplace.<br />
Performance @ 25°C (77°F)<br />
Accuracy:
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 1000 General Purpose Pressure Transducer<br />
Ordering guide – Example: 1000-A-(0-500PSI)-2-D-5-EC2<br />
A (0-500) 2 D 5 EC1<br />
Pressure Port Range Units Output Accuracy Connector<br />
A=1/4” MNPT Specify Pressure 1=Absolute<br />
D=4-20mA<br />
5=0.5% BFSL* EC1=36” pigtail<br />
B=SAE-4 (w/o-ring) Range in PSI, BAR, 2=<strong>Gauge</strong><br />
E=0-5VDC<br />
2=0.2%<br />
EC2=DIN 43650 with mate-<br />
C=Other<br />
kPa or inches WC 3=Vacuum<br />
F=0-10VDC<br />
1=0.1%<br />
Large<br />
D=1/8”MNPT<br />
4=Sealed<br />
X=Other<br />
EC3=Mini DIN<br />
E=Autoclave F250C<br />
5=Compound<br />
(4-wire, isolated<br />
EC4=Bendix 6-pin<br />
6=Other<br />
versions available –<br />
EC9=1/2” NPT conduit<br />
Contact Factory)<br />
connection with 36” leads<br />
*BFSL = Best Full Scale Line<br />
Dimensions<br />
(For reference only. Actual dimensions may vary)<br />
For pressure ranges below 300 PSI, the “L” dimension is 4.20”<br />
Current Output Voltage Output<br />
Wiring 4-20mA, DIN 43650 Wiring Voltage, DIN 43650<br />
Pin 1 + excitation Pin 1 + excitation<br />
Pin 2 - excitation/signal Pin 2 - excitation/signal<br />
Pin 3 no connection Pin 3 + signal<br />
Pin 4 no connection Pin 4 no connection<br />
Power 9-32 Vdc<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
Wiring 4-20mA, Cable 0-10 Vdc 13-32 Vdc<br />
White + excitation<br />
Black - excitation/signal Wiring Voltage, Cable<br />
Red + excitation<br />
Power 9-32 Vdc Green + signal<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
Black - excitation/signal<br />
White no connection<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
0-10 Vdc 13-32 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
1000LT Series OEM Pressure Transducer<br />
Performance @ 25°C (77°F)<br />
Accuracy:
1000LT Series OEM Pressure Transducer<br />
Ordering guide – Example: 1000LT-A-(0-100PSI)-2-M-EC1-174<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
1000LT A 0-100PSI 2 M EC1 174<br />
Model Pressure port Range Units Output Connector Material<br />
1000LT<br />
A=1/4” MNPT Specify pressure 2=<strong>Gauge</strong> D=4-20mA EC1=36” wiring 174=17-4 ss<br />
B=SAE-4 male range in:<br />
4=Sealed M=1-5Vdc<br />
Leads 316=316 ss<br />
C=Other PSI (5-10,000) or 5=Compound N=1-6Vdc EC3=Mini DIN<br />
equivalent in 6=Other P= 5 mV/V EC9=1/2”MNPT<br />
BAR, kPa, etc.<br />
R=Ratiometric w/24” leads<br />
(0.5 to 4.5v)<br />
X=Other<br />
ECX=Other<br />
Dimensions: Model 1000LT<br />
Above dimensions may vary with options. Specifications subject to change without prior notice.<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
Wiring 4-20mA output, Cable<br />
White + excitation<br />
Black - excitation/signal<br />
Power 10-29 Vdc<br />
Wiring Voltage output, Cable<br />
Red + excitation<br />
White - signal<br />
Black - excitation/signal<br />
Power 10-29 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 9000 Precision Pressure Transducer<br />
Transducer is customized to your specific temperature<br />
<strong>and</strong> pressure conditions<br />
Outputs: 4-20mA, 0-5 Vdc, 0-10 Vdc. Optional 4-wire,<br />
isolated outputs <strong>and</strong> RS232/RS485 available.<br />
Pressure ranges 0-10” WC to 30,000 PSI<br />
St<strong>and</strong>ard accuracy of 0.05% BFSL (optional 0.03%)<br />
Built-in, proprietary design, lightning <strong>and</strong> surge<br />
protection supplied as st<strong>and</strong>ard<br />
Unparalleled long-term stability<br />
Digital temperature correction at operating conditions<br />
Field rangeable 5:1<br />
<strong>Spectre</strong>’s Series 9000 is the first available pressure transducer that is designed, manufactured <strong>and</strong> calibrated to each application’s<br />
specific operating conditions. Each transducer’s output is digitally mapped to correct for any non-linearity or inaccuracies<br />
in the sensing element. This digital correction provides the most accurate <strong>and</strong> flexible pressure transducer in the industry.<br />
Performance @ 25°C (77°F)<br />
Accuracy:
Model 9000 Precision Pressure Transducer<br />
Ordering guide – Example: 9000-A-(0-150PSIG)-2-D-05-EC2<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
A (0-150PSIG) 2 D 05 EC2<br />
Pressure Port Range Units Output Accuracy Connector***<br />
A=1/4” MNPT<br />
B=SAE-4<br />
C=Other<br />
D=1/8” MNPT<br />
E=Autoclave<br />
F-250-C<br />
Specify pressure range<br />
in: PSI, BAR, kPa or<br />
inches WC.<br />
1=Absolute<br />
2=<strong>Gauge</strong><br />
3=Vacuum<br />
4=Sealed<br />
5=Compound<br />
6=Other<br />
*BFSL = Best Fit Straight Line<br />
**Combination 4-20mA + Comms available – consult factory<br />
*** Some outputs may preclude use of certain connectors – consult factory for details<br />
Note: Operating temperature must be specified at time of order placement.<br />
Dimensions:<br />
“L” = 4.3” in ranges >300 psi, 5.2” in ranges
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 9510U USB Enabled Pressure Transducer<br />
Direct USB 2.0 connection to data acquisition <strong>and</strong><br />
test systems<br />
Transducer is custom configured to your specific<br />
temperature <strong>and</strong> pressure conditions<br />
ASCII data output to interface with virtually DAQ or<br />
control system<br />
Pressure ranges 0-10” WC to 0-30,000 PSI<br />
<strong>Gauge</strong>, sealed <strong>and</strong> absolute ranges<br />
Accuracies to 0.03% BFSL<br />
Unparalleled long-term stability<br />
Cable lengths to 300 feet (consult factory)<br />
Pressure <strong>and</strong> temperature data supplied from one<br />
device.<br />
Maximum RFI/EMI protection on every transducer<br />
Temperature compensation at the sensor element.<br />
Custom designs available (contact factory)<br />
<strong>Spectre</strong>’s 9510U USB Pressure/Temperature Transducers offer the first precision USB 2.0 enabled sensors on the market that<br />
are designed <strong>and</strong> calibrated to each customer’s specific operating conditions. Each transducer is digitally mapped to correct<br />
for any non-linearity or inaccuracies in the sensor. This digital correction provides the most accurate <strong>and</strong> flexible transducer in<br />
the industry.<br />
Performance @ 25°C (77°F)<br />
Accuracy:
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 9510U USB Enabled Pressure Transducer<br />
Ordering guide – Example: 9510U-A-(0-500PSI)-2-05-UC<br />
A (0-500) 2 05 UC<br />
Pressure Port Range Units Accuracy Connector<br />
A=1/4” MNPT<br />
Specify Pressure 1=Absolute<br />
05=0.05% BFSL* UC=USB “A” male connector with 4<br />
B=SAE-4 male Range in PSI, BAR, 2=<strong>Gauge</strong><br />
03=0.03% BFSL*<br />
feet of cable<br />
(w/o-ring)<br />
kPa or inches WC 3=Vacuum<br />
C=Other<br />
4=Sealed<br />
D=1/8”MNPT<br />
5=Compound<br />
E=Autoclave F250C<br />
6=Other<br />
*BFSL = Best Full Scale Line<br />
Dimensions<br />
Notes:<br />
• The <strong>Spectre</strong> Model 9510U pressure transducer is suitable for use with any system that can accept ASCII data input over<br />
a USB 2.0 connection.<br />
• Every Model 9510U is shipped with the required drivers to interface the unit with PC based systems.<br />
• Orders for 9510U transducers must include expected operating temperature of the process to insure maximum accuracy<br />
<strong>and</strong> linearity on your system. If not specified, the default calibration of 0°-50°C will be applied.<br />
• Calibration data <strong>and</strong> system readings can be accessed via st<strong>and</strong>ard terminal emulation programs.<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
102907<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
Model 2000 Precision Barometric Pressure Transducer<br />
o Transmitter is customized to your specific<br />
atmospheric requirements<br />
o Transmitter output is digitally mapped to enhance<br />
accuracy at any specific Temperature or Pressure<br />
range.<br />
o Multiple Outputs – 4-20mA, 0-5V, 0-10V, RS232,<br />
RS485 <strong>and</strong> USB 2.0<br />
DESCRIPTION<br />
FEATURES DIMENSIONS<br />
o Proprietary Fused Bond<br />
Sensor<br />
o Accuracy 0.05% to 0.03% BFSL<br />
o RFI/EMI Protection<br />
o Digital Temperature Correction<br />
at operating conditions<br />
o Sensor Wetted Material<br />
Machined From Solid Stainless<br />
Steel Bar Stock (No Welds)<br />
o Unparalleled Long Term<br />
Stability<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
o Accuracies to 0.03% BFSL<br />
o 24.4”to 34.6”HgA range (custom ranges<br />
available. See page 2)<br />
o Optional analog temperature outputs<br />
o Optional USB connectivity<br />
<strong>Spectre</strong>’s Precision Series 2000 Pressure Transducers offer the first<br />
available sensors that are manufactured, designed <strong>and</strong> calibrated to<br />
each customers specific operating conditions. Each transducer output<br />
is digitally mapped to correct for any non-linearities or inaccuracies in<br />
the sensor. This digital correction <strong>and</strong> the inherent advantages of the<br />
fused bond sensor provide the most accurate <strong>and</strong> flexible transducer in<br />
the industry.<br />
Made in the U.S.A.
