Manual LOG SPLITTER

12
Changing the Oil Filter
This log splitter is provided with an oil filter to guarantee that the oil will be kept
clean over a longer period. After the life of the filter has expired, proceed as follows
to replace it:
• Empty the oil tank.
• Slacken pipe coupling (A) and remove pipe (B).
• Take off connecting piece (C) containing oil filter (D).
• Remove the used oil filter and properly dispose of it.
Screw a new filter into the connecting piece. Once the filter touches the filter head, add
another ¾ of a turn. Only hand-tighten the filter.
Cleaning and Sharpening Sliding Surfaces
This log splitter is equipped with a specifically treated splitting blade. After a long period of being in
use, it can happen that
guiding surfaces have experienced some abrasion and are getting dull. Using a suitable file, you
can remove material deposits and resharpen the blade. In the end, it is recommended that the
surface you have treated be moistened with some oil or other lubricant.
ENVIRONMENT, RECYCLING AND DISPOSAL
Packaging and products should be properly disposed of by being brought to the responsible disposal facility.
Carton packaging and electric equipment can be taken to a corresponding recycling materials receiving depot
or be conveniently disposed of through the manufacturer, for instance. With your cooperation, we can contribute
to protect our environment by recirculating recycled materials into the production process. Please note:
Do not dispose of this product into your dustbin. Synthetic parts are suitably labelled for plastics recycling.
SPARE PARTS AND PARTS SUBJECT TO WEAR
All spare parts and parts subject to wear may be purchased (at low cost) any time by contacting the address indicated on your
Warranty Card. Our competent service team will be happy to answer any questions that may come up and is receptive to your suggestions
and criticism.