Easy mountable for many sided cuts! TKS 18/250 UV Table Saw

Easy mountable for
many sided cuts!
TKS 18/250 UV Table Saw
As special accessory available: Carbide tipped saw blade: Art.-No.: 43.111.10
Ø 250 x Ø 30 mm 24 teeth Ident-No.: 01023
Bar-Code: 4006825 431223
Logistic Informations:
Type: TKS 18/250 UV
Art.-No.: 43.406.40
Ident-No.: 01024
Bar Code: 4006825 501186
Packing: 725x575x400 mm
Carbide tipped saw blade: Art.-No.: 43.111.11
Ø 250 x Ø 30 mm 48 teeth Ident-No.: 01023
Bar-Code: 4006825 431230
Carbide tipped saw blade: Art.-No.: 43.111.13
Ø 250 x Ø 30 mm 60 teeth Ident-No.: 01013
Bar-Code: 4006825 503166
Sales unit: 1 pcs
20``: 150 pcs
40``: 300 pcs
40``HC: -- pcs
Weight: 39 kg (gross)
The table saw TKS 18/250 UV is a
machine, which is suitable not only
for stationary use, but also for mobile
application. The simpleinstallable
extension table guarantees
a wide work surface, whereby
the length support can be used in
total width. Through its belt drive the
table saw is very quiet. The TKS
18/250 UV is designed for multipurpose
application: ripping and
crosscuts of lumber, chipboard,
plywood, multiplex board and veneered
sheets. Its compact construction,
practical transport handling
and its power make ideally
suitable for us in construction sites
and for interior decorating work. The
saw can be tilted up to 45° for mitre
cuts. The cross cut fence can be left
or right of the saw blade and is
equipped for 2 different heights. It
can of course be set on either side
to -+ 45°. The splitting wedge can
be taken out for covered cuts.
Abbildungen können nicht im Serien-Lieferumfang enthaltenes Zubehör darstellen / Illustrations can contain accessories, which are not included in standard extent
of delivery. Abbildungen ähnlich, produktionsbedingte Abweichung vorbehalten / Illustration similar (in design), production-wise modifications reserved.
File: G:\Webshop\T-Produktbeschreibung\60\Originale_Englisch_PA04\4340640_01024.doc
Erstelldatum/create date: 02.09.2005 8:43 Aktualisiert/up dated: 06.12.2005

Easy mountable for
many sided cuts!
Anodizing table surface for
better anti-friction property
Tool less removable extension
table
Handle for easy transport
Easy mountable underframe
Features:
- Tool less removable extension table
- Powder coated housing
- Saw blade angle adjustment with scale
- Saw blade height adjustment
- Cross fence with angle adjustment
- Anodizing table surface for better anti-friction
property
- Saw blade protection with splinter exhaust
- Parallel stop with aluminium guide
- Lens for number scale
- Push stick with clamp
- Carbide tipped saw blade
Logistic Informations:
Type: TKS 18/250 UV
Art.-No.: 43.406.40
Ident-No.: 01024
Bar Code: 4006825 501186
Packing: 725x575x400 mm
Technical Data:
- Mains: 230 V ~ 50 Hz
- Power: 1800 watts S6 40%
- Idle speed no: 5700 min –1
- Cutting height 90 °: 73 mm
45 °: 53 mm
- Saw blade: ∅ 250 x ∅ 30 x 3,2 mm, 24 teeth
- Motor rotation range: 0 – 45°
- Cross fence tiltable: 2 x 0 – 45°
- Tool size without additional table: ca. 670 x 445 x 1100 mm
- Table size: 440 x 570 mm
- Table width extension left/right: 570 x 250 mm
- Table length extension back side: 440 x 400 mm
- Height without underframe: 360 mm
- Working height with underframe 900 mm
- Connection for splinters exhaust: Ø 35 mm
Tool: Table Saw
Sales unit: 1 pcs
20``: 150 pcs
40``: 300 pcs
40``HC: -- pcs
Weight: 39 kg (gross)
Saw blade protection with splinter
exhaust
Parallel stop with aluminium guide
Crimping flange to fix the parallel
stop
Cross fence with angle adjustment
Saw blade angle adjustment
with scale
Saw blade height adjustment
Abbildungen können nicht im Serien-Lieferumfang enthaltenes Zubehör darstellen / Illustrations can contain accessories, which are not included in standard extent
of delivery. Abbildungen ähnlich, produktionsbedingte Abweichung vorbehalten / Illustration similar (in design), production-wise modifications reserved.
File: G:\Webshop\T-Produktbeschreibung\60\Originale_Englisch_PA04\4340640_01024.doc
Erstelldatum/create date: 02.09.2005 8:43 Aktualisiert/up dated: 06.12.2005