Model 2000 Barometric Pressure Transducer<br />
Ordering Guide – Example 2000-A-(Baro)-D-1-05-EC1<br />
Please inquire for specials or options<br />
A (Baro) A 1 05 EC1<br />
Pressure Port Range Pressure Output Temp Output Accuracy Connector<br />
A=1/4”MNPT<br />
B=SAE-4<br />
C=other<br />
Baro=24.4” to<br />
34.6” HgA**<br />
(12-17 PSIA)<br />
D=4-20mA<br />
E=0-5VDC<br />
F=0-10VDC<br />
G=RS232<br />
H=RS485<br />
X=Other<br />
UC=USB (computer<br />
powered)***<br />
**Optional ranges available from 16” HgA (lower limit) to 35” HgA (upper limit)<br />
***Analog outputs not available with “UC” pressure output<br />
## USB only used when “UC” pressure output specified.<br />
.<br />
Performance @ 25°C (77°F)<br />
Accuracy: 50 Million<br />
Temperature Range: -55 to 85°C (-65 to 185°F)<br />
Temperature Accuracy: ±1°F (±1/2°C)<br />
Environmental Data<br />
Temperature<br />
Operating: -40 to 85°C (-40 to 185°F)<br />
Storage: -50 to 125°C (-60 to 250°F)<br />
Thermal Limits<br />
Compensated Range: 0 to 55°C (-32 to 130°F)<br />
Temp Comp Zero:
Model 1500 Pressure/Temperature Transducer<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Temperature & Pressure outputs from one transducer.<br />
Eliminate Drift – Fused Bond sensor technology for long-term<br />
stability<br />
Eliminate Noise – Maximum RFI/EMI protection on every transducer<br />
Outputs - 4-20mA, 0-5V & 0-10V – custom outputs available<br />
Pressure ranges 0-1 to 0-30,000 PSI<br />
Accuracies to 0.1% BFSL<br />
Unparalleled long-term stability<br />
Temperature compensation at the sensor element.<br />
Custom designs available (contact factory)<br />
<strong>Spectre</strong>’s Model 1500 transducer incorporates all of the features of the Model 1000 with the addition of a temperature output. It’s<br />
large, raw sensor output (10-70X that of a bonded foil strain gauge device), Long term stability of the Model 1500 <strong>and</strong> st<strong>and</strong>ard<br />
RF!/EMI protection provide the most rugged <strong>and</strong> reliable transducer for industrial applications. Originally designed to withst<strong>and</strong><br />
the rigorous testing requirements of defense <strong>and</strong> space applications, The Model 1500 offers aerospace performance to the<br />
industrial marketplace.<br />
Performance @ 25°C (77°F)<br />
Accuracy:
Model 1500 Pressure/Temperature Transducer<br />
Ordering guide – Example: 1500-A-(0-500PSI)-2-D-5-EC1<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
A (0-500) 2 D 3 5 EC1<br />
Pressure Port Range Units Pressure Temperature Accuracy Connector<br />
Output<br />
Output<br />
A=1/4” MNPT Specify<br />
1=Absolute D=4-20mA 3=Thermocouple 5=0.5% EC1=36” pigtail<br />
B=SAE-4 (w/o-ring) Pressure 2=<strong>Gauge</strong><br />
E=0-5VDC (specify J or K) BFSL* EC2=DIN 43650 with<br />
C=Other<br />
Range in PSI, 3=Vacuum<br />
F=0-10VDC 4=RTD, 100 ohm 2=0.2%<br />
mate-Large<br />
D=1/8” MNPT BAR or kPa 4=Sealed<br />
X=Other<br />
Platinum, 2-wire. 1=0.1% EC3=Mini DIN<br />
E=Autoclave<br />
5=Compound<br />
5=Other<br />
EC4=Bendix 6-pin<br />
F-250-C**<br />
6=Other<br />
EC9=1/2” NPT conduit<br />
connection with 36”<br />
leads<br />
*BFSL = Best Full Scale Line<br />
** Autoclave F-250-C required on ranges above 10,000 PSI<br />
Dimensions<br />
For pressure ranges below 300 PSI, the “L” dimension is 4.20”<br />
Current output wiring Voltage output wiring<br />
Wiring 4-20mA, DIN 43650 Wiring Voltage, DIN 43650<br />
Pin 1 + excitation Pin 1 + excitation<br />
Pin 2 - excitation/signal Pin 2 + excitation/signal<br />
Pin 3 no connection Pin 3 + signal<br />
Pin 4 no connection Pin 4 no connection<br />
Power 9-32 Vdc<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
Wiring 4-20mA, Cable 0-10 Vdc 13-32 Vdc<br />
White + excitation<br />
Black - excitation/signal Wiring Voltage, Cable<br />
Red + excitation<br />
Power 9-32 Vdc Green + signal<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
Black - excitation/signal<br />
White no connection<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
0-10 Vdc 13-32 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 9500 Precision Combination Series<br />
Pressure/Temperature Transducer<br />
o Transmitter is customized to your specific<br />
temperature <strong>and</strong> pressure conditions<br />
o Flexible – Transmitter output can be mapped to<br />
enhance accuracy at any specific Temperature or<br />
Pressure range.<br />
o Multiple Outputs – 4-20mA, 0-5V, 0-10V, RS232<br />
<strong>and</strong> RS485<br />
DESCRIPTION<br />
FEATURES DIMENSIONS<br />
o Proprietary Fused Bond<br />
Sensor<br />
o Accuracies 0.05% - 0.03%<br />
BFSL<br />
o RFI/EMI Protection<br />
o Digital Temperature Correction<br />
at operating conditions<br />
o Sensor Wetted Material<br />
Machined From Solid Stainless<br />
Steel Bar Stock (No Welds)<br />
o Unparalleled Long Term<br />
Stability<br />
o Optional USB Connectivity<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
o Suitable for high shock <strong>and</strong> vibration<br />
applications<br />
o No Silicone oil, no internal o-rings, no<br />
welded diaphragms!<br />
o Ranges 0-10” WC to 30,000 PSI<br />
o <strong>Gauge</strong>, Sealed <strong>Gauge</strong>, Absolute ranges<br />
<strong>Spectre</strong>’s 9500 Precision Series Pressure Transducers offer the first available<br />
sensors that are manufactured, designed <strong>and</strong> calibrated to each customers<br />
specific operating conditions. Each transducer output is digitally mapped<br />
to correct for any non-linearity or inaccuracies in the sensor. This digital<br />
correction <strong>and</strong> the inherent advantages of the fused bond sensor provide the<br />
most accurate <strong>and</strong> flexible transducer in the industry. Additionally, the unit can<br />
be designed for high pressures <strong>and</strong> still retain accuracies in the lower<br />
pressure range (i.e.:10,000 psi sensor can accurately measure below 500<br />
psi), or provide high accuracy in one specific area of the pressure range (i.e.:<br />
500 psi sensor with highest accuracy b<strong>and</strong> between 40-60 psi).<br />
Made in the U.S.A.
Model 9500 Precision Combination Series<br />
Ordering Guide. Example: 9500-A-(0-500)-2-D-1-05-EC1<br />
Please inquire for specials or options.<br />
A (0-500) 2 A 1 05 EC1<br />
Pressure Port Range Units Pressure Temperature Accuracy Connector<br />
Output<br />
Output<br />
A=1/4”MNPT Specify 1=Absolute D=4-20mA 0=No analog 05=0.05%BFSL EC1=36” pigtail<br />
B=SAE-4 Pressure 2=<strong>Gauge</strong> E=0-5Vdc 1=4-20mA 03=0.03% EC2=DIN 43650<br />
C=other Range 3=Vacuum F=10Vdc<br />
2=0-5VDC<br />
with mate. Large<br />
E=Autoclave<br />
4=Sealed G=RS232 3=TC<br />
EC3=Mini DIN<br />
F-250-C<br />
5=Compound H=RS485 4=RTD<br />
EC4=Bendix 6-pin<br />
6=Other X=Other<br />
7=Other<br />
EC9=1/2” MNPT<br />
conduit with<br />
36” leads<br />
ECX=Other<br />
DB9=DB9 for<br />
RS232/485<br />
Performance @ 25°C (77°F)<br />
Accuracy: 50 Million<br />
Temperature Range: -55 to 85°C (-65 to 185°F)<br />
Temperature Accuracy: ±1°F (±1°C)<br />
Environmental Data<br />
Temperature<br />
Operating: -40 to 85°C (-40 to 185°F)<br />
Storage: -50 to 125°C (-60 to 250°F)<br />
Thermal Limits<br />
Compensated Range: -40 to 85°C (-40 to 185°F)<br />
Temp Comp Zero:
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 3000 Hydraulic Pressure Transducer<br />
Designed specifically for applications where high shock <strong>and</strong><br />
vibration are present<br />
Eliminate Drift – Fused Bond Sensor technology for longterm<br />
stability<br />
Sensor wetted material machined from solid stainless steel<br />
bar stock. No Silicone oil fill, no internal o-rings, no welded<br />
diaphragms!<br />
Eliminate Noise – Maximum RFI/EMI protection on every<br />
transducer<br />
Outputs - 4-20mA, 0-5V & 0-10V<br />
Pressure ranges 0-15 to 0-60,000 PSI<br />
Accuracies to 0.04% BFSL<br />
Unparalleled long-term stability<br />
Temperature compensation at the sensor element.<br />
The rugged design of the <strong>Spectre</strong> Model 3000 Hydraulic Series pressure transducer makes it the ideal choice when application<br />
conditions such as high vibration, shock <strong>and</strong> temperature extremes are present. Typical applications for the Model 3000 are<br />
industrial OEM equipment, injection molding, die casting <strong>and</strong> hydraulic systems with pressure spikes or highly cyclic conditions.<br />
Performance @ 25°C (77°F)<br />
Accuracy:
Model 3000 Hydraulic Pressure Transducer<br />
Ordering guide – Example: 3000-A-(0-500PSI)-2-D-25-EC2<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
A (0-500) 2 D 25 EC2<br />
Pressure Port** Range Units Output Accuracy Connector<br />
A=1/4”MNPT<br />
Specify Pressure Range 1=Absolute D=4-20mA<br />
25=0.25%BFSL* EC1=36” pigtail<br />
B=SAE-4<br />
in PSI, BAR or kPa 2=<strong>Gauge</strong> E=0-5VDC<br />
08=0.08% EC2=DIN 43650<br />
C=other<br />
3=Vacuum F=0-10VDC<br />
04=0.04% with mate. Large<br />
D=1/8”MNPT<br />
4=Sealed X=Other<br />
EC3=Mini DIN<br />
E=Autoclave<br />
5=Compound (4-wire, isolated<br />
EC4=Bendix 6-pin<br />
F-250C**<br />
6=Other<br />
versions available-<br />
EC9=1/2” NPT conduit<br />
contact factory<br />
connection w/leads<br />
ECX=Other<br />
*BFSL = Best Full Scale Line<br />
**Must be used on ranges above 0-10,000 PSI<br />
External zero & span adjustments <strong>and</strong> calibration shunt resistor options available. Contact factory.<br />
Dimensions:<br />
Wiring 4-20mA, DIN 43650<br />
Pin 1 + excitation<br />
Pin 2 - excitation/signal<br />
Pin 3 no connection<br />
Pin 4 no connection<br />
Power 9-32 Vdc<br />
Wiring 4-20mA, Cable<br />
White + excitation<br />
Black - excitation/signal<br />
Power 9-32 Vdc<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
Wiring Voltage, DIN 43650<br />
Pin 1 + excitation<br />
Pin 2 + signal<br />
Pin 3 - excitation/signal<br />
Pin 4 no connection<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
0-10 Vdc 13-32 Vdc<br />
Wiring Voltage, Cable<br />
Red + excitation<br />
Green + signal<br />
Black - excitation/signal<br />
White no connection<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
0-10 Vdc 13-32 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
Model S150 Sanitary Series<br />
Pressure/Temperature Transducer<br />
o Transmitter is customized to your specific<br />
temperature <strong>and</strong> pressure conditions<br />
o All Welded Stainless Steel Construction<br />
o 4-20mA, 0-5V, 0-10V, TC <strong>and</strong> RTD Outputs.<br />
FEATURES DIMENSIONS<br />
o Proprietary Fused Bond<br />
Sensor<br />
o Accuracies 0.5% - 0.1% BFSL<br />
o RFI/EMI Protection<br />
o Temperature Compensation at<br />
sensor element<br />
o All Welded Stainless Steel<br />
Construction<br />
o Unparalleled Long Term<br />
Stability<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
o Suitable for high shock <strong>and</strong> vibration<br />
applications<br />
o Ranges 0-5 PSI to 1,000 PSI<br />
o Gage, Sealed Gage, Absolute<br />
o Accuracies to 0.1% BFSL<br />
DESCRIPTION<br />
<strong>Spectre</strong>’s Sanitary D150 Series Pressure Transducers offer the first available<br />
sensors that are manufactured, designed <strong>and</strong> calibrated to each customers<br />
specific operating conditions. The Model S150 contains no internal O-rings<br />
making it ideal for critical pharmaceutical <strong>and</strong> chemical applications where<br />
product contamination is unacceptable.<br />
Made in the U.S.A.
Model S150 Sanitary Series<br />
Pressure/Temperature Transducer<br />
Ordering Guide. Example: S150-A-(0-500)-2-D-4-5-EC1<br />
Please inquire for specials or options<br />
A (0-500) 2 A 1 5 EC1<br />
Tri-Clover<br />
Pressure Port<br />
Range Units Pressure<br />
Output<br />
Temperature<br />
Output Accuracy<br />
Connector<br />
C=1.5”<br />
D=2”<br />
E=2.5”<br />
F=3”<br />
Specify<br />
Pressure<br />
Range<br />
1=Absolute<br />
2=<strong>Gauge</strong><br />
3=Vacuum<br />
4=Sealed<br />
5=Compound<br />
6=Other<br />
Performance @ 25°C (77°F)<br />
Accuracy(1): 50 Million<br />
Temperature Range: -55 to 125°C (-65 to 250°F)<br />
Temperature Accuracy: ±1°F (±1°C)<br />
Environmental Data<br />
Temperature<br />
Operating: -40 to 85°C (-40 to 185°F)<br />
Storage: -50 to 125°C (-60 to 250°F)<br />
Thermal Limits<br />
Compensated Range: 0 to 55°C (-30 to 130°F)<br />
Temp Comp Zero:
Model S950 Precision Sanitary Series<br />
Pressure/Temperature Transducer<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Transducer is customized to your specific temperature <strong>and</strong><br />
pressure conditions.<br />
Maximum RF!/EMI protection supplied as st<strong>and</strong>ard<br />
All welded stainless steel construction<br />
Outputs - 4-20mA, 0-5V, 0-10V, TC, RTD, RS232, RS485, USB 2.0<br />
Pressure ranges 0-5 to 0-1,000 PSI<br />
Accuracies to 0.03% BFSL<br />
Unparalleled long-term stability<br />
Temperature compensation at the sensor element.<br />
Custom designs available (contact factory)<br />
<strong>Spectre</strong>’s S950 Sanitary Series Pressure Transducers offer the first available sensors that are manufactured, designed <strong>and</strong> calibrated to each<br />
customers specific operating conditions. The Model S950 is ideal for critical pharmaceutical <strong>and</strong> chemical applications where product<br />
contamination is unacceptable.<br />
Each Model S950 transducer output is digitally mapped to correct for any non-linearity or inaccuracies in the sensor.<br />
Performance @ 25°C (77°F)<br />
Accuracy:
Model S950 Precision Sanitary Series<br />
Pressure/Temperature Transducer<br />
Ordering guide – Example: S950-D-(0-500PSI)-2-D-1-05-EC1<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
D (0-500) 2 D 1 5 EC1<br />
Pressure Port Range Units Pressure<br />
Temperature Accuracy Connector<br />
Output<br />
Output<br />
BFSL*<br />
C=1.5”<br />
Specify<br />
1=Absolute D=4-20mA<br />
0=None<br />
05=0.05% EC1=36” pigtail<br />
D=2”<br />
Pressure 2=<strong>Gauge</strong> E=0-5VDC<br />
1=4-20mA<br />
03=0.03% EC2=DIN 43650 with<br />
E=2.5”<br />
Range in PSI, 3=Vacuum F=0-10VDC 2=0-5VDC<br />
mate-Large<br />
F=3”<br />
BAR or kPa 4=Sealed G=RS232<br />
3=Thermocouple<br />
EC3=Mini DIN<br />
5=Compound H=RS485<br />
(specify J or K)<br />
EC4=Bendix 6-pin<br />
6=Other UC=USB 2.0 4=RTD, 100 ohm<br />
EC9=1/2” NPT conduit<br />
X=Other<br />
Platinum, 2-wire.<br />
connection with 36”<br />
X=Other<br />
leads<br />
UA=USB “A” male with<br />
4’ cable<br />
*BFSL = Best Full Scale Line<br />
Dimensions<br />
Typical wiring configurations. Exact wiring info supplied with calibration sheet<br />
Current output wiring Voltage output wiring<br />
Wiring 4-20mA, DIN 43650 Wiring Voltage, DIN 43650<br />
Pin 1 + excitation Pin 1 + excitation<br />
Pin 2 - excitation/signal Pin 2 - excitation/signal<br />
Pin 3 no connection Pin 3 + signal<br />
Pin 4 no connection Pin 4 no connection<br />
Power 9-32 Vdc<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
Wiring 4-20mA, Cable 0-10 Vdc 13-32 Vdc<br />
White + excitation<br />
Black - excitation/signal Wiring Voltage, Cable<br />
Red + excitation<br />
Power 9-32 Vdc Green + signal<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
10/15/07<br />
Black - excitation/signal<br />
White no connection<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
0-10 Vdc 13-32 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
Model D150 Differential Series<br />
Pressure/Temperature Transducer.<br />
o Transmitter is customized to your specific<br />
temperature <strong>and</strong> pressure conditions<br />
o Flexible – Transmitter output can be mapped to<br />
enhance accuracy at any specific Temperature or<br />
Pressure range.<br />
o Multiple Outputs – TC, RTD, 4-20mA, 0-5V, & 0-<br />
10V<br />
FEATURES DIMENSIONS<br />
o Proprietary Fused Bond<br />
Sensor<br />
o Accuracies 0.5% - 0.1% BFSL<br />
o RFI/EMI Protection<br />
o Digital Temperature Correction<br />
at operating conditions<br />
o Sensor Wetted Material<br />
Machined From Solid Stainless<br />
Steel Bar Stock (No Welds)<br />
o Unparalleled Long Term<br />
Stability<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
o Suitable for high shock <strong>and</strong> vibration<br />
applications<br />
o No Silicone oil, no internal o-rings, no<br />
welded diaphragms!<br />
o Ranges 0-5 PSID to 1,000 PSID<br />
DESCRIPTION<br />
<strong>Spectre</strong>’s Differential Series Pressure Transducers offer the first<br />
available sensors that are manufactured, designed <strong>and</strong> calibrated to<br />
each customers specific operating conditions. The model D150 offers<br />
wet/wet differential pressure measurements of gases <strong>and</strong> liquids<br />
compatible with stainless steel. The compact size contains no internal<br />
O-rings or fluid filled cavities, making it ideal for water management,<br />
gas pipeline instrumentation, filtration, natural gas compressors <strong>and</strong><br />
many other applications. In the event that either pressure port is at full<br />
line pressure <strong>and</strong> the other at zero, no damage will be done to the<br />
transducer/transmitter.<br />
Made in the U.S.A.
Model D150 Differential Series<br />
Pressure/Temperature Transducer.<br />
Ordering Guide. Example: D150-A-(0-500)-D-3-5-EC1<br />
Please inquire for specials or options<br />
A (0-500) D 3 5 EC1<br />
Pressure Range Pressure Temperature Accuracy Connector<br />
Port<br />
Output Output<br />
A=1/4”MNPT Specify D=4-20mA 0=None 5=0.5%BFSL EC1=36” pigtail<br />
B=Other w/ Pressure E=0-5Vdc 3=TC<br />
2=0.25% EC2=DIN 43650<br />
adaptors Range. F=0-10Vdc 4=RTD 1=0.1%*<br />
with mate (large)<br />
0-5 psiD to X=Other 5=Other<br />
EC3=Mini DIN 43650<br />
0-1,000 psiD<br />
EC9=1/2” NPT conduit<br />
with wiring leads<br />
ECX=Other<br />
Performance @ 25°C (77°F)<br />
Accuracy(1):
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
Model D950 Precision Differential Series<br />
Pressure/Temperature Transducer.<br />
o Transmitter is customized to your specific<br />
temperature <strong>and</strong> pressure conditions<br />
o Flexible – Transmitter output can be mapped to<br />
enhance accuracy at any specific Temperature or<br />
Pressure range.<br />
o Multiple Outputs – TC, RTD, 4-20mA, 0-5V, 0-10V,<br />
RS232, RS485 <strong>and</strong> USB 2.0<br />
DESCRIPTION<br />
FEATURES DIMENSIONS<br />
o Proprietary Fused Bond<br />
Sensor<br />
o Accuracies 0.05%- 0.03% BFSL<br />
o RFI/EMI Protection<br />
o Digital Temperature Correction<br />
at operating conditions<br />
o Sensor Wetted Material<br />
Machined From Solid Stainless<br />
Steel Bar Stock (No Welds)<br />
o Unparalleled Long Term<br />
Stability<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
o Suitable for high shock <strong>and</strong> vibration<br />
applications<br />
o No Silicone oil, no internal o-rings, no<br />
welded diaphragms!<br />
o Ranges 0-5 PSID to 1,000 PSID<br />
<strong>Spectre</strong>’s D950 Differential Series Pressure Transducers offer the first<br />
available sensors that are manufactured, designed <strong>and</strong> calibrated to each<br />
customers specific operating conditions. Each transducer output is digitally<br />
mapped to correct for any non-linearity or inaccuracies in the sensor. The<br />
model D950 offers wet/wet differential pressure measurements of gases <strong>and</strong><br />
liquids compatible with stainless steel. The compact size contains no internal<br />
O-rings or fluid filled cavities, making it ideal for water management, gas<br />
pipeline instrumentation, filtration, natural gas compressors <strong>and</strong> many other<br />
applications. In the event that either pressure port is at full line pressure <strong>and</strong><br />
the other at zero, no damage will be done to the transducer/transmitter.<br />
Made in the U.S.A.
Model D950 Precision Differential Series<br />
Pressure/Temperature Transducer.<br />
Ordering Guide. Example: D950-A-(0-50)-D-1-05-EC1<br />
Please inquire for specials or options.<br />
A (0-50) D 1 5 EC1<br />
Pressure Port Range Pressure Temperature Accuracy Connector<br />
Output<br />
Output<br />
A=1/4”MNPT Specify D=4-20mA<br />
0=None 05=0.05% BFSL EC1=36” pigtail<br />
B=Other w/ Pressure E=0-5Vdc<br />
1=4-20mA 03=0.03% BFSL EC2=DIN 43650<br />
adaptors Range. F=10Vdc<br />
2=0-5VDC<br />
with mate. Large<br />
0-5 psiD to G=RS232<br />
3=TC<br />
EC3=Mini DIN<br />
0-1,000 psiD H=RS485<br />
4=RTD<br />
ECX=Other<br />
UC=USB 2.0* 7=Other<br />
UA=USB “A” connector<br />
with 4’ cable<br />
*No analog outputs available with UC option<br />
Performance @ 25°C (77°F)<br />
Accuracy(1): 50 Million<br />
Temperature Range: -55 to 85°C (-65 to 185°F)<br />
Temperature Accuracy: ±1°F (±1°C)<br />
Environmental Data<br />
Temperature<br />
Operating: -40 to 85°C (-40 to 185°F)<br />
Storage: -50 to 125°C (-60 to 250°F)<br />
Thermal Limits<br />
Compensated Range: 0 to 55°C (-32 to 130°F)<br />
Temp Comp Zero:
Actual size<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 80S Submersible Pressure Transducer<br />
Compact size perfect for most installations<br />
Outputs: 4-20mA <strong>and</strong> mV/V<br />
Pressure ranges 0-5, 0-10 <strong>and</strong> 0-15 PSIG<br />
Accuracies of 1.0%, 0.5%, 0.2% <strong>and</strong> 0.1%<br />
Long-term stability<br />
316 stainless steel construction<br />
Designed for hazardous area installation<br />
(intrinsic safety barrier required – approvals<br />
pending)<br />
Performance @ 25°C (77°F)<br />
Accuracy: ±1.0% BFSL (optional 0.5%, 0.2% <strong>and</strong> 0.1%)<br />
Stability: 50 Million<br />
Environmental Data<br />
Operating temp: -20 to +80°C (-40 to +176°F)<br />
Storage temp: -50 to +125°C (-60 to +250°F)<br />
Compensated range: 0 to 55°C (+32 to +130°F)<br />
Electrical Data<br />
Excitation:<br />
9-29 Vdc for 4-20mA<br />
10 Vdc for mV/V output (5 mV/V for 5 PSI units)<br />
(10mV/V for >5 PSI units)<br />
Electrical rating: IEC Ex ia IIC T5 – Nema 6P<br />
Loop resistance @ 24 Vdc: 500 Ohm<br />
Zero offset:
Ordering information:<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 80S Submersible Pressure Transducer<br />
Part number Description Output Cable<br />
80S054250-1 Stainless steel construction, bullet nose, 0-5 PSIG, 1% BFSL 4-20mA 50 Ft<br />
80S054250-5 Stainless steel construction, bullet nose, 0-5 PSIG, 0.5% BFSL 4-20mA 50 Ft<br />
80S054250-2 Stainless steel construction, bullet nose, 0-5 PSIG, 0.2% BFSL 4-20mA 50 Ft<br />
80S054250-01 Stainless steel construction, bullet nose, 0-5 PSIG, 0.1% BFSL 4-20mA 50 Ft<br />
80S104250-1 Stainless steel construction, bullet nose, 0-10 PSIG, 1% BFSL 4-20mA 50 Ft<br />
80S104250-5 Stainless steel construction, bullet nose, 0-10 PSIG, 0.5% BFSL 4-20mA 50 Ft<br />
80S104250-2 Stainless steel construction, bullet nose, 0-10 PSIG, 0.2% BFSL 4-20mA 50 Ft<br />
80S104250-01 Stainless steel construction, bullet nose, 0-10 PSIG, 0.1% BFSL 4-20mA 50 Ft<br />
80S154250-1 Stainless steel construction, bullet nose, 0-15 PSIG, 1% BFSL 4-20mA 50 Ft<br />
80S154250-5 Stainless steel construction, bullet nose, 0-15 PSIG, 0.5% BFSL 4-20mA 50 Ft<br />
80S154250-2 Stainless steel cons truction, bullet nose, 0-15 PSIG, 0.2% BFSL 4-20mA 50 Ft<br />
80S154250-01 Stainless steel construction, bullet nose, 0-15 PSIG, 0.1% BFSL 4-20mA 50 Ft<br />
80S154280-1 Stainless steel construction, bullet nose, 0-15 PSIG, 1% BFSL 4-20mA 80 Ft.<br />
80S154280-5 Stainless steel construction, bullet nose, 0-15 PSIG, 0.5% BFSL 4-20mA 80 Ft.<br />
80S154280-2 Stainless steel construction, bullet nose, 0-15 PSIG, 0.2% BFSL 4-20mA 80 Ft.<br />
80S154280-01 Stainless steel construction, bullet nose, 0-15 PSIG, 0.1% BFSL 4-20mA 80 Ft.<br />
80S05MV50-1 Stainless steel construction, bullet nose, 0-5 PSIG, 1% BFSL 5mV/V 50 Ft<br />
80S05MV50-5 Stainless steel construction, bullet nose, 0-5 PSIG, 0.5% BFSL 5mV/V 50 Ft<br />
80S05MV50-2 Stainless steel construction, bullet nose, 0-5 PSIG, 0.2% BFSL 5mV/V 50 Ft<br />
80S05MV50-01 Stainless steel construction, bullet nose, 0-5 PSIG, 0.1% BFSL 5mV/V 50 Ft<br />
80S10MV50-1 Stainless steel construction, bullet nose, 0-10 PSIG, 1% BFSL 10mV/V 50 Ft<br />
80S10MV50-5 Stainless steel construction, bullet nose, 0-10 PSIG, 0.5% BFSL 10mV/V 50 Ft<br />
80S10MV50-2 Stainless steel construction, bullet nose, 0-10 PSIG, 0.2% BFSL 10mV/V 50 Ft<br />
80S10MV50-01 Stainless steel construction, bullet nose, 0-10 PSIG, 0.1% BFSL 10mV/V 50 Ft<br />
80S15MV50-1 Stainless steel construction, bullet nose, 0-15 PSIG, 1% BFSL 10mV/V 50 Ft<br />
80S15MV50-5 Stainless steel construction, bullet nose, 0-15 PSIG, 0.5% BFSL 10mV/V 50 Ft<br />
80S15MV50-2 Stainless steel construction, bullet nose, 0-15 PSIG, 0.2% BFSL 10mV/V 50 Ft<br />
80S15MV50-01 Stainless steel construction, bullet nose, 0-15 PSIG, 0.1% BFSL 10mV/V 50 Ft<br />
Dimensions:<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
Dimensions subject to change with options<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 80T Titanium Submersible Pressure Transducer<br />
Compact size perfect for most<br />
installations<br />
4-20mA Output<br />
Pressure ranges 0-5, 0-10 <strong>and</strong> 0-15 PSIG<br />
Accuracies of 1.0%, 0.5% <strong>and</strong> 0.2%<br />
available. (0.1% on application)<br />
Long-term stability<br />
Titanium construction for corrosive<br />
service<br />
Designed for hazardous area installation<br />
(intrinsic safety barrier required –<br />
approvals pending)<br />
Performance @ 25°C (77°F)<br />
Accuracy: ±1.0% BFSL (optional 0.5%, 0.2%, 0.1%)<br />
Stability: 50 Million<br />
Environmental Data<br />
Operating temp: -20 to +80°C (-40 to +176°F)<br />
Storage temp: -50 to +125°C (-60 to +250°F)<br />
Compensated range: 0 to 55°C (+32 to +130°F)<br />
Electrical Data<br />
Supply voltage: 9-29 Vdc for 4-20mA<br />
Electrical rating: IEC Ex ia IIC T5 – Nema 4X<br />
Loop resistance @ 24 Vdc: 500 Ohm<br />
Zero offset:
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 80T Titanium Submersible Pressure Transducer<br />
Ordering information:<br />
Part number Description Output Cable<br />
80T054250-1 Titanium construction, bullet nose, 0-5 PSIG, 1% BFSL 4-20mA 50 Ft<br />
80T054250-5 Titanium construction, bullet nose, 0-5 PSIG, 0.5% BFSL 4-20mA 50 Ft<br />
80T054250-2 Titanium construction, bullet nose, 0-5 PSIG, 0.2% BFSL 4-20mA 50 Ft<br />
80T104250-1 Titanium construction, bullet nose, 0-10 PSIG, 1% BFSL 4-20mA 50 Ft<br />
80T104250-5 Titanium construction, bullet nose, 0-10 PSIG, 0.5% BFSL 4-20mA 50 Ft<br />
80T104250-2 Titanium construction, bullet nose, 0-10 PSIG, 0.2% BFSL 4-20mA 50 Ft<br />
80T154250-1 Titanium construction, bullet nose, 0-15 PSIG, 1% BFSL 4-20mA 50 Ft<br />
80T154250-5 Titanium construction, bullet nose, 0-15 PSIG, 0.5% BFSL 4-20mA 50 Ft<br />
80T154250-2 Titanium construction, bullet nose, 0-15 PSIG, 0.2% BFSL 4-20mA 50 Ft<br />
Optional accuracy of 0.1% available – Consult factory for availability<br />
Dimensions:<br />
Typical Applications:<br />
• Ground Water<br />
Monitoring<br />
• Wet-well<br />
Monitoring<br />
• Ocean research<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
• Soil remediation<br />
• Level Control<br />
• Surface Water<br />
Monitoring<br />
Dimensions subject to change with options<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
Actual appearance may vary slightly<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 80A Submersible Pressure Transducer<br />
Flush diaphragm transducer with debris<br />
avoidance st<strong>and</strong>-off<br />
4-20mA output<br />
Pressure ranges 0-5, 0-10 <strong>and</strong> 0-15 PSIG<br />
Accuracies of 1.0%, 0.5% <strong>and</strong> 0.2% available<br />
(0.1% on application)<br />
Long-term stability<br />
316 stainless steel construction<br />
Designed for hazardous area installation<br />
(intrinsic safety barrier required – approvals<br />
pending)<br />
Performance @ 25°C (77°F)<br />
Accuracy: ±1.0% BFSL (optional 0.5%, 0.2% <strong>and</strong> 0.1%)<br />
Stability: 50 Million<br />
Environmental Data<br />
Operating temp: -20 to +80°C (-40 to +176°F)<br />
Storage temp: -50 to +125°C (-60 to +250°F)<br />
Compensated range: 0 to 55°C (+32 to +130°F)<br />
Electrical Data<br />
Excitation: 9-29 Vdc for 4-20mA<br />
Electrical rating: IEC Ex ia IIC T5 – Nema 6P<br />
Loop resistance @ 24 Vdc: 500 Ohm<br />
Zero offset:
Ordering information:<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 80A Submersible Pressure Transducer<br />
Part number Description Output Cable<br />
80A054250-1 Stainless steel construction, debris st<strong>and</strong>-off, 0-5 PSIG, 1% BFSL 4-20mA 50 Ft<br />
80A054250-5 Stainless steel construction, debris st<strong>and</strong>-off, 0-5 PSIG, 0.5% BFSL 4-20mA 50 Ft<br />
80A054250-2 Stainless steel construction, debris st<strong>and</strong>-off, 0-5 PSIG, 0.2% BFSL 4-20mA 50 Ft<br />
80A104250-1 Stainless steel construction, debris st<strong>and</strong>-off, 0-10 PSIG, 1% BFSL 4-20mA 50 Ft<br />
80A104250-5 Stainless steel construction, debris st<strong>and</strong>-off, 0-10 PSIG, 0.5% BFSL 4-20mA 50 Ft<br />
80A104250-2 Stainless steel construction, debris st<strong>and</strong>-off, 0-5 PSIG, 0.2% BFSL 4-20mA 50 Ft<br />
80A154250-1 Stainless steel construction, debris st<strong>and</strong>-off, 0-15 PSIG, 1% BFSL 4-20mA 50 Ft<br />
80A154250-5 Stainless steel construction, debris st<strong>and</strong>-off, 0-15 PSIG, 0.5% BFSL 4-20mA 50 Ft<br />
80A154250-2 Stainless steel construction, debris st<strong>and</strong>-off, 0-15 PSIG, 0.2% BFSL 4-20mA 50 Ft<br />
Optional accuracy of 0.1% available – Consult factory for availability<br />
Dimensions:<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
Dimensions subject to change with options<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
Model 88 Submersible Transducer<br />
Performance @ 25°C (77°F)<br />
Accuracy:
Model 88 Submersible Transducer<br />
Ordering guide – Example: 88-A-(0-15 PSIG)-2-D-5-SCV<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
A (0-15 PSIG) 2 D 1 SCV<br />
Pressure Port Range Units Output 1 Connector<br />
A=1/4” MNPT Specify pressure 1=Absolute D=4-20mA 5=0.5% BFSL SCV= Vented cable**<br />
B=Nose cone range in feet 2=<strong>Gauge</strong><br />
E=0-5VDC 2=0.2% BFSL SCN=Non-vented<br />
C=Other<br />
(meters) water, (vented cable) F=0-10VDC 1=0.1% BFSL Cable**<br />
PSI or BAR 4=Sealed<br />
6=Other<br />
M=mV/V<br />
ECX=Other<br />
(Units supplied with<br />
½” MNPT conduit<br />
connections as<br />
st<strong>and</strong>ard)<br />
** St<strong>and</strong>ard cable jacket is Kynar. Hytrel available on request – contact factory.<br />
Dimensions:<br />
(For refence only. Actual dimensions <strong>and</strong> configuration may vary. St<strong>and</strong>ard configuration includes ½” MNPT conduit connection)<br />
Wiring 4-20mA, Cable<br />
Red + excitation<br />
Black - excitation/signal<br />
Power 9-32 Vdc<br />
Typical Applications:<br />
• Ground Water<br />
Monitoring<br />
• Wet-well<br />
Monitoring<br />
• Ocean research<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44145<br />
www.spectresensors.com<br />
• Soil remediation<br />
• Level Control<br />
• Surface Water<br />
Monitoring<br />
Wiring Voltage, Cable<br />
Red + excitation<br />
Green + signal<br />
Black - excitation/signal<br />
White no connection<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
0-10 Vdc 13-32 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
Model 881 Submersible Transducer<br />
Performance @ 25°C (77°F)<br />
Accuracy:
Model 881 Submersible Transducer<br />
Ordering guide – Example: 881-A-(0-15 PSIG)-2-D-5-SCV<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
A (0-15 PSIG) 2 D 1 SCV<br />
Pressure Port Range Units Output 1 Connector<br />
A=Debris st<strong>and</strong>-off Specify pressure 1=Absolute D=4-20mA 5=0.5% BFSL SCV= Vented cable**<br />
range in feet 2=<strong>Gauge</strong><br />
E=0-5VDC 2=0.2% BFSL SCN=Non-vented<br />
(meters) water, (vented cable) F=0-10VDC 1=0.1% BFSL Cable**<br />
PSI or BAR 4=Sealed<br />
6=Other<br />
M=mV/V<br />
ECX=Other<br />
(Units supplied with<br />
½” MNPT conduit<br />
connections as<br />
st<strong>and</strong>ard)<br />
** St<strong>and</strong>ard cable jacket is Kynar. Hytrel available on request – contact factory.<br />
Dimensions:<br />
(For reference only. Actual dimensions <strong>and</strong> configuration may vary. St<strong>and</strong>ard configuration includes ½” MNPT conduit connection)<br />
Wiring 4-20mA, Cable<br />
Red + excitation<br />
Black - excitation/signal<br />
Power 9-32 Vdc<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44145<br />
www.spectresensors.com<br />
Wiring Voltage, Cable<br />
Red + excitation<br />
Green + signal<br />
Black - excitation/signal<br />
White no connection<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
0-10 Vdc 13-32 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 8000 Precision Submersible Transducer<br />
Transducer is customized to your specific temperature<br />
<strong>and</strong> pressure conditions<br />
Outputs: 4-20mA, 0-5 Vdc, 0-10 Vdc, mv/V. Optional<br />
RS232/RS485 or USB communications<br />
Pressure ranges 0-10” WC to 500 PSI<br />
St<strong>and</strong>ard accuracy of 0.05% BFSL (optional 0.03%)<br />
Built-in, proprietary design, lightning <strong>and</strong> surge<br />
protection supplied as st<strong>and</strong>ard<br />
Unparalleled long-term stability<br />
Digital temperature correction at operating conditions<br />
Proprietary digital “AutoZero” / recalibration mode<br />
Field rangeable 5:1<br />
<strong>Spectre</strong>’s Series 8000 Submersible Transducers offers the first available submersible sensors that are designed, manufactured<br />
<strong>and</strong> calibrated to each application’s specific operating conditions. Each transducer’s output is digitally mapped to correct for<br />
any non-linearity or inaccuracies in the sensing element. This digital correction provides the most accurate <strong>and</strong> flexible<br />
submersible transducer in the industry.<br />
Performance @ 25°C (77°F)<br />
Accuracy:
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 8000 Precision Submersible Transducer<br />
Ordering guide – Example: 8000-A-(0-15 PSIG)-2-D-05-SCV<br />
A (0-15PSIG) 2 D 05 SCV<br />
Pressure Port Range Units Output Accuracy Connector<br />
A=1/4” MNPT Specify pressure 1=Absolute<br />
D=4-20mA** 05=0.05% BFSL* SCV= ½” MNPT with<br />
B=Nose cone range in:<br />
2=<strong>Gauge</strong> (vented cable) E=0-5VDC 03=0.03% BFSL* Vented Cable**<br />
C=Other<br />
inches (mm) water, 4=Sealed<br />
F=0-10VDC<br />
SCN= ½” MNPT with<br />
feet (meters) water, 6=Other<br />
G=RS232**<br />
Non-vented cable**<br />
PSI or BAR<br />
H=RS485**<br />
UC=USB 2.0<br />
X=Other<br />
ECX=Other<br />
* BFSL = Best Fit Straight Line<br />
**Combination 4-20mA + Comms available – contact factory for details<br />
*** St<strong>and</strong>ard cable jacket is Kynar. Others available on request – contact factory.<br />
Dimensions:<br />
Wiring 4-20mA, Cable<br />
White + excitation<br />
Black - excitation/signal<br />
Power 6-32 Vdc<br />
Typical Applications:<br />
• Ground Water<br />
Monitoring<br />
• Wet-well<br />
Monitoring<br />
• Ocean research<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
• Soil remediation<br />
• Level Control<br />
• Surface Water<br />
Monitoring<br />
Wiring Voltage, Cable<br />
Red + excitation<br />
Green + signal<br />
Black - excitation/signal<br />
White no connection<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
0-10 Vdc 13-32 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 8100 ANCHOR Submersible Transducer<br />
Transducer is customized to your specific temperature <strong>and</strong><br />
pressure conditions<br />
Outputs: 4-20mA, 0-5 Vdc, 0-10 Vdc. Optional RS232, RS485<br />
<strong>and</strong> USB 2.0<br />
Pressure ranges – 0-1 PSI to 500 PSI<br />
St<strong>and</strong>ard accuracy of 0.10% BFSL (optional 0.05%)<br />
Flow-through st<strong>and</strong>off design for problem applications<br />
Built-in, proprietary design, lightning <strong>and</strong> surge protection<br />
supplied as st<strong>and</strong>ard<br />
Unparalleled long-term stability<br />
Digital temperature correction at operating conditions<br />
Proprietary digital “AutoZero” / recalibration mode (optional)<br />
Field rangeable 5:1 (optional)<br />
<strong>Spectre</strong>’s “ANCHOR” (Model 8100) submersible series of industrial pressure transducers is specifically designed to operate in<br />
applications that are problematic for traditional submersible level transmitters. The conditions encountered in many process<br />
sumps, sewage wet-wells <strong>and</strong> dirty applications may cause plugging <strong>and</strong> erroneous readings with st<strong>and</strong>ard designs. The<br />
ANCHOR has an oversized diaphragm <strong>and</strong> flow-through st<strong>and</strong>off which helps to prevent clogging <strong>and</strong> build-up which may cause<br />
inaccuracies . In addition, each transducer’s output is digitally mapped to correct for any non-linearity or inaccuracies in<br />
the sensing element. This digital correction provides the most accurate <strong>and</strong> flexible submersible transducer in the industry.<br />
Performance @ 25°C (77°F)<br />
Accuracy:
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 8100 ANCHOR Submersible Transducer<br />
Ordering guide – Example: 8100-A-(0-15 PSI)-2-D-05-SCV<br />
A (0-15 PSI) 2 D 05 SCV<br />
Pressure Port Range Units Output Accuracy Connector<br />
A=Anchor Specify pressure range in: 1=Absolute D=4-20mA** 1=0.10% BFSL* SCV= ½” MNPT with<br />
inches (mm) water, 2=<strong>Gauge</strong> (vented E=0-5VDC 05=0.05% BFSL* Vented Cable***<br />
feet (meters) water,<br />
cable) F=0-10VDC<br />
SCN= ½” MNPT w ith<br />
PSI or BAR<br />
4=Sealed G=RS232**<br />
Non-vented cable***<br />
6=Other<br />
H=RS485**<br />
UC=USB 2.0<br />
X=Other<br />
ECX=Other<br />
* BFSL= Best Fit Straight Line<br />
**Combination 4-20mA + Comms available – contact factory for details<br />
*** St<strong>and</strong>ard cable jacket is Kynar. Others available on request – contact factory.<br />
Dimensions:<br />
Wiring 4-20mA, Cable<br />
White + excitation<br />
Black - excitation/signal<br />
Power 6-32 Vdc<br />
Typical Applications:<br />
• Ground Water<br />
Monitoring<br />
• Wet-well<br />
Monitoring<br />
• Ocean research<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
• Soil remediation<br />
• Level Control<br />
• Surface Water<br />
Monitoring<br />
Wiring Voltage, Cable<br />
Red + excitation<br />
Green + signal<br />
Black - excitation/signal<br />
White no connection<br />
Output Power<br />
0-5 Vdc 9-32 Vdc<br />
0-10 Vdc 13-32 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 8600 Tentacle Thin-Profile Submersible<br />
Transducer<br />
Transducer is customized to your specific temperature <strong>and</strong><br />
pressure conditions<br />
Outputs: 4-20mA, mV/V. Optional RS232<br />
Pressure ranges – 0-10” WC to 500 PSI<br />
St<strong>and</strong>ard accuracy of 0.05% BFSL (optional 0.03%)<br />
Narrow body profile perfect for wet-well <strong>and</strong> “down-hole”<br />
service<br />
Built-in, proprietary design, lightning <strong>and</strong> surge protection<br />
supplied as st<strong>and</strong>ard<br />
Unparalleled long-term stability<br />
Digital temperature correction at operating conditions<br />
Proprietary digital “AutoZero” / recalibration mode<br />
Field rangeable 5:1 (optional)<br />
<strong>Spectre</strong>’s Series 8600 Submersible Transducers offers the first available submersible sensors that are designed, manufactured<br />
<strong>and</strong> calibrated to each application’s specific operating conditions. Each transducer’s output is digitally mapped to correct for<br />
any non-linearity or inaccuracies in the sensing element. This digital correction provides the most accurate <strong>and</strong> flexible<br />
submers ible transducer in the industry.<br />
Performance @ 25°C (77°F)<br />
Accuracy:
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model 8600 Tentacle Thin-Profile Submersible<br />
Transducer<br />
Ordering guide – Example: 8600-9-(0-20”WC)-2-D-05-SCV<br />
A (0-20”WC) 2 D 05 SCV<br />
Pressure Port Range Units Output Accuracy Connector<br />
9=9/16-18 UNF Specify pressure range in: 1=Absolute D=4-20mA** 05=0.05% BFSL* SCV=Vented Cable**<br />
Thread inches (mm) water, 2=<strong>Gauge</strong> (vented G=RS232** 03=0.03% BFSL* SCN= Non-vented<br />
B=Nose cone feet (meters) water,<br />
cable) M=mV/V<br />
cable**<br />
C=Other<br />
PSI or BAR<br />
4=Sealed<br />
6=Other<br />
ECX=Other<br />
* BFSL = Best Fit Straight Line<br />
** Combination 4-20mA + Comms available – contact factory for details<br />
*** St<strong>and</strong>ard cable jacket is Kynar. Others available on request – contact factory.<br />
Dimensions:<br />
Typical Applications:<br />
• Ground Water<br />
Monitoring<br />
• Wet-well<br />
Monitoring<br />
• Ocean research<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
• Soil remediation<br />
• Level Control<br />
• Surface Water<br />
Monitoring<br />
Available accessories:<br />
• Aneroid bellows<br />
• Cable hangers<br />
• Dessicant filters<br />
• Junction boxes<br />
• Power supplies<br />
Wiring 4-20mA, Cable<br />
White + excitation<br />
Black - excitation/signal<br />
Power 6-32 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
SeaLevel 8700 Deep Water Submersible<br />
Transducer is custom built to your specific temperature,<br />
pressure <strong>and</strong> corrosion conditions.<br />
Transducer output is digitally mapped to enhance<br />
accuracy at any specific temperature or pressure range.<br />
Outputs - 4-20mA, 0-5V & 0-10V, RS232/RS485.<br />
Pressure ranges to 0-30,000 Feet of Water<br />
Accuracies to 0.03% BFSL<br />
Unparalleled long-term stability.<br />
Built-in voltage surge protection.<br />
No silicone oils, no internal o-rings, no welded<br />
diaphragms.<br />
Available with Impulse®, SeaCon® or customer specified<br />
electrical connectors.<br />
<strong>Spectre</strong>’s SeaLevel 8700 Submersible Transducers are specifically engineered for maximum corrosion resistance <strong>and</strong> the high<br />
depth pressures encountered in deep sea applications. The 8700 SeaLevel is manufactured, designed <strong>and</strong> calibrated to each<br />
customer’s specific operating conditions. Each transducer output is digitally mapped to correct for any non-linearity or<br />
inaccuracies in the sensor. This digital correction <strong>and</strong> the inherent advantages of the one-piece, fused bond sensor provide the<br />
most accurate <strong>and</strong> flexible transducer in the industry.<br />
Typical Specifications (all transducers custom built to client’s requirements)<br />
Performance @ 25°C (77°F)<br />
Accuracy:
<strong>Spectre</strong> <strong>Sensors</strong><br />
SeaLevel 8700 Deep Water Submersible<br />
Typical Model Number: 8700-A-(0-2000FT)-2-D-05-ECS<br />
(contact factory with your requirements for exact model)<br />
Typical options are shown but not limited to this selection. 8700 Series transducers are custom built to meet the client’s requirements.<br />
Please contact factory for complete details<br />
A (0-500) 2 D 5 EC1<br />
Pressure Port Range Units Output Accuracy Connector<br />
A=1/4” MNPT Specify Pressure 2=<strong>Gauge</strong><br />
D=4-20mA<br />
1=0.1% BFSL* SCV=Vented cable<br />
B=Nose Cone Range in PSI, BAR, 4=Sealed<br />
E=0-5VDC<br />
05=0.05%<br />
(gauge units)<br />
C=Other<br />
kPa or feet/inches X=Other<br />
F=0-10VDC<br />
03=0.03% SCN=Non-vented cable<br />
WC<br />
G=RS232<br />
ECI=Impulse® connector<br />
H=RS485<br />
X=Other<br />
(4-wire, isolated<br />
versions available –<br />
Contact Factory)<br />
ECS=SeaCon® connector<br />
ECX=Other<br />
*BFSL = Best Full Scale Line<br />
Note: Process operating temperature must be specified at the time of order placement to insure maximum performance.<br />
Dimensions:<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012<br />
www.spectresensors.com<br />
Model 800-IS Submersible Series<br />
UL/CUL Listed, Intrinsically Safe Submersible Pressure Transducer<br />
GqqqGG•<br />
o Eliminate Drift – Fused Bond sensor technology<br />
for long term stability<br />
o RFI/EMI protection on every transducer<br />
o 4-20MA, 1-5V Outputs<br />
o Temperature Compensation at sensor element<br />
FEATURES DIMENSIONS<br />
o Proprietary Fused Bond<br />
Sensor<br />
o Accuracy 0.25%<br />
o RFI/EMI Protection<br />
o Temperature compensation at<br />
sensor element. (Faster,<br />
automatic, more accurate)<br />
o Sensor Wetted Material<br />
Machined From Solid Stainless<br />
Steel Bar Stock (No Welds)<br />
o Unparalleled Long Term<br />
Stability<br />
<strong>Spectre</strong> <strong>Spectre</strong> <strong>Spectre</strong> <strong>Spectre</strong> <strong>Sensors</strong> <strong>Sensors</strong> <strong>Sensors</strong> <strong>Sensors</strong><br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
o Suitable for high shock <strong>and</strong> vibration<br />
applications<br />
o No Silicone oil, no internal o-rings, no<br />
welded diaphragms!<br />
o Ranges 0-5 PSI to 0-100 PSI<br />
o UL/CUL listed Intrinsically Safe, Class 1, Div<br />
1, Groups C & D when used with approved<br />
barrier. UL 913 (CSA 157)<br />
DESCRIPTION<br />
<strong>Spectre</strong>’s 800-IS submersible pressure transducers is a high accuracy,<br />
all stainless steel device engineered for the most dem<strong>and</strong>ing level<br />
applications in Hazardous Areas. It’s long term stability of the Fused<br />
Bond Sensor, <strong>and</strong> st<strong>and</strong>ard RFI/EMI protection provide the most<br />
rugged <strong>and</strong> reliable sensor for industrial <strong>and</strong> water management<br />
applications. The double jacketed, Kevlar core cable provides<br />
maximum protection against damage <strong>and</strong> cable collapse.<br />
Made in the U.S.A.
MODEL 800-IS Submersible Series<br />
Ordering Guide. Example: 800IS-A-(0-30)-1-D-2-SC1<br />
Please inquire for specials or options not shown<br />
A (0-30) 1 D 2 SC1<br />
Pressure Port Range Units Output Accuracy Connector<br />
A=Bullet Nose with Specify<br />
1=PSIG D=4-20mA 2=0.25%BFSL SC1=6’ vented cable<br />
17-4 PH sensor Pressure<br />
2=Inches WC E=1-5VDC<br />
(polyurethane)<br />
Range<br />
3=Feet WC R=0.5-4.5V<br />
SCX=Alternate cable<br />
B=Bullet Nose with<br />
6=Other ratiometric<br />
material – specify<br />
316 ss sensor (0-5 to 0-100 psi)<br />
type.<br />
Performance @ 25°C (77°F)<br />
Accuracy(1): 50 Million<br />
Temperature Range: -55 to 125°C (-65 to 250°F)<br />
Temperature Accuracy: ±1°F (±1°C)<br />
Environmental Data<br />
Temperature<br />
Operating: -40 to 85°C (-40 to 185°F)<br />
Storage: -50 to 125°C (-60 to 250°F)<br />
Thermal Limits<br />
Compensated Range: 0 to 55°C (-30 to 130°F)<br />
Temp Comp Zero:
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
Model M1000 – Melt-Pressure Transducer<br />
o All Inconel construction<br />
o Fluid-Filled System<br />
o St<strong>and</strong>ard 6-Pin Bayonet Connector<br />
o Industry St<strong>and</strong>ard 3.3mv/V Output (Optional 4-20mA or<br />
0-5 Vdc Outputs<br />
FEATURES<br />
o Industry St<strong>and</strong>ard Design<br />
o Accuracies 0.5% - 0.25% BFSL<br />
o RFI/EMI Protection<br />
o Zero & Span St<strong>and</strong>ard on units with 4-20mA or<br />
0-5Vdc outputs<br />
o Type “J” or “K” Thermocouple Outputs<br />
Available<br />
o All Welded, Inconel Construction<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
o 80% Output Calibration<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
o Ranges 0-1,500 PSI to 20,000 PSI<br />
o Optional Diaphragm Materials Available<br />
o Special Abrasion Resistant Coatings Available<br />
DESCRIPTION<br />
The M1000 Series is <strong>Spectre</strong> Sensor’ line of Melt Pressure<br />
Transducers utilizing the tried-<strong>and</strong>-true liquid filled capillary<br />
design. The electronics of each transducer incorporates a<br />
bonded-foil strain gauge which ensures high-accuracy,<br />
reliability <strong>and</strong> repeatability. <strong>Spectre</strong>’s Melt Transducers are<br />
100% compatible, both electrically <strong>and</strong> mechanically, with<br />
existing melt pressure transducers utilizing the 6-pin<br />
bayonet connector. There is seldom a need to re-wire when<br />
installing a <strong>Spectre</strong> M1000 Series Transducer.
Model M1000 Melt Pressure Series<br />
Ordering Guide. Example: M1001-5-6-MV-TJ-2<br />
Please inquire for specials or options<br />
M1000 5 6 MV 1 2<br />
Model Range Stem Pressure Temperature<br />
(in PSIG) Length Output Output (M1001<br />
series only)<br />
Accuracy<br />
M1000=Rigid 1.5=1,500 6=6” (std) MV=3.33mV/V 0=None<br />
5=0.5%BFSL<br />
Stem<br />
3=3,000 12=12” 4=4-20mA TJ=Type J T/C 2=0.25%<br />
5=5,000<br />
5=0-5Vdc TK=Type K T/C<br />
M1001=18” Flex 7.5=7,500<br />
P=Pt100 RTD<br />
capillary<br />
10=10,000<br />
15=15,000<br />
20=20,000<br />
Mechanical<br />
Accuracy: 50 Million<br />
Temperature Effects<br />
Max diaphragm temp: 750°F (400°C)<br />
Zero shift of diaphragm: 15 PSI/100°F<br />
Max housing temp: 250°F (120°C)<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Model M1000 101507<br />
Options<br />
M=M18X1.5 Metric<br />
thread<br />
CLxx=Non-st<strong>and</strong>ard<br />
capillary length<br />
(specify in inches)<br />
Electrical Data<br />
Excitation: 7-12 Vdc (mV output – 10Vdc recommended)<br />
9-36Vdc (4-20mA,0-5V)<br />
Option C29 – Maximum 29 Vdc excitation<br />
Element resistance: 350 ohm or 5000 ohm, ±1% of full scale<br />
Zero balance: ±10% of full scale<br />
Internal shunt calibration: 80%, ±0.5% of full scale<br />
Output load: > 100 K Ohm<br />
Physical Data<br />
Sensor: Inconel (optional tips available)<br />
Pressure Connection: 1/2 –20UNF, optional M18X1.5<br />
Electrical Connection: Bendix PTIH-10-6P (options available)<br />
Contact Information<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
440-930-5699 / Phone<br />
440-930-5668 / Fax<br />
info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
UL300 Series Non-Incendive Pressure Transducer<br />
Eliminate Drift – Fused Bond sensor technology for<br />
long term stability<br />
Sensor wetted material machined from solid stainless<br />
steel bar stock – no welding<br />
No silicone oil fill, no internal o-rings, no welded<br />
diaphragms<br />
RFI/EMI protection on every transducer<br />
Outputs: 4-20mA, 1-5 Vdc <strong>and</strong> 1-6 Vdc<br />
Pressure ranges – 0-5 PSI to 10,000 PSI<br />
St<strong>and</strong>ard accuracy of 0.25% BFSL<br />
Approved to UL1604 (CSA 213) for Class 1, Div 2,<br />
Groups A, B, C <strong>and</strong> D, Non-Incendive for use in<br />
Hazardous Areas.<br />
ANSI/ISA – 12.27.01.2003 Compliant “Single Seal” (No<br />
need for secondary seal)<br />
Optional external Zero & Span controls (specify Model<br />
UL310)<br />
<strong>Spectre</strong>’s Series UL300 <strong>and</strong> UL310 Pressure Transducers are specifically engineered with proprietary Fused Bond sensor<br />
technology to eliminate the two most common problems with pressure transducers, noise <strong>and</strong> drift. The UL300 <strong>and</strong> UL310 (with<br />
zero & span) are approved to UL 1604 (CSA 123) for use in Class 1, Div 2, Group A, B, C & D hazardous areas<br />
Performance @ 25°C (77°F)<br />
Accuracy:
<strong>Spectre</strong> <strong>Sensors</strong><br />
UL300 Series Non-Incendive Pressure Transducer<br />
Ordering guide – Example: UL300-A-(0-100PSI)-2-A-EC9-174<br />
UL300 A 0-100PSI 2 A EC9 174<br />
Model Pressure port Range Units Output Connector Material<br />
UL300<br />
A=1/4” MNPT Specify pressure 2=<strong>Gauge</strong> A=4-20mA EC9=1/2”MNPT 174=17-4 ss<br />
B=SAE-4 range in:<br />
4=Sealed B=1-5Vdc w/24” leads 316=316 ss<br />
UL310 (with zero C=1/8” MNPT PSI (5-10,000) 5=Compound C=1-6Vdc<br />
And span)<br />
6=Other<br />
ECX=Other<br />
Dimensions: Model UL300<br />
___________________________________________<br />
Dimensions: Model UL310<br />
All above dimensions may vary with options.<br />
Specifications subject to change without prior notice.<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
Wiring 4-20mA output, Cable<br />
White + excitation<br />
Black - excitation/signal<br />
Power 10-28 Vdc<br />
Wiring Voltage output, Cable<br />
Red + excitation<br />
White - signal<br />
Black - excitation/signal<br />
Power 10-28 Vdc<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
UL400 Series Intrinsically Safe Transducer<br />
Eliminate Drift – Fused Bond sensor technology for<br />
long term stability<br />
Sensor wetted material machined from solid<br />
stainless steel bar stock – no welding<br />
No silicone oil fill, no internal o-rings, no welded<br />
diaphragms<br />
RFI/EMI protection on every transducer<br />
Outputs: 4-20mA, 1-5 Vdc <strong>and</strong> 1-6 Vdc<br />
Pressure ranges: 0-5 PSI to 10,000 PSI<br />
St<strong>and</strong>ard accuracy of 0.25% BFSL<br />
Approved to UL 913 (CSA 157) for Class 1, Div 1,<br />
Groups C <strong>and</strong> D when used with suitable intrinsic<br />
safety barrier.<br />
ANSI/ISA – 12.27.01.2003 Compliant “Single Seal”<br />
(No need for secondary seal)<br />
Optional external Zero & Span controls (Model<br />
UL410)<br />
<strong>Spectre</strong>’s Series UL410 <strong>and</strong> UL440 Intrinsically Safe Pressure Transducers are specifically engineered with proprietary Fused<br />
Bond sensor technology to eliminate the two most common problems with pressure transducers, noise <strong>and</strong> drift. The UL410 <strong>and</strong><br />
UL440 (with zero & span) are approved to UL 913 (CSA 157) for use in Class 1, Div 1, Group C & D hazardous areas when used<br />
with a suitable safety barrier<br />
Performance @ 25°C (77°F)<br />
Accuracy:
UL400 Series Intrinsically Safe Transducer<br />
Ordering guide – Example: UL440-A-(0-100PSI)-2-A-EC9-174<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
UL440 A 0-100PSI 2 A EC9 174<br />
Model Pressure port Range Units Output Connector Material<br />
UL410 (with zero A=1/4” MNPT Specify pressure 2=<strong>Gauge</strong> A=4-20mA EC1=24” wiring 174=17-4 ss<br />
<strong>and</strong> span) B=SAE-4 range in:<br />
4=Sealed B=1-5Vdc<br />
Leads 316=316 ss<br />
UL440<br />
C=1/8” MNPT PSI (5-10,000) 5=Compound C=1-6Vdc EC3=Mini DIN<br />
6=Other<br />
EC9=1/2”MNPT<br />
w/24” leads<br />
ECX=Other<br />
Dimensions: Model UL440<br />
___________________________________________<br />
Dimensions: Model UL410<br />
Above dimensions may vary with options. Specifications subject to change without prior notice.<br />
Entity Parameters<br />
Vmax=28 VDC<br />
Imax=150mA<br />
C1=0.44uf<br />
L1=0<br />
Imax is the total current consumption available<br />
from the Associated Apparatus under any<br />
condition<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
UL400 101707<br />
Wiring 4-20mA output, Cable<br />
White + excitation<br />
Black - excitation/signal<br />
Power 10-28 Vdc<br />
Wiring Voltage output, Cable<br />
Red + excitation<br />
White - signal<br />
Black - excitation/signal<br />
Power 10-28 Vdc<br />
Notes<br />
1) Associated Apparatus shall provide intrinsically safe connections which meet the following<br />
parameters:<br />
Voc or Vt ≤V max Ca ≥ C1 + Cleads<br />
Isc or It ≤ Imax La ≥ L1 = Lleads<br />
2) Control room apparatus shall not generate in excess of 250V (Umax)<br />
3) Installation should be in accordance with Article 504 in the National Electrical Code,<br />
ANSO/NFPA 70<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
DC Voltage <strong>and</strong> Current Digital Panel Meters<br />
o Bright Red or Green LED Display<br />
o 4½ Digit Resolution to ±19,999 for direct readout<br />
in mV, V, mA or A<br />
o Field Scaleable From Front Panel<br />
o<br />
Ordering Guide Example: L-2-0-0-1-0-DCA<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
o Isolated 5, 10 or 24 Vdc Transducer<br />
Excitation Supply<br />
o Optional Relay, analog <strong>and</strong> Communications<br />
Outputs<br />
o NEMA 4X, 1/8 DIN, Panel Mount Case<br />
DESCRIPTION<br />
These DC voltage <strong>and</strong> current meters combine high<br />
accuracy with high read rate <strong>and</strong> a wide range of<br />
optional isolated outputs for computer interface <strong>and</strong><br />
control. Accuracy is 99.99% of full scale ±1 count.<br />
5, 10 <strong>and</strong> 24 Vdc isolated excitation outputs are<br />
st<strong>and</strong>ard to power external devices such as<br />
transducers or transmitters.<br />
Plug-in isolated analog output, dual setpoint<br />
controller, <strong>and</strong> RS-232-RS-485, Modbus, <strong>and</strong><br />
Ethernet boards can upgrade the display from a<br />
simple monitor to system interface <strong>and</strong> control.<br />
L 2 0 A 1 0 DCA<br />
Panel Meter Display Power Setpoint Analog Digital Input Type<br />
Color<br />
Output Output Interface<br />
L=1/8 DIN 1=Green 0=85-264 Vac 0=None 0=None 0=None P=4-20mA<br />
Panel Mount 2=Red 1=9-37 Vdc 1=Dual 10A 1=0-20mA 1=RS-232 P1=4-20mA<br />
contact relays <strong>and</strong> 0-10 V 2=RS-485 (factory scaled)<br />
2=Dual solid<br />
3=BCD<br />
state relays<br />
4=Modbus*<br />
*Check for<br />
availability<br />
DCV3=20 Vdc<br />
DCV1=200mV<br />
<strong>Spectre</strong> <strong>Sensors</strong>
These panel meters use UL / VDE / CSA rated screw-terminal connectors that plug into a mating PC board jack. The RS-232 <strong>and</strong> RS-485 boards use an RJ-11<br />
phone jack. The BCD board uses a 30-pin, 0.1"mass-termination ribbon cable connector.<br />
Display<br />
Type ............. Five 7-segment, 14.2 mm (.56") high<br />
LED digits plus 3 LED indicators<br />
Display color ....................................... Red or green<br />
Display range ....................... -99999 to +99999 <strong>and</strong><br />
-99990 to +99990<br />
A to D Conversion<br />
A to D rate .................. 60/s at 60 Hz, 50/s at 50 Hz<br />
Output update rate ...... 56/s at 60 Hz, 47/s at 50 Hz<br />
Display update rate ..... 3.5/s at 60 Hz, 3/s at 50 Hz<br />
Accuracy at 25°C<br />
DC volts, DC amps, ratio ....... 0.01% FS +/-1 count<br />
Thermocouple ........................................ 0.3°C max<br />
RTD ....................................................... 0.1°C max<br />
True RMS (1 to 100%, 10 Hz to 10 kHz) .... 0.1%<br />
FS<br />
Load cell ................................. 0.01% FS +/-1 count<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
DPM / 101507<br />
2<br />
Specifications<br />
Temperature Coefficients<br />
Span tempco ...................... 0.003% of reading / °C<br />
Zero tempco ..................................... 0.1 digits / °C<br />
TC reference junction .............. 0.03 degree/degree<br />
Noise Rejection<br />
CMV, DC to 60 Hz ............ Safety-rated to 250 Vac<br />
4.2 kVp per High Voltage Test<br />
CMR, DC to 60 Hz .......... ............................ 130 dB<br />
NMR to 50/60Hz line ............ 90 dB with min filtering<br />
Environmental<br />
Operating temperature ......................... 0°C to 55°C<br />
Storage temperature ......................... -40°C to 85°C<br />
Relative humidity .... 95% at 40°C, non-condensing<br />
Protection ............ NEMA 4X when mounted in panel<br />
Operating Power<br />
Voltage (std) .......... 85 to 264 Vac or 90 to 370 Vdc<br />
Voltage (opt) .................. 8 to 28 Vac or 9 to 37 Vdc<br />
Power frequency ................. DC or 47 Hz to 440 Hz<br />
Isolated Excitation Power Output<br />
Output level .............................. 5 Vdc, 5%, 100 mA<br />
10 Vdc, 5%, 120 mA<br />
24 Vdc, 5%, 50 mA<br />
Isolation (power gnd) ......... Safety-rated to 250 Vac<br />
4.2 kVp per high voltage test<br />
Contact Information<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
440-930-5699 / Phone<br />
440-930-5668 / Fax<br />
info@spectresensors.com<br />
Made in the USA
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
M100 Transducer Mount Digital Meter<br />
o Bright Red LED Display<br />
o 4-Digit Resolution (+9999/-1999), 7mm in height<br />
o Field Scalable to User’s Requirements<br />
o Transmitter Mounted, Small Size<br />
Ordering Example: M100 Display<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
M100 / 050308<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
o SIMPLE OPERATION<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
o Powered From 4-20mA Loop<br />
o Robust Construction<br />
o Sealed to NEMA 4<br />
DESCRIPTION<br />
The M100 is a universal plug-on LED display suitable for<br />
use on transducers that have a DIN 43650, connector <strong>and</strong><br />
4-20mA output. The plug-on display simply fits between the<br />
plug <strong>and</strong> socket on any DIN 43650 (Form A) connector, The<br />
power is supplied from the 4-20mA current loop signal of the<br />
transducer. The unit is user-programmable from two buttons<br />
on the front panel enabling scaling <strong>and</strong> decimal point<br />
position. All are easily configured through the menu <strong>and</strong><br />
configuration is stored in an EEPROM, ensuring that the<br />
programming is not lost in the event of power failure.<br />
The display can be rotated through 360° for use in dif ferent<br />
installation positions, ensuring flexibility.<br />
Contact Information<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
440-930-5699 / Phone<br />
440-930-5668 / Fax<br />
info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
M430 Transducer Mount Digital Meter<br />
o Bright Red 4-digit LED Display<br />
o Resolution -1,999 to +9,999<br />
o Field scaleable to user’s requirements<br />
o Transducer mounted, small size<br />
Ordering Example: M430-D-0-A-EC2<br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
<strong>Spectre</strong> <strong>Sensors</strong><br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
o Powered by transducer signal<br />
o Up to 2 switch contacts<br />
o Sealed to IP65, NEMA 4X<br />
o Rotatable display <strong>and</strong> connector<br />
DESCRIPTION<br />
The M430 is a universal plug-on LED display suitable for<br />
use on transducers that have a DIN 43650, connector<br />
<strong>and</strong> 4-20mA or 0-10 Vdc output. The plug-on display<br />
simply fits between the plug <strong>and</strong> socket on any DIN<br />
43650 (Form A) connector, The power is supplied from<br />
the voltage or current signal of the transducer. The unit<br />
is user-programmable from two buttons on the front<br />
panel enabling scaling <strong>and</strong> decimal point position. All<br />
are easily configured through the menu <strong>and</strong><br />
configuration is stored in an EEPROM, ensuring that the<br />
programming is not lost in the event of power failure.<br />
The display can be rotated through 300° for use in<br />
different installation positions, ensuring flexibility<br />
D 0 A EC2<br />
Input Switch Display Connector<br />
D=4-20Ma<br />
0=No contact<br />
F=0-10 VDC 1=One contact<br />
2=Two contact 1<br />
A=User configured EC2=DIN 43650 with<br />
X=Factory set<br />
(specify range)<br />
mate<br />
ECB=Binder 723 with<br />
mate<br />
1 Must be used with Binder<br />
connector, 4-20mA only
M430 Transducer Mount Digital Meter<br />
Technical Specifications<br />
Analog input signal: 4-20mA (two wire) or 0-10Vdc (three wire)<br />
Supply voltage: 2-wire < 6 V (voltage drop from current look)<br />
3-wire 15-36 Vdc (display wired in parallel with transmitter)<br />
Contacts 0,1 or 2 independent PNP outputs<br />
Contact rating: 125 mA, short-circuit resistant<br />
Repeatability: 100 x 10 6<br />
Delay time: 0-100 seconds (programmable)<br />
Electrical Protection<br />
Short circuit protection: Permanent<br />
Reverse polarity protection: No damage but also no function<br />
Display<br />
Type: 4-digit, red LED, 7mm height, width, 4.85mm<br />
Range: -1999 to +9999<br />
Accuracy: 0.1% ± 1 digit<br />
Update time: 0.3 to 20 seconds (programmable)<br />
Mechanical Stability<br />
Vibration: 10 g RMS (20-2000 Hz)<br />
Shock: 100 g / 11 ms<br />
Temperature<br />
Operating: -23 to +185°F (-25 to +85°C)<br />
Storage: -40 to +185°F (-40 to +185°C)<br />
<strong>Spectre</strong> <strong>Sensors</strong>, Inc.<br />
32357 Walker Road<br />
Avon Lake, OH 44012-2224<br />
www.spectresensors.com<br />
2<br />
Phone: 440-930-5699<br />
Fax: 440-930-5668<br />
e-mail: info@spectresensors.com
<strong>Spectre</strong> <strong>Sensors</strong><br />
32357 Walker Road, Avon Lake, Ohio 44012-2224<br />
Ph: 440-930-5699 Fax: 440-930-5668<br />
e-mail: info@spectresensors.com<br />
Pressure Conversion Chart<br />
To Convert Into Multiply by To Convert Into Multiply by<br />
psi atmospheres 0.06804 atmospheres psi 14.697<br />
psi bar 0.06895 bar psi 14.504<br />
psi cm water 70.308 cm water psi 0.01422<br />
psi cm Hg 5.1715 cm Hg psi 0.1934<br />
psi dBar 0.68947 dBar psi 1.4504<br />
psi dynes/sq cm 68947.6 dynes/sq cm psi 0.0000145<br />
psi ft wc 2.307 ft wc psi 0.43356<br />
psi g/sq cm 70.306 g/sq cm psi 0.01422<br />
psi in Hg 2.036 in Hg psi 0.4912<br />
psi in wc 27.68 in wc psi 0.03613<br />
psi kbar 6.89476E-05 kbar psi 14503.9<br />
psi kg/sq cm 0.07031 kg/sq cm psi 14.223<br />
psi kips/sq m 703.1 kips/sq m psi 0.001422<br />
psi kg/sq mm 0.0007031 kg/sq mm psi 1422.3<br />
psi kips/sq m 0.001 kips/sq m psi 1000<br />
psi kPa 6.89476 kPa psi 0.14504<br />
psi mbar 68.947 mbar psi 0.014504<br />
psi microbar 68947 microbar psi 0.0000145<br />
psi microns Hg 51714.9 microns Hg psi 0.000019337<br />
psi MPa 0.00689476 Mpa psi 145.04<br />
psi m wc 0.7032 m wc psi 1.422<br />
psi N/sq cm 0.689476 N/sq cm psi 1.4504<br />
psi N/sq m 6894.76 N/sq m psi 0.000145<br />
psi oz/sq in 16 oz/sq in psi 0.0625<br />
psi oz/sq ft 2304 oz/sq ft psi 0.000434<br />
psi Pa 6894.7 Pa psi 0.000145<br />
psi psf 144 psf psi 0.006944<br />
psi tons/sq ft 0.072 tons/sq ft psi 13.889<br />
psi tons/sq in 0.0005 tons/sq in psi 2000<br />
psi torr 51.7149 torr psi 0.01934